Used Mechanical Lathe for sale (10,310)

Condition: ready for operation (used), Year of construction: 1979, functionality: limited functionality, spindle bore: 90 mm, overall weight: 8,500 kg, turning diameter: 800 mm, total length: 3,500 mm, Universal lathe, in working condition, although some feed mechanisms are not functioning; sold with the accessories shown in the photo (centers, faceplate, chucks). It has an 800mm swing over the bed, but the front section of the bed is removable to allow for a 1000mm swing; it can accommodate a shaft up to 3500mm in length. The headstock can accept a spindle with a 90mm diameter. Cgsdsy Idbnepfx Ak Est

Condition: excellent (used), Year of construction: 1967, Swing over bed: 800mm Swing over support: 450mm Turning length: 2800mm Workpiece weight: 5000kg Codpfx Ajy Iai Ujk Eogt

Condition: used, Mechanic's Lathe SCHAUBLIN Type 102 Mach. No. 1998 Centre distance: 350 mm Bed length overall from headstock: 635 mm Swing over bed: 200 mm Centre height over bed: 102 mm Swing over cross slide: 120 mm Centre height over cross slide: 61 mm Spindle bore: 18/20 mm Spindle speed, gear stage 1: approx. 120 / 190 / 320 rpm Spindle speed, gear stage 2: approx. 590 / 970 / 1500 rpm Chuck mounting: external thread M38 x 3 mm Tailstock taper: MT 1 Drive motor: 0.55 kW, 920 rpm Power supply: 380 Volt, 50 Hz - Spindle speeds adjustable via 2 gearbox stages and 3-step drive belt shifting - Main spindle with forward and reverse operation - Spindle mount with M38 x 3 mm thread - 3-jaw scroll chuck Ø 128 mm with stepped jaws - Collet clamping system with 6 round collets Ø 3 / 4 / 5 / 6 / 8 / 20 mm - Integrated dividing plate on main spindle with 48 / 60 / 100 holes - Toolholder slot approx. 10 x 18 mm with clamping screw - Sturdy wooden base with 42 mm laminated board Required space (with stand): L x W x H: 1160 x 750 x 1300 mm Weight with stand: 150 kg Good condition Cgsdpfx Ajy Dvf Rsk Ejt

Condition: used, functionality: fully functional, Engine lathe, manufacturer WEILER Technical data: Distance between centers approx. 500 mm Center height above bed: 125 mm Infinitely variable spindle speeds: Range 1: from 160 – 900 rpm Range 2: from 320 – 1800 rpm Cgjdsyzrnpepfx Ak Eet

Condition: used, functionality: fully functional, Technical data: Distance between centers approx.: 500 mm Center height over bed: 125 mm 16 spindle speeds Range 1: from 110 – 900 rpm Range 2: from 440 – 3600 rpm Cgedpfx Aeyzggask Eet Space requirement, length x width: 1.2 x 0.6 m Estimated weight approx.: 400 kg

Condition: used, L + Z Lathe WEILER Model Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centers distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and cross Chuck mounting: Short taper DIN 55027 size 5, 4x M10 Tailstock taper: MT 3 Codeyg Rfijpfx Ak Eogt Tailstock quill travel: 90 mm Spindle speed: 42 – 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX quick-change toolpost size A with 3 exchangeable toolholders - Live center - Emergency stop - Folding chuck guard - Coolant system - Operating manual with electrical schematic - Very low operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox Csdpfx Ajyah Rvok Eogt - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: good (used), Used Pinacho L1-260 lathe Csdpoudw Iiefx Ak Esgt Distance between points: 1625 mm Max. turning on bed: 520 mm Length of neckline: 350 mm Tilting on longitudinal carriage: 470 mm Turning on the transversal carriage: 320 mm Swing in dive: 770 mm Reed pitch: 68 mm Main engine power: 7.5 hp *It will be delivered with 3-jaw chuck. *Price can be requested with or without CE regulations.

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3315 Year of manufacture: 1984 Center distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and face Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gearbox steps - 3-jaw scroll chuck RÖHM ZS Ø 160 mm with 1 set of stepped jaws - MULTIFIX quick-change tool post size A with 3 tool holders - Emergency stop - Hinged chuck guard Cgedjyr R Dcspfx Ak Eet - Operating manual with electrical diagram Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 560 kg Good condition

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Codpfjw Iq Umsx Ak Eegt Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Center height over bed: 102 mm Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: excellent (used), Technical details Swing diameter over cross slide: 940 mm Turning diameter: 1,260 mm Speed (min.): 8 rpm Speed (max.): 900 rpm Overall height: 1,800 mm Overall length: 3,500 mm Overall width: 2,440 mm Three-jaw chuck diameter: 500 mm Centre distance: 3,500 mm Offer details VDF Wohlenberg V1180 Centre distance: 3,500 mm 3.5 - 710 rpm 71 - 900 rpm Chuck: 500 mm diameter Cjdpsyr Sx Ijfx Ak Esgt

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine just arrived and will be cleaned soon. turning diameter over bed: 400mm distance between centers: 1000mm spindle size: 50 mm chuck size 200mm Csdjyh Ndwspfx Ak Ejgt speed range 40 rpm to 2000 rpm machine weight: 1700kg including 3 jaw chuck and tool holder

