turning diameter 200 mm
turning length 120 mm
turning height 120 mm
control SINUMERIK 840D
x-axis 400 mm
z-axis 280 mm
rapid power traverse in X-and Z direction 60 / 30 m/min
feeding force 10 / 8 kN
turning speeds 3000 U/min
front bearing 90 mm
total power requirement kW
weight of the machine ca. 11 t
dimensions of the machine ca. 4,1 x 2,2 x 2,5 m
Fb8ix9x
SMW AUTOBLOC 3 chaw cuck Ø 210 mm
turning diameter:400 mm
turning length:1250 mm
centre height:200 mm
spindle bore:55 mm
bed width:315 mm
spindle speed::2700 U/min
spindle taper:D1-6 DIN 55029
Ws30c
diameter of quill:73 mm
quill stroke:140 mm
Swing 762mm,
Swing over cross slide 368mm,
maximum cutting dia. 406mm,
813mm max cutting length,
10” chuck,
Goyiumcsq
5” subspindle chuck,
3400rpm spindle,
991mm B.C.,
Bar capacity 100mm, ,
coolant, .
turning diameter 400 mm
turning length 1065 mm
control HEIDENHAIN EPL 2
swing diameter max. over bed cover 600 mm
swing diameter over slide rest 420 mm
x-travel 275 mm
z-travel 1065 mm
spindle bore 85 mm
spindle turning speed range 16 - 3200 U/min
max. torque on the spindle 800 Nm
spindle drive 27 kW
500 daN
1000 daN
rapid traverse X-axis 10 m/min
rapid traverse Z-axis 15 m/min
tool turret 12 Pos
number of driven tool stations 6
Baipgoby
tool shaft (cylinder shaft DIN 69880) 40 mm
spindle dr...
GILDEMEISTER CNC Turning Centre
Type:NEF CT60
Control:HEIDENHAIN
Turning diameter:400mm
Turning length:600mm
Chuck diameter:310mm
Spindle speeds:20-4000rpm
Centre height:260mm
Spindle bore:70mm
Dimensions of the machine ca.:4000x2200x2000mm
Books included
Bty09uprgg
Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not fo...
turning diameter 270 mm
turning length 440 mm
control Fanuc 20-T
spindle bore 28 mm
hardening length 0-5000 mm/min
tool taper Multifix A
spindle nose CAMLOCK D1-3
total power requirement 7,5 kW
weight of the machine ca. 1450 t
dimensions of the machine ca. m
6 axis machine with support spindle
C-axis, Y-axis
Vozkjuq
chip conveyor
2 pieces of 3-jaw chucks
2 x tool turrets with 12 tool postion and driven tools
turning diameter 400 mm
Qn3arrjr
turning length 600 mm
control Siemens 820 T
turning diameter over bed slide 375 mm
face slide travel max 375 mm
spindle passage 103 mm
transmission ratio 2
turning speed range 32 - 3150 U/min
feed stepless
feeds X-axis 0,001 - 180 mm/U
feeds Z-axis 0,001 - 300 mm/U
rapid motion - x-axis 6000 mm/min
rapid traverse Z-axis 10000 m/min
turning tool - shaft cross cut max. 25 x 25
tailstock quill adjustment 100 mm
tailstock quill taper MT 4
total power requiremen...
turning diameter:400 mm
Dwge7m
turning length:1250 mm
centre height:200 mm
spindle bore:55 mm
bed width:315 mm
spindle speed::2700 U/min
spindle taper:D1-6 DIN 55029
diameter of quill:73 mm
quill stroke:140 mm
turning diameter max. 446 mm
turning length 850 mm
control Sinumerik 828D Siemens
greates pass round over bed 446 mm
Swing dia. over traverse guideway 240 mm
standard turning dia. 150 mm
Main spindle:
turning speed range - main spindle 10 - 3.000 min/-1
Bqa9a7wvc2
power capacity - main spindel 16 / 7 kW
max. Torque 80 / 33 Nm
spindle taper DIN 55026 / A2-5
spindle bore 52 mm
max. usable bar diameter 40 (52) mm
chucking diameter 150 mm
turret:
number of toolpositions 8 pos.
tool taper VDI 30...
