Centre height: 168/255 mm
centre distance: 750 mm
spindle bore: 42 mm
Ffrrcaep
spindle speed: 40 - 2000 rpm.
drive: 1,5/2,8 kW
Remark:
Röhm three-jaw wedge bar chuck Ø 160 mm,
5 sets of soft top jaws, 1x with hard base jaws,
Tipan quick change tool holder with 6 inserts,
coolant device,
chuck flange Ø 200 mm,
fixed centre punch,
spindle cone sleeve with point,
turret stop,
change gears,
fourfold steel holder,
moving centre punch
Weight: 800 kg
turning length 1000 mm
turning diameter 410 mm
swing diameter over bed slide 255 mm
turning dia. in gap 580 mm
spindle bore 52,0 mm
turning speeds 30 - 3000 U/min
bed width 250 mm
spindle taper 55029 D 1-6
taper in tailstock 4 MK
quill travel 120 mm
total power requirement 5,5 kW
weight of the machine ca. 1550 kg.
range L-W-H 2,03 x 1,0 x 1,45 m
scope of delivery:
- 3-axis digital display ES-12 V with LCD display
- 3-jaw steel chuck PO3-200 mm / D6
- clamping disc 350 mm
- Fixed bezel - pass...
Catalog No. : 5279
Type: SUI 40/1000
Producer: TOS
Made in:
Yeazuynp
Characteristic:
Maximum length of the turning: 1000 mm
Turning diameter over bed (max): 400 mm
Turning diameter over cross slide (max): 220 mm
Weight: 2620 kg
Equipment:
Chuck
Steady rest
Tailstock
turning diameter over bed:0400 mm
turning diameter over slide rest:246 mm
turning length:1250 mm
centre height:195 mm
F7mrs2mr0
spindle bore:54 mm
power capacity:7,5 kW
WORKING RANGE TURNING
- swing diameter (max) 470 mm
- turning diameter (max) 235 mm
- worpiece length max. 1000 mm
BED GAP / BRIDGE
- swing in gap 690 mm
MAIN SPINDLE
- spindle bore diameter 58 mm
- spindle revolutions (min) 20 /min
- spindle revolutions (max) 2000 /min
- number of gears 12
- spindle diameter 58 mm
SCREW CUTTING SPINDLE
- advance z-axis (min.) 0.05 mm/r
- advance z-axis (max.) 0.82 mm/r
- advance x-axis (min.) 0.02 mm/r
- advance x-axi...
Center lathe and center lathe
Manufacturer Matra
type D10
centre height 220mm
centre width 2000mm
Ot0od
in the bend centre height 300mm x L 285mm
max. speed 1250mm
incl. accessories see photos
machine is in a good condition, guides are tip top
Turning diameter over bed 400 mm
centre distance 1000 mm
Delivery time July 2021, subject to prior sale
centre height: 200 mm
turning diameter over bed: 400 mm
turning diameter over cross slide: 235 mm
turning diameter in the bend: 550 mm
bed width: 320 mm
centre width: 1.000 mm
Spindle mounting / DIN55027: No. 6
spindle bore: 52 mm
spindle taper: MK 6
spindle speeds (12): 50-2,240 rpm
Main motor: 4 kW
Number of feeds: 80
longitudinal feed: 0,015 - 0,6 mm/rev
cross feed: 0,0075 - 0,3 mm/rev
Numb...
1 used LZS lathe, make Colchester, type Mascot VS 2000,
year 1993
centre height 230 mm
turning diameter in the bend 730 mm
centre distance 2000 mm
spindle bore 76 mm
Tailstock mount MK 5
Bsncoj0tsy
Infinitely variable speed control
Weight approx. 2.5 t.
