Automatic cnc lathe buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Bbuqvkgt0r 78" (2000 mm) Max. between centers, 9.8" round or 7" square (250 mm round or 178 mm square) max. part dia. with revolving steady rest, 6.5 HP main motor, 0 - 4,500 RPM spindle speeds; 0.5 HP hydraulic motor. -- Automatic controlled variable speed carriage with tool post and revolving steady rest, 0 - 32 FPM max. working speed, carriage return speed 33 FPM. -- Special cutting system with: (1) Roughing & (1) finish gouge for simultaneous rou... more
9
Main spindle Max. Turning Diameter 16 mm Max. Headstock stroke 310 mm Max. Drilling capacity stationary Tool 8 mm Max. Tapping capacity stationary Tool M8 Spindle speed 500-10000 rpm Main spindle motor 3.7 kW, Continous 2.2 kW Main spindle bore Dia. 20 mm Max. Turning federate X, Z-axis 6000 mm/min Rapid feed rate X=12000 mm/min, Z=16000 mm/min Tool post 9 Tools, 12 mm x 95-115 mm Endworking attachment 3 Tools Sub spindle Spindle speed 400 -6000 U/min Spindle motor... more
6

CNC automatic lathe DMG GILDEMEISTER SPEED 20-11 linear

Strutstr 17, 73061 Ebersbach/Fils, DEGermany
6687 km
2011
excellent (used)
Main spindle Rod diameter max. 20 (25) mm Speed max. 10,000 min-1. Power 5,5 / 3,7 kW Counter-spindle maximum turning diameter 20 (25) mm Maximum speed 10,000 rpm. Power 5,5 / 3,7 kW Axis Max rapid motion of the axes 40 m / min. Maximum axis acceleration 10 m/s² Out X 1 (linear) / Y1 / Z1 40 / 240 / 240 mm Away X 2 / Y2 / Z2 310 / 120 / 300 mm Away X 3 (linear) / Y3 / Z3 75 / 240 / 150 mm Tool-holder carriage 1 tool holder system linear fixed tools / driven tools 6 / 4 number Connec... more
11
Operating hours: 58288 h Tzm0lqn Rod diameters: 26 mm Number of axes: 12 Turning length: 250 mm Engine Power: 10.7 kW Speed: 8000 rpm Machine dimensions: 3706 x 1292 x 1630mm Equipment: Control system: TRAUB TX8I Loading magazine FMB Chip conveyor Emulsion Pick-up robot 13 axes C axis on main and counter spindle more
6
CITIZEN CNC Langdrehen machine BJ. 2009; IB 2010; 9 axes control MITSUBISHI * Machining diameter / bar passage of to 32 mm * driven cross tools Bbiuqj2fc8 * The ring spindle * C-axis Accessories: FMB-. Feeder 3-36 Chip conveyor High-pressure machine 100 is not bar fire protection available, included more
6
G7rn02h The machine is in perfect condition, the mileage is minimal, one can say - was not exploited. Of the modifications - replaced feeding and clamping collet for more resistant, replaced for fast drilling. The machine was brought and launched in 2015g. (on the nameplate 2013 - the date of the contract). More than a year does not operate at all. more
6

Automatic CNC Lathe Intorex CNi 1500

Liverpool, United KingdomUnited Kingdom dealership location
5686 km
2004
used
CNC lathe with control of 3 axes plus headstock. Max turning length 1500mm Max turning dia D300 = [ 210 X 210mm] Variable spindle speed 0 - 5000rpm through inverter Saddle advance speed 0 - 16m/min Saddle return speed 0 - 40m/min Equipped with : 2 x Pneumatic centering devices for loading of pieces 1 x Hydraulic pre-rounding gouge, 2 x independant CNC contolled gouges , 1 for roughing, 1 for finishing 2 x Hydraulic dowel knives Fyaxaaufi Round steady rest Front sliding guards with electrica... more
2

CNC automatic lathe Nomura NN-20UB

Mönchweiler, GermanyGermany
6643 km
1999
good (used)
Control of Mitsubishi, Gxjhuoc0o FMB loader magazine, more
5
Control system: Mitsubishi Turning diameter: 22/28 mm Spindle speed:8000 rpm Engine power: 5.5 kW Type:revol.Head: Duplomatic 3x head/original and two new Live tools 7luyili8a Bar feeder:material IEMCA BOSS 332E Machine dimensions:1270 x 889 x 1270 mm Weight: 3500 kg Accessories: Bar Feeder more


automatic ...
daily

New machines via email!

