Condition: used, turning diameter over bed: mm
turning diameter over slide rest: mm
turning length: mm
turning length: 630 mm
swing diameter over slide rest: Hinterdrehschlitten: 250 mm
center height over bed: 270 mm
centre distance: 900 mm
spindle bore: 26 mm
range of revolutions per minute - continous: 1,8 - 450 U/min
return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min
cross feed: 0,07 - 1,11 / 36 step mm/U
longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U
tailstock quill taper MT: 5
quill travel: 250 mm
Qrqla0cx
Total power requirement: 7,0 kW
machine weight approx.: 3,9 t
dimension machine xH: 3,2 x 1,2 x 1,8 m
Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch).
Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine.
Main drive via 8-stage manual gearbox.
Feed gearbox is designed as a 12-stage manual gearbox.
Swiveling range of the rear slide = 360deg.
Swiveling range of the cross slide = 360degrees
Equipment:
lathe chuck driving disc Ø 210 mm with fixed tip
fixed tip in tailstock
with 4 pieces machine feet
Condition: used, Year of construction: 1979, turning diameter over bed: 540 mm
turning diameter over slide rest: mm
Pxm7gu
turning length: 630 mm
centre distance: 900 mm
center height over bed: 270 mm
center height: über Hinterschlitten: 138 mm
Turning diameter: über Hinterschlitten: 250 mm
longitudinal feed: 700 mm
facing movement : 80 / 75 mm
revolution per minute: 1,8 - 450 bei 8x steples U/min
bore capacity in St 60 - full boring: mm
drill capacity in cast iron: mm
clamping diameter: 26 mm
range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U
range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U
tailstock quill: MK5 mm
tailstock quill stroke: 250 mm
Total power requirement: 7,0 kW
machine weight approx.: 3,76 t
dimension machine xH: 3,2 x 1,2 x 1,8 m
Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch).
Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine.
Main drive via 8-stage manual gearbox.
Feed gearbox is designed as a 12-stage manual gearbox.
Swivel range of the rear slide = 360deg.
Swivel range of cross slide = 360deg.
Lathe chuck is cone disc Ø 200mm with MK5
Equipment:
turning mandrel Ø 49,5 x 400mm
Measuring system ARBAH-L 3+1
Inverter FRENIC 5000G11
Condition: used, Year of construction: 1968, turning diameter over bed: mm
turning diameter over slide rest: mm
turning length: mm
bore capacity in St 60 - full boring: 40 mm
drill capacity in cast iron: 55 mm
turning diameter over bed: Ø 22 - 2200 mm
clamping diameter: ca.: Ø 100 innen / Ø 200 außen mm
Total power requirement: 5,0 kW
machine weight approx.: 1,2 t
dimension machine xH: 1,70 x 0,80 x 1,40 m
Relieving lathe
This machine can also be used as a milling head (as a side support).
Designation: horizontal unit drilling machine with EB 40 Design: drilling
other technical features:
Sapovgo
Headstock:
- Speed 22 - 2000 rpm
- feed rate range 0,025 - 0,5 U/mm
- three-jaw chuck Ø 190mm with bore Ø 54mm, equipped with internal jaws
- headstock bore 45mm
- drilling spindle taper MK 5
Operation via control panel on the side of the machine.
By removing the lathe chuck, the spindle can be used as a drilling unit.
max. slide adjustment 300 mm
accessories:
-div. outer jaws for lathe chuck
We make the search easier for you
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Machineseeker certifies selected sellers with the Machineseeker trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Machineseeker staff.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for you as buyer?
The Machineseeker trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.
Disagreements may of course still arise during the purchasing process. Machineseeker is not liable for legal violations committed by buyers or sellers active on Machineseeker.