Condition: new, The folding machines of the SBS series are used for bending thin sheets. Due to their compact design, they fit easily into small workshops and cover a wide range of applications with their segmented upper tool. With an adjustable angle stop, these folding machines are also suitable for the production of small series. Dcob Evsuy H U Hji Tneg

Condition: new, - Capacity 700 x 4 mm - Conical rollers - Removable top roller Djb Evi Tsh Raytsnocg - Brake motor - Foot control - Emergency stop - Documentation - 400V

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic Dsb Eovgbgasvi Tnecg 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: ready for operation (used), Year of construction: 1994, The press brake was manufactured in 1994. The working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Working length: 1250 mm Press force: 600 kN Dceb Evep R Ircsi Tneg Weight: 4000 kg Power: 10 KW

Year of construction: 1973, Condition: ready for operation (used), A complete cut-to-length line (coil line) for sheet metal processing, specifically for coils, is available. Product information: Material: stainless steel strip, max. strength at 2mm thickness: approx. 70kp/mm², max. elongation at 70kp/mm²: 50%, strip width range: 100mm-500mm, strip thickness range: 0.3mm-2.5mm, sheet lengths: 250mm/1000mm/4000mm/10000mm, strip speed range: 7.5m-30m/min, hydraulic operating pressure: approx. 80bar, pneumatic operating pressure: approx. 4bar, clarification sheet length: over 250mm: Feed and shear adjustment, over 1000mm: with mechanical intermittent operation, over 4000mm: with electrical on/off operation. 1) Decoiler, max. outer coil diameter: 1400mm, inner coil diameter: 400mm/500mm/600mm, decoiler drum spreading range: 370mm-620mm, spreading cylinder diameter: 125mm, spreading cylinder stroke: 40mm, spreading segment useful width: 600mm, max. strip weight: approx. 3000kp, max. strip tension: approx. 400kp, decoiler displacement: +/-100mm. 2) Kohler straightening machine, straightening roller diameter: 30mm, bale length: approx. 600mm, number of straightening rollers: 21, feed rate: 7.5m-30m/min, strip width range: 100mm-500mm, strip thickness range: 0.3mm-2.5mm. 3) Flying hydraulic shears, material/strip thickness/speed: to suit the system, number of cuts: 30 cuts/min, sheet length range: 250mm-1000mm, blade width: 600mm. 4) Conveyor belt, belt width: 600mm, center distance: 3500mm. Documentation available. On-site inspection is possible. Dcjb Eviswgngfj Tnog

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 5100messurements (LxWxH): 3800 x 1750 x 1700 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut) Dsb Eevap Tusvi Tnjcg

Condition: new, The folding machines of the SBS series are used for bending thin sheets. Due to their compact design, they fit easily into small workshops and cover a wide range of applications with their segmented upper tool. With an adjustable angle stop, these folding machines are also suitable for the production of small series. Dsb Evijuy H Utj Tnjcg

Condition: new, - Capacity 2070 x 1.5 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Conical roller - Swiveling top roller - Brake motor - Foot control - Emergency stop - Documentation Dcebjvkkkie Evi Tnsg - 400V

Condition: new, Year of construction: 2023, operating hours: 10 h, Functionality: fully functional, machine/vehicle number: 62538, sheet thickness aluminum (max.): 2 mm, total length: 1,500 mm, total height: 170 mm, total width: 1,200 mm, overall weight: 10,000 kg, type of input current: three-phase, For sale is the automatic box bending and panel bending machine shown in the picture. Completely new condition, selling due to lack of use. Very fast and functional bending machine suitable for bending large series of boxes, panels, thin sheets. It has an electric servo drive, so the bending result is fast. Use: for bending wardrobes, kitchen appliances, electrical cabinets and other thin sheets. Machine features: -10 axes -Total width: 1500mm -Opening (Maximum height between lower and upper tool) -Bending thicknesses: Steel (dc01): 1.5mm Stainless steel: 1mm Aluminum: 2mm -Minimum bending dimensions for parts 340mmx340mm Dsb Ejv S Exdovi Tnecg -Maximum sheet length 1600mm Weight: 10 Tons

