Used cycle-controlled lathes with a turning diameter over 599 mm for sale (40)

Condition: used, Year of construction: 1998, turning length 2000 mm 980507 x-axis 7000 mm z-axis 10000 mm 65 mm total power requirement 15 kW weight of the machine ca. 3,5 t Gtjdpfsw Syb Dsx Agbet

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical details swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 weight of the machine ca. 6,5 t Godex Uw Dvopfx Agbstt dimensions of the machine ca. 7400 x 2100 mm Additional information Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Work area enclosure with two sliding doors. Machine length 5700 mm, with swarf converyor 7400 mm Machine width 2100 mm

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l Gtjdox Sw Dwjpfx Agbet incl. tools Machine is under power and can be inspected by arrangement.

Condition: used, Year of construction: 2007, operating hours: 41,000 h, spindle bore: 165 mm, turning length: 3,000 mm, turning diameter: 830 mm, turning diameter over bed slide: 1,200 mm, quill stroke: 400 mm, quill diameter: 140 mm, torque: 8,000 Nm, Technical Specifications ----- Max. turning length: 3,000 mm Turning diameter: 830 mm Max. turning diameter over bed: 1,200 mm Bed width: 600 mm Spindle bore: 165 mm Spindle head DIN 55027 Gr 15 Chuck: Forkardt 3KS 800 mm Speed range: 1 - 280 / 4 - 900 rpm Gear ratios: 2 Torque: 8,000 Nm Gsdpfx Ajv Nhxzjgbott Number of turrets: 1 Sauter 4-station head turret for 140 mm chucks Tailstock Quill diameter: 140 mm Quill stroke: 400 Features ----- Electronic handwheel Forkardt 3KS 800 mm hydraulic power chuck Chip conveyor

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2042.6958-01, quill diameter: 160 mm, overall weight: 8,000 kg, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, distance between centers: 3,000 mm, VDF lathe type 800 DUS in very good condition. Specifications: Heidenhain Manual Plus 620 control Speed 6-1600 rpm (2 steps) Gtjdex S Nv Sspfx Agbet Swing over bed 800 mm Spindle bore 128 mm Distance between centers 3000 mm Spindle mounting DIN 55027 No. 11 Year of manufacture 2017 Dimensions 6,320 mm (including chip conveyor + 1,200 mm) 2,930 x 2,440 mm Weight 8,000 kg Accessories: Heidenhain Manual Plus 620 control Steady rest 250-500 mm 4-jaw chuck 700 mm 4-jaw chuck 450 mm 3-jaw chuck 315 mm Parrat tool holder with 4 holders

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, spindle bore: 140 mm, turning length: 3,000 mm, turning diameter: 630 mm, center width: 3,000 mm, turning diameter over bed slide: 380 mm, Universal lathe machine after general overhaul. Gtodpfx Aged Eafdobet

Condition: used, Year of construction: 1999, control Heidenhain centre distance 1400 mm weight of the machine ca. 3,6 t Handwheel defective Gedpew Syd Sjfx Agbott

Condition: used, Year of construction: 2003, Technical details: turning diameter: 630 mm turning length: 2000 mm swing diameter over bed slide: 350 mm upper slide-adjustment: 195 mm bed width: 550 mm spindle diameter in front bearing: 120 mm Gjdpfx Agjvb Dt Ssbott spindle drive: 17/25 kW spindle bore: 71 mm spindle turning speed range: 3 - 1800 U/min tailstock-quill taper dia./stroke: 110/210 mm total power requirement: 30 kW dimensions of the machine ca.: 4,9 x 2,1 x 2,0 m weight of the machine ca.: 5 t Machine with Monforts System Euro Turn control - quick tool change device MULTIFIX - 3-jaw chuck - coolant device - chip conveyor *

Condition: used, Year of construction: 1994, Technical details: Gjdpfx Agowwluzjbjtt turning diameter: 570 mm turning length: 1000 mm dimensions of the machine ca.: 3,25 x 2,03 x 1,95 m Tool disc turret for 8 tools with VDI 30. Not for power tools machine manual, technical documentation; Accessories: 3-jaw chuck, various tool holders Video is available *

