Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 162881, turning diameter over cross slide: 410 mm, turning length: 1,000 mm, turning diameter: 340 mm, spindle bore: 80 mm, rotational speed (max.): 3,800 rpm, TECHNICAL DETAILS Swinging diameter over bed: 530 mm Swinging diameter over carriage/slide: 410 mm Distance between centers: 1,000.00 mm Maximum turning diameter: 340 mm Maximum machining length: 1,000 mm Travel X-axis: 260 mm Travel Z-axis: 1,016 mm Travel X-axis (B-axis): 139 mm Travel Z-axis (B-axis): 965 mm C-axis: 360° Control: Okuma OSP-P200LA Spindle speed: 38–3,800 rpm Speed ranges: stepless, automatic range selection Spindle nose: Option A2-8 Big Bore Gisdpfx Aey U T Dlsg Rju Spindle bore: 80 mm Main drive motor: 22.37 kW Torque: 412.17 Nm Upper multitasking turret: V-12 NC turret Lower turret: V8 (VDI) Indexing time without lifting: 0.18 s Speed of driven tools: 45 – 4,500 rpm Motor for driven tools: 7.08 kW Feeds X/Z: 333.16 / 416.56 mm/s Feed C: 3.333 rpm Tailstock spindle diameter: 90 mm Tailstock taper: MK #5 Tailstock travel: 120 mm MACHINE DETAILS Machine weight: 8,800 kg Supply voltage: 220/480 V Phases: 3-phase Frequency: 60 Hz Rated apparent power: 31 kVA Full load current: 81.7/37.5 A Largest motor rated current: 96 A Short-circuit rated values: 30/10 kA

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, turning diameter: 220 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 240 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 580 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €342,000! Due to inquiries, the auction has been extended by 2 weeks. TECHNICAL DETAILS Max. bore / max. passage: 220 mm Max. turning diameter: 220 mm Distance spindle nose – tailstock center: 614 mm Center distance: 800 mm Travel X1 and X2: 167.5 mm Travel X3: mm Travel Z1 and Z2: 515 mm Travel Z3: 580 mm Travel Y: +45 / -45 mm Rapid traverse X: 30 m/min Rapid traverse Z: 30 m/min Rapid traverse Y: 20 m/min Axis acceleration: 9.8 m/s² Main spindle Max. speed: 4,000 rpm Outer diameter front bearing: 170 mm Inner diameter front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle inner diameter: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Spindle power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Spindle torque max. / S3 25% / S1: 205 / 180 / 150 Nm Counter spindle / Sub spindle Max. speed: 4,000 rpm Outer diameter front bearing: 170 mm Inner diameter front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle inner diameter: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Torque max. / S3 25% / S1: 205 / 180 / 150 Nm Tailstock / Counter support Morse taper: CM3 Tailstock travel: 580 mm Max. force: 500 kgf Turret / Tool holder Number of stations: 24 Tool cross-section: 20×20 / 25×25 mm Tool change time: 0.1 s Clamping force at 45 bar: 3,200 kgf Driven tools Number of rotary stations: 12 Gsdpfsy Ukhhox Ag Reiu Max. speed: 12,000 rpm Power max. / S1: 14 / 10 kW Max. torque max. / S1: 42 / 32 Nm Liquids / Tanks / Supply Coolant tank, side: 510 l Coolant tank, rear: 330 l Hydraulic oil tank: 18 l Lubricating oil tank: 4 l Installed power: 87 kVA Operating voltage: 400 V, 50 Hz ±5% Optional voltage according to table: [230 V, 50 Hz ±5%] Max. ambient temperature: 35 °C MACHINE DETAILS Control model: FANUC 31iPLUS Dimensions & Weight Dimensions (L x W x H): 2,860 × 2,377 × 2,289 mm Total weight: 11,000 kg Internal volume: 1.7 m³ EQUIPMENT Coolant supply through left spindle Hainbuch AXZUG 65 collet chuck (standard) 2702/0008 for left spindle SMW-Autoblok BBD 175 3-jaw chuck 56 with a set of soft jaws for right spindle Measuring arm Hinged band chip conveyor with side discharge Upper turret station (T1) double high-pressure pump (6+15 bar, 55 l/min) Inner turret station (12) double high-pressure pump (6+15 bar, 55 l/min) Machine status light Automatic part unloader Part unloader with pneumatic opening and closing function for catching ejected parts Pneumatic part ejector for counter spindle with 100 mm stroke, stroke adjustment and end position sensor Unimag interface for bar feeder

