CNC lathe INDEX G300 04-02-094
Delivery time: immediately
Number: 04-02-094
Machine data
Year of construction: approx. 1997
L x W x H: approx. 4000 x 2500 x 2400 mm
Weight: approx. 6550 kg
Good general condition
Technical specifications
Control: Siemens C 200-4
Dimensions:
Max. Turning diameter over bed: approx. Ø 590 mm
Max. Turning length: approx. 710 mm
Bar passage: approx. Ø 65 mm
Spindle:
Speed range: about 5000 rpm
Drive power: approx. 43 kW
equipment
- Chip conveyo...
VICTOR CNC Turning Centre
Type:VTurn-36
Year:1996
Control:FANUC O-TC
X travel:30+275mm
Z travel:1255mm
Swing over bed:650mm
Between centres:1290mm
Toolchanger:10atc
Hole through spindle:105mm
Max.turning diameter:550mm
Spindle speed:9-2500rpm
With swarf conveyor
Machine size-LWH:5210x1985x2205kg
Machine weight:9800kg
Videos available
Cmegzk38
Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in g...
With Protrak SLX Control. 1800 rpm
Blfgw88k
turning diameter max. 450 mm
turning length max. 2.000 mm
control Philips CNC
swing diameter max. over bed cover 550 mm
Main spindle:
turning speed range - main spindle 16 - 2.500 min/-1
transmission ratio 3
power capacity - main spindel 43 kW
Bfgmx2oh8b
max. Torque 2.240 Nm
spindle nose 8
chucking diameter 250 - max. 400 mm
spindle diameter in front bearing 120 mm
spindle bore 78 mm
usable bar diameter ( - ) mm
axis stroke:
x-travel 435 mm
z-travel 2.176 mm
Tailstock:
diameter of quill...
NEW CNC lathe with two spindles, Y-axis and short bar loader.
The machine is new, still in original packaging, the picture is a symbol picture.
Manufacturer: Haas
Type: DS-30Y
Year of manufacture: 2019
Technical Details:
X-axis: 584mm
Swing diameter: 806mm
Y-axis: ±50,8 mm.
Main spindle: vector drive (22.4 kW),
4000 min-1,
A2-6 spindle,
3-inch chuck (210 mm).
Secondary spindle:
Vector drive (14.9 kW), 4000 min-1,
A2-5 spindle, 8.3 inch chuck (210mm).
Turret with 12
tool stations,
driven tools wi...
Neat used lathe from Fabryka Automatów Tokarskich (FAT)
Type: TUR 560 MN
Year of construction: 2015
Siemens CNC
Turning diameter above bed ø 560mm
Turning diameter above the carriage ø 300mm
Distance between centers 2000mm
Speed 2 - 2500 rpm
Main engine power 18.5 kW
Bt80xk9ezs
turning diameter over bed: 530 mm
turning diameter over support: 315 mm
turning length: 1625 mm
control: Fagor800 TG
centre height: 260 mm
turning speed range:: 0-240 / 240-630 / 630-1700 U/min
spindle bore of work spindle: 80 mm
feed:: 0 - 3000 mm/min
rapid traverse: 5000 mm/min
tailstock taper MT: MK5
tailstock quill stroke: 180 mm
total power requirement: 9,5 kW
weight of the machine ca.: 1870 kg
dimensions L x W x H: 2,8 x 1,7 x 1,8 m
Machine has been refurbished following work has been proc...
