Used Ball Turning Machine for sale (67,160)

Condition: excellent (used), Year of construction: 2023, DEMONSTRATION MACHINE For sale is a Drechselmeister Stratos FU 230 woodturning lathe with a centre distance of 680 mm and a 2 HP motor. The machine is in excellent condition – it is a barely used demonstration machine with few operating hours. Therefore, you receive the full warranty. Technical Data - Centre height: 230 mm - Swing over bed: 455 mm (up to 800 mm with optional outboard turning device!) - Centre distance: approx. 680 mm (extendable!) - Spindle thread: M33 x 3.5 (hardened) with ASR (Euro) run-out safety groove* - Spindle and tailstock taper: MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Tailstock quill travel: 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (230 V connection) - Weight: 178 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipping: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT Related terms: woodturning machine, lathe, turning machine, wood lathe, woodturning, turning chisel, wood turning, turning, machine Reference: R-A0117 Gbodpfx Acowzal Aswok

Condition: used, End machining machine, bar turning machine, bar chamfering machine, centering machine Gbsdpjyz Dtkofx Acwok Chamfering machine, pointing machine, chamfering, deburring, pointing bars and tubes Clamping range approx. 45 mm Indexable insert holder Ø 66 mm Clamping shells Ø 60 mm Spindle travel 45 mm Spindle speed 670 / 1070 / 1880 / 3000 rpm Drive power 0.75 kW Power supply 400 Volt, 50 Hz - Spindle speed adjustment via 2 V-belt stages and shifting of the V-belt pulleys - For bars and tubes - Built-in tool for bar diameter 10 mm - Mechanical spindle feed via hand lever - With only one lever movement, the clamping process, the swinging away of the stop, and the milling process are performed simultaneously. - Chamfering, deburring, centering, and pointing bars for loading magazines Dimensions (L x W x H): 525 x 540 x 525 mm Weight: 105 kg Good condition

Year of construction: 2020, condition: used, machine/vehicle number: 47523/0720, with motorized movable upper bed, center height: 475 mm, base center distance: 2,185 mm, lower bed: 3,185 mm, opening width with bed extended (only HFDM): 2,000 mm, max. turning diameter over bed: 935 mm, max. turning diameter over cross slide: 620 mm, max. swing diameter in recess: 1,600 mm, bed width: 550 mm, length of bed slide guide: 700 mm, cross slide width: 335 mm, X-axis travel: 850 mm, Y-axis travel: 2,000 mm, tailstock: quill diameter: 140 mm, main spindle motor power: 30 kW, machine weight: approx. 10,000 kg, portable SIEMENS keypad, air conditioning for control cabinet, heavy-duty faceplate diameter: 1,500 mm, PARAT quick-change tool turret, 2 MAYFRAN chip conveyors, control: SIEMENS 840 Dsl Shop-Operate, further technical data upon request. Gbodpfxsyzthko Acwjk

Condition: used, Year of construction: 1998, functionality: fully functional, Technical Data: Description: Mazak CNC lathe with chip conveyor Model: Mazak SQT 200 Control: MAZATROL PC FUSION 640T Year of manufacture: 1998 Bar feeder: KSF 60/S4 included in the price Chuck: KITAGAWA B-208 included in the price X-axis travel: 190 mm Z-axis travel: 535 mm Turning length: 538 mm Max. turning diameter: 350 mm Max. turning diameter with loader: 70 mm Max. swing diameter: 525 mm Spindle speed range: 35–5000 rpm Number of tool stations: 12 Voltage: 400/230 V 50 Hz Control voltage: 230 V / 24 V Gedpeyrrctefx Acwobk Bar loader: IEMCA VIP70 CNC Serial number: 98062218 Max. bar length: 1400 mm Min. bar length: 250 mm Max. bar diameter: 70 mm Min. bar diameter: 5 mm Weight: 450 kg Overall height: approx. 2000 mm Overall length: approx. 4000 mm / 5700 mm Overall width: approx. 1800 mm Weight: approx. 5000 kg Location: Germany, Nürtingen near Stuttgart Delivery time: Short-term available by arrangement Shipping terms: Ex location General condition: Used, very good, fully functional. From end user, first owner, not a dealer, Professionally maintained.