Condition: ready for operation (used), Year of construction: 2009, operating hours: 22,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (max.): 22,000 rpm, controller model: Heidenhain 4290, Submitting a bid obligates the buyer to collect the machine by June 24, 2026! The machine will be dismantled on June 17, 2026, and then stored temporarily. The Z1 linear guide was recently renewed, and the S2 revolver drive was recently replaced. TECHNICAL DETAILS Turning length: 600 mm Turning diameter over cross slide: 410 mm Spindle speed: 22,000 rpm Tool turret: 12-position Tool holder: VDI 40 MACHINE DETAILS Gedpfx Aszcpwcog Reiu Control system: Heidenhain 4290 Operating hours Total operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h EQUIPMENT Large accessories package Powered tools from WTO Note: The seller can offer transport of the machine within Europe for an additional fee (offer upon request).

Condition: ready for operation (used), Year of construction: 2002, operating hours: 53,548 h, functionality: fully functional, machine/vehicle number: 01160014061, turning length: 630 mm, turning diameter: 420 mm, vice opening: 66 mm, control type: CNC control, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Giodpfoza D Rfsx Ag Rou Turning diameter: max. 420 mm Turning length: max. 630 mm Spindle bore: 66 mm Turret Tool head: 12 tools, Sauter VDI30 CNC control: 4290 Heidenhain MACHINE DETAILS Electrical data Voltage: 400 V Auxiliary voltage: 230 V / 24 V Frequency: 50 Hz Current: 80 A Connected power: 44 kVA EQUIPMENT C-axis with driven tools Machine chip conveyor Documentation 2 driven tool holders External reference: 598

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,744 h, functionality: fully functional, machine/vehicle number: 6100000012E, turning length: 393 mm, turning diameter: 228 mm, spindle speed (max.): 3,000 rpm, vice opening: 51 mm, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Lathe equipped with a tailstock and chip conveyor! TECHNICAL DETAILS Working range Turning diameter: 228 mm Turning length: 393 mm Distance between centers: 51 mm Spindle speed: max. 3,000 rpm Turret Turret head: Sauter VDI30 MACHINE DETAILS Electrical connection data Voltage: 400 V Frequency: 50/60 Hz Weight: 3,500 kg Operating hours Power-on hours: 20694 Working hours: 5744 EQUIPMENT Chip conveyor with coolant tank and pumps 3 driven tool holders WTO Giodpfx Ajza D Iweg Rsu 4 standard holders VDI30 Tool probe Chuck: Kitagawa 210 mm Tailstock Machine manuals External reference: 603

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: YS-2674, turning height: 1,250 mm, workpiece weight (max.): 5,000 kg, turning diameter: 1,600 mm, faceplate diameter: 1,250 mm, controller model: Fanuc 0i-TD, TECHNICAL DETAILS Faceplate diameter: 1,250 mm Max. torque on faceplate: 12,500 Nm Turning height: 1,250 mm Max. turning diameter: 1,600 mm Max. workpiece weight: 5,000 kg Table speed: 2 - 300 rpm Travel range X-axis: 1,475 mm Travel range Z-axis: 900 mm Rapid traverse: 10 m/min Gsdpfx Aezb Uy Teg Roiu Spindle taper: ISO BT50 Number of tool positions: 12 MACHINE DETAILS Control system: Fanuc 0i-TD Total power: 75 kW Dimensions & Weight Footprint: approx. 4.7 x 5.8 x 5.5 m Machine weight: approx. 32 t EQUIPMENT Tool changer magazine for 12 turning tools with BT 50 shank Note: The €5,000 for dismantling and loading applies to the preparation for EU transport. Preparation for sea transport is possible; costs upon request.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 75 mm, turning length: 325 mm, turning diameter: 180 mm, travel distance X-axis: 56 mm, travel distance Z-axis: 176 mm, TECHNICAL DETAILS Swinging diameter over bed: 180 mm Swinging diameter over cross slide: 75 mm Turning length: 325 mm Travel in X-axis: 56 mm Travel in Z-axis: 176 mm Gsdpfxozb Ekcj Ag Roiu Spindle speed range: 20 - 6,300 rpm Spindle bearing diameter in the front bearing: 50 mm Feed force in Z-direction max.: 3,000 N Spindle bore: 30 mm MACHINE DETAILS Control: Fanuc 21T Main spindle power max.: 3.7 kW Voltage: 400 V Frequency: 50-60 Hz Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,620 mm Machine weight approx.: 1 t EQUIPMENT Automatic chuck Various accessories Interface for bar feeder