Stay updated!
5

CNC automatic lathe TRAUB TNS 65/80

More Traub Tns 65
St.Leon-Rot, GermanyGermany dealership location
6602 km
1990
used
Clal2vvg Fabr./Fabr Traub Typ/Modell TNS 65/80 Maschinenr./Mach.Nr. 369 Baujahr/Year of make 1990 Betriebsstunden/working hours 21558 Stangenlader/Bar feed LNS Hydrobar Steuerung/Control TX8-d Spazangenfutter/collet chuck Angetriebene Werkzeuge/driven tools Teilegreifer/parts gripper more
4

CNC AUTOMATIC LATHE Tornos Deco 10

Bienne, SwitzerlandSwitzerland dealership location
6613 km
1999
used
CNC AUTOMATIC LATHE "TORNOS" DECO 2000, CAP. 10 MM 10 axes, with feeder Tornos Robobar SSF-226 no.C14111 12'423 working hours Manufacturing origin Switzerland Voltage 400V/50Hz/3ph ; 8 KVA ; 12A Netweight abt. 1500 kg Dimensions 1650x1050x1850 mm Custom position 8458.11 20 TECHNICAL DATA (standard execution) Ps9l0a Headstock (axis Z1) (+C axis optional) Bar capacity of max bar dia. 10 mm Max workpiece length according to guide bush type 60/90 mm Rotation speed of the programmable spindle ... more
4

Automatic Cnc lathe ITS NORIS 60

ZANICA, ItalyItaly dealership location
6851 km
2010
used
Cnc Mitsubishi M700 Turning ø 60 mm I° SPINDLE Bar capacity 60 mm Rpm 3000 giri/min Sr0b3g Motor power 15 Kw I° TURRET Tools holder 8 Motorized tools 8 II° TURRET Tool holders 4 more
6
- year of manufacture: 2011 - controller: Mitsubishi 60/60S D8pbkky - thread guide type: FEDEK SN 5-42 S2 (5-42mm diameter) - biggest diameter on X axis: 42 mm (with chuck: 350mm) - biggest lenght on Z axis: 380 - biggest lenght on Y axis: 200 - C axis on the main spindle - on the main spindle are 4 axial and 4 radial driven tool - maximum power: 12 kW - operating manual - weight of the machine: 3000kg - weight of the bar feeder: 1000kg more
2

CNC automatic lathe Maier ML26B

Mönchweiler, GermanyGermany
6643 km
2000
good (used)
CNC Fanuc, FMB, feeder good condition Bcam2qwzci more
6
NC AUTOMATIC LATHE "TORNOS" DECO 2000, CAP. 13 MM Lader Robobar SSF-226 Lt9tv Inventory no.2150013, machine equipped as follows : Machine with 10 axes Without S3/S5/S6 With revolving guide-bush No ejector Various tool-holders and accessories more
6

CNC AUTOMATIC LATHE TORNOS 8SP

Bienne, SwitzerlandSwitzerland dealership location
6613 km
2006
used
CNC AUTOMATIC LATHE "TORNOS" DECO 8SP Be07ugk90 spindle max 15'000min-1, 5 axes, Fanuc 32i, feeder Mini Boss325A no.1200641N02 more
1

AUTOMATIC CNC SHAPER (SHAPE & SAND) UNIQUE 4500

North Carolina, United StatesUnited States dealership location
518 km
2006
used
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Etbidgf UNIQUE 4540 Shape and Sand (CNC) with (4) stations. -- General Description: (4) shaper heads of which (2) can be used for sanding. Ridged one-piece welded steel frame double spindle shaper (CNC controlled jump cope & cope) with two 45° tilting sanding stations. All heads are floating and displaced via rub collars making this machine suitable for shape and sand on pre-hogged arched raised panels. Jump cope on first shaper eliminates tear out o... more
8
CINCINNATI MILACRON 250 FALCON Type CNC lathe Year of manufacture 1998 Length of filming max 490 mm diameter of filming on the bench 300 mm diameter of shoot above the bench 590 mm Passage in bar 80 mm turret 12 station VDI 40 Type cn acramatique A2100E EQUIPMENT Itzds87 Against advanced hydraulic conveyor has Chuck SMW autoblok 250BB chips Door tools provided 18 part 1 provided Chuck SMW autoblok 250BB Lot 1 mors With documentation d4utilisation etc... Video available more
6

