Used vertical turret lathes - double column - faceplate diameter 3000-3999mm for sale (11)

Condition: good (used), functionality: fully functional, Original CNC (not a retrofit from conventional to CNC) Control: Siemens 8-M Faceplate diameter: 3500 mm Max. turning diameter: 4000 mm Max. turning height: 2500 mm Vertical stroke of ram: 1600 mm Horizontal stroke of ram: 2200 mm Ram cross-section: 250 x 210 mm Min. internal diameter: 360 mm Vertical travel of cross-slide: 2000 mm/min Chuck motor power: 71 kW Chuck speed: up to 90 rpm (2-speed gearbox) Table load capacity: 40 tons Feed rate: 1000 mm/min Bledpfx Absxyh Hvj Ter Rapid traverse: 6000 mm/min

Condition: good (used), Year of construction: 2018, functionality: fully functional, Technical details faceplate diameter 3500 mm swing diameter 3800 mm turning height 750 mm Control Siemens 840 D sl Bjdexqn Nrepfx Ab Tjlr Additional information CNC vertical lathe with one turning spindle and two tool carriers on two cross slides The machine has been regularly serviced by the manufacturer and is in mint condition. Technical specifications: Max. swing diameter 3800 mm Max. working height 750 mm Slide travel X1 axis approx. 2800 mm Slide travel X2 axis approx. 3200 mm Slide travel Z axis 1000 mm Rapid traverse X/Z axis 32/20 m/min. Faceplate (turning spindle unit with motor spindle): Speed 100 rpm Torque 67,000 Nm at 40% duty cycle Drive power 200 kW at 100% duty cycle Load capacity (chuck, clamping jaws, and workpiece) 35,000 kg Tool carrier: Double tool holder, Capto C8 For internal and external machining Speed range up to 6000 rpm. Torque approx. 120 Nm at 100% duty cycle Direct coolant supply to the tool holders Double tool holder with swivel axis For turning and drilling (MFU) in conjunction with a tool magazine Equipment: CNC control Siemens 840 D sl Chuck Röhm lever chuck KFG 3500/3/6/12 25-station tool magazine, left of the work area 41-station tool magazine, right of the work area Max. tool diameter 150 mm Max. tool weight 20 kg Tool length 400 mm Tool cleaning with air Chip conveyor Coolant system 6 bar, 80 l/min. Knoll paper belt filter High-pressure coolant pump 70 bar

Condition: good (used), Vertical Turning Lathe SC33 CNC Manufacturer: TITAN (Romania) YOM: 1986 Complete revision of the machine in 2005 Main technical data: CNC Siemens 802D Faceplate diameter: 3000mm Max. turning diameter: 3300mm Max. working height: 3000mm Max. workpiece weight: 18000kg Bjdpfx Abew Eplas Tslr Table speed range: 1.02-92 RPM Working feed range: 0.05-5 mm/rev. Main motor power: 55 kW Overall dimensions: 5600 x 5300 x 5400 mm Weight: 47350 kg The machine is under power.

Condition: used, Year of construction: 2025, faceplate diameter 3.000 mm swing diameter 4.000 mm turning height 2.500 mm Control Fanuc 0i-T max. workpiece weight 30.000 kg table: table diameter 3.000 mm table speeds 1 - 100 1/min power capacity - table 60/75 kW C - Axis: Working speed 0 - 180 °/min max. table speed 0,5 1/min turret slide: Shank diameter 50 mm spindle cone ISO 7/24 No.50 Spindlespeed 15 - 1.500 min/-1 power capacity - Tool Spindle 22 / 26 kW Bodpfx Abovp Scks Tslr ram cross section 300 mm axis stroke: x-axis 2.335 mm z-axis 1.600 mm cross rail adjustment 2.000 mm Tool-Presetter: tool taper MAS BT 50 number of toolpositions 24 (2x12) pos. max. tool weight 90 kg draw bolt DIN.69872 feeds: rapid feed (X / Z) 8 m/min rapid traverse of the crossrail 500 mm/min total power requirement - kW weight of the machine ca. 95 t dimensions of the machine ca. 14,0 x 7,4 x 9,0 m Vertical Turret Lathe - Double Column HANKOOK - VTC 3040 E - NEWMACHINE - price delivered, installed Germany / Europe - Delivery time approx. 14 months - Automatic Tool Changer - 12 turning / 12 milling - Geared box X,Z-axis - Safety system for overload - Hydraulic unit & Coolant system - Auto. Lubrication system for slide way - Lubrication oil cooler - Through tool coolant - NC power off - Splash guard - X-axis slide way protect steel cover - Safety guard rail - Work light & Patrol lamp - Leveling blocks - Foundation bolts and nuts - Tool box with maintenance tools - C-axis scale

