Condition: good (used), Year of construction: 1998, INDEX ABC multi-spindle automatic lathe with INDEX C 200-4 control, serial number 400923, year of manufacture 1998, operating hours estimated at approximately 52,924 hours according to management. Includes chip conveyor DGS and bar feeder FMB 5-42. Dcedpfx Asztc Rpokvek

Condition: used, Year of construction: 1996, INDEX ABC multi-spindle automatic lathe with INDEX control system, serial number 400923, year of manufacture 1996, operating hours estimated at approximately 57,805 hours according to management; chip conveyor by KNOLL; bar feeder FMB Turbo 5-42/3200; known damage and defects: defective. Dodpfx Akoztc N Esvock

Condition: good (used), Lathe, VOEST-ALPINE, spindle speeds 21 - 1,500 rpm. Dcodpsztc H Rofx Akvjk

Condition: good (used), Year of construction: 2006, Turning center SPINNER TC32-MC, control system SIEMENS Sinumerik, hydraulic bar feeder LNS Super Hydrobar, purchased in 2006. Dsdpoztc Hqefx Akvock

Condition: good (used), Year of construction: 2005, Turning machine SCHERER FEINBAU PM1-CNC, machine no. 65101, year of manufacture 2005, power requirement 4 kVA, weight 420 kg, with oil filtration system CLEANMIST CM500. Dodpfx Aksztc Eajveck

Condition: good (used), Lathe SCHAUBLIN 102N80, serial number 277444. Dcedsztc Dvopfx Akvjk

Condition: good (used), SCHAUBLIN 102 lathe, serial number 215617. Dcedjztc Dpjpfx Akvjk

Condition: good (used), SCHAUBLIN 70 lathe Dedpfx Ajztcz Ujkvjck

Condition: used, Gildemeister CTX 320 Linear V6 with Y axis New 2005. FANUC 18T . Please note that the collet chuck shown in the image will not be included, the original 3 jaw chuck will be supplied. there is also the option to supply a bar feed unit which is compatible for the machine, however currently not set up. Djdpfx Ajztb Tcjkvjck

Condition: excellent (used), Year of construction: 2006, operating hours: 37,245 h, functionality: fully functional, machine/vehicle number: 188270, Controller: Mazatrol Matrix Includes: Motoman Robot ES165-D100 – Payload 100 kg Max. machining diameter: 760 mm Max. machining length: 1524 mm Dedpeztb D Ujfx Akveck Main spindle (new in 2023): Chuck size: 12 Max. speed: 3300 rpm Motor output: 30 kW / 40.0 hp Milling spindle: B-axis travel: 225° Magazine capacity: 20 Max. speed: 12000 rpm Motor output: 19 kW / 25 hp Feed axes: Travel: X = 630 mm Y = 230 mm Z = 1585 mm Fully integrated Z-axis main and sub spindle

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0040000281C, turning length: 500 mm, spindle speed (max.): 6,000 rpm, overall weight: 4,300 kg, controller model: Heidenhain Plus IT DinPlus/TurnPlus V7, TECHNICAL DETAILS Turning length: 500 mm Y-axis travel for cross slide: ±40 mm Spindle type: Integrated spindle motor ISM 52 Plus Drive power: 20/27 kW at 100/40 % duty cycle Spindle speed: 6,000 rpm Turret: 12-position disc turret Sauter Dcsdpfsztb Adex Akvek Tool holder: VDI 30, DIN 69880-30 Tool drive: Connection/drive according to DIN 5480 MACHINE DETAILS Control system: Heidenhain Plus IT DinPlus/TurnPlus V7 Clamping system: Hydraulic collet chuck Draw tube inner diameter: 52 mm Measuring system: Direct measuring system Glass scale: X-axis Connected power: 25 kVA Rated current: max. 40 A Fuse rating: 44 A Mains voltage: 400 V Mains frequency: 50/60 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,300 kg EQUIPMENT C-axis Hydraulic spindle brake Tailstock Chip conveyor with coolant system Connection for oil mist separator including electrical connection Coolant spray gun Separate speed limiting device for the main spindle for power chucks with predefined speeds below the maximum machine speed Documentation Tool case for disc turret Ø 30

Condition: ready for operation (used), WEISSER HEILBRONN - Junior - Lathe -Center height approx. 220mm -Turning diameter over bed 440mm -Distance between centers approx. 1000mm -Spindle bore approx. 50mm -Spindle speeds 40-2000 rpm -Automatic longitudinal / cross feeds Dcedpfx Asztbhmjkvsk -Includes HEIDENHAIN ND 780 / 3-axis digital readout -FORKARDT F250 3-jaw chuck -Multifix with inserts -Electric chuck guard -L&Z spindle cover Dimensions: L x W x H 2.6 x 1.3 x 1.9 meters / Weight 1700 kg