The machine is in good technical condition, by prior arrangement the possibility of testing. The lathe worked only 5560 hours and produced about 225,000 pieces of products. The kit also includes an IMCA bar feeder with a diameter of 32 (36). The lathe is designed for machining complex parts from bar stock up to Ø 32 mm (Ø 36 mm). Easy and quick tool change with a compatible cartridge system. Ergonomic and easy access to the working area of the machine with a large sliding cover. Productivity of ...
- 2 pieces available (price is valid per piece)- system FANUC Series 18-T - 2 axis - swing over bed: 800 mm - maximum turning diameter: 630 mm - standard turning diameter: 345 mm - max turning legth 2000 mm - chuck size: 15-24 inch - spindle nose: ASA A2-11 - spindle RPM: 20-1800 - spindle motor: 37/ 30 kW - spindle hole diameter: 132 mm - bar diameter size: 117 mm - number of tools in revolver: 12 - without chuck (workpiece was between centers, pushed by hydraulic tailstock) - under power, used...
turning diameter 420 mm
turning length 1000 mm
control Philips B 2 T
Power connection 79 kVA
turning speed - milling spindle 22,4-3550 U/min
Working speed 0,1-10.000 m/min
rapid speed 10 m/min
Number of tools 12 St.
spindle bore 78 mm
drive of main spindle 36 kW
max. torque on the working spindle 1600 Nm
total power requirement kW
weight of the machine ca. 9,7 t
dimensions of the machine ca. 6,3x2,2x2,2 m
Cnt3fth8
- tool measuring on board
turning diameter:425 mm
turning length:1000 mm
swing diameter max. over bed cover:600 mm
swing diameter over face slide:425 mm
centre distance:1.300 mm
turning speeds:4.000 1/min
spindle hollow:80 mm
spindle:30 kW
Bmroebcf2t
turret head:12x VDI 40 SAUTER pos.
tailstock adjustment:1200 mm
total power requirement:53 kVA
weight of the machine ca.:8,5 t
dimensions of the machine ca.:5,4 x 2,6 x 2 m
CNC-lathe,
Turret head with 12 driven tools,
C-axis
tailstock,
tooleye,
differential pressure 8-4...
turning diameter:400 mm
turning length:1250 mm
centre height:200 mm
N7eld
spindle bore:55 mm
bed width:315 mm
spindle speed::2700 U/min
spindle taper:D1-6 DIN 55029
diameter of quill:73 mm
quill stroke:140 mm
turning diameter 440 mm
turning length 1500 mm
control C 200
Tool changer 16
3 jaw chuck Forckrath 500 mm
Tgxff0yv
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Circulation diameter above the bed: 400 mm
Btz7ujfr0o
Circulation diameter above the slide: 200 mm
The machine is in good technical condition, by prior arrangement the possibility of testing. CNC lathe with Fanuc 0i-TF control system with TurnMate programming and BS65 / 1.5 m material feed. Involved Jan.2018.Used in small batch production and prototypes. Cutting time 460 hours. Machine connected, possibility to test. Lathe parameters: - Turning length 750 mm, max diameter over the box 400 mm, ma...
- 2 pieces available (price is valid per piece)- system FANUC Series 18-T- 2 axis- swing over bed: 800 mm- maximum turning diameter: 630 mm- standard turning diameter: 345 mm- max turning legth 2000 mm- chuck size: 15-24 inch- spindle nose: ASA A2-11- spindle RPM: 20-1800- spindle motor: 37/ 30 kW- spindle hole diameter: 132 mm- bar diameter size: 117 mm- number of tools in revolver: 12- without chuck (workpiece was between centers, pushed by hydraulic tailstock)- under power, used for shafts- w...
