Turret lathes - automatic for sale
Your location was not identified (Edit)
|
5
spindle passage: 29 mm Number of tools: 6 St. turning length: 45 mm Yqaay8 tool turret - number of stations: 8 turning diameter: 32 mm drill depth: max: 70 mm range of rpm - spindle: Drehen: 48 - 1500 U/min threading: Drehzahl: 24 - 750 U/min total power requirement: 5,5 kW weight of the machine ca.: 2,2 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Cam-Controlled Automatic Lathe - 2 x rotary slide - 2 x cutting-off carriage Machine is not connected. On sale as is. Component par... more
|
|
2
Main and counter spindle 2 revolvers Tool places: 20 X-axis slide S 1 and S 2 Z axis slide S 1 and S 2 Y axis slide S 1 Cas7hmbx Chip conveyor: Knoll with integrated coolant device Bar feeder magazine: Iemca operating tool Operating instructions and wiring diagram more
|
|
9
Kleosin, Poland
16944 km
1989
good (used)
Rewolwerdrehmaschine with tools ingute used zuschtand Rotation length 2000 mm weight of 5000kg Gwxk9syq more
|
|
4
Lüdenscheid, Germany
18008 km
good (used)
- max. bar capacity: Ø 25 mm - 8 stations turret - spindle speed: 14 - 5750 1/min - motor capacity: 4 kW Bfg80kip8w - barfeeder IEMCA AS 325/32 - dimensions LxWxH: machine 1900 x 1020 x 1650 mm barfeeder 4800 x 600 x 1300 mm overall weight: ca. 2.400 kg more
|
|
4
turning diameter over bed: mm spindle passage: 60 mm turning length: 45 mm tool turret - number of stations: 8 S8zdzgnvb Number of tools: 6 St. turning diameter: max. 56 mm drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Cam-Controlled Automatic Lathe - 2 x rotary slide - 2 x cutting-off carriage - cooling system... more
|
|
5
Wiefelstede, Germany
dealership location
17866 km
used
Lathe, lathe, lathe, cutting machine, copying lathe Turning length 180 mm rotating diameter over bed 300 mm spindle bore 50 mm spindle diameter of 280 mm-hydraulisches Chuck -2 x steel holder delivery as is as seen Dimensions 2800/1400/H1800 mm 2pdayq Weight approx. 2200 kg more
|
|
4
Roßtal, Germany
17876 km
1978
good (used)
INDEX automatic lathe ER25 with rod feed LNS Hydrobar and threaded treading device. With lots of accessories. Bfaxwjeo8r more
|
|
|
|
9
Center height 102mm Spindle taper for collets F38 Spindle speeds 130-3900 rpm Misc.accessories Jaaex8vci MARCELS MASCHINEN CH more
|
|
5
They are 2 machines. One is in use, the other requires a repair that amounts to about €4,000. There are 3 driven tools for cross-processing for both machines. The machines are equipped with FMB Minimag, have an integrated high pressure and have only been run with oil. Visit is possible at any time. N9u38uoc more
|
|
3
Cieszyn, Poland
17320 km
1968
ready for operation (used)
Turret lathe type RV-40 by H.CEGIELSKI - POZNAŃ Serial number: 812/17492 Bexl7qnoav Turning length in the handle max: 660 mm Max. Diameter of bar material: 40mm Max. Turning diameter over bed guideways: 350mm Max turning diameter over the side carriage: 180mm Production year: 1968 more
|
|
1
Main and counter spindle 9 axles 2 revolvers 2 x 14-fold tool changer Main and counter spindle Gcxnatf 9 axles 2 revolvers tool monitoring coolant system chip conveyor more
|
|
7
Tetovo, Macedonia
17151 km
1990
good (used)
Model: TW-20 2Revolver je12 tools for complete processing with counterspindle. Bew2fci9in -Late promoter LNS -Manual rod loader FANUC OT-C YEAR 1990 more
|
|
8
