Used CNC lathes 700-999mm turning diameter for sale (52)

Condition: excellent (used), Year of construction: 2008, turning length: 3,000 mm, spindle bore: 155 mm, spindle motor power: 51,000 W, total height: 3,200 mm, total length: 9,500 mm, total width: 3,200 mm, turning diameter over bed slide: 1,420 mm, workpiece weight (max.): 5,000 kg, overall weight: 16,000 kg, Make: Krewema Type: HFDM 55 Control: SIEMENS 840D YOP: 2008 4 chuck 1600 mm 4 chuck   900 mm 3 chuck   630 mm ( bore 310) Sauter 8 position revolver Vdi 60 tool system Internal coolant tool holder Radial live tool holder Hfelhccoz R Rdmsqmsn Axial live tool holder Chip conveyor double  Internal coolant tool holder Swing over bed Ø: 1420mm Swing over cross slide Ø:920mm Swing in the gap Ø: 2050mm DBC Turning Length: 3000/4000mm Gap length: 1000mm Spindle bore: 155mm Spindle power: 51kW Bed width: 750mm Tailstock spindle Ø: 160Ø Stroke pinole: 300mm Workpiece weight: 5000 Speeds / ranges: 1200Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 6000mm/min. Length: 9500mm Width: 3200mm Height: 3200mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1989, CNC turning machine WEILER Primus 2 CNC, serial number 160, CNC Bosch. Hjlhccjz R R E Nsqmsfn

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 3,000 mm, turning diameter: 700 mm, SMTCL CAK80285D CNC horizontal lathe, year of construction 2011, with original FANUC control. Offered for sale by the first owner. All maintenance has been carried out without exception; the machine is still in active, trouble-free production use. It has not been heavily used - a machine with plenty of life left. Bed ways and slide surfaces are clean and in very good condition. Technical data: - Turning diameter over bed: 700 mm - Turning diameter over cross slide: 500 mm - Turning length / machining capacity: 3,000 mm (3 m) - Control: FANUC (original) Helhez An Ryeccqmjfn Can be inspected under power in our workshop and is ready for immediate delivery.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, turning diameter over cross slide: 950 mm, turning length: 4,000 mm, turning diameter: 950 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 2 rpm, travel distance Z-axis: 4,000 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret Hslhcjzzq Sqocqmofn 2 x Fixed Steadies

Condition: used, Year of construction: 1991, CNC turning machine HEYLIGENSTAEDT HEYNUMAT 24U/1500 with C-axis Year of manufacture: 1991 CNC control: SIEMENS 3T Spindle speed range: 9–2,240 rpm, 2 gear stages 3-jaw chuck: • FORKARDT 3NHF-400-120, Ø 400 mm • FORKARDT KS 500, Ø 500 mm Steady rest: SMW SLK Tool turret: TWS • Shank size: 60 mm • 12 tool stations Tailstock: • Quill diameter: Ø 160 mm • Quill stroke: 160 mm Chip conveyor: MAYFRAN Swinging diameter: • over bed: Ø 900 mm • over cross slide: Ø 800/770 mm Hslhccqjz I Syasmjfn Main drive power: 55/75 kW Machine weight: approx. 12,000 kg Robust and powerful CNC turning machine with SIEMENS 3T control, large spindle speed range and high drive power. Equipped with FORKARDT chucks, TWS tool turret, SMW steady rest and MAYFRAN chip conveyor. Machine data sheet with equipment & technical data – see PDF. All technical specifications, illustrations and content are non-binding and without warranty. Subject to change and errors. All other accessories visible in the photos and video are not included in the scope of supply and are therefore not part of this sale. The scope of supply only includes the accessories that are explicitly listed here, in the order confirmation and invoice. FCA (Free Carrier) D-92729 Weiherhammer including disassembly, removal and loading onto the truck Delivery time: immediately Subject to prior sale / payment immediately upon completion of purchase

