Used cNC turning and grinding centers for sale (11)

Condition: good (used), Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, chuck outer diameter: 250 mm, feed length X-axis: 680 mm, feed length Z-axis: 200 mm, power: 39 kW (53.03 HP), rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, controller manufacturer: Siemens, controller model: 840 DS, input voltage: 400 V, coolant supply: 6 bar, nominal power (apparent): 45 kVA, Equipment: rotational speed infinitely variable, type plate available, EMAG VERTICAL SINGLE-SPINDLE TURNING AND GRINDING CENTER EMAG - REINECKER VSC 250 DS Used, year of manufacture 2015 Control: Siemens 840 DS Condition: Used machine in good condition Operating hours (approx.): 35,000 Program run time (approx.): 22,000 hours Operating voltage: 400V Air connection: 6 bar Total power requirement: approx. 45 kVA Cooling unit: water/water Machine dimensions without peripherals (L x W x H): approx. 3200 x 1900 x 2650 mm CYLINDRICAL GRINDING Integrated motor grinding spindle with max. speed 45,000 rpm and max. output 18 kW Touch dressing for ceramic CBN grinding wheels Iedpslfduijfx Adnja Vertical CNC turning and grinding center Automation / Gantry: EKF basket stacker cell as raw/finished parts buffer for baskets 400 x 600 mm on floor rollers 3 basket stacks enable uninterrupted operation even during basket changes, loading/unloading via loading gantry The machine is well-maintained and EMAG serviced. The production process includes pre- and finish machining of the bore and end faces by hard turning the face surfaces, as well as turning the diameter/bore followed by bore grinding. No driven tools Viewing under power is possible by appointment. Dismantling and loading of the equipment are to be carried out by the buyer. Price and further details on request / special price All technical details subject to error/typos. Sale only within EU countries.

Condition: used, Year of construction: 2007, machine/vehicle number: L151804, Nakamura-Tome NTM3 lathe together with a 6-meter IRCO SiMag Breuning bar feeder. The machine has been serviced throughout its life by Abplanalp service, who also disconnected it and prepared it for transport after production was finished. We took it in as a trade-in with plans to start some production, but it turned out to be too large for our needs – so we never even connected it since then. Iodpoxg Nb Iofx Adnja Technical details (from manufacturer): • Year of manufacture: 2007 • 11-axis Nakamura-Tome Super NTM3 • 2 spindles, 3 turrets • Every second tool driven • Control system: Fanuc 16i-TB • Main spindle: 15 kW, up to 4500 rpm • Sub spindle: 11 kW, up to 5000 rpm • Max turning diameter: 190 mm • Bar capacity: 65 mm • Machine weight: 12,000 kg Full documentation included: all manuals and schematics originally supplied with the machine. Additional equipment: • Parts catcher • Parts conveyor • Bar loader: IRCO SiMag • Electrical transformer • IRCO SiMag Breuning bar feeder (6m)

Condition: excellent (used), Year of construction: 1994, Automatic CNC lathe Index GS42 Control Index C200-4 (Sinumerik S3TT) Spindle clearance 42mm, two machining heads (turrets) Turret 1 - X=120mm, Z=220mm, number of tools 12 including 6 driven, capture Ijdpfxoiph Eqs Adnoa Turret 2 - X=120mm, Z=80mm, the number of tools 8 including 4 driven Dynamic C axis Bar feeder with magazine MINI SPRINT 3500mm and a set of reducing bushings Set of collets - 10 pieces Driven holders - 3 pieces Standard holders VDI20 - 5 pieces Machine in 100% working order and in perfect condition (keeps dimensions to 0.001mm)

Condition: ready for operation (used), Year of construction: 2002, MAZAK SUPER QUICK TURN 100MSY CNC Lathe - High-Performance Turning with Y-axis (Price Negotiable!) Manufactured in 2002 in Japan by YAMAZAKI MAZAK CORP., this MAZAK SUPER QUICK TURN 100MSY CNC lathe is built for precision machining of workpieces with a maximum diameter of 280 mm. This machine comes with a comprehensive range of features, enhancing its versatility and productivity. All machining parameters are programmed through the advanced CNC control, which allows for the creation of complex programs in just a few steps. The MAZAK SQT 100 MSY CNC turning center weighs 4720 kg. Technical Specifications: ● Maximum turning diameter: 280 mm ● Maximum bar diameter: 51 mm ● Maximum turning length: 309 mm ● Maximum main spindle speed: 6000 rpm Iedpowpxwmofx Adnsa ● Dimensions (L x W x H): 2100 x 1600 x 1800 mm ● Machine weight: 4720 kg Equipment: ● CNC Control: MAZATROL 640T ● Sub-spindle ● 12-position turret ● Chip conveyor ● Foot control Contact us today to discuss pricing and make an offer!

