Used Used Wood Lathe for sale (68,375)

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 4/0001/09472, MACHINE SPECIFICATION Distance between centres 635mm Centre height 165mm Swing Swing over bed 335mm Swing over cross slide 209mm Spindle Bored to pass 40mm dia Nose D1-4 Camlock Morse taper in nose N0 3 Width of bedways 231mm Travel Total travel of cross slide 209mm Total travel of top slide 95mm Total travel of tailstock barrel 146mm Speeds Spindle speeds (16) 22-1800rpm Spindle motor 2.25kW MACHINE SPECIFICATION Cont’d Whitworth threads (45) 2-72tpi Diametral threads (21) 8-44 Metric pitches (39) 0.2-14.0mm Module pitches (18) 0.3-3.5 Feeds Sliding feeds 0.001-0.040 ipr/spindle Surfacing feeds 0.0005-0.020 ipr/spindle Tailstock Approx weight 800Kg Machine in Imperial execution MACHINE EQUIPPED WITH 3 jaw chuck Quick change toolpost and 6 off toolholders Ainjest high speed screwcutting attachment Single bedstop 5 Position turret bedstop Hjdpfsxn Iv Tox Afijfn Apron dial Chuck guard Coolant system Rear splashguard

Condition: used, Double edger EG100, year of manufacture 2022, very good condition, max. board thickness 50 mm, max. edge width 300 mm, 7.5 kW, 2 knives Hsdpevr I Ihofx Afijfn Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVT50 GMRJA/04069, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800kg Machine in Metric execution   MACHINE EQUIPPED WITH Newall 2 Axis Digital Readout System 3 Jaw Chuck Quick change Toolpost Ainjest high speed screwcutting attachment Chuck Guard Hjdpfsxldidex Afijfn Lighting Coolant System Rear Splashguard

Condition: used, Woodmizer EG100 double edger, year of manufacture 2019, standard equipment, 8 kW, 2 saw blades, 512 kg Hfedpfevrvk Rex Afien Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 6V0146, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Hodpfxjwmm S Te Afiefn Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex display Dyson apprentice training facility, in excellent condition

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: T40065, MACHINE SPECIFICATION Maximum swing 510mm Maximum turned diameter 290mm Maximum turning length 540mm Bed inclination 60 degrees Spindle centre height (from floor) 960mm Spindle nose A2-6 Power chucking system Hydraulic Spindle bore 77.5mm Bar capacity - collet 66mm Maximum spindle speed 5000rpm Spindle motor power 22kW Hfjdpfx Afoq Atxyeion Rapid travers : Z/X Axis 30/25m/min Turret: Tooling type VDI 40 Number of tooling stations 12 Number of driven tool stations 6 Maximum rpm of driven tool 4000rpm Maximum power of driven tool 3.7kW Maximum collet size of driven tool 20mm C axis increment: Fully programmable 0.001 degrees Approximate net weight 4550Kg Machine Equipped with Fanuc 21i-T CNC Control System Hydraulic 3 jaw chuck 3 off Radial driven toolholders 3 off Axial driven toolholders 30 off Static toolholders Coolant system Lighting Interlocked guarding  

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6V0148, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Hsdpfewmm H Rjx Afijfn Rear splashguard NB Machine ex Dyson apprentice training facility, in excellent condition

Condition: used, Year of construction: 2003, Max. Swing – 675mm Swing over carriage – 350 mm Max. Machining dia. – 380 mm Max. Machining lenght – 538 mm X-axis travel – 230 mm Z-axis travel – 575 mm Spindle - Chuck size – 8” Spindle speed – 5000 rpm Turret w/12 stations Hjdpfx Asv Rnuxjfiefn Control: Mazatrol PC Fusion 640 T Equipped with: Barfeeder LNS Eco Load

Condition: excellent (used), Automatic lathe Locatelli Ariete 3 Hfsdexhbyxspfx Afisn Length of the cant max/min 1000/200mm Dimensions of the cant max/min 85×85/20x20mm Maximum length of the processed material 120mm with a hole 150mm without a hole Automatic material feeder CE certificate Complete DTR documentation Main engine with a power of 3/4kw Two spindle speeds 2500/3600rpm Oil pump engine 2.2kw Working pressure 6-8bar

Condition: excellent (used), For sale: Genini brand lathe in very good condition Hodpjxf Nyusfx Afiofn

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,500 h, functionality: fully functional, spindle speed (max.): 5,400 rpm, Mebor SB 420 lathe for producing round logs for log cabins. The Mebor SB 420 milling machine is designed for processing logs used in the production of wooden houses, playgrounds, etc. The machine performs five operations: roughing, finishing, cutting longitudinal and transverse grooves (sockets), and drilling holes in logs, enabling the combination of five operations in one machine. After processing, the log is smooth, with all necessary grooves and boreholes, ready for construction. Hfedsvzhv Rjpfx Afion The machine tool is equipped with a belt for ejection of sawdust and waste.

Condition: used, Year of construction: 1988, Distance between centres 1200 mm Hfodek Sat Dspfx Afion Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min weight 2,2 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Reference: LT-2501 Manufacturer: Okuma Model: LB4000EX-MC x 750 CNC Control: Okuma OSP-P200L Year of Manufacture: 2007 Keyboard/Software Language: International / Spanish Country of Origin: Japan Technical Specifications: Capacity: Maximum swing over bed: Ø 670 mm Maximum swing over carriage: Ø 480 mm Distance between centers: 770 mm Maximum turning diameter: Ø 430 mm Maximum turning length: 750 mm Maximum bar capacity: Ø 90 mm (requires modification) Main Spindle: Spindle diameter: Ø 160 mm Spindle nose (type): JIS A2-11 Spindle bore: Ø 112 mm Speed ranges: 2, infinitely variable Spindle speed: 30 – 3,000 rpm Motor: 37 / 30 kW (30 min / continuous) Motor type: PREX Motor Hodow Dvb Sopfx Afijfn Tailstock: Rotating center: MT 5 Travel (W axis): 780 mm Rapid traverse: 12,000 mm/min Maximum thrust: 7,500 N Z Axis: Travel: 840 mm Cutting feedrate: 0.001 – 1,000.00 mm/rev Rapid traverse: 30,000 mm/min X Axis: Travel: 300 mm Cutting feedrate: 0.001 – 1,000.00 mm/rev Rapid traverse: 25,000 mm/min C Axis: Controlled angle: 360° (0.001° increment) Turret: Type: M-V12 NC Number of tool stations: 12 x BMT40 (L or M) Indexing speed: 0.2 sec/position Tool Dimensions: External turning: 25 x 25 mm Internal turning: Ø 40 mm Driven Tool: Speed: 45 – 6,000 rpm Number of speed ranges: 1, infinitely variable Motor: 7.5 / 4.3 kW (25 min / continuous) Motor type: PREX Motor Dimensions and Weight: Machine height: 1,955 mm Floor space required: 3,050 x 1,900 mm Machine weight: 6,300 kg Included Options: SCHUNK ROTA THW plus 315-104 quick-change chuck (3 jaws, Ø 315 mm) CROMAR chip conveyor Assisted programming (ONE Touch IGF Advanced) Rigid tapping DNC-T1

Condition: used, Swing Diameter Over Bed: 400 mm Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Spindle Bore Diameter: 52 mm Hfjdpfx Asxg Nd Asfijn Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Control: Fanuc 6T Equipped with: See photos

Condition: excellent (used), Locatelli Oriental Matik 1350 lathe component grinder Working length: 1350 mm Two grinding units Six stations for grinding components Hfedpfx Afsxf Thvjijn Minimum grinding length: 220 mm Maximum grinding length: 1350 mm Maximum grinding diameter: 120 mm

Condition: like new (used), Year of construction: 2024, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,907 mm, total length: 5,300 mm, total width: 2,105 mm, type of input current: three-phase, overall weight: 6,900 kg, spindle nose: ASA 11, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​2-axis CNC lathe "DN Solutions model PUMA GT3100L" with DN Solutions-Fanuc i-Plus iHMI CNC complete with chip conveyor, Morari self-centering steady rest with 15-170mm opening, automatic doors, 12-position turret, auto power off and tool life management. Hedowuti Uspfx Afisfn

Condition: new, The new heavy-duty professional lathe from Holzprofi. Body and bed made of solid cast iron, removable bridge, robust bearings, quick-adjust tool rest, 24-position indexing system with detent, tailstock with indexing center. Longitudinal and cross support. Hjdpfx Aswzzdaofijfn 100% Made in EU (designed, built, quality-tested) Technical Data: Centre distance: 1270 mm Centre height: 305 mm or 600 mm Spindle thread: M 45 (M 33) Spindle taper: MK 3 Tailstock taper: MK 3 Quill stroke: 140 mm Spindle speeds: 375/1000/2350/3250 rpm Motor output: 3 kW S6 (2.2 kW S1) Weight: 560 kg Standard equipment: - Hollow spindle - 24-position indexing system - Tool rest 254 mm - Tool rest for discs up to ø1200 mm - Live centre - Four-prong drive centre - Faceplate ø254 mm - Ejector Optional equipment: - Infinitely variable speed - Bed extensions, each 1270 mm - Knurling device - Copying attachment - Steady rests, live steady rests