Condition: reconditioned (used), Year of construction: 2006, turning diameter over cross slide: 700 mm, turning length: 3,000 mm, turning diameter: 1,000 mm, spindle bore: 104 mm, total height: 2,600 mm, total length: 7,800 mm, total width: 2,300 mm, overall weight: 14,000 kg, Swing over bed Ø: 1000mm Swing over cross slide Ø:700mm DBC Turning Length: 3000mm Spindle bore: 104mm Bed width: 900mm Tailstock spindle Ø: mk5Ø Stroke pinole: 300mm Workpiece weight: 4800 Power: 35A Speeds / ranges: 1600Rpm Holhccez R Nrbsqmjfn Length: 7800mm Width: 2300mm Height: 2600mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 5-axis CNC turning and milling center Okuma Multus B550-C 2000 Control: OSP-P300SA-H Year of manufacture: 2019 Internal machine number: 71 Travel distances: X-axis: 925 mm Y-axis: 520 mm Helhccezwulyeqmefn Z-axis: 2,215 mm Distance between centers: 2,000 mm Turning diameter over bed: 830 mm Spindle bore: 112 mm Tool holder HSK-A100 40-position tool changer Programmable steady rest with hydraulic quill Equipment - Chip conveyor Interlit ISF - Full-stroke cylinder - 6-jaw power chuck SMW Ø 500 IEP - Manual rinsing gun - Drum – trough filter TMF300/980/20 - IFS filter system IFE 5000 - Robot interface Type E - One Touch IGF - Software for input resolution of 0.1 µm - Software package for simultaneous 5-axis machining VTM-1200YB and VTM-2000YB - In-process measurement with Renishaw measuring probe for X/Z/C axis - Automatic zero point adjustment in the Z-axis of the main spindle - High-precision C-axis - Turning function for NC B-axis - Interpolation turning with the X/C/Z axes

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 710 mm, turning length: 2,000 mm, turning diameter: 1,000 mm, spindle bore: 128 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 2 m/min, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, total height: 2,250 mm, total length: 5,800 mm, total width: 2,005 mm, quill travel distance: 280 mm, quill diameter: 125 mm, swing diameter over cross slide: 710 mm, torque: 4,260 Nm, overall weight: 10,100 kg, Equipment: documentation/manual, - Swing diameter over bed: 1000 mm - Swing diameter over cross slide: 710 mm - Feed rate in X, Z axes: 0.01–50 mm/rev - Feed speed in X/Z axes: 5/2.5 m/min - Rapid traverse in X/Z axes: 10/5 m/min - Feed force in X/Z axes: 20,000/12,500 N - Constant cutting speed: 1–9999 m/min - Distance between centers: 3300 mm - Faceplate diameter: 900 mm - 3-jaw chuck diameter: 500 mm - Bed width: 560 mm - Cross slide travel: 540 mm - Top slide travel: 250 mm Helsya Dz Dohccqmefn - Metric thread pitch: 0.1–400 mm - Spindle nose: KK 11 DIN 55027 - Number of motor gear stages: 2 - Spindle speed range (first gear): 6.3–360 rpm - Spindle speed range (second gear): 28–1600 rpm - Spindle bearing diameter (front): 170 mm - Spindle bore diameter: 128 mm - Spindle internal taper: 136 metric - Tailstock quill diameter: 125 mm - Tailstock quill stroke: 280 mm - Tailstock quill internal taper: Morse 6 (MK6) - Cross slide dimensions (L x W): 1005 x 320 mm - Top slide width: 200 mm - Tool cross-section per DIN 770: 40 x 25 mm - Main drive power (60%/100% duty): 46/37 kW - Main drive torque (60%/100% duty): 5300/4260 Nm - Total power requirement: 60 kVA - Power supply: 400 V - Control cabinet dimensions (L x W x H): 1800 x 500 x 1600 mm - Machine dimensions (L x W x H): 5800 x 2005 x 2250 mm - Machine weight: approx. 10,100 kg CNC controller: SIEMENS SINUMERIK - Toolholder: MULTIFIX type D - AC servo drives - Reliable stepless AC main drive - Work area lighting