Condition: used, Year of construction: 2009, Grinding machines Travel distance X: 600 mm Travel distance Y :600 mm Travel distance Z: 335 mm Grinding width: 335 mm Grinding length: 800 mm Iedjw Eki Tepfx Adnea Max. grinding plates: 300 mm Grinding spindle drive: 9,3 kW Speed adjustable: 4200 rpm Distance: table till middle of the spindle: 620 mm Table size: 600 mm Table longitudinal feed oscillation: 50 m/min Table longitudinal feed creep speed: 5 mm/min PA37K – CNC Profile Dressing Device (Diamond Dressing System)

Condition: ready for operation (used), functionality: fully functional, CNC dividing head with stepper motor control, - Divisions from 1-999 possible - Odd divisions also possible - Ideal for face grinding, divisions – saws with high tooth pitch, or even slow cylindrical grinding of circular knives - Can be retrofitted to any tool grinding machine - Rotatable, pivotable in all directions, horizontally and vertically - Easy installation on the machine table using T-nuts - Can also be supplied with a small mounting angle - Center height 190 mm or 140 mm measured from the machine table. - CNC dividing head available with MT5 chuck or SK 40 chuck - Division is triggered via foot switch or optionally a simple contact/switch, etc. on the machine table can be triggered - The division process can be fully automated with the hydraulic machine table or linked via the CNC machine control system. New price: €12,800 Iodjwmd Iropfx Adnsa

Condition: good (used), Year of construction: 2013, operating hours: 59,861 h, functionality: fully functional, Control: Fanuc 32i A Automation: FMB Unirobot MH5LS-SP Grinding spindle: Jäger HF spindle Chuck: MicroCentric 4-410-3-QC Max. Ø80 Chip conveyor: Liqui gravity filter type UR1020 with clean container 180L Year of manufacture: 2013 Hours: 59861h Hardinge GT27SP CNC lathe: Control: Fanuc 32i Axes: 2 (X and Z) Travel paths: From the operating manual measured on the tool top plate Z: 286mm / X: 607mm Spindle speed max.: 6000rpm Dimensions of the machine L x W x H: 1850 x 1750 x 1750 Weight: approx. 2100Kg MARPOSS measuring system with automated dimension compensation Oil mist filter S400 on the machine Spindle cooling possible, currently out of service due to MircoCentric chuck FMB Unirobot MH5LS-SP Robot: Yaskawa Motoman MH005LS Control: DXM100 with handheld programming device Jaws: 3 jaws double gripper system with integrated presser Axes: 6 Serial number robot: RH9G49-3303-1 Serial number robot control: S21K60-2-4-O Year of manufacture: 08/2012 Dimensions of the robot cell L x W x H: 1900 x 950 x 2000 Weight of the robot cell: No exact details approx. 1000kg With blow-off unit Turning station in the robot cell 5x workpiece pallets 400x600mm, side 1: 77 parts / Page 2: 150 parts Liqui gravity filter type UR1020 with clean container Filter type: belt filter Serial number: 33145 Year of manufacture: 2013 Dimensions LxWxH: 1500 x 800 x 1100 Weight: approx. 250Kg Grinding spindle: Jäger SF spindle Type: Z80-M530.05 K1,2CK Max. speed: 30,000 rpm Ijdevntk Tjpfx Adnea Supply voltage: 3-phase 200V-480V AC 50/60hz Frequency converter installed in the control cabinet, operated via external control interface External cooling unit KKG15 1.5kW Grinding spindle holder Grinding wheel holder RINECK Accessories / tools: 2x MAS-MEX20-GT27-1-S385H holder 2x MAS-MEX20 turn sleeve 2x MAS-turn ring 2x hydraulic expansion for internal extractor 1x holder for rotary holder + rotary holder 1x MARPOSS probe with holder

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 1. 13 rotary tool holders (coolant through, 5 radial and 8 face) by ALGRA/MT Marchetti 2. more than 20 steady tool holders for turning and boring tools by ALGRA 3. 4 bolted tool holders by SAUTER/ALGRA 4. a mechanically operated bar puller toolholder by KINTEK 5. a live center 6. balanced pressure clamping (able to grip thin walled parts) Iedpfx Adevy Iqxjnea 7. sets plastic drawtubes for bar working in different diametrers 8. more than 50 sets of soft machined jaws 9. 5 sets of hard jaws for different range of diameters and inside/outside clamping by SMW 10. SMW special ring for soft jaw turning/machining

Condition: new, Year of construction: 2025, The Open CNC HM-100 is the compact model within the TX series and has been developed to meet the growing demand for smaller, rigid and accurate CNC machines for production environments. This machine is specifically designed for users who place high demands on speed, efficiency and precision. While the TX series is optimized for machining large workpieces and automated applications, the HM-100 is perfectly suited for manufacturing smaller workpieces, with the same level of accuracy and reliability. Working range X: 300 mm – 1300 mm (customization possible) Working range Y: 300 mm – 1300 mm (customization possible) Working range Z: 100 mm (customization possible) Input voltage: 220V/380V Software Control : Included Servo motors: 400W Accuracy: 0.05 – 0.1 mm Movement speed: 5000 mm/min Iodpfx Adswm H Ihsnea Machine table : Included Vacuum bed : Optional Automatic tool change : Optional Milling motor: 1.5 kW / 2.2 kW