turning diameter 560 mm
turning length 1000 mm
control EPL 1
spindle turning speed range 10 - 2240 U/min
spindle motor 15 kW
turning diameter over bed slide 250
bed width 360 mm
cross movement 310 mm
spindle bore 65 mm
rapid traverse feeds 6000 mm/min
total power requirement 22 kW
Beomtp2uut
weight of the machine ca. 3 t
dimensions of the machine ca. 4,5 x 2,5 x 1,8 m
- power chuck 315 mm
- steady rest
- PARAT tool carrier with various inserts
- coolant device
- misc. accessories
Mazatrol T Plus Control. 40 Station tool changerSerial No. 119272
Control Mazatrol T- Plus
Turning length 1000mm
Turning diameter 575mm
Spindle through hole 88mm
Distance between centres 1018mm
Spindle centre height above bed 310mm
Swing over cross slide 470mm
Spindle speeds 35 - 3000 rpm Variable
A T C 40 Station
Max, Tool Length 300mm
Max, Tool Diameter 90mm or Adjacent pocket empty 120mm
Max, Tool Weight 10kg
Tail stock 5 morse taper
Tailstock travel 900mm
Z axis travel 1065mm
X axis travel ...
Technical specifications:
Control Unit: Fanuc
X-Axis travel: 560 mm
Y-Axis travel: 135 mm
Tools turret: 12
Fe2xfnxqm
Spindle speed: 6000 Rpm
Turning diameter: 160 mm
Dimensions:
Length: 3300 mm
Width: 2700 mm
Height: 1600 mm
Weight: 3200 Kg
More info:
Includes chuk tool and 1 feed bar + chip conveyor.
Notes:
Availability immediately
Max. turning Ø: 570mm
X-Axis: 282mm
Z-Axis: 1.330mm
Spindle bore: 77mm
Speedrange: 3500Rpm
Spindle power: 15kW
ATC / revolver: 12
Speed live tools:4000Rpm
Chip conveyor: Yes
Tool eye: Yes
Pinole taper: 5Mk
Stroke pinole: 100mm
2s0epq
Quill Ø: 100mm
Length: 4.000 mm
Width: 2.000 mm
Height: 2.100 mm
Weight: 6.700 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers whe...
turning diameter max. 290 mm
control Eltron Pilot
Btroy3bnrt
turning diameter over bed 600 mm
main spindle:
turning speed range - main spindle 25 - 5000 min/-1
drive capacity - main spindle 30 kW
max. torque 360 Nm
spindle bore 79 mm
max. rod diameter 65 mm
spindle head 170
chucking diameter 250 mm
tool turret:
number of tool places 12 Pos.
travel:
x-axis 190 mm
z-axis 450 mm
feeds:
rapid traverse 15 x 15 m/min
tip feed speed 5000 mm/min
weight of the machine ca. 5,3 t
dimensions of th...
turning diameter 500 mm
turning length 600 mm
control EPL2
spindle diameter in front bearing 100 mm
B9tr7jn
spindle bore 72 mm
longitudinal stroke 640 mm
face stroke 212 mm
quill taper MK 4
feed 5 m/min
rapid traverse 10 m/min
speed spindle max. 5000 U/min.
tool taper - diameter 30 mm
total power requirement 30 kW
weight of the machine ca. 4,6 t
dimensions of the machine ca. 7,2 x 5,0 x 1,8 m
Eltropilot ELP2, steady, chip conveyor.
Without chuck.
Machine can be inspected under power.
turning diameter 570 mm
turning length 2000 mm
control 805
bore 66 mm
swing diameter max. over bed cover 340 mm
turning speeds 1 - 2500 U/min
centre height 280 mm
dimensions of the machine ca. 3,8 x 1,7 x 1,8 m
Jacdludc0
total power requirement 15 kW
weight of the machine ca. 3,5 t
Maschinen-Details
Lagernummer 1105-03234
Maschinenart CNC Drehmaschine
Fabrikat GILDEMEISTER
Typ CT 60
O9b3t
Baujahr 1990
Steuerungsart CNC
Lagerort FRANKREICH
Ursprungsland Deutschland
Lieferzeit Sofort
Frachtbasis EX WORK
Technische Details
Drehdurchmesser 650 mm
Drehlänge 2000 mm
Steuerung EPL 2
Umlaufdurchmesser max. über Bettabdeckung 650 mm
Umlaufdurchmesser max. über Planschieber 360 mm
Planweg 320 mm
Spindeldurchmesser im vord. Lager 140 mm
Spindelbohrung 107 mm
Drehzahlbereich 4 - 3060...