Revolver turning machine Fabr. SPRINT Type T.R. 26 Fabr. # 556 Technical data: Peak height 125 mm Peak width Spindle hole 30 mm Bed length 700 mm Bed width 140 mm max. Removal revolver riding stock-tab spindle 400 mm Spindle speeds 140-2830 UpM Exterior length x width x height 1500 x 800 x 1600 mm Zl773wu Weight about 700 kg with -Spanzanges Facility -Revolver stick -Cooling device needed, in good condition more
|
|
6
Bernau, Germany
dealership location
17571 km
1991
used
Single-spindle KURVENGESTEUERTER lathe (4 units available) Y9z2vh0wy Number of spindles: 1 piece Spindle passage: 20 mm Turning length: 350 mm Turning diameter over bed: 240 mm Speed: 23-4457 U/min Spindle bore: 22 mm Material length: 2000 mm Voltage: 3 x 380/50 Hz V Total power: 8 kW Machine weight approx.: approximately 1.5 t Space requirement approx.: L: 1, 84xB: 0, 9xH: 1.8 m more
|
|
3
Name: Turret lathe (bed turret) Type: RB 70 E Year of construction: 1968 Serial number: 526 Manufacturer: Fa gebr Heinemann AG Int. Machine number: #2667 Ps2yje Electrical connection voltage [V]: 380 / 220 Frequency [Hz]: 50 Total power [kW]: approx. 14 Parameters of machining centre height [mm]: 275 Length of spindle nose turret width [mm]: 1,120 Greatest distance of turret and spindle nose [mm]: 965 Maximum swing over bed-Prism [mm]: 610 Maximum turning diameter over longit... more
|
|
4
Main and counter spindle 2 revolvers with 12 stations Bfioy08ydt parts conveyor Coolant/lubricant treatment with belt filter Switch cabinet with cooling unit, type BKW SK150E chip conveyor Bar feeder: Irco Simag 80.1-3000 more
|
|
5
Tip height: 210 mm Top width: 850 mm Maximum travel: 500 mm Turning diameter over bed: 490 mm Spindle bore: 52 mm Kspwx more
|
|
4
Programmatic lathe Fabr. TRAUB type TF 60/140 Masch.# 194 year 1976 Technical data: Max bar passage 60 mm Max spindle 120 mm maximum clamping diameter 130 mm Swing diameter 190 mm 21 spindle speeds 21-2000 RPM. controllable speed 4 right 2 left Toboggan runs 125 mm longitudinal 70 mm cross installed power of 14 kW with Bbjoyxo8lc -Copying device -Strehleinrichtung -hydr. Clamping device -Rod feeder -2 vertical slides -2 horizontal slide -Clamping pliers set -Three jaw Chu... more
|
|
5
Bernau, Germany
dealership location
17571 km
1992
used
Automatic with Stangerlader Y9z8lcnlb Number of spindles 1 Spindle bore 25 mm RPM 550-4200 RPM Total power 2.0 kW Weight approx. 500 kg Dimensions (Lxwxh) approx. approx. 1.0 x 0.6 x 1.5 mm S/N 88035, hydraulic power, Star revolvers, pipe loader length 4000 mm more
|
|
6
Turret lathe of white Year built: 1931 Fully functional, very good original condition. Must not be operated without belt guard. Suitable as exhibit good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Mqn2z Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appoint... more
|
|
3
Control: Siemens Bar passage: 8 mm Tools: 2 driven tools are delivered with Bar loading magazine: Iemca CS 112 / 32 CTH G7rv8tx the machine is still in production and running on oil more
|
|
4
Single spindle turret lathe Fabr. TRAUB type TK 30 Masch.# 159 year 1979 Technical data: Bbjozbad9d Clamping Collet diameter DIN 6343 up to 30 mm 11 spindle speeds 400-4000 RPM. Cross heads way front/rear 43 / 43 mm Power 4.5 / 6.3 kW Weight approx. 1800 kg External dimensions approx. 1800 x 900 x 1600 mm with -Cross support -Kpiereinrichtung -Star revolver used, in good condition more
|
|