Condition: excellent (used), Year of construction: 2017, operating hours: 34,536 h, functionality: fully functional, Control: Fanuc 32i A Automation: FMB FANUC UNIROBOT Grinding spindle: Jäger HF spindle Chuck: MicroCentric 4-410-3-QC Max. Ø80 Chip conveyor: Knoll filter system KF110/500 Year of manufacture: 2013 / Commissioning 2017 (exhibition machine) Hours: 34536h Hardinge GT27SP CNC lathe: Control: Fanuc 32i A Axes: 2 (X and Z) Travel paths: From the operating manual measured on the tool top plate Z: 286mm / X: 607mm Spindle speed max.: 6000rpm Dimensions of the machine with robot cell LxWxH: 4600 x 1600 x 2700 without status light Weight: approx. 2100Kg MARPOSS measuring system with automated dimension compensation Oil mist filter S400 on extendable stand 1525 - 2740mm Spindle cooling possible, currently out of service due to MircoCentric chuck FMB Unirobot LR Mate Robot: FANUC LR MATE 200iD7L-P2TB Control: FANUC R30iB Max. part diameter feed: Ø70mm Jaws: 3 jaws Double gripper system for gripping in the bore with blow-off unit Axes: 6 Serial number robot: E-83200 Serial number robot control: E15X36204 Year of manufacture: 10/2015 Dimensions of the robot cell: Robot cell sits on the machine (see photos) Weight of the robot cell: No exact details approx. 1000kg Turning station in the robot cell Conveyor belt raw/finished part converted to 2900mm length each Knoll filter system KF110/500 with Knoll hinged belt conveyor type 320 S-1/50 Filter type: belt filter Serial number: 581402 Year of manufacture: 2014 Tank volume: 500L Pressure: 5-30Bar Dimensions LxWxH: 1750 x 750 x 1550 Weight: No information, estimated at approx. 500-700Kg. Grinding spindle: Jäger SF spindle Type: Z80-M530.08 Max. speed: 30,000 rpm Control panel installed in the machine Frequency converter installed in the control cabinet Grinding spindle holder RINECK grinding wheel holder Accessories / tools: 2x MAS-MEX20-GT27-1-S385H holder 2x MAS-MEX20 turn sleeve 2x MAS-turn ring 2x hydraulic expansion for internal extractor 1x holder for rotary holder + rotary holder Iedpfxovntxkj Adnsa 1x MARPOSS probe with holder

Condition: excellent (used), Year of construction: 2021, operating hours: 14,841 h, functionality: fully functional, Control: Fanuc 32i Automation: FMB UNIROBOT GP7-5Pkhs Grinding spindle: Jäger HF spindle Chuck: MicroCentric 4-410-3-QC Max. Ø80 Chip conveyor: Knoll compact filter with hinged belt conveyor Year of manufacture: 2021 Hours: 14841h Hardinge GT27SP CNC lathe: Control: Fanuc 32i Axes: 2 (X and Z) Travel paths: From operating manual measured on tool top plate Z: 286mm / X: 607mm Spindle speed max.: 6000rpm Dimensions of the machine LxWxH: 1850 x 1750 x 1750 Weight: approx. 2100Kg MARPOSS measuring system with automated Dimension compensation Oil mist filter S400 on extendable stand 1525 - 2740mm Spindle cooling possible, currently out of service due to MircoCentric chuck Iedpfx Adsvnt Dtenja FMB UNIROBOT GP7 Robot: YASKAWA GP7 Control: YASKAWA YRC1000 Jaws: 3 jaws double gripper system with integrated presser and blow-off unit Axes: 6 Machine No.: 11-210314 R 1889290 Year of manufacture: 2021 Dimensions of the robot cell LxWxH: 1850 x 900 x 2000 Weight of the robot cell: No exact details approx. 1000kg Turning station in the robot cell 5x workpiece pallets 400x600mm, side 1: 77 parts / side 2: 150 parts Knoll filter system KF110/570 with Knoll hinged belt conveyor type 320 S-1/50 Filter type: belt filter Serial number: 1513866 Year of manufacture: 2021 Tank volume: 570L Pressure: 5-30Bar Dimensions of the filter system LxWxH: 1800 x 900 x 1900 Weight: No information, estimated at approx. 500-700Kg. Grinding spindle: Jäger SF spindle Type: Z100-M536.03 K1,2S5GS Max. speed: 36,000 rpm Supply voltage: 3-phase 200V-480V AC 50/60hz Frequency converter installed in the control cabinet, operation via external control interface Grinding spindle holder RINECK grinding wheel holder Accessories / tools: 3x MAS-MEX20-GT27-1-S385H holder 3x MAS-MEX20 turn sleeve 3x MAS-turn ring 2x hydraulic expansion for internal extractor 1x hydraulic expansion for rotary holder + rotary holder 1x MARPOSS probe with holder