Machine include tools accessoriess Digital read out
Toolholders
Linetes
Turning lenght 2000 mm
FREE LOADED ON TRUCK
We can organize transport as well.
Iwg30h7
CNC-automatic lathe
brand: INDEX
type: ABC52
new in: 1997
O9orj
equipped with: INDEX C200 control
2 turret
driven tools
subspindle
back working
chip conveyor
automatic bar loader INDEX LM
Catalog No. : 5316
Type: MD3
Producer: Gildemeister
Bqsb3byo
Made in: 1985
Characteristic:
Control system: Eltropilot
Maximum-turning length: 600 mm
Max. turning diameter: 400 mm
Turning diameter over bed (max): 560 mm
Spindle bore: 73 mm
Equipment:
SMW autoblock D 250 hydraulic chuck
Ref. -No.: 10217
Brand: BOEHRINGER
Bt7onleum3
Type of control: Konventionell
Control: N/a
Country of origin: Deutschland
Swing diameter over bed: 570 mm
Swing diameter via support: 365 mm
Turning Length: 2.000 mm
Centre Height: 280 mm
Spindle passage: 70 mm
Travel -X Axis: 570 mm
Travel -Z Axis: 2.000 mm
Max. Workpiece Weight: 1.600 kg
main engine: 19 kW
Crane capacity: 20.000 kg
CNC contouring control: HEIDENHAIN 1190 TURN PLUS
Chuck lathe, without spindle bore.
Circulation over bed guide: 600 mm.
Circulation over face guide: 420 mm.
Plan travel: 275 mm.
Longitudinal travel: 1065 mm.
Spindle speed: 16 - 3200 rpm.
12-fold VDI 40 tool turret.
Hydr. 3 jaw chuck 250 mm with various jaw sets.
Hydr. tailstock MK 5, hydr. lynette,
vapour extraction system, coolant system,
Susodk
chip conveyor and documentation.
Weight: approx. 8000 kg. Dimension approx. 5,5 x 2,3 x 1,9 m.
The ...
turning diameter 520 mm
turning length 1625 mm
control FAGOR 800 TG
Bypkugfq
greates pass round over bed 530 mm
swing diameter over slide rest 475 mm
centre height 260 mm
bed width 350 mm
main spindle bore 68 mm
turning speeds 1500 U/min
rapid traverse 5 m/min
Drive 10 kW
total power requirement kW
weight of the machine ca. 1,87 t
dimensions of the machine ca. 2,8x1,4x1,8 m
turning diameter 600 mm
turning length 500 mm
control SIEMENS 810D
spindle diameter in front bearing 160 mm
turning speed range - spindle 25 - 1450 U/min
spindle motor 37 kW
number of tapers in turret head 16
rapid power traverse in X-and Z direction 10 m/min
powered chuck diameter 315 mm
spindle bore 100 mm
tool holder -shaft diameter 50 mm
total power requirement 60 kVA
weight of the machine ca. 6,8 t
dimensions of the machine ca. 4,7 x 2,5 x 2,7 m
Machine retrofit in 1999 with SIEMENS 81...
Circulation diameter above the bed: 250 mm
Dx2wjq
Max. turning length: 550 mm
Driven tools: yes
C axis: yesControl system: Fanuc
The machine is in good technical condition, after previous agreement the possibility of testing. Fanuc 18iTB control system Technical parameters: Main spindle passage for bar material max 65 mm turning diameter 250 mm max turning length 550 mm Y axis + - 41 mm Main spindle type (A2-6) / Counter spindle type 4500 rpm (A2-5) / Upper and lower turret with 4500 rpm Tools w...