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: Hfjley Sub Hohccqmen CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,500 mm, turning diameter: 720 mm, travel distance X-axis: 800 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 30,000 W, total height: 2,500 mm, total length: 5,000 mm, total width: 3,000 mm, workpiece weight (max.): 1,500 kg, type of input current: three-phase, overall weight: 16,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Mazak Integrex 50 YB × 1500 – CNC Multi-Tasking Machine Heavy-duty, versatile CNC turn-mill center with live tooling, B-axis, Y-axis, and a large chain tool magazine. Well-suited for demanding high-precision machining with heavy workpiece loads. Key highlights: Large capacity: 1,500 mm between centers, 710 mm swing over bed Heavy workpiece capacity: up to 1,500 kg shaft work / 400 kg chuck work Full multi-tasking axes: C-axis (0.001°), B-axis swivel (210°, 0.001° indexing), Y-axis (±105 mm) Hfolhcozugfyscqmon High tool capacity: chain magazine for 90 milling / 30 turning tools (ISO 50 CAT taper) Capacity & dimensions: Max swing over bed: 710 mm Max swing over cross slide: 520 mm Swing range depending on Y-axis position: 310–710 mm Distance between centers: 1,500 mm Max workpiece weight (incl. chuck): 400 kg chuck work / 1,500 kg shaft work Machine weight: 14,500 kg Main spindle & C-axis: Spindle speed: 5–3,000 rpm (stepless, 4 speed ranges) Main motor (AC): 30 kW (30 min) / 22 kW (continuous) Max torque: 314 kpm (approx. 3,080 Nm) C-axis indexing: 0.001° Turret, axis travels & rapid traverse: Turret swivel (B-axis): 210°, indexing 0.001° Travels: X 680 mm · Z 1,612 mm · Y ±105 mm Rapid traverse: X 12 m/min · Z 15 m/min · Y 10 m/min Z-axis feed force: 2,840 kp max (approx. 27.9 kN) / 1,150 kp continuous (approx. 11.3 kN) Tool shank: OD turning 25 × 25 × 150 mm / boring bar Ø50 mm Milling spindle & live tooling: Speed range: 18–6,000 rpm Milling motor (AC): 15 kW (30 min) Tool taper: ISO 50 CAT Automatic tool changer (ATC): Type: chain magazine Capacity: 90 milling tools / 30 turning tools Max tool diameter: 120 mm Max tool length: 460 mm Turning tool length (using B-axis): 165 mm Max tool weight: 20 kg Tailstock: Type: programmable quill and body Quill travel: 130 mm Quill diameter: 130 mm Quill taper: MT 5 (MK 5) Max clamping force: 1,500 kp (approx. 14.7 kN)

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. Heloxrf Stehccqmjfn As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CNC turning and milling center Okuma Multus B400 1SC-1500 Control system: OSP-P200L Hjlozwl U Sjhccqmofn Year of manufacture: 11/2010 Internal machine number: 61 X-axis: 690 mm Y-axis: +115 / -115 = 230 mm Z-axis: 1,545 mm B-axis: up to 225°, positioning in 0.001° C-axis: 360° / 0.001° Turning length: 1,500 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 40 positions Equipment: - Chip conveyor - 3-jaw chuck SMW KNCS-N-340-117 - Paper band filter system ISF 540/6670 - One Touch IGF - Tailstock - Touch setter

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Height: 3409mm Hslhccqeztctqomjfn Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1950, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 4, turning diameter over cross slide: 560 mm, turning length: 3,150 mm, turning diameter: 800 mm, spindle motor power: 20 W, rotational speed (min.): 10 rpm, rotational speed (max.): 300 rpm, total height: 1,800 mm, total length: 6,000 mm, total width: 1,500 mm, workpiece weight (max.): 3,000 kg, type of input current: AC, overall weight: 8,000 kg, Köpping Heavy-Duty Lathe with all the accessories Hfjlhccqez Hlfyomjn

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC turning and milling center Okuma Multus B300 Control: OSP-P200L Year of manufacture: 2007 Internal machine number: 60 Travel ranges: X-axis 690 mm Y-axis 230 (-115 to +115) mm Z-axis 1,545 mm B-axis 0.001 ° C-axis 360 ° W-axis: 1,550 mm Max. turning diameter: 710 mm Tool holder: HSK 63 Total number of tool positions: 40 Spindle speed: 38 – 3,800 rpm Equipment / Accessories Hslhccszwl S Rsqmefn - Chip conveyor - 3-jaw chuck SMW KNCS-N-260-72 - Compact paper band filter system 500 l - One Touch IGF