3
Hamlet revolver turning machine RDU 260/38 U/min 110-3600 Peak height 125mm Peak 600mm Betsjucqms 380v more
|
|
6
Burgbrohl, Germany
dealership location
18069 km
good (used)
Ramomat lathe hydraulic clamping Collet clamping up to 42 mm possible controlled,. With Icema Stangenmagezin AS 325/32 approx. 4, 5 m long. Accessories: collets etc. Kewvohlr Machine dismantled and stored can be not presented. The machine is little used condition but in a very good and funtionierte to bearings some time ago. Sightseeing in 56659 Burgbrohl by arrangement at any time. Free loading with a forklift and crane car more
|
|
6
Saeed lathe - type 102 HP -Speed 140-3000 1 / min 2sxme08kp With collet chucks, manual, electric and spare parts documentation. Rod feed for 3 m bars. Spindle passage 30 mm and 6 programs. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity.... more
|
|
2
Turret lathe Fabr. EMAG specifications: Tip height 180 mm maximum turning length 400 mm Spindle speeds 55-2000 RPM Outer dimensions 1800 x 800 x 1600 mm with: -Turret Ciqr2g2 Turning tool holders -Clamping Collet fixture with 14 collets up to 32 mm used, in very good condition more
|
|
2
Control: Siemens Bar passage: 8 mm pneumatically driven tools Tools: 2 driven tools are delivered with Yr3tig Bar loading magazine: Iemca CS 112 / 31 the machine is still in production and running on oil more
|
|
5
Turret lathe Fabr. HARDINGE HCT 3 type Masch.# EC 2270 Technical data: Tip height 170 mm Turning length 240 mm 16 spindle speeds 125-3000 rpm. stepless carriage feed 0-100 mm / min. Power 1.5 HP External dimensions approx. 1900 x 800 x 1600 mm Cyg9uv3cm with -Clamping Collet fixture -Three jaw Chuck 125 mm -6-fold turret slide -8 x turret stop -Cutting sled -48 collet chucks up to 28.5 mm -Cooling device -R + L-run very little used, in very good condition more
|
|
3
Control: Siemens Bar passage: 25 mm Ccssikh Drives for driven tools (without tools) Back side machining not possible Tools: 1 driven tool is delivered with Bar feeder: IEMCA Miniboss 325/32 the machine is still in production and running on oil more
|
|
3
Control: Siemens Nnhip Bar passage: 8 mm Bar loading magazine: Iemca CS 112 / 32 CTH the machine is still in production and running on oil more
|
|
2
Control: Mazatrol Bar passage: 40 mm Vsqeui Main and counter spindle tool turret chip conveyor Rod guide: Irco more
|
|
2
Control: Fanuc 31i-Model A Bar passage: 65 mm 8 axes Main and counter spindle 2 turrets with 12 driven stations each Bezvvr3wee Parts removal with conveyor belt tool breakage monitoring Coolant device 10 bar delivery pressure per turret some tools The exact number and types of tools will be discussed during the on-site inspection. Chip conveyor: Hinged belt conveyor Short bar loading magazine: LNS Quick Load more
|
|
3
parts station fire-extinguishing equipment 2 x 5 tool places (not driven) 2zc393oj chip conveyor more
|
|
1
Max. turning length: 657 mm Max. turning diameter: 260 mm Max. bar work capacity: 65 mm / 52 mm Spindle speed: 4500 / 6000 rpm M9orl Chuck size: 8" Main spindle / Sub spindle with y- and c-axis more
|
|
0
Max. turning length: 510 mm Max. turning diameter: 300 mm Max. bar work capacity: 42 mm / 42 mm Spindle speed: 6000 rpm Chuck size: 6" Main spindle / Sub spindle Ba2wh773a7 with y- and c-axis more
|
|
|
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Lathes
Dealer for Lathes