Condition: ready for operation (used), Year of construction: 2001, operating hours: 42,400 h, functionality: fully functional, travel distance X-axis: 800 mm, spindle speed (max.): 5,000 rpm, turning length: 300 mm, spindle bore: 79 mm, controller model: Siemens 840D, TECHNICAL DETAILS Turning length: 300 mm Travel range X-axis: 800 mm Travel range Z-axis: 300 mm Speed range main drive: 20 - 5,000 rpm Speed range C-axis: 0 - 100 rpm Spindle bore: 79 mm Torque main drive: 200 Nm Torque at the spindle: 240 Nm Torque clamping device: 28 Nm Rapid traverse X-direction: 100 m/min Rapid traverse Z-axis: 45 m/min Tools and tool magazine Number of positions in the tool magazine: 12 Speed of powered tool max.: 6,000 rpm Tool holder: VDI 40 Clamping area in the work area (W x H): 340 x 430 mm Number of T-slots according to DIN 650: 7 MACHINE DETAILS Control model: Siemens 840D Power main spindle: 27 / 20 kW Total power consumption: 50 kVA Electrical version - voltage/frequency: 3~ / 400 V / 50 Hz Interface: yes Spindle operating hours: 42,400 h Power-on hours: 93,728 h Dimensions & Weight Machine dimensions (L x W x H): 3,200 x 3,950 x 2,800 mm Chip conveyor dimensions (L x W x H): 3,400 x 1,150 x 2,180 mm Machine weight: 8 t EQUIPMENT High-pressure coolant system (capacity: 500 l) Chip conveyor with oil mist separator / industrial filter IFM 1000CTV Workpiece loading and unloading device with 20 stations Power chuck (225 mm) Hydraulics 6x various turning tool holders 2x various tool holders (rotating) Gedpfx Ajzb Efgsg Rjiu

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Gijdpfeza Alhex Ag Reu Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Coolant tank capacity: approx. 650 l Coolant pump capacity per turret: max. 20 l/min Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Piece and time counter Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 250 mm, quill diameter: 60 mm, quill travel distance: 140 mm, spindle bore: 64 mm, spindle speed (max.): 4,000 rpm, machine/vehicle number: 2818.02, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 230 mm Travel range X-axis: 250 mm Spindle head according to DIN 55027: A6 Spindle bore diameter: 64 mm Spindle diameter in the front bearing: 100 mm Speed range: 1–4,000 rpm Feed range, facing: 0.001–1,000 mm/rev Feed range, longitudinal and thread pitches: 0.001–2,000 mm/rev Rapid traverse, facing: 5 m/min Rapid traverse, longitudinal: 10 m/min Feed force, facing: 5,000 N Feed force, longitudinal: 7,000 N Tailstock Arbor diameter: 60 mm Arbor travel: 140 mm Taper: MK 4 MACHINE DETAILS Main spindle drive Power, digital AC motor at 40% duty cycle: 16 kW Power, digital AC motor at 60% duty cycle: 15 kW Power, digital AC motor at 100% duty cycle: 12 kW Gear stages: 2 Standard chuck size 1: 200 mm Standard chuck size 2: 250 mm Gijdpfxjzb Hf Us Ag Rju Three-phase voltage: 400 V Frequency: 50 Hz Operating hours (according to meter): 4,521 h

