Used Center Lathe for sale (16,308)

Condition: used, turning diameter over bed 280 mm turning diameter over slide rest 160 mm turning length 500 mm centre height 140 mm centre distance 500 mm Duslox Ni Dkjhccqlsn spindle bore 36 mm spindle turning speed range 15 - 3550 U/min spindle head DIN 55022 Gr. 5 feeds - longitudinal 0,008 - 0,560 mm/U feeds - cross 0,004 - 0,280 mm/U thread - mm pitch 0,2 - 12 mm dia. of leadscrew 24 mm lead of leadscrew 6 mm tailstock taper MT 3 tailstock quill stroke 90 mm tailstock adjustment out of the central pos. 15 mm total power requirement 2,2 kW weight of the machine ca. 0,6 t - machine out of teaching shop - Accessories: DRO on 3 axis, 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head A

Condition: used, Year of construction: 1978, Technical details: turning diameter over bed: 1450 mm turning diameter over slide rest: 1000 mm turning length: 8000 mm spindle bore: 160 mm turning speed range: 2,8 - 560 U/min bed width: 850 mm faceplate diameter max.: 1400 mm turning diameter in the gap: 1800 mm length of gap: 600 mm Duolhjyidw Ioccqlon dimensions of the machine ca.: 12 x 2 x 2,5 m with Digital Readout 2 fixed steadies dia 1070 mm chip conveyor *

Condition: ready for operation (used), turning diameter over bed 500 mm turning diameter over slide rest 310 mm turning length 3000 mm turning diameter in the gap 750 mm centre height 250 mm turning speeds 20-1000 U/min no. of turning speeds 18 spindle bore 56 mm Duelhcoxl E Saecqlen longitudinal feed 0,045-1,09 mm/U face feed 0,025-0,625 mm/U number of feeds 55 total power requirement 4 kW weight of the machine ca. 2,37 t dimensions of the machine ca. 4,9 x 1,1 x 1,3 m

Condition: good (used), Year of construction: 1993, turning diameter over bed 400 mm turning diameter over slide rest 210 mm turning length 1060 mm centre height 200 mm spindle bore 58 mm spindle taper: Camlock D 1-6 Drive 3,2/4,9 kW spindle turning speed range 16, von 55 bis 1600 U/min feeds - longitudinal 0,039-0,541 mm/U feeds cross 0,019-0,271 mm/min. weight of the machine ca. 1,45 t dimensions of the machine ca. 1900 x 870 x 1700 mm High-quality machine with induction-hardened guideways, torsionally rigid bed, main spindle made of chrome-nickel steel, surface-hardened and ground gears, Dslheyhq Tpjccqloun automatic circulating lubrication in the spindle housing, slip clutch in the support, bed lubrication via hand pump, Siemens electrical system. Thread feeds for metric, inch, module, and diametral pitch. 3-axis digital readout: 2 scales are mounted, the scale on the top slide has been replaced but still needs to be mounted. The display unit is for lathes and therefore, with the appropriate setting, adds the slide travel to the top slide travel. The machine was only used in a prototype workshop for sporadic applications. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 1971, turning diameter over bed 800 mm turning diameter over slide rest 480 mm turning length 3000 mm Dujlhcswwatrscqljn turning diameter in the slot 850 mm center height over bed 380 mm bed width 550 mm spindle head DIN 55022/8 spindle bore 73 mm speeds 18 - 900 U/min feeds 224 / 0,018-10 mm/U thread - mm pitch ca. 84: 0,2 - 224 mm total power requirement 17,5 kW weight of the machine ca. 8,6 t dimensions of the machine ca. 5,5 x 1,8 x 1,72 m Solid universal lathe with rapid longitudinal and transverse support traverse, pole-changing spindle motor (i.e., two speeds can be selected by increasing the motor speed), single-lever control for all support movements, pre-selected feed rates, hardened bed guides, double-tiebar bed for high rigidity, high- positioned front guideway and low-positioned rear guideway in the V-prism for high accuracy, and triple bearings for the lathe spindle, threads in mm, inches and diametrical pitch. The year of manufacture is estimated. Many accessories! Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1975, turning diameter over bed 380 mm turning diameter over slide rest 215 mm turning length 1250 mm spindle bore 41 mm bed width 340 mm number of spindle speeds 12 spindle turning speed range 14-2800 U/min total power requirement 6 kW weight of the machine ca. 1,85 t Duolhcceycxf Aeqlsn dimensions of the machine ca. 3 x 1 x 1,35 m Special price sale directly from the factory! Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2026, 0330 mm 210 mm 0635 mm 167 mm 40 mm 2,2 kW Duolhcsyh Rn Recqlsn spindle turning speed - stepless 30-3000 U/min