Condition: ready for operation (used), Year of construction: 1984, turning diameter over cross slide: 700 mm, spindle bore: 150 mm, turning length: 3,000 mm, turning diameter: 1,000 mm, capacity 3000x1000 mm, spindle bore 150 mm, steady rests, 4-jaw chuck Gtsdpfx Asx Itpbegbst

Condition: used, Year of construction: 2002, turning diameter 570 mm turning length 3000 mm control SIN 810 D Gtedpfxsx I Sdqo Agbot turning diameter over slide rest 345 mm spindle head DIN 55027 - Size 8 spindle bore 62 mm tailstock quill taper MT 5 spindle turning speed range 3 - 2.500 U/min total power requirement 35 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 7,50 x 2,10 x 2,00 m ManualTurn Version: V05.03.09 4-station turret SAUTER with various cartridges 3-jaw Schunk SCHUNK ROTA-S plus 2.0 Ø315-92 Tailstock Drill rod bore 100mm Fixed steady rest Ø315mm Chip conveyor bmf Bürener (new in 2025) with coolant pump Machine light

Condition: used, total height: 2,500 mm, total length: 5,000 mm, total width: 2,200 mm, Empty weight: 5.500 kg Price: On request - Documentation available: Yes - └ Type Documentation: Maintenance history, Electrical diagrams, Technical data, User manual - └ Language: DE, EN - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: No - Serial number: 12598 - Drive system: Teach-in - Control system brand: Fagor - Control system type: 8055 - Power [kW]: 15.0 - Centre height [mm]: 350 Gtjdpfx Agownhm Isbet - Swing over bed [mm]: 700 - Carriage turning diameter [mm]: 425 - Distance between centres [mm]: 2000 - Bed width [mm]: 450 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 310 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout, Removable bed - Type of digital readout: Heidenhain Manualplus - Control: CNC - Transport dimensions: 5000mm x 2200mm x 2500mm (l x w x h) - Transport weight [kg]: 5500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm turning length: 3000 mm face slide travel: 600 mm Gedpfor U Skhjx Agbett turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 power chuck, tailstock, chipconveyor *

Condition: used, Year of construction: 1998, Technical details: Gjdpfxjwwlt Rs Agbett turning diameter: 830 mm turning length: 4000 mm turning diameter over bed slide: 540 mm spindle bore: 130 mm turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 55 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment *

Condition: excellent (used), Year of construction: 2010, Swing over bed 710 mm Center height 350 mm Distance between centers 3000 mm C-axis +/- 0.05° Spindle speeds 2-1850 rpm Gsdpfxjx A Exbs Agbstt Control: SIEMENS 840D Shop Turn Chip conveyor Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1985, Heavy duty lathe SN1250X10000 as follows: Manufacturer: 1MAI PLOIESTI (Romania) Year of manufacture: 1985 Main technical data: • Face plate diameter: 1250 mm • Max. swing over bed: 1250 mm • Max. swing over slide: 970 mm • Height of centers: 625 mm • Distance between centers: 10,000 mm • Max. weight of the workpiece: 16 t • Speed range of the main spindle: 0.8 – 160 rpm • Main drive motor: 75 kW Gtsdpfoxygdyex Agbjt • Longitudinal feed: 0.4 – 480 mm/min • Transversal feed: 0.2 – 240 mm/min • Intermediate slide feed: 0.15 – 180 mm/min • Intermediate slide travel: 500 mm • Cross slide travel: 520 mm • Tool holder travel: 175 mm • Machine weight: approx. 29,000 kg Accessories: - 4-jaw face plate - 5 steady rests The lathe is in good condition. For more details please contact us.

Condition: used, Year of construction: 1996, turning diameter over bed 710 mm turning dia. over face-slide 420 mm turning length 2000 mm control Manual Plus 3110 Heidenhain spindle bore 92 mm main spindle speeds: 16 - 1800 U/min cross movement 385 mm spindle head DIN 55027 - Size 11 spindle diameter in front bearing 140 mm power capacity at 100 % load 22,00 kW 2750 Nm feed x/z-axis 1 - 5000 mm/min Gtjdpfxoxxmiye Agbst rapid traverse X-axis 6,00 m/min rapid traverse Z-axis 8,00 m/min tailstock quill taper MT 5 quill stroke 210 mm diameter of quill 110 mm total power requirement 40,00 kW weight of the machine ca. 5,60 t dimensions of the machine ca. 5,00 x 3,00 x H2,50 m

Condition: used, Year of construction: 2003, functionality: fully functional, For sale: ROMI M680 CNC lathe from 2003, equipped with Fanuc control. The machine comes from an operating workshop and is fully mechanically functional and ready for work. It shows normal signs of use consistent with its age, which do not affect its performance. The Z-axis leadscrew has been replaced, ensuring smooth and precise axis movement. The machine may look “workshop-used” visually, but mechanically it is in very good condition. Complete equipment and tooling as shown in the photos. Technical data: Manufacturer: ROMI Model: M680 Year of manufacture: 2003 Control: Fanuc Swing over bed: approx. 680 mm Maximum turning length: approx. 2000 mm Spindle bore diameter: approx. 105 mm Spindle speed range: up to 1800 rpm Machine weight: approx. 6,300 kg Power supply: 400 V / 50 Hz Technical condition: Gtsdpfx Agjx Avz Tebet Fully operational machine – in continuous use, testing on site available. Z-axis leadscrew replaced – smooth, backlash-free movement. Fanuc control fully functional, no errors. Normal signs of use and typical workshop dirt. Mechanically in good condition. Machine ready for immediate operation, technically sound. Robust ROMI construction – excellent stability for heavy-duty machining. Low maintenance costs, readily available spare parts. Fanuc control – intuitive, reliable, and easy to service. Ideal for workshops needing a versatile lathe with a large turning capacity. Feel free to contact me. The machine can be inspected upon prior arrangement. Unloading, loading, and assistance with transport organization are available.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2311151630, turning diameter over cross slide: 650 mm, spindle bore: 153 mm, turning length: 3,150 mm, turning diameter: 650 mm, turning diameter over bed slide: 650 mm, turning diameter over top slide: 410 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed length X-axis: 330 mm, feed length Z-axis: 3,150 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 6,261 mm, total width: 3,588 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 18,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 230 V, drill spindle diameter: 153 mm, nominal power (apparent): 21 kVA, number of spindles: 1, spindle nose: A2-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 149,500.00!!!!! The machine is new and immediately available. Subject to prior sale. Including hinged belt chip conveyor. Delivery of the machine in export packaging ex our warehouse. (Shipping costs to be borne by the buyer) Operating fluids to be supplied by the buyer. Commissioning and training by Milltronics possible. Leasing available (subject to credit approval) Machine details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automated processes • Custom macros available • Override potentiometer for axes and spindle • Spindle load monitoring Gtsdpfxjx Akm Rj Agbjt • Key switch to lock the EDIT function • Indicator lights for operating status • Additional "M" function with CNC dwell channel • Constant cutting speed • Rigid tapping • Spindle speed 30 - 1600 rpm • Spindle motor 18 / 11 kW, 2-speed electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 stations, 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One boring bar holder 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list, and wiring diagrams in digital format • Operation and maintenance manuals in digital format • Transformer for standard industrial power, 400 volts, 3-phase • Lifting brackets for craning the machine Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in conjunction with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic power unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Follow steady rest with brass supports, range 20 mm – 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Floor mat with Milltronics logo

Condition: used, Year of construction: 2000, Technical details: turning diameter: 800 mm turning length: 2965 mm max. turning dia. over saddle: 520 mm spindle bore: 92 mm turning speed range: 3 - 1800 U/min spindle head: Größe 11 total power requirement: 37 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,2 x 2,2 x 1,9 m Teach In Control MTC-K 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT 1 fixed steady Gedexxig Uspfx Agbett coolant attachment and chip conveyor *