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 720 mm, turning length: 3,500 mm, turning diameter: 780 mm, spindle bore: 123 mm, swing diameter over cross slide: 780 mm, workpiece weight (max.): 3,000 kg, overall weight: 29,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Hslhezkthtsccqmofn

Condition: used, Year of construction: 2004, turning diameter 620 mm turning length 2000 mm control MSX 501 Holhccqez Icunjmefn total power requirement 30 kW

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 1,500 mm, turning diameter: 710 mm, Used Okuma Multus B400W Max. turning diameter Ø 710 mm Hfelhoyrf T Sjccqmsn Turning length 1500 mm Kuka robot 140 kg without handling attachment 2 spindles, 7 axes, loading conveyor - loading station - unloading station - 950 mm swing 12+15" chuck 70 bar high-pressure pump

Condition: used, Year of construction: 1996, Weiler Guide and Pull Spindle Lathe Type/Model: Condor AC Condition: Used Year of Manufacture: 1996 Technical Data: Center height: 165 mm Distance between centers: 750 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 180 mm Spindle bore: Ø 40 mm Spindle speed, stepless: 22 - 2,800 rpm Spindle head: DIN 55027 Size 5 (short taper) Drive power: 5.5 kW Tailstock and feeds: Tailstock internal taper: MK 3 Quill stroke: 110 mm Feed range automatic longitudinal and cross feeds: approx. 0.016 - 0.50 mm/rev Thread cutting range suitable for metric threads and inch threads: approx. 0.20 - 28 mm Holhjzfgupeccqmofn Dimensions (L/W/H): approx. 2000 mm x 860 mm x 1600 mm Weight approx.: 1,100 kg Equipment: - Quick-change tool holder system Multifix, 1 insert size A - Bed stop - Coolant system - Chuck guard with limit switch - Collet chuck system, limit switch secured Costs for delivery by freight forwarder, free to curb, see shopping cart or in individual offers for request items.

Condition: excellent (used), Year of construction: 2008, turning length: 1,609 mm, spindle bore: 110 mm, travel distance X-axis: 335 mm, travel distance Z-axis: 1,609 mm, spindle motor power: 26,000 W, rotational speed (max.): 2,100 rpm, total height: 2,100 mm, total length: 3,800 mm, total width: 2,100 mm, CNC Lathe with c-axis VIPER - VT-33LMBC MACH-ID 9473 Make: VIPER Type: VT-33LMBC Control: Fanuc 21iTB Year: 2008 Tooling holders included Live driven Axiaal tools included  Live driven Radial tools included Chip conveyor Tool eye arm Motorized Tailstock 3 chuck 400 mm with extra2008 jaws Max. turning Ø: 780mm X-Axis: 335mm Z-Axis: 1609mm Spindle bore: 110mm Speedrange: 2100Rpm Spindle power: 26kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:4.5kW Chip conveyor: yes Tool eye: yes Pinole taper: 5Mk Stroke pinole: 110mm Quill Ø: 100mm Helhcoyw Ii Uecqmefn Length: 3800mm Width: 2100mm Height: 2100mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, OKUMA MAC TURN 350-W is a CNC Lathe-Milling Center, engineered for precision, high accuracy and reliability. Capacities: turning Ø 530 mm (over cross-slide), 550 mm (over bed); spindle hole 62 mm; turning length 1625 mm; Z 1670 mm, X 505 mm, Y ±95 mm (190 mm). Specs: 9 axes; C axis 360° res. 0.001°; B axis swivel 210° res. 1°; spindle speeds up to 5000 t/min (main and back spindle); milling cutter speeds 6000 t/min; spindle motor 22/15 kW. Equipment: 44-station tool changer, chip conveyor. Delivers tight tolerances; ideal for automotive, aerospace, medical and precision manufacturing. Hfelhccozqbkpeqmen

Condition: reconditioned (used), Year of construction: 2003, Universal Lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE control (SIMATIC PANEL TOUCH SCREEN) Year of manufacture: 2003 Spindle bore: 52 mm Distance between centers: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Cross slide travel: 185 mm Infinitely variable speed range: 14 – 3550 rpm Including the following accessories: Sliding guard with internal lighting Multifix tool holder with 2 inserts 3-jaw chuck SCHUNK ROTA plus Ø 200 mm Hfolhccqsxn Ar Aemen 2 sets of soft top jaws Coolant system Chip blow gun 6 machine feet Operating manual The machine is in very good condition!