Year of construction: 2022, condition: like new (used), Feature Specification Chuck Size 8" (Standard) Gjdsy Iqtdspfx Ag Roiu Max. Swing Diameter 550 mm (21.7") Max. Turning Diameter 380 mm (15") Max. Turning Length 550 mm (21.7") Bar Capacity Ø65 mm (2.6") Spindle Speed 4,500 RPM Spindle Motor (Max/Cont.) 18.5 / 15 kW (25 / 20 HP) Spindle Torque 169.3 N.m Number of Tools 12 Tools Travel (X / Z) 215 / 580 mm Rapid Traverse (X / Z) 24 / 30 m/min

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: Gedpfx Agey D E Rij Rjiu 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter: 170 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, ⚡ DN SOLUTIONS DOOSAN – 2024 MODEL – UNUSED ✔️ 8 UNITS ✔️ Model: LYNX2100GA ✔️ Year: 2024.06 * 2 , 2024.12 * 6 ✔️ Chuck: 6” ✔️ Machining length: 330 mm ✔️ Machining diameter: 170 mm ✔️ Spindle bore: 45 mm ✔️ Spindle power: 18.5 kW ✔️ Max spindle speed: 6000 RPM Giodoywy T Sopfx Ag Rsu ✔️ Guideways: LINEAR guideways ✔️ Control: Fanuc ✔️ Conveyor: Belt-type ✔️ Operating hours: 0 THE MACHINES ARE LOCATED IN OUR SOUTH KOREA WAREHOUSE. FOB PRICE INCLUDES PROFESSIONAL VACUUM PACKAGING. DISCOUNT AVAILABLE FOR BULK PURCHASES. Contact us for detailed photos, videos, and information – let’s talk and see how we can assist you. Muhammed Özkaya

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, DN Solutions PUMA 4100LMA Manufactured: November 2023 Only 550 hours of actual cutting time FANUC i Plus / iHMI control unit 12-station servo turret 8 live tools (driven tools) C-axis Programmable hydraulic tailstock Maximum turning diameter: Ø550 mm Maximum turning length: 2,060 mm Swing over bed: Ø790 mm Bar capacity: Ø102 mm Maximum workpiece weight: 500 kg Giedpfx Aszdartjg Rju X-axis travel: 352 mm Z-axis travel: 2,155 mm X-axis rapid traverse: 16 m/min Z-axis rapid traverse: 20 m/min 12-inch (315 mm) hydraulic chuck Spindle nose: ASA A2-11 Maximum spindle speed: 3,000 rpm Main motor power (continuous): 22 kW Main motor power (30 min rating): 37 kW Maximum spindle torque: 832 Nm Live tool speed: 4,000 rpm C-axis indexing increment: 0.001° Chip conveyor Chip bucket Automatic centralized lubrication system Coolant system Tool life management Spindle load monitoring Manual Pulse Generator (MPG) Working lamp Machine dimensions: 5,774 × 2,275 × 2,272 mm Machine weight: 11,050 kg

Condition: good (used), Year of construction: 2006, INDEX MS52C CNC Multi-Spindle Mfd. 2006 Control: Siemens 840D 6 Spindles 52mm Capacity Equipped as pictured Under power Knoll System Chip Conveyor Riedel Chiller 3.6 meter (12ft) IEMCA SIR Bar Feed SIR MS52/F Type 38 XL Godot Rkzwopfx Ag Reiu Mfd. 2005

Condition: good (used), Year of construction: 1980, Davenport Model B 3/4" Mfd. in 1980s Pickoff / Back Finish Threading Stock Reel and Stand Chip Conveyor Noise Tamer Sound Enclosure Gijdpoh I Euaofx Ag Reu Refurbished and Ready to Run Several similar machines available

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor Gsdpeq Npqmofx Ag Roiu FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 14974, Tornos MultiSwiss 6x16  Gedpfx Ajv S H Uyeg Rsiu CNC Multi-Spindle Screw Machine Mfd. 2019 6 Motorspindles  5,5 kW max. speed 8’000 RPM Spindle capacity 16 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) (requires 3003) contact us for more details