CNC Lathe WEILER DZ 26-V4

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1995
used
turning diameter 135 mm Cxnzxov turning length 160 mm control Siemens weight of the machine ca. 1.6 t dimensions of the machine ca. m more
3

CNC Lathe MONFORTS MNC 602 E

Mönchengladbach, GermanyGermany dealership location
6371 km
1988
used
turning diameter:*320 mm 7amicqzal turning length:600 mm control:SIEMENS powered chuck diameter:200 mm Tool bore:VDI 30 turning diameter over bed slide:160 turning speed range:112 - 5000 U/min spindle bore:42 mm turret (x-stations):12 total power requirement:30 kW weight of the machine ca.:8,1 t dimensions of the machine ca.:6 x 4 x 2,5 m with CNC SIEMENS 810 T control C-axis, driven tools hydrostatic round guiding in z-axis tailstock chip conveyor, coolant device with extensive accessori... more
6

CNC Lathe DOOSAN PUMA MX 2100LST-GL

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
2008
used
chucking diameter 210 mm Swinging diameter over bed 750 mm Swing diameter over bed cross slide 650 mm bar material dia. 65 mm turning length 1020 mm Main spindle (left) speed max. 5000 U/min Main spindle (left) Spindle passage 68 mm Main spindle (left) Drive power 22 kW Main spindle (left) Torque 318 Nm control Fanuc 31i - Model A spindle hours 25.388 h Bcy8toi2cz + Portal loading unit more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Nccxn UNIQUE 2700 CNC CNC Door ShaperCNC controlled maching center for Raised Panel [...] with: -- (1) CNC controlled 5" stackable vertical spindle (max. 4 tools per stack), 7.5 HP belt driven; max. clamping thickness 2-1/2" and 6" max. cutter head diameter. -- "X" Axis of spindle travels 81" on (2) THK rails with ball screw movement, "Y" axis with 5" travel on THK rails with 5" max. workpiece overhang, "Z" axis with 5" max. travel on THK [...]: -- Wind... more
6
Tour CN MAZAK QT15 brand: Mazak Model: quick turn 15 Year: 1988 CNC: MAZATROL CAM T2 Maximum machining diameter: 300 [mm] Maximum machining length: 450 [mm] Bbqi3epjc7 Max bar diameter: 51 [mm] Maximum spindle speed: 4 500 [RPM] Power PIN: 15 [kW] Weight: 4 500 [kg] more
3

CNC Lathe OKUMA Howa Act 2 SP 3

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1995
used
turning diameter 300 mm Bazo0ddmzh turning length 250 mm control OSP 5000 weight of the machine ca. 7 t more
3

CNC Lathe TRAUB TND 360

More Traub Tnd 360
Mönchengladbach, GermanyGermany dealership location
6371 km
1988
used
turning diameter:*360 mm turning length:800 mm control:TX 8 turning diameter over bed slide:160 spindle bore:90 mm spindle turning speed range:1 - 3150 U/min feed - longitudinal/cross:0 - 10000 mm/min tailstock quill taper MT:4 8yxm9ai tailstock quill stroke:110 mm total power requirement:38 kW weight of the machine ca.:3,5 t dimensions of the machine ca.:3,4 x 1,9 x 1,8 m - CNC control Traub TX 8 - 10-fold revolving head - tool preseting device - coolant device, chip conveyor more
3
bore diameter 26 mm swing diameter 140 mm DIN 52022 Gr. 4 spindle diameter in front bearing 55 mm work height max. 1050 mm turning speed range 205 - 3280 U/min Uqvqibp7u rapid speed 2 m/min feed speeds infinitely variable 0 - 1200 mm/min number of slides 3 total power requirement 3,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,80 x 1,00 x 1,60 m stepped drive, with autom. electro-magnetic speed control for drive with 3 slides, with electrohydr. control acc.: variou... more
1
Elect./Voltage: 208/480 V, 60 Cy, 3 Ph Gvky2o UNIQUE 2700 CNC CNC Door ShaperCNC Controlled Machining Center for Raised Panel [...] with: -- (1) CNC controlled 5" stackable vertical spindle (max. 4 tools per stack), 7.5 HP belt driven; max. clamping thickness 2-1/2" and 6" max. cutter head diameter. -- "X" Axis of spindle travels 81" on (2) THK rails with ball screw movement, "Y" axis with 5" travel on THK rails with 5" max. workpiece overhang, "Z" axis with 5" max. travel on THK [...]: --... more
5
turning diameter:160 mm turning length:250 mm control: swing diameter:250 mm spindle turning speed range:6000 1/min swing diameter over face slide:160 mm centre distance:300 mm turret (x-stations):12 VDI 20 pos. total power requirement:7,5 kW weight of the machine ca.:3 t F078g0qgc dimensions: m CNC lathe, live tools, coolant tank, tailstock, chipconveyor, more
6