Condition: used, Year of construction: 2015, Technical details: turning diameter over bed: 420 mm turning diameter over support: 255 mm turning length: 1000 mm turning dia. in gap: 580 mm Dslhccevaxi Ejqljun centre height: 205 mm spindle bore of work spindle: 52 mm range of revolution per miute: 30 - 550 / 550 - 3000 (FU gesteuert) / 2 step U/min feed:: längs: 0,05 - 1,7 mm/U feed:: plan: 0,025 - 0,85 mm/U tailstock quill taper MT: 4 tailstock quill adjustment:: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,5 t dimension machine xH: 2,1 x 1,1 x 1,5 m Thread cutting possible, e.g. metric thread and inch thread Infinitely variable speed control 3-axis position indicator 3-jaw chuck Ø 200mm Multifix size B quick-change tool holder *

Condition: good (used), functionality: fully functional, spindle bore: 103 mm, turning diameter over bed slide: 740 mm, center height: 370 mm, turning length: 1,500 mm, Incl. accessories, see photos. 3-jaw chuck 315 mm, fixed steady rest, digital readout, etc. Specifications: Manufacturer: Merli, Model: Clovis 28, Condition: Used, Stock number: 00413, Max. turning diameter over bed: 740 mm, Max. turning length between centers: 1500 mm, Spindle bore: 103 mm, Spindle mount: Camlock, Tool holder type: Multifix, Connection voltage: 400 V DC, Coolant system: Yes, Digital readout: Yes, 2 axes. Dolhcsyh Hcwjcqlsun

Condition: good (used), Year of construction: 1982, Used small lathe from TOS Type: SM 16 A Max turning diameter: 220 mm Turning diameter over bed: 110 mm Duslhccqsyh Haiolen Chuck diameter: 150 mm Spindle bore: 35 mm Max turning length: 450 mm 2-axis digital readout

Condition: as good as new (ex-display), Year of construction: 2025, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swivel diameter over cross slide 270 mm Swivel diameter in the bed bridge 690 mm Bed bridge length 240 mm Dujlhccqjxbzqqelsn Spindle bore diameter 58 mm Spindle face CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kg Machine dimensions 2700 x 1080 x 1370 mm Accessories - 3 axis DRO - 3 jaw chuck - 4 jaw chuck - Faceplate - Tailstock - Cooling unit - 4-.fold toolholder - Splash guard - Chuck protection - Manual The lathe is in factory brand new condition. Showroom model. It is with 12 months of warranty in Hungary.

Condition: as good as new (ex-display), Year of construction: 2025, Max. over bed diameter: 330 mm Max. swing diameter without bed bridge: 476 mm Max. swing diameter over cross slide: 198 mm Center height: 165 mm Turning length: 500 mm Spindle end: D1-4/DIN55029 Spindle bore: D38 mm Can be cut threads: Metric, Whitworth, Module Spindle speed: 70 – 2000 rpm Tailstock taper: Morse 3 Motor power: 1.1/1.5 kW Machine weight: 500 kg Djloxb Axcehccqljun Machine dimensions: 1320 x 610 x 1400 mm Accessories, Equipment - 3-jaw D160 mm chuck - 4-jaw D200 mm chuck - 4-station tool post - Electromechanical spindle brake - Follow and stationary steady rest - Coolant system - Halogen work light - Feed guard - Splash guard - Manuals The machine is in brand new condition. Operating hours are 0. Showroom machine.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Swing dia over bed 400 mm Swing dia over crosss slide 220 mm Between centers 1500 mm Spindle hole 50 mm Spindle speed 12,5 – 3150 rpm Spindle power 5,5 kW Power required 16 kVA Dimensions L x W x H = 2900 x 1000 x 2200 mm Weight cca 1600 kgs Dslhcsxiymtocqljun Accessories, features - 3 jaws chuck, D200 mm chuck - 4-fold tool holder - Tailstock - Display motor load - Rapid speed - Driwing system by clutch - Spindle break - Splash wall - Hardened and ground linear guides are in perfect condition - Steady rest - Coolant unit - Manual The machine is in great and original technical condition. It was barely used. No DRO system on it.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Swing dia ober bed 505 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Center distance 1000 mm Bed width 340 mm Spindle bore D77 mm Spindle power 7,5 kW Spindle speed 12,5 - 2000 rpm Tailstock taper MT5 Weight 2300 kgs Dimensions LxWxH = 2600 x 1100 x 1525 mm Accessories: - 3 axis DRO - Multifix tool holder set - Halogen machine lamp - 3 jaws chuck - Face plate Dujlhcjxtwvmjcqlsn - Steady rest - Coolant tank - and more other accessories

Condition: new, Year of construction: 2025, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Length of bridge 357 mm Center high 250 mm Center distance 1000 mm Width of bed 340 mm Max weigth of wpc. 300 kgs Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 2550 x 1100 x 1500 mm Duslhjwwt I Njccqlon Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide - Steady rest - Travelling rest - Center - Reduction adapter for main spindle - Tailstock - Coolant unit - 4-fold toolholder - Machine lamp - Rapid speed on long, and cross slides - CE marking - Manuals