(Video under power on request)
Accessories: 3 jaws chuck, quick change tool holder, steady rest, chip guard, coolant pump, 3 axis digital display (Z0 not connected) rotating quill
Catalog No. : 3796
Type: Triumph 2000
Producer: Colchester
Made in: 1970
Characteristic:
Turning length: 700 mm
Turning over bed: 410 mm
Turning over carriage: 240 mm
Chuck diameter: 200 mm
Center height: 205 mm
Distance between the centers: 700 mm
Spindle bore: 56 mm
Bs3ycn8f78
Morse taper- Morse spindle cone 5
Motor power: 7.5 kW 3 PH
Spindle speeds: 2000 rpm
Machine dimensions:
2000 x 900 x 1600 mm
Machine weight: 1200 kg
Accessories:
Pump motor
Electric motors
Headstock
LZ-Lathe KERN Type:DS 20 AL Year 1970
O8ywh
with 3 jaws lathe chuck Forkardt 250mm, tool quick winder holder
Multifix size C with holders coolant device.
turning diameter overbed:500mm
turning diameter overplane : 250mm
centre distance : 1000mm
spindle speed: 12 -1200U/min
Machine can be demonstrated under current
Good guides .
Precision Center Lathe and Center Lathe
Make: OPTIMUM
Model: OPTiturn TZ 4
Item no.: 3432240
Condition: New machine
centre height: 200 mm
centre width: 800 mm
Speed: 45 - 1.800 rpm (16 steps)
equipped as standard with:
- 3-axis digital display NEWALL DP 700
Gikokkup3
- fixed centre MK 3
- quick change tool holder size B
- turning tool holder BD
- Reducing sleeve MK 6 / MK 3
- steady rest fixed ø 10 - 130 mm
- steady rest rotating ø 10 - 100 mm
- Coolant device
- Chip tray, extendable
- LED machi...
turning diameter over bed 420 mm
turning dia. over face-slide 205 mm
turning length 1500 mm
spindle bore 52 mm
spindle turning speed range 1400 U/min
3-jaw-chuck diameter 315 mm
rapid traverse ja
faceplate 400 mm
weight ca. 2600 kg
total power requirement 10,4 kW
Nzxsf
weight of the machine ca. 2,5 t
dimensions of the machine ca. ca. 3500 x 1200 x 1500 mm
turning diameter over bed 820 mm
turning diameter over slide rest 575 mm
turning length 4000 mm
centre height 400 mm
spindle bore 125 mm
spindle turning speed range 5,6 - 1120 U/min
feeds - longitudinal 0,5 - 2,8 mm/U
feeds - cross 0,025 - 1,4 mm/U
thread - mm pitch 0,25 - 560 mm
thread - module 0,0625 - 140 mm
thread - inch 112 - 1/20 inch.
Bjpi2fsi9h
bed width mm
electrics - voltage/frequency 380 V / 50 Hz
total power requirement 28 kW
spindle drive 25 kW
weight of the machine ca. 13 t
dimen...
turning length 1500 mm
turning diameter 460 mm
swing diameter over bed slide 274 mm
turning dia. in gap 690 mm
spindle bore 58,0 mm
turning speeds 30 - 2.000 U/min
bed width 300 mm
spindle taper 55029 D 1-6
taper in tailstock 4 MK
quill travel 130 mm
total power requirement 5,5 kW
weight of the machine ca. 2020 kg.
range L-W-H 2750x1080x1370 mm
Description:
The Solid 460 Vario universal lathe was specially designed to be economical
Manufacture of individual workpieces and small series with hi...
turning diameter over bed:0400 mm
turning diameter over slide rest:246 mm
turning length:1250 mm
centre height:195 mm
Dw0che
spindle bore:54 mm
power capacity:7,5 kW
Turning diameter over bed 535 mm
centre distance 1.000 mm
Delivery time approx. 2 weeks from order placement
turning diameter: 535 mm
centre distance: 1.000 mm
Turning speeds: 21 - 1,500 1/min (18)
spindle bore: 71 mm
3 jaw chuck: 250 mm
centre height: 250 mm
Turning Ø over support: 360 mm
Tailstock quill: Ø 65 x 160 mm
Bi7e2fyibc
motor: 7,5 kW
length: 2.300 mm
width: 1.100 mm
height: 1.400 mm
weight: 1.500 kg
without bridge4fold steel holder with 3 insertsChip splashboardOperating instructions ...