Condition: ready for operation (used), Lead and feed spindle lathe Weiler Matador -Distance between centers: 500 mm -Swing over bed: 140 mm -Feed range, longitudinal, via belt: 0.05–0.40 mm/rev -Feed range, longitudinal, via change gears: 0.018–0.800 mm/rev -Spindle head: Size 5 -Drive: Three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Collet chuck -Forkardt F 16 wedge bar chuck -Multifix quick-change tool holder -4 turning tool holders -Drill chuck Dcjdpfxeztbfxs Akvsk -Traveling center Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg

Condition: ready for operation (used), Weiler Matador lead and feed screw lathe Djdoztbbtepfx Akvock -Distance between centers: 500 mm -Swing over bed: 140 mm -Longitudinal feed range via belt: 0.05–0.40 mm/rev -Longitudinal feed range via change gears: 0.018–0.800 mm/rev -Spindle head: Size 5 -Drive: Three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Forkardt F 160 chuck -Multifix quick-change tool holder -4 turning tool holders -Drill chuck -Follower rest Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg

Condition: ready for operation (used), L & Z Lathe WEILER Condor -Condition of guides: "Good" -Optional 3-axis digital display -Center height 165mm -Swing diameter over bed 330mm -Distance between centers 800mm -Spindle speed range 28-2800 RPM -Automatic longitudinal / cross feeds -Spindle bore approx. 40mm -Threading capabilities / Metric / Inch, etc. -Quick-change tool post Dcodpfezta Dmex Akvsk -Four-jaw chuck -Multifix base -Chip guard -Emergency stop -Documentation Dimensions: L x W x H 2.0 x 0.8 x 1.6 meters / Weight 850 kg

Condition: ready for operation (used), Weiler Matador lead and feed screw lathe Dsdpfxoztaz Eo Akvock -Distance between centers: 500 mm -Swing over bed: 140 mm -Longitudinal feed range via belt: 0.05–0.40 mm/rev -Longitudinal feed range via change gears: 0.018–0.800 mm/rev -Spindle head: Size 5 -Drive: Three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Collet chuck -Three-jaw chuck -Multifix base with inserts -2 tool holders -Follower rest Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg

Condition: ready for operation (used), Weiler Matador lead screw and feed spindle lathe Dsdpfx Asztay Ujkvsck -Distance between centers: 500 mm -Swing over bed: 140 mm -Feed range, longitudinal, via belt: 0.05–0.40 mm/rev -Feed range, longitudinal, via change gears: 0.018–0.800 mm/rev -Spindle head: Size 5 -Drive: Three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Collet chuck -Four-jaw chuck -Multifix base with inserts -3 tool holders -Drill chuck Dimensions: L x W x H: 1.5 x 0.6 x 1.2 meters / Weight: 600 kg

Year of construction: 1958, condition: ready for operation (used), Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement. Djdpfezdknwjx Akvjck

Condition: good (used), Year of construction: 1985, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 36 mm, turning diameter: 300 mm, center height: 150 mm, center width: 500 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,300 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 15 rpm, overall weight: 1,000 kg, Conventional lathe, center high 150 mm, between centers 500 mm, bore Ø 36 mm, 18 speed 15 - 3550 rpm, motor 3 kw, equipement: collet device, coolant device, 3-jaws chuck, rotating pin, drill chuck, tool post RAPID with 5 toolholders, lamp, dimensions 150x80x130 cm, weight ca. 1000 kgs Dedpfox Urmljx Akvjck

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, spindle bore: 44 mm, spindle speed (max.): 6,000 rpm, feed length X-axis: 200 mm, feed length Z-axis: 406 mm, spindle nose: A2-5, Equipment: documentation/manual, The Haas ST Series high-performance turning centers were designed from the ground up to offer setup flexibility, exceptional rigidity, and high thermal stability. The ST-10 boasts an extremely compact footprint while still providing a generous working area. Extremely compact footprint High spindle speed and rapid traverse rates Ideal for high-volume, high-production environments Dsdpoztacpjfx Akvsck

Condition: used, GOODWAY GCL-2 L LATHE CNC Control: FANUC Series O-T Max. diameter: Swing diameter: Ø 300 mm Maximum turning diameter: Turning diameter: Ø 230 mm Standard turning diameter: Ø 220 mm Max. turning length: 300 mm Turning length: 300 mm Dcjdpfxjzr Uc Is Akvok Maximum turning diameter: Ø 51 mm Maximum spindle bore diameter: Ø 66 mm Spindle mount: A2-6 Motor power (Cont./30 min.): 11/15 KW Max. speed [rpm]: 4,500 rpm Max. travel of X-axis: 125 mm Max. travel of Z-axis: 320 mm Turret: 8 stations Machine dimensions: approx. 2480 x 1300 x 1635 [mm] Machine weight: approx. 3500 [kg].

