Condition: good (used), Year of construction: 2010, Roller diameter: 315 mm Bending speed: 4.6 rpm Cjhxswglwzoy Snhjrb Working height: 1250/1100 mm Shaft length: 260 mm I-steel - edgewise: 220x30 mm I-steel - flat: 130x20 mm Tube diameter: 100x2.5 mm Square bar material: 140x80x8 mm Angle steel: 100x100x12 mm Total power requirement: 12.5 kW Machine weight: approx. 2,800 kg Space required: approx. 1,650x1,700x1,800 mm Equipment: - 3 driven rollers

Condition: good (used), Year of construction: 1998, pressure 50 t chamfer lenght 1250 mm distance between columns 1070 mm Stroke beam 100 mm max. opening beam/table 370 mm C-recess 300 mm max travel X-axes 400 mm R1 and R2 axis controlled by cnc 100 mm Z1+Z2 axes controlled by cnc manuell mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 50000 h length 1600 mm Crohswgllroxy Snhjb width 1500 mm height 2000 mm weight 2600 kg total power requirement 2,5 kW dimensions of the machine ca. 2x2x2 m weight of the machine ca. 2,56 t All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Year of construction: 2007, Condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Cohswhp N Dsxy Snhsrb

Condition: used, Year of construction: 2006, bending angle: 150 °, total length: 3,000 mm, pipe diameter: 35 mm, wall thickness: 3 mm, input voltage: 380 V, 2006 wafios BER35 Crohxy Snsvftpdjhsb

Condition: excellent (used), Year of construction: 2009, pressure 6,5 kN diameter 2 - 6 mm Rivet stamp Ø 10 x 40 Crjhxyswgkccs Snhjb throat 159 mm total power requirement 0,37 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1 * 1 * 1,5 m 2 - Hand and foot operation Sensor / Top dead center monitoring Incl. Table

Condition: used, Year of construction: 1991, pressure / t Cehxyswgi S Ns Snhjrb plate thickness / mm no. of strokes / Hub/min Condition: used The punching machine works perfectly. A functional video is available.

Condition: used, Year of construction: 2008, Pressure 130 t Bending length 3200 mm Folding column width 2690 mm Maximum stroke 445 mm Operating hours approx. 49,794 h Total power requirement 24 kW Crshxy Snowgk Hnjhob Machine weight approx. 10,900 kg Equipment: – Trumpf Tasc 6000 control system – 2 support arms in front of the machine – Foot switch – Laser safe Operating hours: Machine on: approx. 49,794 h Hydraulics operating time: approx. 31,087 h Press beam operating time: approx. 4,655 h Crafter operating time: approx. 313 h

Condition: used, Year of construction: 2000, pressure 170 t chamfer lenght 4100 mm distance between columns 3750 mm Stroke beam 215 mm 380 mm 350 mm Quick speed,inspeed 120 mm/sec bendingspeed 0-10 mm/sec Crehxy Snewglllehob opening speed 120 mm/sec X-axes 600 mm 200 mm Z1+Z2 axes controlled by cnc 0.-3600 mm Number of working hours 29150 h length 4800 mm width 2200 mm height 2650 mm weight 16450 kg total power requirement 25 kW weight of the machine ca. 16,5 t dimensions of the machine ca. 5x2,5x3 m

Condition: used, Year of construction: 1990, cutting angle 90 ° cutting length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3,0 kW Crjhxy Sowgi Nhenhjb weight 900 kg

Condition: excellent (used), Year of construction: 2007, pressing force: 20 t, travel distance X-axis: 1,250 mm, travel distance Y-axis: 2,500 mm, Servo Turret Punch Press Brush Table 20 Ton 1250X2500mm without repositioning Crohxowfnm Aoy Snhjb

Condition: excellent (used), decoiler with 3 to, width of material 590/640/690 mm, coil-inside-diam. 380 - 680 mm, coil-outside-diam. 1600 mm Cjhswhm Iwjxy Snhsrb