turning diameter over bed 500 mm
turning diameter over slide rest 285 mm
turning length 1000 mm
spindle bore diameter 62 mm
Blnt7w3vvt
mainspindle: turning speeds 11,2-2240 U/min
feed (longitudinal) 0,063-56 mm/U
feed (face) 0,0315-28 mm/U
bed width 360 mm
diameter of quill 80 mm
power capacity 11 kW
workpiece weight 500 kg
Main drive 11 kW
weight of the machine ca. ca. 2,8 t
dimensions of the machine ca. 3,5 x 1.44 x 1,342 m
Equipment/Accessories:
- 3 axis D.R.O
- pnematic chuck
- 3-times ch...
turning diameter over bed: mm
turning diameter over support: mm
turning length: mm
centre height: mm
spindle passage: mm
range of revolution per miute: U/min
total power requirement: kW
Bkzaudx
weight of the machine ca.: 1,6 t
dimension machine xH: m
turning diameter over bed 400 mm
turning diameter over slide rest 210 mm
turning length 1060 mm
center height over bed 200 mm
centre distance 1060 mm
bed width 300 mm
spindle bore Ø 58 mm
spindle taper D 1-6 CAMLOCK
turning speed range 55 - 1600 U/min
3-jaw-chuck diameter 200 mm
Cnw3aaii
quick change toolholder MULTIFIX Typ B
drive capacity - spindle motor 3,2 / 4,9 kW
taper in tailstock-quill MK 4
dia. of quill 55 mm
quill stroke 150 mm
digital readout 3 Achsen HEIDENHAIN
coolant
voltage 380...
Colchester Triumph VS2500 Gap Bed Centre Lathe with 400mm swing x 1250mm between centres. Spindle bore of 54mm. Spindle speeds (infinitely variable) 0-2500rpm. Newall 2 Axis DRO System.
Machine specification
Used Colchester Triumph VS 2500 Gap Bed Centre Lathe
Height of centres 195mm
Swing over bed 400mm
C0vdsgzg
Swing over cross slide 246mm
Swing in gap 585mm
Width in front of faceplate 165mm
Bed length between centres 1250mm
Spindle speeds (infinitely variable) 0-2500rpm
Spindle nose mounting...
turning diameter over bed:0460 mm
turning diameter over slide rest:270 mm
Pvjs0a
turning length:1500 mm
centre height:230 mm
spindle bore:76 mm
power capacity:11 kW
Leit + Zugspindel Lathe VDF BÖHRINGER DUE 400
With 2 axes digital display Heidenhain
Year of construction: 1983
Bgrdslcxql
Spindle bore: 62 mm
Centre distance: 1250 mm
Circulation O over bed : 425 mm
Speed range: 11 - 2240 rpm
With the following accessories:
Multifix tool holder with 1 pc. use
3 Jaw chuck Forkardt 0 250 mm
Travelling Lynette
Fixed Lynette
1 pc. Travelling centring point
sliding protection
chip splash guard
machine light
coolant system
instruction manual
230mm centre height,
460mm swing over bed,
270mm swing over cross slide,
730mm swing in the gap,
1500mm between centres,
76mm spindle bore,
2000rpm spindle speed,
coolant, 3, & 4 jaw chuck, quick change toolpost & holders, 2 axis DRO, fixed steady
Exh2vzxz3
turning diameter over bed: 410 mm
turning diameter over support: mm
turning length: 1000 mm
centre height: 205 mm
spindle passage: mm
range of revolution per miute: U/min
Hgrhm77
total power requirement: kW
weight of the machine ca.: 1,0 t
dimension machine xH: m
transport measurements machine: 2,3 x 0,8 x 1,3 m
turning diameter over bed 320 mm
turning diameter over slide rest 175 mm
turning length 650 mm
turning speed range 96 - 2500 U/min
feeds - longitudinal 0,02 - 0,63 mm/U
feeds - cross 0,32 x Längsvorschub mm/U
3-jaw-chuck diameter max.165 mm
centre height 160 mm
spindle bore 40 mm
spindle head 55027 / 5
Motor power 2,4/ 3 kw
Mechanic: very good
Optical condition: very good
The machine can be viewed under current.