Catalog No. : 4693
Type: SP 180 SY
Producer: MAS
Made in: 2017
Characteristic:
Control system: SIEMENS 840D
Total hours: 1024 h
Spindle Hours: 271 h
Maximum turning length: 300 mm
Turning diameter over bed (max): 530 mm
Turning diameter over cross slide (max): 180 mm
X1/Z1: 165/480 mm
Y1: 45 mm
Number of spindles: 2 pcs
Maximum power of the main spindle: 17.5 kW
Diameter of the spindle bore: 43 mm
Maximum spindle speed: 6000 1/min
Counterspindle speed: 6000 1/min
Number of tool tur...
Manufacturer: Hitachi Seiki
Model: CH250 – Super HiCell 250
Controller: SEICOS Sigma 16T
Tool holder: QCV 40
X travel: 600 mm
Y8jhltkt
Y travel: 150mm (+ -75mm)
Z travel: 1000 mm (730 mm)
ZB travel: 860 mm
Maximum Swing / Turning Diameter: Ø500 mm
Maximum Turning length: 720 mm
Spindle nose: JIS A2/8”
Main spindle speed: 30-4.000 rpm
Spindle boring: Ø78/Ø130
Main spindle power: 18.5/15 kW
Rapid Traverse X, Y, Z: 30/15/30
Main spindle: 10” chuck
Sub spindle: 8” chuck
Equipment / Acc...
turning diameter 500 mm
turning length 2250 mm
2sjgwa
control Pfillips 432 T
swing diameter 600 mm
chuck 400 mm
steady 500 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
CNC lathe Doosan Puma 3100 LY
Year 2011
Wvr0u9c
Fanuccontrol
Y axis, driven tooling, hydraulic steady! Full options
turning diameter 500 mm
turning length 4000 mm
control Fanuc
greates pass round over bed 635 mm
swing diameter over face slide 390 mm
main spindle:
turning speed range - main spindle 15 - 1500 min/-1
drive capacity - main spindle 18,5 kW
spindle bore 118 mm
spindle head D1-11 Camlock
Dmuv9j3
In our assessment, the machine is in a very good condition
Status.
The machine can be viewed under power by appointment.
Technical features:
- Swivel turret from Sauter
- manual tailstock
- fixed an...
Max. swing: 780 mm
Max. turning length: 800 / 1600 / 2240 mm
Max. turning diameter: 550 mm
Max. bar work capacity: 115 mm
Fsfb0uaxs
Spindle speed: 2500(2000) rpm
Chuck size: 12 (15)"
() : Option
Two-stage gear by default
Optional available with c-axis and driven tool
Available in the following variations: LA-350_L8, LA-350_L16, LA-350_L22
CNC lathe MDM AERO TURN RT-280P was built in 2016 by the Taiwanese company MDM Max Drill. The machine was hardly used, it only worked sporadically for one year.
Technical parameters :
- CNC control: FANUC 0i-TF
- maximum turning length: 500 mm
- passage over the bed: 470 mm
- maximum turning diameter over the slide: 300 mm
- spindle passage: 65 mm
- maximum diameter of the processed bar: 52 mm
- hydraulic chuck: 250 mm
- maximum speed: 3500 rpm.
- carriage travel in the X axis: 145 mm
- carriag...