CNC Lathe INDEX GE 42NC

More Index Ge 42
Wilbertoord, NetherlandsNetherlands dealership location
6307 km
used
turning diameter 370 mm turning length 400 mm control Philips weight of the machine ca. 3 t Bcavndofw8 more
6

CNC Lathe INDEX GE 65

More Index Ge 65
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
used
turning diameter nominal ca. 175 mm control Siemens 810 D Total weight, approx. 3600 kg height 1800 mm turning speed range 45 - 4000 U/min work spindle diameter 110 mm Hp033fsgw spindle bore 80 mm hollow clamping cylinder Hub 35 travel of compound slide-rest Z - 400 mm travel of compound slide-rest X - 150 mm dia. of quill 55 mm quill stroke max. 60 mm tool holder 14 - complete retrofit in 2001 more
1
turning diameter ca. 100 mm turning length 100 mm number of slides 2 spindle hollow 42 mm face slide travel 55 mm turning speed range max. 5000 U/min Uqvp8qkjt greates pass round over bed 240 mm feed speeds 20 - 400 mm/min rapid speed 6 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t range L-W-H 2,80 x 1,20 x 2,00 m with connector field control more
1

CNC LATHE AKIRA SEIKI ASL-35

North Carolina, United StatesUnited States dealership location
518 km
1998
used
Elect./Voltage: Bbu2ysaf9z AKIRA SEIKI ASL-35 CNC Lathe -- Chuck diameter 10". -- Bar capacity 2.95". -- Swing over bed 25". -- Distance between centers NA. -- Max Machining Diameter 17". -- X- Axis travel 8" . -- Z-Axis travel 23.2". -- Max. spindle speed 4,000 RPM. -- Main motor 25 HP. -- Number of tool positions 12. -- Dimensions approx 115" x 75" x 75". -- Weight approx 13,100 [...] with: -- GE Fanuc 0-T control -- 10" 3-Jaw hydraulic chuck -- Tailstock -- Chip conveyor more
1
Turning length 1500mm Turning diameter 600mm Bczllxtwvt Spindle speeds 35-3000 rpm Input 40 hp Fitted with 40 Automatic Tool Change more
6
faceplate diameter 1400 mm swing diameter 1450 mm turning height 1630 mm max. workpiece weight 6300 kg reus 10 - 315 U/min Bbmisiyeam cross rail adjustment - vertical 1250 mm max. ram stroke 1100 mm Control Siemens 840 D total power requirement 0 kW weight of the machine ca. 0 t dimensions of the machine ca. 4,35 x 2,85 x 5,1 m * general reconditioned and modernized in 2001 * CNC - control by SIEMENS SINUMERIK 840 D * chip conveyor machine wasnt in use in production since 2008 more
6

CNC Lathe Ouick Tech AT25 Smart

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
2002
used
turning diameter 60 mm turning length 100/225 mm control Quick Tech Control-Mitsub Bcoq0jlycz x-axis 200 mm y-axis 335 mm z-axis 255 mm weight of the machine ca. 2,5 t dimensions of the machine ca. 2650x1450x1700 m more
4

CNC Vertical Turning Lathe Hitachi Seiki CS-20

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1998
good (used)
Maximum turning diameter 350 mm. Maximum swing 350 mm. Maximum spindle bore for bar work 59 mm. Spindle speed 30-5000 Rpm. Maximum turning length 150 mm. Number of tools on turret 12. Ekdo2isdi Tool type VDI 40. CNC control Seiki Seikos Ʃ10L more
3