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 220-15, turning diameter over cross slide: 290 mm, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 500 mm, quill diameter: 80 mm, quill travel distance: 160 mm, center height: 255 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (min.): 2 rpm, spindle speed (max.): 2,800 rpm, feed length Z-axis: 1,500 mm, bed width: 360 mm, total length: 3,330 mm, total width: 1,550 mm, total height: 1,790 mm, mount diameter: 300 mm, type of input current: three-phase, spindle motor power: 15,000 W, travel distance cross slide: 265 mm, overall weight: 3,300 kg, rotational speed (min.): 2 rpm, rotational speed (max.): 2,800 rpm, three-jaw chuck diameter: 250 mm, workpiece length between centers: 1,500 mm, chuck outer diameter: 250 mm, The machine is ready for immediate operation. The axis module and main spindle module were replaced in 01/2024 with completely overhauled modules, and all cables from the bed slide to the operator panel were replaced. The machine guideways are in good condition and fits in the H-5 tolerance range are not an issue. Included accessories: original steady rest, Röm 250 wedge-bar three-jaw chuck, and Multifix tool changer size C. Gtsdoxzzluspfx Agbot

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Lathe - cycle controled / Brand: SEIGER / Type: SLZ-1200 S x 8000 Year of manufacturing: 08/2000 Gsdjxvmygspfx Agbjtt The machine can be inspected by appointment under power. TECHNICAL DATA: Working area: - Peak width: 8.000 mm - Swing diameter over bed rail: 1.250 mm - Bed width: 900 mm Turning spindle: - Spindle head according to DIN 55027, size 15 - Spindle bore: 240 mm - Chuck diameter: 128 mm Permissible workpiece dimensions/weights: - between the tips without / with one steady rest: 5.000 / 7.000 kg - between the tips with with two steady rests: 8.500 kg EQUIPMENT: - CNC-Control: SINUMERIK 810D ManualTurn - 1 x faceplate, diameter: 1.000 mm - 2 x steady rests - 2 x chip conveyors - Documentation - CE marking Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: repair required (used), Year of construction: 1982, Heavy Duty Lathe SN1800X8000 Specifications: Manufacturer: 1MAI PLOIESTI (Romania) Year of Manufacture: 1982 Main Technical Data: • Face plate diameter: 1800 mm • Maximum swing over bed: 1780 mm • Maximum swing over slide: 1450 mm • Centre height: 800 mm • Distance between centres: 8000 mm • Maximum workpiece weight: 16 t • Spindle speed range: 0.8 – 160 rpm • Main drive motor: 55 kW (overhauled) • Longitudinal feed: 0.4 – 480 mm/min • Cross feed: 0.2 – 240 mm/min • Compound slide feed: 0.15 – 180 mm/min • Compound slide travel: 500 mm Gjdpoxrci Nsfx Agbjtt • Cross slide travel: 520 mm • Tool post travel: 175 mm • Machine weight: approx. 31,000 kg Accessories: - 4-jaw face plate - 2 steady rests - Grinding attachment - Milling attachment For further information, please contact us.

Condition: used, Technical details: turning diameter over bed: 830 mm Gjdewmlknspfx Agbott turning dia. over face-slide: 540 mm turning length: 3000 mm turning diameter over support: 540 mm centre distance: 3000 mm faceplate diameter: 800 mm Rapid feed X axis: 4 m/min. control: MTC K (Monforts) range of revolution per miute: 2 -1.600 U/min spindle passage: 88 mm tailstock taper ISO: MK6 tailstock quill stroke: 200 mm max. workpiece weight between centers: 1250 kg max. workpiece weight -without tailstock: 3000 kg turning dia. in gap: 1.200 mm length of gap: 310 mm Weight approx.: ca. 6.85 (ohne Späneförderer und Kühlmittelbehälter) t dimension machine xH: 2,55 x 1,1 x 1,29 m Cycle lathe Machine overhauled in 2010 Operation via control panel Thread cutting by calculation Interpolator of NC control Chip conveyor manufacturer Cable drag Three-jaw chuck D=500mm without clamping jaws Various accessories *

Year of construction: 1997, condition: excellent (used), PBR T35SNC x 3000 cycle turning machine Year of manufacture: 1997 Control: Fagor Center distance: 3000 mm Max. turning diameter: 630 mm Center height over bed: 300 mm Gtodpfxeil Hzzj Agbst center height over slide: 165 mm spindle bore: 105 mm Rotational speed: 2000 rpm weight: 6200 kg Accessories incl: Multifix set (without steels), chuck (See photos) + additional chuck. No responsibility is taken for the accuracy, completeness and timeliness of the information.