Please notice:
We would be happy to make you a free offer. However, please...
turning diameter over bed 800 mm
turning diameter over slide rest 500 mm
turning diameter in the gap - mm
turning length 3500 mm
turning speeds 1120 U/min
spindle bore 60 mm
Center lathe with
- 3-jaw chuck Forkardt F315
Fz0wvkh
- Quick change steel holder IDEAL with 8 pockets
- Feed in the upper support
- Bezel, diameter max.410mm
- coolant system
- machine light
- Chip tray
turning diameter over bed:0400 mm
turning diameter over slide rest:246 mm
turning length:1250 mm
N9dkx
centre height:195 mm
spindle bore:54 mm
power capacity:5,5 kW
swing diameter: 400turning length: 1000speed range: 70 - 2.000 min¯¹weight approx.: 500
Bdyr8c2nqi
turning diameter over bed 460 mm
turning diameter over slide rest 274 mm
turning length 1000 mm
spindle bore 58 mm
spindle turning speed range 25 - 2000 U/min
turning dia. in gap 690 mm
metric threading 41 / 0,1 - 14 mm
thread - inch 60 / 2 - 112 inch.
thread - module 34 / 0,1 - 7 mm
Whitworth-thread 60 / 2 - 112 TPI
adjustment of the upper slide 140 mm
dia. of quill 60 mm
quill stroke 120 mm
total power requirement 5,5 kW
weight of the machine ca. 1,7 / 2,0 t
dimensions of the machine ca. 2,2 x...
turning diameter over bed: 400 mm
turning diameter over support: 220 mm
turning length: 2000 mm
centre height: 200 mm
spindle passage: Ø 56 mm
range of revolution per miute: 14....2240 / 18 step U/min
feed in x - axis: längs: 0,023 - 4,8 / 42 step mm/U
feed in y - axis: quer: 0,011 - 2,4 / 42 step mm/U
tailstock quill taper MT: MK 5
tailstock quill adjustment:: 230 mm
total power requirement: 12,4 kVA kVA
weight of the machine ca.: 3,0 t
dimension machine xH: 3,5 x 1,3 x 1,7 m
other features of ...
Lathe
Manufacturer Heyligenstaedt
Year of manufacture 1950
Ma. No. 183494
centre height 250 mm
centre width 2.500 mm
total length approx. 4,20 m
speeds 14 to 710 rpm
Weight approx. 2.55 t
item location: 58730 Fröndenberg/Ruhr
The machine can be inspected and tried out under power.
A forklift / crane for loading is available.
There is the possibility to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimen...
turning length 1000 mm
turning diameter 350 mm
turning dia. in gap 450 mm
spindle bore 40,0 mm
turning speeds 70 - 2000 U/min
bed width 180 mm
spindle taper 55029 D 1-4
taper in tailstock 3 MK
quill travel 110 mm
total power requirement 1,5 kW
weight of the machine ca. 529 kg.
range L-W-H 1730x700x1340 mm
Scope of delivery:
- 3-axis digital display i200 with LCD display
- 3-jaw chuck DK11-160 mm / D4
Nlog2
- Face plate 200 mm / D4, according to DIN 55029
- Fixed bezel - passage diam. max. 60 ...
turning diameter over bed:0460 mm
turning diameter over slide rest:270 mm
turning length:1500 mm
Bbrle2wiv7
centre height:230 mm
spindle bore:76 mm
power capacity:11 kW
turning diameter over bed 430 mm
turning diameter over slide rest 250 mm
turning length 1500 mm
centre height 215 mm
Btxbm8zpy9
centre distance 1500 mm
spindle bore 56 mm
spindle turning speed range 19 - 2000 U/min
feeds - longitudinal 0,04 - 2,24 mm/U
feeds - cross 0,02 - 1,12 mm/U
total power requirement 7,5 kW
weight of the machine ca. 2,1 t
dimensions of machine L x W x H 3,52 x 1,2 x 1,45 m
Accessories: 3-jaw chuck 250 mmø, 4-pos. tool holder
turning diameter over bed 460 mm
turning diameter over slide rest 274 mm
turning length 2000 mm
spindle bore 58 mm
spindle turning speed range 25 - 2000 U/min
turning dia. in gap 690 mm
metric threading 41 / 0,1 - 14 mm
thread - inch 60 / 2 - 112 inch.