Condition: excellent (used), Functionality: fully functional, sheet thickness steel (max.): 3 mm, sheet thickness (max.): 3 mm, outer diameter: 80 mm, HEAVY-DUTY HIGH-PERFORMANCE TUBE MILL OTO 80.3 QTC With complete Quick Tool Change System Made by OTO MILLS PRODUCTION RANGE • Diameter range 19mm – 80mm • Thickness 0.8mm to 3.2mm • Speed Max. 150 m/min • Working direction Left - Right Scope of supply: 1. Entry Line made OTO MILLS with: • Double Uncoiler OTOAD256 -PA • Double strip peeler for opening from top/bottom • Automatic strip joiner OTO GG254 • Floop vertical accumulator 2. OTO 80.3 QTC tube mill made OTO MILLS with: • Casted Iron stand • Bottom shaft height adjustable • Reinforced motor and gearboxes 2-speed transmission • Hydraulic nuts • Double length cooling tunnel • Motorised turk-head for fast adjustment 3. Quick change rafted system OTO QTC - 2nd set of cassettes off-line including : • 1 complete cassette for forming • 1 complete cassette for fin-pass • 1 complete cassette for sizing • Quick – plug automatic cardan connections 4. 150 m/min Flying saw – High Speed cold saw OTO TCCG160 with : • Carriage motion with 70kW motor • Cutting head motion with hydraulic control • AC Rotation of the blade Crohxevr Tntey Snhsb 5. Automatic packer MAIR SQ.HEX.90.D.5.SL with emulsion draining and bundle weighting system • Possibility to make hexagonal and square/rectangular bundles • 5 modules for production of tubes 4-10m (12m for thickness >1.8mm) • Including emulsion draining, and weighting unit • 3 chains for finished bundle storage • Test tube zone, with cutting saw for the test tube 6. Automatic strapping unit SIGNODE M400 7. Zinc spraying METALISATION 250 • 1 metallisation cabin • 1 zinc spraying unit METALLISATION ENERGIZER 250 • 1 Zinc spraying gun ARCSRPAY 528E 8. Fume exhaust system • Fume exhaust conducts and exhaust covers on the required points a • Filter for fumes 9. Complete set of rolls (*See details) NEW PARTS SUPPLIED IN 2023/2024: 10. Thermatool CFI 350-VF Solid state welder with : • Automatch • Selectable frequency 250-400kHz • Thermaview control panel 11. Cooler PARKER, Model hyprechill Maxi 12. Inner scarfing hydraulical Blissenbach, with all the toolding for ID 30-50m 13. OPTRONIC CNC control unit for driving flying saw (Switzerland) 14. New Emulsion plant with : • Pump and heat exchanger • Fillters • Electrical controls and monitoring 15. New motor and electritical cabinet for accumulator 16. New motor and control for sizing section

Condition: used, Year of construction: 2005, Pressure 230 t Bending length 4250 mm Column clearance 3680 mm Cjhxy Snjwgk E Deherb Thrust 420 mm Ram stroke 445 mm TASC 6000 control system Machine weight approx. 19,200 kg Accessories/equipment: – 2 support arms – 1 bending aid – 2 stop fingers – Light barrier in front of the machine – Foot switch

Condition: ready for operation (used), Year of construction: 2014, operating hours: 850 h, Functionality: fully functional, machine/vehicle number: 14089165, Fully functional machine with a large number of punches and other accessories Crehjwhl Aajxy Snhob

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm flat steel 100 x 25 mm engine 380 V, 6,3 kW weight ca. 2.450 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Crohxy Snehxzmcjhjb +++++

Condition: excellent (used), Year of construction: 2005, pressing force: 20 t, travel distance X-axis: 1,250 mm, travel distance Y-axis: 2,500 mm, Servo Turret Punch Press Brush Table 20 Ton 1250X2500mm without repositioning Cohxyewfnlfo Snhjrb

Condition: not inspected (used), Year of construction: 1990, Functionality: fully functional, machine/vehicle number: Serie Nr. 56282, total height: 2,400 mm, total width: 1,800 mm, total length: 4,000 mm, overall weight: 8,500 kg, Equipment: type plate available, ATLANTIC HPA 30-135 / Good condition -Pressure force 135 tons -folding length 3050mm -Clearance between the uprights 2550mm -Motorized height adjustment Cohxyju Ni Izo Snherb -automatic backgauge -Foot switch / hand switch -ready for demonstration under power