Hauptspindel (40% ED)
Antriebsleistung
35 kW
Drehmoment
120 Nm
Gegenspindel (25% ED)
Antriebsleistung
9 kW
Drehmoment
20 Nm
Drehzahlbereich
Haupt- und Gegenspindel
max. 6000 min-1
Werkzeugträger, angetriebene Plätze (25% ED)
Drehzahl
max. 12000 min-1
Antriebsleistung
9 kW
Drehmoment
10 Nm
Bqgeqcmg
Max. Drehlänge
250 mm
Max. Drehdurchmesser
400 mm
675 mm
420 mm
600 mm
tavel x / z - turret 1 250 / 625 mm
+/- 50 mm
Rapid traverse 24 m/min
rapid traverse Z-axis 30 m/min
control Siemens 828 D SL
bar material dia. max. 65 mm
turning speeds 4.000 U/min
spindle nose A²8
tool turret - number of stations 12
Dimensions (HxWxD) 4.950 x 2.000 x 2.210 mm
weight of the machine ca. 6,5 t
Main spindle: Conversion to air pressure to prevent that coolant come in
spindle bearings (rust protection)
Cfb8yw2x
turning diameter:400 mm
Gjxkxrasq
turning length:1250 mm
centre height:200 mm
spindle bore:55 mm
bed width:315 mm
spindle speed::2700 U/min
spindle taper:D1-6 DIN 55029
diameter of quill:73 mm
quill stroke:140 mm
General Data
Measurements width 5010 mm
Measurements depth 2190 mm
Measurements height 1870 mm
Machine weight 7500 kg
Control Unit
Brand Heidenhain
Model CNC Pilot
CNC main language English
CNC language customizable Yes
Main Drive
Number of spindles 1
Spindle speed range 3600
Movement
X-Axis Movement 220 mm
Z-Axis Movement 1000 mm
Workpiece
Workpiece drm 440 mm
Workpiece Z 1000 mm
Ovh8b
Tools
Slots in storage 12
Type of tool holder VDI40
Media
Main electronic connection 400 V
Additional ...
The machine is in good technical condition, after prior consultation the possibility of testing.
Gio7l9a83
COLCHESTER - TORNADO A90 - 1999- control system: Fanuc GE Series 21i-T - max swing: 410 mm - max turned diameter: 360 mm - X axis: 200 mm - Z axis: 450 mm - max spindle rotations: 4000 RPM - spindle centre height: 900 mm - weight: 2568 kg
Bmwkmsded8
7
with counter spindle
Collet chuck up to 30mm
All collets available
Btjngoj97k
16 compartment tool turret
VDI16
Driven tools
Siemens control
14438 hours
Manufacturer Spinner
Type designation PD 400
year of manufacture 2000
Machine number approx. 2500 kg
Condition: used
item number: 000018889
Information: approx. 2500 kg
Shipping costs: shipping / transport must be organized by the buyer !
550 mm
Beoj3yvppq
330 mm
625 mm
200 / 625 mm
+/- 40 mm
24 mm
35 mm
control Siemens 828 D SL
bar material dia. max. 52 mm
turning speeds 5.000 U/min
spindle nose A²6
tool turret - number of stations 12
tool taper BMT 45
toolpiece turning speed range 4.500 U/min
Opposed spindle turning speed 5.000 U/min
Dimensions (HxWxD) 3.220 x 1.735 x 1.960 mm
weight of the machine ca. 5,0 t
Main spindle: Conversion to air pressure to prevent that coolant come in
spindle bearings (rust protection)
Controller: FANUC 21i-T
Axis
X-axis travel mm: 300
Z-axis travel mm: 1.525
Max turning diameter mm: 430
Btjcswnsjw
Max turning length mm: 1.500
Maximum Diameter Over Bed mm: 505
Maximum Diameter Carriage mm: 720
Distance between centers mm: 1,800
Rapid traverse X,Z mm/min: 20.000
Main spindel
Chuck ø: HIDRAM KTP 550/205
Spindle speed rpm: 20 - 2,500
Spindle Nose: A2-11
Spindle hole mm: 205
Speed Ranges: 2
Spindle drive power kW: 37/45
Upper Turret
Tool places number: 12
Tool height mm: 32
I...