thread - module 34 / 0,1 - 7 mm
Whitworth-thread 60 / 2 - 112 TPI
adjustment of the upper slide 140 mm
Bsrfyn7r2m
dia. of quill 60 mm
quill stroke 120 mm
total power requirement 5,5 kW
weight of the machine ca. 1,7 / 2,0 t
dimensions of the machin...
turning diameter over bed 400 mm
centre distance 1000 mm
Delivery time prompt, subject to prior sale
centre height: 200 mm
centre distance: 1.000 mm
spindle bore: 52 mm
Speeds: 55-2,000 (18) rpm.
Engine: 1.5/2.4 kW
bed width: 218 mm
Turn Ø over bed: 400 mm
Length: 1.800 mm
width: 800 mm
height: 1.650 mm
Hpn7sll
Weight: 850 kg
3-axis digital display with bridgeQuick-change tool holder with 4 inserts for square tool fixed Lynette rotating Lynette3 jaws Chuck Ø 200 mm incl. 1 thread. Interchangeabl...
turning diameter over bed: 455 mm
turning diameter over support: 280 mm
turning length: 1500 mm
centre height: 230 mm
spindle passage: 80 mm
range of revolution per miute: 20 - 1600 / 15 step U/min
feed continuous: längs: 0,04 - 1 mm/U
feed continuous: quer: 0,02 - 0,5 mm/U
tailstock quill taper MT: MK 5
tailstock quill adjustment:: 190 mm
total power requirement: ca. 7,5 kW
Bt8g9hridj
weight of the machine ca.: 2,5 t
dimension machine xH: 2,8 x 0,95 x 1,4 m
-Upper support rotatable 90° right/le...
turning length 1000 mm
turning diameter 360 mm
swing diameter over bed slide 220 mm
turning dia. in gap 502 mm
spindle bore 52,0 mm
turning speeds 70 - 2.000 U/min
bed width 185 mm
Beobnshp2c
spindle taper 55029 D 1-5
taper in tailstock 3 MK
quill travel 100 mm
total power requirement 1,5 / 2,2 kW
weight of the machine ca. 575 kg.
range L-W-H 1825 x 750 x 1600 mm
scope of delivery
- 3-axis digital display i200 with LCD display
- 3-jaw chuck DK11-200 mm / D5
- Face plate 200 mm / D5, according...
turning diameter over bed:0400 mm
turning diameter over slide rest:246 mm
turning length:1250 mm
centre height:195 mm
spindle bore:54 mm
power capacity:7,5 kW
Giho3vlb3
turning diameter over bed 490 mm
turning diameter over slide rest 280 mm
turning length 1000 mm
bed width 350 mm
slide valve travel 300 mm
upper head travel 140 mm
spindle bore 63 mm
number of spindle speeds 24
spindle turning speed range 11,2 - 2240 U/min
diameter of quill 70 mm
quill stroke 160 mm
taper of tail spindle MK 5
chucking diameter max. 315 mm
drive motor 11 kW
tool-holder Multifix Gr. B
CE-Certificate .
halogen machine lamp .
coolant .
digital readout neue Digitalanzeige!
tot...
turning diameter over bed 460 mm
turning diameter over slide rest 274 mm
turning length 1500 mm
spindle bore 58 mm
spindle turning speed range 25 - 2000 U/min
turning dia. in gap 690 mm
metric threading 41 / 0,1 - 14 mm
thread - inch 60 / 2 - 112 inch.