Condition: ready for operation (used), Year of construction: 1993, Available immediately from location: Kunkel Hydraulic Straightening and Bending Machine Type ECO 30 Built in 1993 (New price: €20,000) Cshxy Sjwhkx Hjnhsrb Pressure capacity: 30 tons Pressure tool stroke: 250 mm Drive: 4 kW Speed: 0.5 m/min Tool height: 200 mm Multiple tools Weight: 800 kg Price: €5,500 plus VAT, ex location

Condition: used, Year of construction: 1970, Sheet width: 6040 mm Sheet thickness: 2 mm Total power requirement: 10 kW Machine weight: approx. 7,000 kg Crohewgkybjxy Snhob

Condition: excellent (used), Schlebach Mini Prof Plus Profiling Machine Cohxewhkubey Snhsrb Available immediately! The machine is equipped with: -Hand roller shears RS for cross-cutting -Roller shears LS for longitudinal cutting before profiling -Electromechanical length measurement -230V connection The price is €17,365.00 net, plus VAT, equal to €20,664.40 gross. You will receive an invoice with VAT shown.

Condition: used, Year of construction: 1976, working area Ø 12 - 75 mm Crshxyeud Alaj Snhjb 2 x 10 kW, 380 V ca. 3,20 x 1,52 x 2,15 m L x B x H total wight ca. 5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2001, Nossebro 3-Roll Bending Machine Crehowhkqioxy Snhob Capacity 1020x6.0mm Year of Manufacture 2001 Motorized forward/reverse with brake motor Manual feed Conical bending Swivel-out upper bearing Roll diameter 110mm Emergency stop via pull-cord switch 380 Volts Weight 480kg --The bearing and support (photo) are worn out and must be replaced!

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 4413 Measurements depth 5860 Measurements height 2263 Machine weight 14500 Control Unit Brand BOSCHERT Main Drive Cshjv D Rznexy Snhorb Maximum sheet thickness 6 mm Movement X-Axis Movement 3430 mm Y-Axis Movement 2670 mm Z-Axis Movement 1500 mm Additional Equipment 8 Station Automatic Tool Change tooling, system TRUMPF Rotation with stepless Index (360°) of all tools Up to 64 Tools available (with Revotools) Very short time for tool change All standard Trumpf tools may be used Clamp system for automatic material handling with 2 clamps Stepless programmable clamp positioning Automatic repositioning of the clamps with 2 sheet hold downs for sheets up to 9999 mm General Data Measurements width 4413 Measurements depth 5860 Measurements height 2263 Machine weight 14500 Control Unit Brand BOSCHERT Main Drive Maximum sheet thickness 6 mm Movement X-Axis Movement 3430 mm Y-Axis Movement 2670 mm Z-Axis Movement 1500 mm Additional Equipment 8 Station Automatic Tool Change tooling, system TRUMPF Rotation with stepless Index (360°) of all tools Up to 64 Tools available (with Revotools) Very short time for tool change All standard Trumpf tools may be used Clamp system for automatic material handling with 2 clamps Stepless programmable clamp positioning Automatic repositioning of the clamps with 2 sheet hold downs for sheets up to 9999 mm This BOSCHERT Multipunch 1500 x 3000 was manufactured in 2011. A robust CNC punching machine, it offers precision and efficiency for your sheet metal operations. Ideal for a variety of punching applications, ensuring consistent performance. Contact us for more information. Application Types Punching

Condition: used, Year of construction: 1998, Pressure 130 t Bending length 3550 mm Column width 3050 mm Stroke 250 mm Cehxy Snjwgkwtohorb Cybelec control system Machine weight approx. 11,600 kg Space required approx. 4000 x 2000 x 3000 mm Accessories/Equipment: - CYBELEC DNC 70 control system - 2 support arms - 2-hand foot control - Wila tool holders, top and bottom - Crowning - Side guards - 4 manually adjustable stop fingers - Controlled axes: y1, y2, x, R

Condition: used, Year of construction: 1996, Max. punching force: 55 tons Notching: 10 mm Hole diameter and thickness: 40x10 mm Flat steel: 300x15 or 200x20 mm 90° angle steel: 120x120x10 mm 45° angle steel: 70x70x7 mm Bar steel: 40 mm Square steel: 40 mm Strokes per minute with a 20 mm stroke: 37 /min Throat: 250 mm Machine weight: approx. 1,800 kg Cehxyewgkq Tj Snherb