The CNC lathe OKUMA LB 15 was manufactured in 1989 in Japan. The lathe has 12 tools in the magazine and the spindle speed reaches 3800 revolutions per minute.
Technical parameters of the CNC lathe:
- control: OSP 5000L-G CNC System (German)
- data transmission: RS232
- tool revolver: 12-position, BOLT ON type
- lathe chuck: 250 mm
- spindle: 70-3800 rpm. (11 kW, 30 min; 7.5 kW - continuous operation)
- spindle bore diameter: fi 75 mm
Becwlahc
- X axis travel: 400 x 0.001 mm
- Z axis travel: 500...
The machine is in good technical condition, by prior arrangement the possibility of testing. 2 machines for sale - the price offered is for 1 pcs.
Btxuv22nrv
6
3.000 €
Bidding plus VAT
20 days left
20 days left
with CNC control, make: Siemens, type: Sinumerik, max. turning diameter: 400 mm, max. turning length: 1000 mm, tool turret: 12-fold, tool holder: VDI40
Bnyu7esc
ROMI - C 680 - 2014- system Siemens Sinumerik 802D, hand wheel- CE marking- center height 352 mm- swing over bed 680 mm- swing over saddle 430 mm- center distance 3000 mm- X/Z=360/3025 mm- spindle bore 104 mm- spindle RPMs 1-1800- rapid moves 8 m/ min- tailstock taper MK5- cooling tank 350 l- main motor 30 kW- power request 40 kVA- machines weight 7000 kg
Bjopoo208a
X mm
370 mm
325 oder 625 mm
200 / 325 oder 625 mm
Rapid traverse 24 m/min
rapid traverse Z-axis 35 m/min
+/- 50 mm
control Siemens 828 D SL
bar material dia. max. 65 mm
turning speeds 5.000 U/min
Beoj7lx0xs
spindle nose A²6
tool turret - number of stations 12
tool taper BMT 45
toolpiece turning speed range 4.500 U/min
Dimensions (HxWxD) 2.910 x 1.735 x 1.960 mm
weight of the machine ca. 4,6 t
Main spindle: Conversion to air pressure to prevent that coolant come in
spindle bearings (r...
turning diameter 400 mm
turning length 630 mm
control Siemens
type 840 c
turning diameter over slide rest 315 mm
swing diameter 520 mm
x-travel 300 mm
Bozt0devvu
y-travel 840 mm
workpiece weight 400 kg
Tool changer 12 Sautner
live tooling
spindle passage 85 mm
chuck: Forkhart 250 mm
total power requirement kW
weight of the machine ca. 6,6 t
dimensions of the machine ca. 4x2,15x2,25 m
turning diameter 660 mm
turning length 1500 mm
control FAGOR
centre height 330 mm
spindle passage 82 mm
number of spindle speeds 30-2000 U/min
bed width 390 mm
rapid speed X/Z 4 - 8 m/min
tailstock quill diameter 75 mm
Main spindle capacity 15 kW
weight of the machine ca. 3,2 t
dimensions of the machine ca. 3,8 x 1,8 x 2,15 m
Control
Eu9kbtu3o
- FANUC Series 18i TB Control, Manual Guide i Function
- Central control panel for machine and CNC control on the pedal arm 45 ° swiveling
- 12-fol...
Gildemeister NEF CT40 cnc lathe
Make GILDEMEISTER
Type NEF CT40
Year 1987
Control CNC
Technical details
Turning diameter 400 mm
Turning length 600 mm
Circumference diameter over bed slide 225 mm
J9aywj
Top height 260 mm
Spindle head 140h5 flat flange
Spindle bore 68 mm
Lining max. 200 mm
Torque 75 0
Spindle speeds - stepless 20-4,000 rpm
Tailstock yes / yes MK4
Quill stroke 100 mm
Turret (x-fold) 12
Total power requirement 22 kW
Machine weight approx. 3200 t
For more detail...