thread - module 34 / 0,1 - 7 mm
Whitworth-thread 60 / 2 - 112 TPI
adjustment of the upper slide 140 mm
dia. of quill 60 mm
quill stroke 120 mm
total power requirement 5,5 kW
weight of the machine ca. 1,7 / 2,0 t
dimensions of the machine ca. 2,2 x...
diameter 400 mm
Pveklm
turning diameter over bed 560 mm
turning diameter over slide rest 280 mm
turning diameter in the gap - mm
Ytgcgw
turning length 1500 mm
turning speeds 9 - 900 U/min
spindle bore 63 mm
connected load kW
weight of the machine ca. 3,5 t
dimensions 3,3 x 1,4 x 1,7 m
Center lathe with
- 3-jaw chuck Forkardt F315
- Quick change steel holder IDEAL with 8 pockets
- Feed in the upper support
- Bezel, diameter max.410mm
- coolant system
- machine light
- Chip tray
turning diameter over bed 430 mm
turning diameter over slide rest 260 mm
Cne8dof3
turning length 1000 mm
total power requirement 8 kW
weight of the machine ca. 2.500 kg
dimensions of the machine ca. m
turning diameter over bed:0400 mm
Bjwynhhv9c
turning diameter over slide rest:246 mm
turning length:1250 mm
centre height:195 mm
spindle bore:54 mm
power capacity:7,5 kW
turning diameter over bed:400 mm
turning diameter over slide rest:250 mm
turning length:1000 mm
max swing over gap:520 mm
Height of centres:200 mm
crossed path:230 mm
bed width:218 mm
main spindle bore:52 mm
spindle size:MK 6
speeds::55-2000 U/min
turning angle of tool post:90 grad
tail stock:50 mm
taper in tailstock:MK 4
threading metric:0,4-7 mm
threading WHITWORTH:4-60 TPI
total power requirement:2,2 kW
dimensions of the machine ca.:1940 x 820 x 1545 mm
weight of the machine ca.:750 kg
ta...
Machine is great working condition
H2m3b8l
- included knife holders
- included one box of jaw chuck clamps for aprox (2500 eur)
Machine will be free loaded on truck for customer.
WE ORGANIZE TRANSPORT AS WELL WITH A ADDDITIONAL OFFER.
AMC lathe offered.
Type: 490
Turning diameter bed: 400 mm
Turning diameter support: 230 mm
Spindle bore: 40 mm
Turning length: 1200 mm
Diameter faceplate: 315 mm
Speed max: 2500 RPM
Dimensions: 260x110x125 cm LxWxH
Syvfu3dp
For more information call us or send an e-mail.
turning diameter over bed 330 mm
turning diameter over slide rest 210 mm
turning length 635 mm
turning diameter in the gap 480 mm
turning speeds 58 - 2500 U/min
centre height 167 mm
spindle bore 40 mm
tailstock quill taper MT 3 MK
total power requirement 2,2 kW
weight of the machine ca. 0,8 t
Bogxopgxfx
Center lathe with
- 3-jaw chuck F 315
- Fixed tailstock top
- Multifix holder
- 2-axis digital display
- Fixed Lynette 180 mm
- Coolant system
- rapid traverse
Turning diameter over bed 630 mm
Top width 2000 mm
Delivery time approx. 8 weeks from order placement
Tip height: 315 mm
Turning diameter over bed: 630 mm
Swing over cross slide: 430 mm
Turning diameter in the bend: 830 mm
Bed width: 400 mm
Gvrhp8
Top width: 2,000 mm
Spindle carrier / DIN55027: No. 11
Spindle bore: 103 mm
Spindle taper: M 120
Speeds (variable with 3 levels): 16-63; 63-250; 315-1,250 RPM
Main motor: 11 kW
Feed number: 120
Longitudinal feed: 0.04-12 mm / Rev
Cross feed: 0.02-6 mm ...
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Sample sales contract for used machines in nine languages
Morlock Motors official partner of Machineseeker and Truckscout24
Sell now on Machineseeker! Over 220,000 inquiries per month
Photo gallery: The World's 10 biggest excavators
Photo gallery: the 10 strongest forklift trucks in the world