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2552 Year of manufacture: 1983 Cgedpfx Akjykca He Est Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MK 4 Motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle speed via 12 gearbox steps - EMCO 3-jaw scroll chuck Ø 200 mm with turning and boring jaws - Multifix size B quick-change tool post with 3 change cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Condition: used, functionality: fully functional, EMCO Compact 8 Lathe, used 230 V 650 W motor Center distance: 450 mm Center height: 105 mm Spindle bore: 20 mm Codpfx Aeymnkvsk Ejgt Spindle speed: 100 - 1700 rpm Movable tailstock MK2 Automatic longitudinal feed Thread cutting Tool post with multiple attachments Emco 3-jaw chuck 110 mm TOS 4-jaw chuck 125 mm 200 mm chuck Rotating center Röhm keyless drill chuck 3-16 mm Technical specifications Approximate onsite dimensions (L 950 x 520 x 340 mm x W x H) Weight approx.: 75 kg

Condition: good (used), Year of construction: 1979, Center height: 120 mm Center width: 450 mm spindle opening/boring: 23 mm board width: 100 mm Speeds: (12) 180 - 2240 min-1 travel top slide: 140 mm tailstock mount: MK 2 quill stroke: 80 mm motor power: 2,5 kW connection: 400 V dimensions approx.: 1300 x 880 x 1250 mm Weight approx.: 600 kg Equipment: Punching device Codeip Nczjpfx Ak Eegt quick change holder system Multifix, size Aa Machine light Coolant device

Condition: excellent (used), Year of construction: 1998, total length: 7,500 mm, We offer this Cazeneuve HB725 mechanical lathe in very good condition, year of manufacture 1998. Codpfx Asyag Nqjk Eogt Manufacturer: Cazeneuve Model: HB725 Year of manufacture: 1998 Machine type: Mechanical lathe Country of origin: France If you have any questions or need additional information, please send us a message or give us a call.

Condition: reconditioned (used), Year of construction: 1977, Engine Lathe Brand: WEILER Model: MDU 260 Year of manufacture: 1977 – workshop tested Machine no.: 14942 Centre height: 125 mm Spindle bore: 28 mm Accessories: - Electrically operated chuck guard - 3-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - 4-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - Safety chuck key - Manual clamping device - Collet set W28 (366E) Codpfxjxv A I Te Ak Eogt - Set (25 pcs.) collets W28 (366E) from 1.0-25.0 mm in 1.0 mm steps - Fixed centre for headstock W28 (366E) - Quick-change toolholder Body size A - Operating manual Used as seen, without warranty The machine is technically in accordance with the state of the art of its year of manufacture.

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe 2000mm swing over bed Cgodpfsx Hp Iwsx Ak Eot 1500mm swing over saddle 8,000mm between centres Main drive 60kW, 40 ton load capacity Spindle speeds 2 – 152 rpm Steadies 2000mm Bed extension

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock Cedpew Dvv Asfx Ak Eegt - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Codou Axzkjpfx Ak Eegt Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: like new (used), Year of construction: 2023, GM – DC330MINI V4 Label Converter Year of Manufacture: 12/2022 _____ Machine Specifications and Equipment:  Max Webwidth: 330mm  Speed up to 65 m/min, semi rotary; 72 m/min full rotary  Unwinding max. 700 mm  Rewinding max. 450mm  Touch screen  Flexo Unit Corona  Webedge Control  Semi-rotary die cutting  Automatic register check  GEW – UV  Lamination  GM SmartCrush Cgedpfx Asv Aa Twek Est _____

Condition: used, This Listing is for a GEA Mechanical Equipment PandaPLUS 2000 Homogenizer. The unit is in full working condition and is ready for immediate release. The GEA PandaPLUS 2000 Homogenizer is a cutting-edge, high-pressure laboratory homogenizer designed for precision, efficiency, and reliability. Ideal for industries including food and dairy, pharmaceuticals, chemicals, and biotechnology, this compact unit delivers exceptional performance for small-scale and pilot-scale applications. Key Features: - High-Pressure Operation: - Capable of operating at up to 2,000 bar, the PandaPLUS 2000 is perfect for processing nanoparticles, nanoemulsions, nanodispersions, and cell disruption, ensuring uniform and stable results. - Efficient Sample Handling: - With a minimum sample volume of just 30 mL, it enables accurate testing with minimal waste, making it ideal for laboratory use. - Impressive Flow Rate: - Achieves a maximum flow rate of 10.8 L/h, delivering consistent results for both laboratory and pilot-scale operations. - Powerful Motor: - Equipped with a 1.85 kW motor, the homogenizer supports multiple electrical configurations, including: - 3Φ 200 V, 50 Hz - 3Φ 220 V, 50-60 Hz - 3Φ 400 V, 50-60 Hz - 3Φ 460 V, 60 Hz - Compact and Portable Design: - Measuring 810 x 540 x 440 mm and weighing 105 kg, the PandaPLUS 2000 is easy to integrate into laboratory environments without occupying excessive space. - Adjustable Pressure: - Offers manual pressure adjustment via a valve during operation, allowing for precise control over processing parameters. - High Production Rate: - Achieves a production rate of 9,000 or 7,500 units, depending on the specific application, ensuring efficiency and scalability. Applications: The PandaPLUS 2000 is a versatile solution for a variety of applications: - Food & Dairy: Create stable nanoemulsions for enhanced texture and flavour. - Pharmaceuticals: Produce bioavailable formulations with consistent particle size. - Chemical Industry: Develop uniform nanodispersions for advanced materials. - Biotechnology: Facilitate effective cell disruption for downstream processes. Cgodpfxey Iw Ege Ak Est 📞 Contact us today to learn more or request a quote!

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Codpfey D E Rijx Ak Esgt Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: good (used), Toolholders bought in company where used for Biglia machine Cedpfx Ajyuyhiek Ejgt

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm Cgodjxdmgvjpfx Ak Eot CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm