Used Dosing systems & chemical batchers for sale (12)

Condition: as good as new (ex-display), Year of construction: 2020, Modular high throughput printing device with environmental control (single cell only) with 4 liquid channels with the ability to scale to 8 liquid channels that deliver reagents ability to deliver 10pl to 800pl in a single drop depending on the Piezo dispense capillary (consumable) used. The unit offers consistent and highly reproducible reagent delivery with a mechanical precision of the gantry movement is less than 3 µm, and the spot positioning accuracy is typically less than 6 µm. Notes - Csbsvmktpou Taw Eogt 1. Scienion will be needed to complete setup/programming IP of resonators still on the equipment (find resonator image) 2. 2 Units available for sale - 1 used; 1 unused 3. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Acknowledgement and disclaimer The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: used, Year of construction: 2015, Manufacturer: Packinov Model: 1015 D Year: 2015 Type: Semi-automatic electric dosing machine Volume digitally adjustable Dosage cylinder available: 2 blocks, max. 85 ml. 3 x hoppers, 1 of which is double-jacketed Cgsbu Taewbwd Aow Eot Mixer for hopper Temperature controller Foot-operated actionner Control panel Height-adjustable frame Machine dimensions: 110 x 100 x 190 cm

Condition: used, Technical details: circulating medium: Druckluft dimensions L x W x H: 0,9 x 1,3 x 1,9 m Plastic granulate dosing sheet steel construction with angular steel base external operation supply tank: Cgjbuou Nu Sfo Taw Ejt -Size L: 1250 x W: 670 x H: 680mm -content approx. 400Liter -granulate supply connection 1x blind plug and 1x pipe 300/400MM; filling via 2x connection inch over ceiling -operation discharge: regulation by connection of abrasive dosing valve (1x open+1x closed) and compressed air connection 1 1/2" x 450mm Dosing tank: -2 tank size Ø 300 x 560mm -outlet 1x1 1/4" and 1x1 " -equipment 1x level measuring unit each -air connection 2" -Water separator model F602G10WJ/N, pressure max. 17 bar / 250 PSI; temperature max. 65°C / 150°F *

Condition: ready for operation (used), Year of construction: 2004, operating hours: 2,000 h, Functionality: fully functional, total width: 4,000 mm, total length: 4,000 mm, total height: 4,000 mm, empty load weight: 1,500 kg, compressed air connection: 6 bar, Crushed styrofoam from the shredder (a part of the machine) or styrofoam in pellet form as raw material is transported to the silo above the machine. From the silo, the styrofoam passes through a section of the machine where it is sprayed with an additive and then dosed into bags for packaging. The additive tank contains agitators and heaters, and the additive is pumped from it up to the sprayers in the upper part of the machine. The machine, in addition to automatic and manual dosing options, also features a liter counter for additive consumption and a counter for filled bags. Csbsv A Squsu Taw Eegt

Condition: used, Tank capacity (litres) 100 Motorized pumps Up to 2 external each tank Dosing capacity Max. 50 cc/sec. per pump Remote technical support Cgsbovpfhysu Taw Est

Condition: good (used), Dosing system For containers Article number: 10453 Item number: 10454 Material: 1.4301 / AISI304 Dimension: total width: 1250mm total length: 2230mm Cebu Tajfdgrcow Esgt total height: 2000mm

Condition: good (used), K-tron Soder double screw feeder. with COPERION KCM IP65 K-tron Controller. Bowl diameter: 220mm x 270mm. In good working order. It comes with two sets of screws. Type: T35 Csbu Tawolc N T Re Esgt

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD – SPA – class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weighing scale Hopper: 2 litres Filling of doser storage hopper: Manual Cebusv S Iywe Taw Esgt Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and – tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g Stores 800 different dosing recipes Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V – single-phase Doser / control box connection: direct Materials in contact with the ingredient : 304L electro-polished stainless steel. GMP-compliant construction Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: used, Dosing system mixing system Transitube 2 storage bunkers with dosing screws Mixing unit mixing screw with outlet Fitted with control cabinet (operation unknown) See our other advertisements VMA Wekerom Cobjtmprbsu Taw Esgt

Condition: excellent (used), Functionality: fully functional, total width: 1,500 mm, total length: 3,000 mm, total height: 2,850 mm, Chemical supply station Lotus Used goods, good condition, see pictures Including control unit Length 300 cm Width 150 cm Height 285 cm Power 0.5 kVA Year of construction 10/2007 Cebu Tetwy I Ijaw Eegt Already dismantled 3 pieces available Negotiated price: € 2.500,-- net ex stock Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: excellent (used), Year of construction: 2021, Bag holder is designed to hold 2400L with overage 2800L. We will need to add vertical wall to the unit (14”) to give the true 3000L hold up volume to match the existing units purchased before Cone Craft’s bottom gate can be easily and inexpensively replaced if the bag or tubing configuration changes in the future. Option: ConeCraft designs and manufactures bag holders for use with any single use bag. Our customers often use more than one brand of disposable. Bin internal 55” x 47” x height Type 304L stainless steel, product contact frame 304L Body is constructed of 12 and 10 gauge. Body panels and component parts are water jet cut for precise fit. Internal and external finish is mechanical polish to a 35 μin Ra maximum, Internal welds ground smooth, external welds “as Laid” Jacketed (dimple style) on 3 sides and bottom of bin Color in the heat affected zone is removed, Csbustqu Hzj Taw Esgt All welds internal are polished to 25ra μin. All external welds as laid. All surfaces are cleaned and passivated inside and out.

Condition: used, Name: Powder Feeder Cgsboiv Ic Eju Taw Est Manufacturer: K-Tron / Coperion GmbH Type: K-ML-FB-130QC Year built: Unknown Speed: Mixer speed: 5,6 rpm Content: 75 liters Driving force: 0.25kW. - Mixer drive 0.25 kW Dimensions: Length 800mm x Width 700mm x Height 1200mm Empty weight: 100 kg Technical doc.: No Message: Mixing drive 0,25 kW, speed 5,6 rpm Condition: Used Price: On demand