Condition: used, Year of construction: 2018, working diameter 140 mm turning diameter 185 mm workpiece length 120 mm control Siemens Gedox Szmpepfx Acwjbk turning speeds 7.000 U/min Vertical Turning Machine | FAMAR - BISUB 160 2G The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: BISUB1602G | BISUB160 2G | BISUB-160 2G

Condition: used, Year of construction: 2017, control Fanuc - - - - - - - - - - - - - - - - - - Gjdpeyy A Nzofx Acwebk Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant system The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL4 | VL-4

Condition: used, Year of construction: 2017, control Fanuc - - - - - - - - - Godpfjyy A N Iex Acwebk - - - - - - - - - Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant system The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL4 | VL-4

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. Gedeqvd Iqopfx Acwjbk - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2 Godpeqvd Iuefx Acwebk

Condition: used, Year of construction: 2017, control Fanuc - - - - - - - - - - - - - - - - - - Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant system Gbjdpfxsyy A Nho Acwok The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL4 | VL-4

Condition: used, Year of construction: 2017, x-axis 332 mm Gbjdpfxeyy A Nbj Acwok z-axis 625 mm control Fanuc Vertical Turning Machine | EMAG - VT 2-4 The machines are in very good condition and can be inspected under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VT2-4 | VT 2 4 | VT2 4

Condition: used, grinding wheel diameter 150 mm no. of working stations 2 Stück turning speeds 2800 U/min voltage 400 V total power requirement 0,37 kW weight of the machine ca. 100 kg dimensions of the machine ca. Gbjdpfxohuf Sws Acwek 1,05 x 0,60 x 1,40 m

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm turning height 600 mm z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V frequency 50 Hz control Siemens 840 D pl total power requirement 140 A Gbodpov Rrq Defx Acwjk weight of the machine ca. 18 t dimensions of the machine ca. 6,5 x 3,8 x 4,20 m

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,370 h, functionality: fully functional, machine/vehicle number: 40 6003, spindle speed (max.): 12,000 rpm, spindle bore: 20 mm, bar passage: 20 mm, controller model: Fanuc 31i-B, Equipment: chip conveyor, Only 3,370 spindle hours! TECHNICAL DETAILS Spindle motor power: 5,500 W Max. spindle speed: 12,000 rpm Spindle bore: 20 mm Bar capacity: 20 mm MACHINE DETAILS Control: Fanuc 31i-B Number of axes: 9 Spindles: 2 Gedpfx Aceyzhlqjwsbk Supply voltage: 400 V Dimensions & Weight Footprint: 2,000 x 1,280 mm Machine height: 1,720 mm Machine weight: 3,600 kg Operating hours Power-on hours: 32,700 h Spindle hours: 3,370 h EQUIPMENT Interfaces: Ethernet / RS232 / USB / PCMCIA Chip conveyor 3-color signal lamp Rotary cannon Workpiece picker Workpiece ejector Coolant tank Bar feeder: Iemca Elite 220 (2010) Fire protection system High-pressure unit 70 bar Muller Oil cooling unit Circuit diagram Maintenance documentation Operating manual

Condition: ready for operation (used), Year of construction: 1997, Turning diameter: 200mm, Unrun diameter: 260mm, Turning height: 200mm, Spindle clearance: 30mm, Spindle speed: 7500rpm, Power: 10kW, Torque: 49Nm. Travel X/Z: 520mm/200mm, rapid traverse X/Z: 30m/min, tool positions: 14, tool holder: VDI 30, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2100mm/2100mm/2300mm, weight: approx. 3300kg, control: Siemens Sinumerik. The X-axis of the machine makes running noises. Documentation available. On-site inspection is possible. Gbsdpfoyzhazsx Acwek

Condition: excellent (used), Year of construction: 2013, Alpha 1550XS - Cycle lathe incl. accessories Center distance is 1500 not 2000 Multifix holder 16 pieces Year of construction 2013 Top condition (really in top condition) Various interchangeable jaws (soft jaws) steady rest Gedpfx Asunruyscwsbk face plate Spindle bore 104mm Turning over bed 550mm Three-jaw chuck 315mm

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Gbedpfx Aegmi Unocwjk Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ...