Condition: excellent (used), Year of construction: 2014, Willemin-Macodel SA Model 308B 5 Axis Machining Center Mfd. 2014 X 160 mm Y 120 mm Z 150 mm # Axis 5 Power 7 hp RPM 30,000 RPM # ATC 28 Taper HSK E32 Willemin-Macodel SA Model 308B 5 Axis Machining Center (2014) X1 6.300" Y1 4.720" Z1 5.910" A1 360.000° Giodpfsy Abcxsx Ag Rsu B1 130.000° Taper HSKE32 Rapid Feeds 1,181ipm Equipped With 5 Axis 28 Position ATC 30000 RPM Pallet Recognition Fire Protection Auto Fire Suppression Filter Mist Extraction

Condition: used, Year of construction: 2011, INDEX MS22-6 Mfd. 2011 IEMCA SIR Loader Knoll System Gjdpfx Aey Ihk Heg Reiu Equipped as pictured

Condition: used, Year of construction: 2017, INDEX C200 Mfd. 2017 Tooling in photos to be divided between 3 C200 machines available. Power-on hours: ~49,960 h Hydraulic hours: ~48,700 h Main spindle hours: ~24,800 h Counter spindle hours: ~24,000 h Stroke mm 20 Clamping pressure min.Max. bar 8/80 Piston Area pressure cm^2 57 Area piston thrust cm^2 57 pressure Force Max. CN 45,6 Tensile force Max. CN 45,6 10350989 1 INDEX C200 CNC-turning machine with 3 revolvers with Siemens-Based Index C200 control system SINUMERIK 840D SolutionLine - Rigid cast iron bed, perpendicular angle to the ground, excellent gradient chips - The kinematics of tool head movements guarantees maximum damping, reducing tool wear Gedpfxoy Um Rrj Ag Reiu - Patented plate supports with excellent properties damping and stiffness The motion of the X-axis is derived through kinematics. "double scissors" guaranteeing high dynamics - Thermosymmetric spindle Control system Index C200 Identical to SIEMENS SINUMERIK 840d SolutionLine - Modular multiprocessor control system, SINAMICS with 120 drives - Siemens Operate control box, display in language Germany - language switching WINDOWS and flat screen - 2x USB 2.0 connection on the control panel, 2x USB connection on the control panel - NCU 720.3 B PN NCK - Integrated PLC 317-3 PNDP and ET200S - Security features implemented in software through SIEMENS Safety-Integrated and ProfiSave Extended machining cycles consisting of: Einstechzyklus Freistechzyklus Gewindestrehlen with 4 point move Lighting work. space in LED design 1 flat color TFT screen, 18.5" PCT-Touch IP65 front panel 10142338 1 Main spindle dia 65 Spindle end AD140mm, ID 85mm Material passage Max. mm 65 Speed max. 1 / min 5000 Front bearing diameter mm 110 Power 100% / 40% kW 31,5/32 Torque Max. 100%/40% Nm 125/170 Continuously synchronous variable speed drives Main spindle with hollow clamping cylinder D65/20 for pincer clamping or Chuck clamping Hydraulic control with clamp metering C axis of main spindle Drive: hollow spindle motor clamping cylinder, metering system directly on the spindle Resolution 0.00014 degrees Positionsstreubreite (VDI/DGQ 3441) Psmax = 0.01 degree 11040430 pressure clamping device Clamping pressure 8-75 bar adjustable For anti-spindle clamping cylinder 10038475 1 tool carrier 1 X-axis work vehicle mm 110 X-axis quick shift m / min 30 X-axis acceleration m / s^2 9 X-axis shear force N 5000 Z-axis work vehicle mm 320 Z-axis quick feed m / min 50 Z-axis acceleration m / s^2 9 Z-axis shear force N 5000 Y-axis working vehicle mm 100 Y-axis quick feed m / min 15 Y-axis acceleration m / s^2 9 Y-axis shear force N 5000 Offer: 1702114 - 02 / 30.3.2017 CNC-lathe INDEX C200 (GP3790. 0000F) Revolver 1: 14 stations with cylindrical shank clamping D25x48 (DIN 69880), W-grooves on the revolver-higher repeated accuracy when replacing the tool. Centering plate set, V-strips, not content of delivery, must be ordered separately. Gearshift revolver AC motor, hydraulic locking A driven tool is possible in each station of the revolver 1 . Power 25% kW 10 Torque 25% Nm 16 Speed max. 1 / min 8000 10720950 1 tool carrier 2 X-axis working vehicle mm 110 X-axis quick shift m / min 30 X-axis acceleration m / s^2 9 X-axis shear force N 5000