Condition: defective spare-parts repository (used), Year of construction: 1986, functionality: not functional, total height: 3,000 mm, total length: 5,400 mm, total width: 2,900 mm, overall weight: 8,600 kg, Sale from Bremen location Manufacturer Mazak Power Center SV-12 with Mazatrol CAM M – 2, with tool changer for 30 tools, with grooved clamping table and other accessories The machine is defective and is explicitly sold as a source of spare parts. The exact defect is the absence of the control board. However, many components are still complete and can be used as spare parts. A test run is not possible. Year of manufacture 1986 Technical data Dedpfxjzq H A Do Akvsck Travel distances X/Z-axis approx. 1250 mm, Y-axis approx. 550 mm Control system Mazatrol Cam M-2 Table size 1300 x 500 mm Max. table load approx. 800 kg Travel distance X-axis 1250 mm Travel distance Y-axis 550 mm Travel distance Z-axis 550 mm Spindle mount BT 40 / SK 40 Spindle speed max. 400 – 6000 rpm Tool changer 30 tools Drive power 11 kW Weight 7000 kg L x W x H 360 x 300 x 295 cm

Condition: excellent (used), Year of construction: 2022, operating hours: 2,963 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 235 mm, bar passage: 42 mm, total height: 1,700 mm, total length: 2,220 mm, total width: 1,460 mm, overall weight: 3,100 kg, Miyano BNA-42 DHY3 CNC turning center, manufactured in 2022, in very good and fully functional condition. The machine is immediately ready for operation and has only 2,963 operating hours. HIGHLIGHTS - 2 spindles: main spindle and sub-spindle - 2 turrets - Y-axis on the upper turret - Driven tools - Max. bar diameter, main spindle: 42 mm - Max. bar diameter, sub-spindle: 34 mm - Kraft & Bauer fire protection system - Extraction system - Knoll chip conveyor TECHNICAL DATA Main spindle - Max. bar diameter: 42 mm - Travel: 100 mm - Spindle speed: 6,000 rpm - Spindle motor power: 7.5 / 5.5 kW - C-axis resolution: 0.001° Sub-spindle - Max. bar diameter: 34 mm - Spindle speed: 5,000 rpm - Spindle motor power: 5.5 / 3.7 kW - C-axis resolution: 0.001° Dodpfew Igyrsx Akveck Upper turret - 8 stations - X-axis travel: 140 mm - Z-axis travel: 235 mm - Y-axis travel: 70 mm (+/- 35 mm) - Speed of driven tools: 5,000 rpm - Power of driven tools: 1.0 kW Lower turret - 6 stations - X / Z-axis travel: 140 / 310 mm Electrical supply - Total connected load: 30 kVA Dimensions and weight - Footprint: 2,220 x 1,460 mm - Machine height: 1,700 mm - Machine weight: approx. 3,100 kg The machine is located at our facility in Hornberg. Further information and additional images are available upon request.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, turning diameter over cross slide: 120 mm, turning length: 120 mm, turning diameter: 60 mm, spindle bore: 34 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 100 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 170 mm, spindle motor power: 2,200 W, total height: 1,500 mm, total length: 1,200 mm, total width: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Z-axis: 15 m/min, overall weight: 1,058 kg, spindle nose: Ø 85 mm, For sale is an extremely compact 2-axis CNC lathe, the Poly Gim MINI-88, manufactured in 2022. Due to its very compact design, the MINI-88 is particularly suitable for the economical production of small and simple precision turned parts, for small series production, and for companies with limited space. The machine can also be integrated into existing production lines in a space-saving manner. TECHNICAL DATA Machine: - 2-axis CNC lathe - Control system: Fanuc 0i-TF Plus - Year of manufacture: 2022 - Operating hours: 0 Machining range: - Max. machining diameter with chuck: 60 mm - Max. machining diameter with collet chuck: 26 mm - Turning diameter: 60 mm - Turning length: 120 mm - Bar capacity: 26 mm Main spindle: - Speed range: 100–5,000 rpm - Spindle motor: 2.2 kW at 100% duty cycle / 3 kW at 50% duty cycle Travel ranges: - X-axis: 150 mm - Z-axis: 170 mm Tool system: - Tool holder: 16 × 16 mm - Drill bar holder: Ø 20 mm - Smallest programmable unit: 0.001 mm - 8-station turret and linear system EQUIPMENT - Hydraulic 4-inch chuck - Hydraulic internal clamping device for chuck and collet chucks - Chip conveyor - Parts collector - Flat guide in the Z-axis - Central lubrication - Coolant pump - RS232 and PCMCIA interface - Bar graph display The machine can be inspected at our location in 78132 Hornberg by prior appointment. Dcodpfewpgiwex Akvsk If you have any questions, require further technical information, or would like to arrange an inspection appointment, Arnd Sauter GmbH is always at your service. Subject to prior sale and errors.

Condition: excellent (used), turning diameter over bed 260 mm spindle passage 28 mm turning length 300 mm centre height 130 mm turning speeds 125 - 2800 U/min Dodpfx Akezq Hmvjvsck total power requirement 3 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,4 x 0,6 x 1,4 m