Was a demonstration machine (rarely used)
Sinumerik 828D CNC control with ShopTurn
main-spindle: 3-jaw chuck
sub spindle: 3-jaw chuck
Btaozk0iij
C-axis
Y-axis
driven tools
12 fold turret
chip conveyor
coolant device
Technische Daten / technical details:
max. Umlaufdurchmesser über Bett / max. rotary diameter over bed 590 mm
max. Umlaufdurchmesser über Schlitten / max. rotary diameter over sledge 500 mm
max. Drehdurchmesser /max. turning diameter 430 mm
max. Drehlänge / max. turning lenght 770 m...
CNC Lathe Gildemeister
Mod: NEF CT 40
year: 1985
centre height - 260 mm, max. turning length - 600 mm
Nefpruv2
max. rotation over bed - 400 mm
spindle bore - 68 mm
main drive - 22 kW
12-fold turret SAUTER
speeds are infinitely variable from 20 - 4000 rpm
power chuck - 175 mm
space requirement - 4,2 x 3,2 x 1,65 m
weight - 3200 kg
with pictured accessories.
from school.
The machine can be inspected and demonstrated under power
and demons...
550 mm
330 mm
325 oder 625 mm
200 / 325 oder 625 mm
+/- 40 mm
24 mm
35 mm
control Siemens 828 D SL
bar material dia. max. 52 mm
turning speeds 5.000 U/min
spindle nose A²6
tool turret - number of stations 12
tool taper BMT 45
Beoj7cgvdr
toolpiece turning speed range 4.500 U/min
Dimensions (HxWxD) 2.910 x 1.735 x 1.960 mm
weight of the machine ca. 4,8 t
Main spindle: Conversion to air pressure to prevent that coolant come in
spindle bearings (rust protection)
Immediately available from site :
CNC Lathe EMCO
Type MaxxTurn 45
Year of manufacture 2007
Bar feeder Emco Top Load 8 - 45
Year of manufacture 2007
Turning diameter over bed 430 mm
Turning diameter over slide 300 mm
Dx0jvm
Turning length 480 mm
Sinumerik 840 D Shop Turn
Swing diameter max 380 mm
CNC control Sinumerik 840 D Shop Turn
spindle bore 45 mm
Revolver 12 fold
spindle speed up to 5300 rpm
Drive 13 kw
Tailstock
Weight 4 to
Max cutting diameter 420mm,
Bsywqujo9h
750mm swing,
max cutting length 1524mm,
102mm bar capacity,
3300rpm spindle,
4000rpm milling,
Y axis +/- 75mm,
12 station turret,
30kW motor power,
3 jaw chuck,
Mazatrol 640T Nexus control,
0.001 degree C axis,
tool setter, tailstock, swarf conveyor, tooling, , low volt light
turning length 2010 mm
control Siemens 840D
turning diameter over slide rest 320 mm
spindle passage 100 mm
Tool changer
turning speeds 10-2800 U/min
transmission ratio 4
Bkpmebb2cg
chip conveyor
steady 240 mm
tail stock
3-jaw-chuck diameter 400 mm
main gear-box motor 55 kW
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
CNC lathe with tailstock
Monforts RNC 4
year of manufacture 1999
Control: Siemens 840C
turning diameter Ø: 420 mm
Insomyur
turning length: 600 mm
spindle bore: 65 mm
3- Jaw chuck
spindle speeds: 28 - 4000 rpm
Number of tool holders: 12
rapid traverse X-axis: 12 m / min
rapid traverse Z-axis: 24 m / min
Data without guarantee
Haas, ST-30
Maximum Part Swing: 806mm
Bar Capacity, Maximum speed: 76mm, 3400rpm
Maximum Power Rating, Drive System: 22.4kW, Belt-Drive
Spindle Nose, Chuck Size: A2-6, 254mm
Maximum Cutting Length: 660mm
Axis Travels (X, Z): 324mm, 660mm
12-Station VDI Tool Turret
Haas Controller
Rigid Tapping Option
Automatic Tool Presetter
Belt-Type Chip Conveyor
Parts Catcher
Programmable Hydraulic Tailstock
Manufactured in 2010
Machine in very good condition.