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis Gbedsgqg Sgjpfx Acwjk 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ...

Condition: excellent (used), Year of construction: 1999, operating hours: 308,181 h, functionality: fully functional, Machine: WEMA PROBST RHM (Second Generation) Year of Manufacture: around 1999 Godpfx Aeydmp Socwjbk Wood Diameter: 30 ‒ 120 mm Main Motor (Cutting): 15 kW / 380 V Feed Motors: 1.5 kW Total Power: approx. 17 kW Condition: Excellent working and visual condition Additional: Several sets of brand new knives included Location: Bulgaria, Vrani kon 7940 Price: On request A demonstration can be done on site!

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Machine No.: 2219, Control system: Siemens, Model Sinumerik 840D sl, 2 spindles, spindle distance 210 mm, max. speed approx. 4000 rpm, W-tool spindle / grinding spindle 2000 rpm, max. workpiece diameter 100 mm, max. workpiece height 40 mm, 8-position tool turret, manufacturer Sauter, model 0.5.480.516, tool holder type Capto C5, workpiece automation device, manufacturer DVS, model Moduline, transfer robot manufacturer Epson, PLC system control by Siemens, display with Simatic Panel Touch, coolant system by Knoll, type KF150/950, paper band filter, chip conveyor by Knoll, type 225S-2/170 Gedjx Ahg Ujpfx Acwobk +++ Note: This machine is part of an online surplus sale! +++

Condition: used, Make: BUDERUS, Model: CNC235, Year of manufacture: 2007, Machine no.: 9030, Control system: Siemens brand, Type: Sinumerik 840D sl Powerline, 2 workspaces, 2 cross slides, X/Z traverse path, 2 spindles, Speed, C-axis workpiece spindle: 3,000 [rpm], High-frequency internal grinding spindle: (51,000 [rpm]) (for grinding arbor), Max. feeds Z 30 m/min, X 90 m/min, Max. workpiece diameter: 100 mm, Max. workpiece length: 50 mm, 2x 8-position tool turret, Tool holder: Capto C5, Workpiece automation with drag conveyor system and gripper, Coolant system, Paper band filter, Oil separator, Manufacturer: Mahle, Type: LGA601, Oil mist extraction, Recooling unit, Manufacturer: Hydac, Chip conveyor, Manufacturer: Astos Godjx Ahivepfx Acwsbk +++ Note: This machine is part of an online surplus sale! +++

Condition: good (used), Year of construction: 1999, control SINUMERIK 840D spindle head Ø 640 mm Gbsdpewzmqxefx Acwsk turning length 1000 mm

Condition: good (used), Year of construction: 2006, control Rexroth Gbedpfx Ajwzmriecwsk

Condition: excellent (used), Year of construction: 2014, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 256316, turning length: 1,000 mm, turning diameter: 730 mm, spindle motor power: 18,500 W, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, rotational speed (max.): 1,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, torque: 160 Nm, workpiece weight (max.): 680 kg, spindle nose: Cône 7/24, N°40, table load: 880 kg, number of slots in tool magazine: 120, pallet changer: automatic, Equipment: CE marking, chip conveyor, documentation/manual, We are offering this Mazak INTEGREX i500V CNC turning and milling machining center, in very good condition, year of manufacture 2014. Manufacturer: Mazak Model: INTEGREX i500V Year of manufacture: 2014 Condition: very good Gbedpfx Asyymrmjcwok If you have any questions or need more information, please feel free to send us a message or call us.

Year of construction: 1978, condition: used, machine/vehicle number: 068242, Cup wheel Ø: 175 x 60 x 51 or 125 x 40 x 51 mm Gbodpfobx Elijx Acwjk 2 grinding wheel speeds: 1450/2900 rpm table size: AT-F 205 x 345 mm space requirement: 1070 x 650 x 1180 mm Drive motor: 500 V (at 380 V 1/3 power loss), corresponding to 0.6 kW