Lead screw/feed screw lathe / WeilerMata.

Weiler Matador

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - control panel, front left - automatic feeds for face and top support - pole-changing drive motor Nedpfxjxacgds Af Ssdb - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm Nodpfxezbc Dte Af Sjdb turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - Emergency stop button Ndjdpfx Afjxq Hhys Sjb - Operating instructions

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. Nodjxacirjpfx Af Sjdb range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling system and accessories. For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully functional workshop device and features state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. hose set • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 Nsdpeyxvwiefx Af Ssdb _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 is carried out directly via the back of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for demanding applications in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run can be arranged.

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts Ndjdpsxaccxofx Af Sjb - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall

Condition: good (used), functionality: fully functional, Subject to differential taxation according to §25a of the German VAT Act. You will receive a regular invoice. Internal article number: 26057 Lathe Nsdjzx R R Ijpfx Af Sodb Weiler Matador + Multifix "A" baseplate + 3-jaw chuck + Collets + Coolant pump Center height approx. 150mm Turning diameter over carriage 160mm Turning diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Speed range 30 - 3500 rpm Automatic longitudinal/cross feeds Tailstock MK3 Dimensions (L x W x H): 150 x 70 x 150cm Weight: 600kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated storage area of over 500 m².

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Nodpfx Afjx S Rcme Ssdb

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Ndsdpfx Afsxp Rvle Sob

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Nsdpfx Afjxp Ru Ue Sjdb

Condition: used, Year of construction: 2003, centre height 255 mm centre distance 1.080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1.000 mm control EuroTurn spindle bore 70 mm spindle taper KK 8 DIN 55027 3-jaw-chuck diameter 250 mm bed width 360 mm turning speed range 2 - 2.800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder PARAT Gr. 2 Nsdpfewizltjx Af Ssdb drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m - Serial-No.: 495 / 03 - control: EuroTurn - quick change tool holder PARAT - coolant equipment - machine lamp

Condition: ready for operation (used), WEILER Matador VS 2, including a new three-axis digital display, from a school workshop. -Maximum distance between centers: 140 mm -Distance between centers: 500 mm -Spindle speeds: 15 - 3550 rpm -Automatic longitudinal and cross feeds -Threading capabilities: metric, inch, etc. -New three-axis digital display -Electric chuck guard -Work light -Multifix base with inserts -Coolant system -Three-jaw chuck / collet chuck -Tailstock MK 3 -Various tools -Documentation Ndsdpfx Aszr Rnyjf Seb Dimensions: L x W x H: 1.5 x 0.6 x 1.5 meters / Weight: 680 kg Errors and omissions excepted.

Condition: excellent (used), spindle bore: 36 mm, total length: 1,600 mm, total width: 700 mm, total height: 1,400 mm, spindle speed (max.): 3,550 rpm, Weiler Matador VS1 in very good condition. Nodpjzp Uzlefx Af Ssdb Includes accessories as shown in the pictures. Transportation can be arranged.

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm Nedpfx Afotv Riaj Sedb speeds 115 - 1750 U/min table surface area 1000 x 240 mm tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Condition: ready for operation (used), L & Z lathe WEILER MATATOR incl. Heidenhain digital display ND 780 -Center height approx. 150mm -Swinging diameter over carriage approx. 160mm -Swinging diameter over bed approx. 300mm -Distance between centers approx. 500mm -Three-axis digital display / Heidenhain -Collets / quick-change tool holder & various collets -Chuck guard -Chip guard -Multifix base plate & inserts -Spindle bore 36mm -Speed range 30 - 3500 rpm -Automatic longitudinal / cross feeds -Tailstock MK 3 -Three-jaw chuck -Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 600 kg Njdpfxjzpba Us Af Sedb Errors and omissions excepted.