Condition: used, Year of construction: 2009, turning height: 3,500 mm, workpiece weight (max.): 20,000 kg, turning diameter: 3,200 mm, faceplate diameter: 2,950 mm, workpiece diameter (max.): 3,300 mm, SCHIESS VERTICAL LATHE CNC FAGOR 8070 (C-AXIS + POWERED TOOL) TECHNICAL SPECIFICATIONS Bljdpfoxh Hmkex Ab Tsr Brand: Schiess Model: TVMF 320-3000 Year: 2009 Max. turning diameter: 3200 mm Max. turning height: 3500 mm Load capacity: 20 t C-axis (0.001°) CNC: Fagor 8070 (70 kW) Chuck diameter: 2950 mm Distance between columns: 3300 mm Angular milling head PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: excellent (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,500 mm, power: 100 kW (135.96 HP), TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.500 2. Min. machining diameter mm 0 3. Max. height of the part mm 3.000 4. Max. load on the table to 30 5. Table diameter mm 3.000 6. Table speed range rpm 2 ÷ 130 7. Main AC motor - turning kW 100 8. The maximum torque of the faceplate in turning mode Nm 105.000 9. Ram vertical stroke (Z axe) mm 1.750 10. Turning ram cross section mm x mm 300x300 11. Horizontal stroke –X axe mm 2.000 12. Feed range (X and Z axe) mm/min 1 ÷ 6000 13. Rapid traverse (X and Z axe) mm/min 8.000 Bodpfxjtpnlws Ab Tolr 14. Feed motor torque (X and Z axe) Nm 22 18. Vertical stroke of the cross rail mm 2.700 CNC Equipment 1. Equipment type Fanuc Overall Dimensions 1. Floor space m 8.5 x 6 2. Max. height of the machine m 8.2 3. Max. height over floor level m 7.4 3. Machine weight to 89 Tool Magazine 1. Number of tool magazines - 1 2. Number of tools/magazine - 16 3. Feed motor torque with encoder Nm 12 4. Tool change time sec. 25 5. Maximum weight of the tool holder - for turning daN 100 6. Maximum length of the tool holder - for turning mm 600

Condition: not inspected (used), Face plate diameter: 3000 mm Turning diameter without side support: 3500 mm Turning diameter with side support: 3300 mm Turning height under tool: 2560 mm Max. workpiece height: 2750 mm Ram stroke vertical: 1500 mm Ram stroke horizontal: 1800 mm Travel distance of side support: 2320 mm Traverse travel: 2100 mm Max. workpiece weight: 20 tons Bedpfx Asvyy Txsb Tjlr Total weight: approx. 75 tons

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: 4159, Maximum machining diameters: 4000 mm / 3500 mm (clamping plate) Clamping plate speed: max. 80 rpm Blodpfxjwqld Nj Ab Tor Maximum workpiece height: 2000 mm Main drive power: 55 Kw Note grinding equipment Maximum workpiece weight: 40t Regular service and maintenance

Condition: new, Year of construction: 2025, turning height: 3,000 mm, workpiece weight (max.): 50,000 kg, turning diameter: 4,200 mm, feed length X-axis: 4,700 mm, feed length Z-axis: 2,000 mm, faceplate diameter: 4,000 mm, feed rate X-axis: 25 m/min, feed rate Z-axis: 15 m/min, rotary table diameter: 4,000 mm, rotational speed (max.): 100 rpm, torque: 128,000 Nm, spindle speed (min.): 3,000 rpm, table load: 50,000 kg, power: 100 kW (135.96 HP), Equipment: rotational speed infinitely variable, TECHNICAL DATA: Machining diameter 4200 mm Bodpoq Ny Dtsfx Ab Tjlr Max. workpiece height 3000 mm Max. workpiece weight 50,000 kg Faceplate diameter 4000 mm Faceplate speed range 0-30/0-100 rpm Max. faceplate torque 128,000 Nm Main drive power 75/90 kW EQUIPMENT: -1-2 support configuration -Machine enclosure -Chip conveyor -Cooling water preparation -C-axis -Fork head -Driven tools/BT50 -Bellows cover -Central lubrication SKF/VOGEL -12-month warranty -Complete electrical equipment 230/400 V, 50 Hz, Made in Germany, CE standard CONTROL: FAGOR or SIEMENS OTHER: Geometry acceptance according to DIN 8609-3

Year of construction: 2016, operating hours: 7,000 h, condition: as good as new (ex-display), machine/vehicle number: 0012, Technical data: 1. Capacities - Maximum turning diameter with either Vertical Head 3300 mm - Maximum machining height under Cross Rail, at least 2000 mm - Maximum weight of the workpiece 20 tons 2. Table - Table diameter 3000 mm - Speed (inf. Variable) 1- 110 RPM - Main motor drive (AC) 100 KW - 4 jaw chuck with reversible jaws 3. Vertical Heads - Straight Ram vertical travel (250X250 mm cross section) 1300 mm - Horizontal and Vertical travel by means of 10 mm pitch ball screws 4. Cross Rail - Vertical Travel 2000 mm Bledpfxodpdfzs Ab Tjr - Cross Rail elevating motor 7.5 KW AC 5. Feeds - Feed ranges 0.1 – 5 mm/rev - Rapid traverse feed 8000 mm/min 6. Overall Sizes - Dimensions (approx.) L x W x H 6600 x 5.300 x 5.400 mm - Weight (approximate) 60 tons GEOMETRICAL TESTS (ISO 3655, ISO 230-1; VDI 3441 and ISO 230-2) Positioning accuracy -X and Z axes mm +/-0,015/1000 Positioning repeatability -X and Z axes mm 0,010 CNC Fanuc

Condition: new, Year of construction: 2025, NEW MACHINE TECHNICAL DATA: Working diameter 3200mm Max. workpiece height 1600mm Bsdecx Rvyjpfx Ab Tjlr Max. workpiece weight 16000kg Face plate diameter 2800mm Face plate rotation speed 0-80U/min Max. torque on face plate 67000Nm Performance of main drive 75kW SETTINGS: -1/2 supports -Capto quick change system / 3-fold steelholder -Telescopic cover -Zentral lubrication SKF/VOGEL -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -machine housing -chip conveyor -cooling water preparation -Turret -driven tools -... CONTROL: FAGOR/SIEMENS OTHER: Geometrie-Abnahme nach DIN8609