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Giedpoxnrtcsfx Ag Rsu Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: good (used), Year of construction: 2016, machine/vehicle number: 30339, Wickman 6-57 CNC Multi-Spindle Screw Machine SN: 30339 Mfd. 2016 Siemens CNC control Motors and controls Stock stand and stock reel with enclosure (2) 2-Axis CNC Slides in Pos. 4 and 5 Single Axis CNC Turret Single Axis CNC Auxiliary slides pos. 4th + 5th Turbo Chip Conveyor Machine configured as follows Pos. 1: Mechanical cross slide, Turret open Pos. 2: Mechanical cross slide, Turret open Gedpfxjuzllts Ag Rsiu Pos. 3: Mechanical cross slide, Turret open Pos. 4: 2-Axis CNC Slide, Auxiliary single Axis Pos. 5: 2-Axis CNC Slide, Auxiliary single Axis Pos. 6: Mechanical cross slide, programable pick-up turret is single axis CNC With (6) Collet tubes Sold as-is where-is condition from current location. Buyer is responsible for shipping and rigging.

Condition: used, Year of construction: 2017, Mfd. 2017 Configuration: 2-Synchron (Dual Counter-Spindle) Production Hours: 20,000 Overview Well-equipped and maintained INDEX Werke MS22-6 configured for high-precision production, including medical components. This machine features a robust Siemens control platform, dual counter-spindles, and extensive automation for efficient, lights-out capable operation. Control & Technology • Siemens 840D SL CNC control • Dual NCU (Numerical Control Units) • TRANSMIT / TRACYL functions • ARTIS tool monitoring system • 2 additional electronic shaft preparations Configuration & Equipment • 6 main spindles • 2 SCARA counter-spindles • 2 parts catchers with conveyor belt • Bar scrap recuperator • INDEX bar guide system • IEMCA PRA bar loader • Bar feeder interface • Fire protection system Capacity & Performance • Max. bar diameter: 22 mm • Spindle speed: 10,000 rpm • Spindle power: 8.7 / 15 kW • Torque: 10 / 18 Nm Axes & Travels • Total slides: 10 • Main slides travel (X/Z): 62 / 85 mm • Counter-operation slides: 2 • Counter slide travel (X): 62 mm Additional Specifications • Number of counter-spindles: 2 • Counter-spindle speed: 10,000 rpm • Machine dimensions (L x W x H): 3330 x 1830 x 2860 mm • Weight: 5,700 kg • Connected load: 75 kVA Gijdpfx Agjy Abc Es Rsu Applications • High-precision medical components • Complex turned parts requiring multi-operation efficiency • Ideal for high-volume production environments

Condition: excellent (used), Year of construction: 2024, Mfd. 2024 Chip Blaster High Pressure pump 8 Port Programmable High Pressure Manifold Gijdpfx Agjyzkbhe Rju 1000 PSI 12 Port Coolant Manifold with Shut Off Valves Parts Catcher Sub Spindle & Back Working Attachment Spindle Drive Motor: 5.00 Nm (Nominal Torque) Max. Speed: 5000 RPM Feed Motors (X & Z): 2.1 Nm3000 RPM (X Has Break) Travel Z: 7.874″ Stroke Rapid Feed Rate: (Z) : 1000 IPM Travel X: 4.375″ Stroke Rapid Feed Rate (X): 200 IPM Cross Slides Motors: 2.1 Nm, 3000 RPM ( 4th X Motor Has Break) 1st Travel: 2.625″ Stroke 2nd Travel: 2.000″ Stroke 3rd Travel: 7.400″ Stroke 4th Travel X: 1.750″ Stroke 4th Travel Z: 4.062″ Stroke Rapid Speed: 200 IPM Specs to be verified by purchaser