turning diameter 500 mm
turning length 640 mm
control
Hmootrz
weight of the machine ca. 5,2 t
dimensions of the machine ca. 4527 x 1940 x 1730 m
turning diameter 580 mm
turning length 1600 mm
control Siemens 810 T
turning diameter over slide rest 320 mm
spindle passage 85 mm
Tool changer
turning speeds 12,5-4000 U/min
transmission ratio 4
chip conveyor
3 jaw chuck Forckrath 315 mm
steady 170 mm
tail stock
total power requirement 53 kW
weight of the machine ca. t
dimensions of the machine ca. m
Bkpmdeokgd
turning diameter over bed 500 mm
tavel x / z - turret 1 200 / 500 mm
rapid traverse x + z axis 24 m/min
turning length 500 mm
control Siemens 828 D Basic T
bar material dia. max. 52 mm
turning speeds 50 - 4.000 U/min
Cfcij3py
spindle bore 70 mm
spindle nose A²6
tool turret - number of stations 8
Dimensions (HxWxD) 2.690 x 1.635 x 1.580 mm
weight of the machine ca. 3,9 t
Main spindle: Conversion to air pressure to prevent that coolant come in
spindle bearings (rust protection)
MONFORTS - RNC 5 - 1992- FANUC Series 15-T- with robot arm- chip conveyor- X=270 mm- Z=1020 mm- power request 32 kW- weight 8500 kg
Byaoi87o
The machine is in good technical condition, after prior consultation the possibility of testing.
2szdsm
With Siemens 810D CNC Control. Manufactured 2008Distance between centres 2000mm
Swing over bed 630mm
Be9ujzqmhz
Swing over cross slide 370mm
Spindle speeds 2-2500 rpm
Spindle bore 105mm
Feed rate 8m/min
3 jaw chuck 350mm
4 jaw chuck 1 x 500mm, 1 x 400mm
Tool post Sauter CNC 4 way
Fitted with Fixed Steady 10 - 180mm
Equipment Swarf Conveyor, various jaws and tooling
Length 4000mm
Width 2300mm
Height 1760mm
Nett weight approx. 4500 kgs
turning diameter:600 mm
turning length:850 mm
control:840
turning diameter over slide:290 mm
turning speed range - stepless:30 - 3000 U/min
spindle bore:103 mm
rapid traverse:25 m/min
cross movement:220 / 200 mm
total power requirement:65 kW
weight of the machine ca.:11 t
dimensions of the machine ca.:6 x 3 x 2,5 m
Bhizyw8x3o
with CNC SIEMENS 840 D
C-axis driven tools
3 jaw power chuck SMW HFKND 260/3 A8
4-axis 2 saddles
upper support with driven tools 20 - 4000 U/min. 5kW
NC controlled tai...
turning diameter 500 mm
turning length 1500 mm
control Mazatrol
Ck0yqhrd
type T32-2
tail stock
Tool changer 24 Pos.
3-jaw chuck Kitagawa
3-jaw-chuck diameter 300 mm
chip conveyor
total power requirement kW
weight of the machine ca. 5,7 t
dimensions of the machine ca. m
turning diameter:510 mm
turning length:2500 mm
control:Siemens 810 T
tool piece magazine with:12 Plätzen
power capacity:40 kW
weight of the machine ca.:12 t
dimensions of the machine ca.:6,0 x 2,2 x 2,2 m
C0dfcdw0
Machine completely overhauled / uprated to Siemens 810T control in 2000, with 3-jaw chuck
Ø 400 mm, full housing, chip conveyor, separate control panel, electronic hand wheel, coolant device, emergency cut-off, various further chucks and accessories
Maschinen-Details
Lagernummer 1105-03219
Maschinenart CNC Drehmaschine - Schrägbettmaschine
Fabrikat VICTOR
Typ VTurn 36
Baujahr 1997
Steuerungsart CNC
Lagerort FRANKREICH
Ursprungsland TAIWAN
Lieferzeit nach Vereinbarung
Frachtbasis ab Standort
Technische Details
Drehdurchmesser 475 mm
Drehlänge 1250 mm
Steuerung O TB
Umlaufdurchmesser über Bett 650 mm
max. Drehdurchmesser 475 mm
Btb83ba9fu
Standard Drehdurchmesser 320 mm
Verfahrweg - x 300 mm
Verfahrweg - z 1200 mm
Drehzahl 25-2500 U/min
Spind...