Condition: good (used), Year of construction: 2003, Hyundai Hit 30M CNC Lathe With Large Amount of Tool Holders and Driven Tooling Package. Driven tooling Simens sinumerik control Kitagawa 12” 3 Jaw chuck B-212 Max Rpm: 3300 Max swing: 580mm Swing on the carriage: 580mm Swing on the cross slide: 400mm Max Cutting Dia: 334mm Max cutting length (shaft): 990mm Standard cutting dia: 290mm Distance between section of main spindle and section of turret: 146-1136mm Max bar work capacity: 90mm Centre height (from ground): 1050mm Max support weight: 1000kg Main spindle nose: ASA A2-8 Main spindle taper: 1/16 Spindle bore: 104 dia Hjdpfx Aewqyhcjfiefn Speed range of main spindle: 25-2500rpm Speed variation range of main spindle: Automatic speed variation Type of turret: VDI turret Number of tools: 12 Index time: 0.52 sec/ 1 step Tool size (outer dia): 25 x 150mm Tool size (inner dia): max 50mm Index coupling dia: 200mm Travel: X axis: 290mm Z axis: 1000mm Rapid traverse X: 18m/min Rapid Traverse Z: 24m/min Bed shape: Flat Bed width: 405mm Full automatic tailstock Tailstock quill stroke: 130mm Tailstock quill dia: 100mm Taper (sleeve): MT No5 Maximum thrust: 10kN Tailstock body stroke: 835mm

Condition: used, Year of construction: 2002, Max. diameter 430 mm Max. length 600 mm Max. spindle speeds 4000 rpm Max. spindle speed on live tools 4000 rpm X/Z travel - 310/605 mm 2 x 12 station turrets Control: Hjdpjxfcbfefx Afijfn Mazatrol PC Fusion 640 T Equipped with: Various toolholders

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 1,270 mm, turning diameter: 1,100 mm, spindle motor power: 55 W, spindle speed (min.): 5 rpm, spindle speed (max.): 850 rpm, travel distance X-axis: 580 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, workpiece weight (max.): 2,000 kg, total height: 4,012 mm, total length: 3,555 mm, chuck outer diameter: 800 mm, total width: 2,850 mm, spindle nose: ASA 15, overall weight: 22,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Used ​​2-axis vertical lathe "DOOSAN mod. Puma VT1100" with CNC Fanuc 21i-TB Hfodpfxowrdqks Afien

Condition: used, Year of construction: 1994, Turning length 1020 mm Max. turning diameter 410 mm Max. spindle revolutions 3500 rpm X/Z movements 265/1035 mm Number of stations in turret 12 Spindle speeds on rotating tools 2500 rpm. Control: Mazatrol T32-3 Equipped with: Various tool holders Hsdpfxoxdnn Ue Afiofn

Condition: used, Year of construction: 2008, Swing over bed 923,8 mm Swing over cross slide 755 mm Max. turning diameter 356 mm Max. turning length 510 mm X/Z-axis movement 260/590 mm Turret w/12 stations Spindle speeds 5000 rpm Spindle bore 73 mm Control: MSX-850 III Equipped with: Collet chuck w/collets Chip conveyor Hjdpfx Aeu Sn Hzefisfn 3 standard tool holders No Gantry loader incl.

Condition: used, Year of construction: 2007, Turning length 700 mm Max. turning dia. 460 mm Hfodpfx Ajxdhxtefion Spindle speeds 4000 rpm X/Z travel 260/795 mm Turret w/12 stations Control: MSX-850 III Equipped with: Various tool holders

Condition: used, Year of construction: 2001, Turning length 470 mm Max. torning dia. 390 mm Spindle speeds 3500 rpm Movements X/Z - 235/520 mm No of stations in turret 12 pcs. Control: MSG 500 Accessories: Hfodpfjxdfi Nox Afien Various tool holders

Condition: used, Year of construction: 1997, Distance between centers 2070 mm Swing over bed 700 mm Swing over carriage 430 mm Max turning diameter 460 mm diameter (2000 mm) Spindle bore 90 mm Spindle speeds 14-3200 rpm Z-axis movement 2070 mm X-axis movement 330 mm Turret w/12 stations Tailstock taper MT 5 Control: Hedpfxew Rkd Tj Afiefn OSP 7000-L Equipped with: Hydraulic steady rest Chip conveyor 10-20 tool holders 10-20 sets of jaws