Btggo8ptyt
650 mm
420 mm
600 mm
250 / 625 mm
+/- 50 mm
24 mm
30 mm
control Siemens 828 D SL
bar material dia. max. 65 mm
turning speeds 4.000 U/min
spindle nose A²6
tool turret - number of stations 12
tool taper BMT 65
toolpiece turning speed range 4.000 U/min
Opposed spindle turning speed 5.000 U/min
Dwim9u
Dimensions (HxWxD) 5.050 x 2.050 x 2.205 mm
weight of the machine ca. 6,7 t
Main spindle: Conversion to air pressure to prevent that coolant come in
spindle bearings (rust protection)
Doosan CNC Lathe
Model : 310 S
Btexxfsg9y
Year : 2000
Control : Fanuc 21 T
Spindel Speed : 4500 RPM Max .
Max. Turning Length : 450 mm
Working length 1250 mm
Working diameter 400 mm
Spindle boring 54 mm
Number of tools on head 4
Spindle revolutions 2500 ot / min
Spindle motor output 12 kW
Machine dimensions 3200 mm x 1800 mm x 1500 mm
Cftllyb
Machine weight 3500 kg
HAAS TL 1 Teaching Lathe
Bsxpgvwlxk
year 2009
Haas control
Spindle nose ASA 6
Manual chuck diam. 200
Automatic turret with 4 positions
Manual tailstock
Volteggio on the bench mm. 500
Turning circle on the carriage mm. 280
Turning diameter mm. 400
Turning length mm. 750
Bar passage mm. 76
Spindle motor power KW 9
Make GILDEMEISTER, type CTX 400,
Year of manufacture 1991
Technical data:
Jwnumy
control EPL 2
centre height 260 mm
turning length 600 mm
Swing over slide 260 mm
Swing over bed 400 mm
tailstock
Chip conveyor
Currently still under power, in stock soon
2-axis CNC lathes
workpiece length 380 mm
turning diameter over bed 400 mm
spindle bore 46 mm
linear tool changers are particularly suitable for series machining of smaller workpieces - shortest tool change times and absolutely reliable function guarantee increased productivity
Bhpqetxsty
the machine frame in inclined bed design guarantees high rigidity and good chip removal
hardened linear guides of the X- and Z-axis guarantee precision and reliability
Closed work area offers protection and cle...
650 mm
420 mm
600 mm
250 / 625 mm
+/- 50 mm
24 mm
30 mm
control Siemens 828 D SL
bar material dia. max. 65 mm
turning speeds 4.000 U/min
spindle nose A²8
tool turret - number of stations 12
tool taper BMT 65
toolpiece turning speed range 4.000 U/min
Dimensions (HxWxD) 4.770 x 2.050 x 2.205 mm
weight of the machine ca. 6,5 t
D2gp3tv
Main spindle: Conversion to air pressure to prevent that coolant come in
spindle bearings (rust protection)
Lathe Colchester Combi 2000
Year of manufacture: 2001
Description:
The machine is in very good condition, all maintenance has been done.
2 years ago the ball screws of the Z- and X-axis were overhauled. Machine is first hand and was only operated in single shift operation.
Accessories:
3 jaw chucks and parat tool holder.
Instruction manual
Technical data:
Eajbuwgii
Turning diameter: 400 mm
turning length: 1181 mm
Control: Fanuc Series 210i-T
turning diameter over bed slide: 246 mm
turning diamet...
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
10 valuable tricks for buying used machines online
Sample sales contract for used machines in nine languages
Photo gallery: The World's 10 biggest excavators
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