Technical details:
Control: Fanuc 0-T
Max. swing: 650 mm
Max. turning diameter: 550 mm
Max. spindle bore for bar work: 91 mm
Max. turning length: 1290 mm
Movement X-axis: 350 mm
Movement Z-axis: 1255 mm
Spindle speed: 9-2500 1/min
Spilnose: A2-11
Spindle motor 26/22 kW
D03svxql
Number of tools on turret: 10
Tool type: VDI 50
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overvi...
turning diameter:554 mm
turning length:2000 mm
centre height:277 mm
spindle bore:104 mm
bed width:400 mm
spindle speed::2000 U/min
spindle taper:D1-11 DIN 55029
diameter of quill:95 mm
quill stroke:145 mm
Fwzrng7
turning diameter 500 mm
Jwop8a
turning length 1000 mm
control HEIDENHAIN Manual Plus
total power requirement 12 kW
weight of the machine ca. 3000 kg
dimensions of the machine ca. m
Lathe is in good condition and can be seen in use
Siemens sinumerik 840C
Max turning diameter 500
X-axis 360mm, Z-axis 2210mm
Steady rest
Exfch0poq
Brand new chip conveyor
Workpiece weight 800kg
turning diameter:570 mm
turning length:1500 mm
control:FAGOR 8055
turning diameter over bed slide:490
max. swing over slide:360 mm
bed width:350 mm
spindle taper:A2-8
spindle speeds:0-2500 1/min.
spindle bore:80 mm
tailstock quill diameter:95 mm
Nksuv
tailstock quill stroke:220 mm
taper of tailstock quill:5 MK
max. length of work piece:1500 mm
chuck size:250 mm
rapid traverse x/z:15/12 m/min
power requirement:11 kW
weight of the machine ca.:2,5 t
dimensions of the machine ca.:2825x1350x1810 m...
year of construction 2015
Center distance 1500 mm
centre distance 270 mm
Bed width 350 mm
Spindle nose D1-8
turning diameter over bed 540 mm
Turning diameter over slide 360 mm
Rapid traverse
Spindle passage 85 mm
Bgoxyn9ub9
max.speed 1545
Engine power 10 HP
Accessories:
Digital display
Div. tool holder
Schunk wedge bar chuck 315 mm
Quick change tool holder
Coolant system
New price 33.800,- EUR plus VAT
Very good condition.
Max. turning Ø: 400mm
X-Axis: 267,5 mm
Z-Axis: 500mm
Spindle bore: 91mm
Spindle power: 17,5 kW
ATC / revolver: 12
Chip conveyor: yes
Pinole taper: 4Mk
Length: 3.500 mm
Width: 2.400 mm
Height: 2.300 mm
Weight: 5.000 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form ...
turning diameter 290 mm
turning length 450 mm
Bkplxqqoy3
control CNC
spindle passage 65 mm
turning diameter over slide 185 mm
turning speeds 3000 U/min
Tool changer 12
work piece power VDI 40
live tooling
chip conveyor kW
coolant
swing diameter 600 mm
total power requirement 45 kW
weight of the machine ca. 4,7 t
dimensions of the machine ca. 4,5x2,5x2,3 m
Control: Siemens 840C
Driven tools
R29imkoh
C-axis
Spinel torque: 2127 Nm
Spindle speed: 25 - 4000 rpm
turret:
2 pieces
12 tool holders
6 driven
Swing 806mm,
Swing over cross slide 527mm,
maximum cutting diameter 533mm,
762mm between centres,
660mm maximum cutting length,
76mm Bar capacity,
254mm 3 jaw chuck,
22.4kW Spindle Motor,
3400rpm spindle,
Bsqwkao3lr
24m/minute rapid feedrates,
12 Station turret, tailstock, coolant
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
10 valuable tricks for buying used machines online
How to receive 100% of our e-mails
Sell now on Machineseeker! Over 220,000 inquiries per month
Photo gallery: the 10 strongest forklift trucks in the world
Sample sales contract for used machines in nine languages