Year of construction: 2015, Condition: ready for operation (used), Main Drive Laser power 5KW Co2 Additional Equipment Platform installation possible Machine was connected to STOPA Universal large-scale storage system (4x2 metres) Working area 4000x2000mm Closed machine frame with integrated laser unit / Movement unit for high-precision processing / Torque drive in combination with linear direct drives / Closed beam guidance / Single cutting head strategy / Cooling unit Automatic pallet changer in longitudinal direction with extended pallet pull-out / 17” touch factory screen / ergonomic control panel with or screen / Work area lighting / Position laser diode spraying device / PierceLine, FocusLine, NitroLine, PlasmaLine Co2 laser TruFlow 5000 with optimized standby mode / Maintenance-free turbo radial blower / High-frequency excitation / TASC laser control, laser power control, laser logbook function Lens cutting head with 250mm lens / Universal quick-change device (UTI) with bus connection / LensLine with status check / ControlLine: Height control and sheet outer edge detection / Lens with RFID chip Deb Eviewdzage Tnscg Laser ON / beam on 78187h/26610h This TRUMPF TruLaser 3040 was manufactured in 2015. It features a 5KW CO2 laser and has been maintained annually by TRUMPF. It can be integrated with a STOPA Universal large-scale storage system. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3040 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), throat depth: 400 mm, operating speed: 11 mm/s, table width: 120 mm, retraction speed: 113 mm/s, travel distance Z-axis: 200 mm, controller manufacturer: Cadman-B + Touch, power: 12.5 kW (17.00 HP), net weight: 6,200 kg, opening height: 400 mm, passage width: 2,050 mm, 8 assen: Y1 / Y2 / X / X' / R / Z1 / Z2 / V Bovenste type LVD-gereedschap Lager type LVD hydraulisch Optioneel: Willa hydraulische adapter (modifix)trumpf Dceb Evi Tov Rwk Asneg Capacity: 80 ton x 2500 mm Backgauge: CNC Locking speed: 130 mm/sec

Condition: new, sheet thickness: 3bending length: 1250upper roll diameter: 90sheet length: 1250 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Working Length: 1250 mm Maximum Thickness:Pre-bending: 2.5 mm Bending: 3.0 mm Yield Point: 240 N/mm² Number of Rolls: 3 Top Roll Diameter: 90 mm Minimum Bending Diameter: 130 mm Motor Power: 1.1 kW Machine Length: 1950 mm Height: 1130 mm Width: 900 mm Weight: 500 kg Options: - Back roll with motor EURO 825,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Body cover EURO 314,-- - Hardened rolls EURO 550,-- Dob Evijd Ab Tzs Tnecg We have many references!

Condition: like new (used), Motorized swivel bending machine 1520x6 mm Back stop Dcjb Evijvuhrrj Tnjg Central lubrication

Condition: excellent (used), Year of construction: 2021, operating hours: 9,154 h, Functionality: fully functional, machine/vehicle number: 1185, laser power: 4,000 W, laser hours: 1,718 h, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness copper (max.): 12 mm, sheet thickness brass (max.): 15 mm, working range: 3,060 mm, total length: 11,900 mm, total height: 3,200 mm, total width: 5,700 mm, workpiece weight (max.): 1,100 kg, positioning accuracy: 0.025 mm, overall weight: 11,000 kg, warranty duration: 60 months, power: 21 kW (28.55 HP), repeat accuracy: 0.025 mm, sheet thickness (max.): 25 mm, positioning speed: 120 m/min, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, compressed air connection: 7 bar, space requirement width: 5,700 mm, space requirement length: 11,900 mm, space requirement height: 3,200 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 100 mm, year of last overhaul: 2025, table length: 3,200 mm, table width: 1,600 mm, table height: 800 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, control cabinet height: 3,000 mm, control cabinet length: 3,000 mm, control cabinet width: 3,000 mm, cutting speed: 17,000 mm/min, Equipment: cooling unit, documentation/manual, safety light barrier, Used machine in very good and well-maintained condition, including factory warranty. Available immediately. Pick up ex works. - Laser type: fiber - Working area (X x Y x Z): 3,100 x 1,580 x 100 mm - Max. workpiece weight: 1,100 kg - Positioning speed X / Y: 120 m/min - Simultaneous positioning speed: 169 X + Y m/min - Laser power: 4 kW - Maximum iron thickness: 25 mm - Maximum brass thickness: 15 mm - Maximum copper thickness: 12 mm - Maximum stainless steel thickness: 30 mm - Maximum aluminum thickness: 30 mm - Control: BYSTRONIC ByMotion - On-time hours: 9,154 h - Operating hours: 1,718 h - Power consumption: 21 kW - Dimensions (length x width x height): 12,150 x 5,700 x 3,200 mm - Weight: 19,000 kg AIRCO Nitrogen Generation System INFINIT PSAL 15 SN AIRCO High-Pressure Compressor N2 PSAL 15 SN 32A Acceptance Report Type PSAL 15 SN Date Friday, February 25, 2022 Serial Number PN 30.110 Serial Number AIRCO 2022-21044 Year of Manufacture 2022 Customer Rotec GmbH Measurement Data in Automatic Mode Dcjb Evjwgl Elei Tnog Setpoint Actual Value Unit Network Pressure at Inlet 7.5 5.0-6.5 bar Product Purity Min. (PN) 99.9 99.85% Product Purity 2 min. (N-KAT) 99.999 99.9999% Residual Oxygen PN left 16 to 40% Residual Oxygen PN right 16 to 40% Inlet Temperature 5 to 50 21.01 °C Inlet Pressure Dew Point -3 up to 5 3.64 °C Nitrogen flow 15.0 to 16.5 8.5-13.0 Nm3/h Hydrogen flow 37.5 15-35 l/h Settings Setpoint Actual value Filling time 55 50 sec. Pressure equalization time 6 6 sec. Dead time 1 1 sec. Inlet pressure regulator 7.5 7.5 bar Fine pressure regulator PN and N-KAT 0.1 0.1 bar HP compressor cut-in pressure 295 295 bar HP compressor cut-out pressure 300 300 bar Generator run-on time 15 15 s Bundle cut-in pressure (Logo control) 270 280 bar Bundle cut-out pressure 300 295 bar Maintenance timer 4000 4000 h

Condition: refurbished (used), Year of construction: 2004, operating hours: 11,200 h, Functionality: fully functional, Machine is fully functional Dsbowglz Te Evi Tnocg

Condition: excellent (used), Year of construction: 2023, operating hours: 120 h, Functionality: fully functional, input voltage: 400 V, throat depth: 609 mm, overall weight: 1,500 kg, Hydraulic press HAEGER - 824 MSPe standard: • stable pressing force +/- 2% • system for achieving full hydraulic efficiency • Full hydraulics; PLC electric control, saving electric energy • STOP function for cylinder • TIS tool protection system • new design of the lower part of the machine, more ergonomic • memory for up to 100 programs • prepared for quick change of automatic tools optionally mounted on the machine • new MAS 350 feeder with a range from M1.5 to M10 and pin lengths up to 40 mm • MSTP-4 hand tool set - 33 elements - includes J Frame • 4-tool turret head HAEGER - 824 MSPe technical data: - adjustable pressure up to 72 kN - repeatability +/- 2% of the set force Dcobjwglc Ds Evi Tnjg - overhang 610 mm - adjustable stroke up to 220 mm - number of strokes up to 2000 strokes / h - pin range up to M12 - clinching up to 6 mm - joining materials (dedicated tools required) - oil quantity 83 L - Engine 5 HP - 400 V, 3-phase, 50Hz electrical connection Machine available immediately

Condition: ready for operation (used), total height: 2,500 mm, total length: 4,400 mm, throat depth: 250 mm, operating speed: 10 mm/s, retraction speed: 100 mm/s, travel distance Z-axis: 200 mm, controller manufacturer: 2D touch, power: 15 kW (20.39 HP), net weight: 10,000 kg, opening height: 400 mm, passage width: 3,150 mm, total depth: 1,700 mm, 7 assen: Y1 / Y2 / X / R / Z1 / Z2 / V Systeemtooling XRZ-versie met asymmetrische vingerbreedte Fiessler BendGuard Capacity: 135 ton x 4100 mm Backgauge: CNC Dob Esv Rwlgsvi Tnscg Locking speed: 100 mm/sec

Condition: new, sheet thickness: 1.8bending length: 2050upper roll diameter: 95 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor EURO 825,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Body cover EURO 432,-- - Hardened rolls EURO 940,-- Dsb Evsd Ab Tvsi Tnecg We have many references!

Condition: used, Year of construction: 2018, blade length: 3,200 mm, Equipment: type plate available, Working length: 3200 mm, adjustable cutting length, adjustable cutting gap and cutting angle, max. cutting diameter 6mm Dcobewgk N Ne Evi Tnsg

Condition: repair required (used), Functionality: unexamined, conveyor belt thickness: 8 mm, number of straightening rollers: 9, conveyor belt width: 2,200 mm, roller diameter: 95 mm, plate thickness: 8 mm, The leveler has been disassembled! Technical specifications of the RM2300/8/9 leveler Motor power: 22 kW / Leveler throughput width: 2300 mm Max. leveling width: 2200 mm / Number of leveling rollers: 9 / Leveling roller diameter: 95 mm Number of backup rollers: 22 / Lower backup rollers: 12 / Upper backup rollers: 10 Maximum sheet thickness to be leveled: 8 mm ENGLISH: Dcob Eviswgk Nvo Tnjg Technical specifications of the RM2300/8/9 leveler Motor power: 22 kW / Leveler throughput width: 2300 mm Max. leveling width: 2200 mm / Number of leveling rollers: 9 / Leveling roller diameter: 95 mm Number of backup rollers: 22 / Lower backup rollers: 12 / Upper backup rollers: 10 Maximum sheet thickness to be leveled: 8 mm

Condition: excellent (used), Boschert Compact Revo 750x1000 Trump tool system Rota Index Ball Transfer Units/Brush Tables Projection 750mm Djb Evi Tsn E Nfbjnocg Machine is in a super condition which you can see in the pictures. If you have any questions about the machine, please feel free to contact us. If you are interested, we can arrange a viewing appointment.

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, total height: 2,510 mm, back gauge travel distance Z-axis: 1,000 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 100 mm, pressing force: 35 t, overall weight: 3,250 kg, operating speed: 10 mm/s, table width: 60 mm, bending length: 1,250 mm, travel distance Y-axis: 590 mm, working length: 1,250 mm, height adjustment type: electric, rapid traverse Y-axis: 110 m/min, Servo-electric press brake SAFANDARLEY type E-Brake Premium 35-1250 ES Manufacturer Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - stroke 300 mm - CNC control in Y1 / Y2 / X / R axes - rear bumper in 2 CNC axes - X and R - 2D graphic control - model EC20 - light curtain - programmable - WILA tool system - upper clamp - WILA tool system - lower clamp possible dies 4V / 2V / 1V / type T with a base of 60 mm Machine in very good condition after technical inspection by the manufacturer. Max. pressure kN 350 Max. bending length mm 1,250 Max. construction height Q, standard (without tool adapter and table) mm 650 Max. press stroke mm 300 Upper beam positioning accuracy mm +/- 0.01 Max. correction for Y1 - Y2 programmable mm +/- 2.50 Max. Y-axis approach speed* mm/sec 180 Max. bending speed* mm/sec 10 Max. return speed mm/sec 180 X-axis positioning speed mm/sec 350 Max. range of stop movement - X axis mm 550 Max. range of stop movement (second stop point) - X axis mm 575 Max. range of stop movement (third stop point) - X axis mm 1,000 Repeatability of back stop positioning mm +/- 0.02 Max. range of movement of the stop - R axis mm 150 Repeatability of positioning R axis mm +/- 0.10 Speed of positioning R axis mm/sec 100 Weight kg 3,250 Connected power kW 11 Machine length mm 2,230 Machine width mm 1,775 Machine height - transport dimension mm 2,510 Mains voltage 3/N/PE 50Hz – 400/230V Machine connected - ready for presentation at the headquarters in Warsaw. Immediate availability Djb Evsv Eam Noi Tnscg

Condition: new, sheet length: 3.200sheet thickness: 10cutting area width: 3200total power requirements: 15weight approx.: 7700messurements (LxWxH): 3800 x 1820 x 1920 Djb Eevap Thevi Tnscg Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: as good as new (ex-display), Year of construction: 2025, The Stierli bender 420 HE offers a wide range of applications with different tool solutions. Its open design results in many advantages for the production of bent parts and straightening work. Due to its versatility, the Stierli bender is an indispensable aid in metalworking shops and metal construction. Type: Stierli bender 420 HE manual Working force: 42 tons Tool height 200mm Straightening power: HEA 180 Dcjbsd Sv Ezo Evi Tnjg *demonstration machine

Condition: new, sheet length: 3.200sheet thickness: 16cutting area width: 3200total power requirements: 22weight approx.: 10600messurements (LxWxH): 3800 x 1950 x 2080 Dcsb Evsvap Tnji Tnjg Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)