Condition: new, Year of construction: 2025, functionality: fully functional, Swing over bed: 660 mm Swing over cross slide: 420 mm Swing at offset: 870 mm Between centers 2000 mm Spindle bore: 103 mm Speed: 36 - 1600 rpm Spindle power: 7.5 kW Weight: 3200 kgs Dimensions (L x W x H) = 3635 x 1050 x 1450 mm Equipment, accessories - 3-axis DRO system - Steady rest - Travelling rest - 3-jaws chuck, 315 mm diameter Duolhccswwt Szeqlon - 4-jaws chuck, 500 mm diameter - Face plate - Rapid traverse on all axes - Coolant system - Chuck guard - Splash guard - Foot brake - Low work lighting - Manual

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Max. swing dia. over bed 356 mm Max. swind dia. without swivel bed bridge 506 mm Center height 180 mm Max turning diameter over cross slide 220 mm Max. turning length 1000 mm Spindle face D1-4/DIN55029 Spindle bore 38 mm Threads that can be cut Metric, Withworth, Module, Spindle speed 45 – 1800 rpm Tailstock taper Morse 3 Tailstock sleeve travel 120 mm Motor power 2.4 kW Machine weight 900 kg Machine dimensions 1945 x 785 x 1204 mm Accessories - 3-jaw D160 mm chuck - 4-jaw D200 mm chuck - Face plate D320 mm - 3 axis DRO - Electromechanical spindle brake - Steady and travelling rests - Center - Coolant unit - Halogen work lamp Dslhexbz Eboccqljun - Splash guard - Chuck protection - Tool post protection - Manual Brand new center lathe with zero working hours. Showroom model.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Center height 210 mm Swing diameter over bed: 420 mm Swing diameter in bed bridge: 580 mm Swing diameter over cross slide: 250 mm Center distance: 1000 mm Spindle nose: D1-6 Speed: 45 – 1800 rpm (16 steps) Spindle bore: 52 mm Feed length: 0.05 – 1.7 mm/revolution (17 steps) Cross feed: 0.025 – 0.85 mm/revolution (17 steps) Metric threads: 0.2 – 14 mm (39 steps) Whitworth: 2 – 72 TPI (45 degrees) Module thread 0.3 – 3.5 MP, (18 steps) Tailstock sleeve diameter D50 mm Tailstock sleeve travel 120 mm Tailstock taper MT4 Power 3.3 kW/400 V Machine weight 1270 kg Dimensions (L x W x D): 1940 x 850 x 1320 mm Accessories - 3-axis digital measuring system - Steady rest - Traveling steady rest - 3-jaw chuck mounted, D200 mm - 4-jaw chuck D250 mm - Chuck guard with safety switch - Rear splash guard - Tailstock - Cooling water system - Chip tray - Tool holder guard - Longitudinal travel stop - Halogen work light - Emergency stop button - CE marking - Machine documentation Dolhcex Rt Euecqljun The machine is a brand new showroom model and has 0 operating hours. It comes with a 12-month spare parts warranty.

Condition: used, Year of construction: 1971, functionality: fully functional, Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 U/min dimensions: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements Deleyhpdyshccqloun

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm Duslhsyhpc Neccqlon bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: good (used), For Sale CAZENEUVE HB 575 Lathe – 3 Metres Between Centres General Description: Brand: CAZENEUVE (France) Model: HB 575 Type: Heavy-duty / Industrial Lathe Distance between centres: 3,000 mm Applications: Machining of long and cylindrical parts for heavy mechanical engineering, aerospace, energy, manufacturing of large shafts, drums or special components. Technical specifications: Maximum turning diameter: ~575 mm (to be confirmed depending on chuck and tailstock) Maximum length between centres: 3,000 mm Centre height: ~285–300 mm (to be verified on machine) Cross slide travel: ~500–600 mm Chuck: depending on configuration (often 4 or 6 jaws, diameter suited for long parts) WITH 3 STEADY RESTS BT MACHINES PURCHASE & SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS Djlhccqjyhncnsljun

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Dolhcexp Hudocqleun

Condition: ready for operation (used), Center height: 230mm, turning diameter over bed/cross slide: 460mm/270mm, spindle bore: 62mm, distance between centers: 1000mm, threading range inch: 4-80 TPI. The machine has been retrofitted with a digital display. An on-site inspection is possible. Djlew U Uaajhccqlsun

Condition: ready for operation (used), Distance between centers: 500mm, center height: 140mm, turning diameter over bed/cross slide: 295mm/155mm, spindle bore: 36mm, speed: 3550rpm, tailstock taper: MK3. Machine dimensions X/Y/Z: approx. 1500mm/800mm/1250mm, weight: approx. 700kg. On site inspection is possible. Dolhccox Hz Rqeqlsun

Year of construction: 1987, condition: ready for operation (used), A conventional lead and feed screw lathe Nardini is available. Swing over bed/cross slide: 440mm/260mm, turning length: 1380mm, taper cylindricity over 100mm: 0.3mm, roundness: 0.03mm, runout: 0.03mm, squareness over 100mm: 0.05mm. An on-site inspection is possible. Duolhcsxq Eyzjcqlen