CNC Lathe BRINKMANN DCF 175

Bühl, GermanyGermany dealership location
6593 km
1992
used
turning diameter 220 mm turning length 250 mm control SIEMENS SINUMERIK 820 T swing diameter 380 mm chucking diameter 250 mm x-travel 200 mm z-travel 250 mm spindle turning speed range bis 4000 U/min rapid travel - longitudinal/face 15 m/min total power requirement 27,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,2 x 2,9 x 2,2 m Ey8p8kj acc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolant more
1
Elect./Voltage: 280/3/60 Gvky8s WEILER E50 CNC Teach & Learn Engine Lathe -- Center distance 80”. -- Height of centers 11”. -- Swing over bed 22”. -- Swing over cross slide 13”. -- Width of bed 13.7”. -- Travel of cross slide 13.4”. -- Travel of top slide 5.5”. -- Length of cross slide 27.5”. -- Width of cross slide 8.6”. -- Spindle hole 2.6”. -- Main motor 13HP continuous /17HP 30 minute rating. -- Speed range (... more
5

CNC Lathe Doosan S 550LM

Heilbronn, GermanyGermany
6642 km
2004
good (used)
Fanuc 21 iTB CNC control 3-jaw chuck diameter 380mm driven tools C-axis 12 fold turret head tailstock chip conveyor high pressure pump up to 80bar coolant device Technische Daten / technical details: max. Umlauf- über Bett / max. swing  over bed 710 mm max. Drehdurchmesser / max. turning diameter 480 mm max. Drehlänge / max. turning length 1130 mm Planweg (x) / cross way (x) 300 mm Längsweg (z) / longitudinal way (z) 1150 mm Spindelbohrung / spindle hole 102 mm Drehzahlbereic... more
6

CNC Lathe OKUMA LB9

More Okuma Lb 9
Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1989
used
turning diameter 42 mm turning length ? mm control Okuma OSP 500 L-G Nezc2 weight of the machine ca. 5 t more
3

2 Axis Teach Inn/ Cyclecontr CNC Lathe Gildemeister Nef Plus 710

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1997
good (used)
M8ugr Maximum swing over bed 710 mm. Spindle speed 3 steps. 16-180 Rpm /56-610 Rpm / 160-1800 Rpm. Centerheight 345 mm. Maximum turning length 2000 mm. CNC Control Grundig Manual Plus more
3

CNC Lathe WEISSER-HEILBRONN JUNIORMAT

Bühl, GermanyGermany dealership location
6593 km
1990
used
turning diameter 475 mm turning length 1000 mm control SIEMENS SINUMERIK 810 T turning dia. over face-slide 260 mm centre height 235 mm spindle bore 63 mm Baxkio8k turning speed range 10 - 2250 U/min feeds 0,001 - 50 mm/U rapid traverse X-axis 5 m/min rapid traverse Z-axis 8 m/min bed width 335 mm tailstock quill diameter 80 mm tailstock quill stroke 150 mm workpiece weight max. 750 kg face slide travel 300 mm tailstock taper MT 5 weight of the machine ca. 3,0 t dimensions of the machine ca. ... more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Itf8fct WARNER SWASEY CNC BIG BORE LATHE. -- Specifications: Z-axis travel 72", X-axis travel 22", swing over bed 32", spindle bore dia. 13.125", speed range 9 - 133 RPM & 26 - 400 RPM, max. length 72", swing over saddle 32", max turn dia. 32". -- Equipped with: 36" 3-jaw chuck, (6) tool post tools, 75 HP motor, TECHNICS MENTOR 2-spindle drive. -- Unit had a $100K CNC retrofit in 2009 with FAGOR 8055 control. more
5

CNC Lathe RJASAN 1 H 65 RF 3-5

Monheim, GermanyGermany dealership location
6403 km
2004
used
turning diameter 650 - 1000 mm turning length 5000 mm E8glmw2io control CNC R+D Uniturn turning diameter over bed 1.000 mm turning diameter over bed slide 650 mm centre distance 5.000 mm workpiece weight max. 8.000 kg x-axis 700 mm z-axis 4.500 mm faceplate turning speed range 5 - 500 U/min weight of the machine ca. 15,8 t with chip conveyor, 1 steady rest, 1 faceplate, documentation more
5

CNC Lathe INDEX GFG250

More Index Gfg 250
Göppingen, GermanyGermany dealership location
6699 km
1987
used
turning diameter 250 mm turning length 500 mm Y33ue3zb7 control Siemens Sinumeric System total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more


automatic ...
daily

New machines via email!

Stay updated!

to

to

Edit search
AUTOMATIC CNC LATHE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close