Condition: used, Year of construction: 1998, turning diameter max. 250 mm turning length max. 900 mm control FANUC SERIE 0-T turning spindle Durchlass 75mm chuck diameter 250 mm turning speeds 0-3700 U/min transmission ratio 2 tool numbers 12 feed speeds X/Z 15/20 mm/min quill stroke 100 mm diameter of quill 110 mm tool adaptor MK 4 coolant tank 130 l Hfolheucgxueccqmen weight - pallet system 5500 kg

Condition: good (used), Year of construction: 1996, functionality: unexamined, turning diameter over cross slide: 700 mm, turning length: 2,000 mm, turning diameter: 700 mm, spindle bore: 106 mm, spindle speed (max.): 1,800 rpm, For sale: 1 used rotary lathe Manufacturer: Weiler Werkzeugmaschinen Hjloy R Dyvehccqmefn Type: E70 Year of manufacture: 1996 Technical data: Center height: approx. 355 mm Swinging diameter over bed: approx. 700 mm Swinging diameter over cross slide: approx. 420–450 mm Distance between centers: 2000 mm Spindle bore: 106 mm Includes the documentation shown in the pictures, chip conveyor, and Sauter tool holder. The machine can be viewed at our warehouse in 09599 Freiberg.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 712 mm, turning length: 930 mm, turning diameter: 712 mm, travel distance X-axis: 450 mm, travel distance Z-axis: 930 mm, spindle motor power: 7,500 W, rotational speed (min.): 40 rpm, rotational speed (max.): 1,800 rpm, total height: 2,000 mm, total length: 2,420 mm, total width: 1,700 mm, type of input current: three-phase, overall weight: 3,200 kg, Equipment: documentation/manual, Special Offer – 5% Discount Available! Hfjlhccszf Immjqmon Availability: in stock from 24 November 2026 – reservation required. CNC Wheel Repair Lathe MTP28 The MTP28 CNC Wheel Repair Lathe is a professional machine designed for the refurbishment, repair, and precision machining of alloy wheels from 12" to 28". Equipped with an advanced CNC control system, it delivers outstanding machining accuracy, excellent surface finish, and consistent repeatability. It is the ideal solution for wheel refurbishment specialists, automotive workshops, and alloy wheel repair centers. The machine features an automatic wheel probing system that quickly scans the wheel profile and simplifies programming, significantly reducing setup time and increasing productivity. Its intuitive 15-inch touchscreen CNC controller makes operation simple and efficient. A fully enclosed working area, rigid machine construction, and powerful 7.5 kW spindle motor ensure maximum safety, reliability, and long service life, even during intensive daily operation. Standard Equipment • CNC control system with 15-inch touchscreen • Automatic wheel probing system with dedicated software • Fully enclosed safety enclosure • 12-inch 3-jaw chuck Technical Specifications • Wheel size range: 12"–28" • Maximum wheel diameter: 712 mm • X-axis travel: 450 mm • Z-axis travel: 930 mm • Chuck: 12-inch 3-jaw chuck • Spindle motor power: 7.5 kW • Spindle speed range: 40–1800 rpm • Rapid traverse (X-axis): 5 m/min • Rapid traverse (Z-axis): 7 m/min • Cutting feed: 0–200 mm/min • Bed width: 400 mm • Machine dimensions: 2420 × 1700 × 2000 mm • Machine weight: 3200 kg Key Features • Professional alloy wheel refurbishment and repair • High machining accuracy and repeatability • Automatic wheel surface probing • Suitable for wheels from 12" to 28" • Easy-to-use 15-inch touchscreen CNC control • Heavy-duty industrial construction • Fully enclosed and safe working area • Low operating costs • High productivity and excellent surface finish Transport & Delivery We provide professional transport and delivery throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, properly protected, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements to ensure safe and efficient delivery. Worldwide shipping outside Europe is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery, supplying reliable equipment to customers throughout Europe. We provide expert technical advice, machine configuration, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.