Condition: excellent (used), Year of construction: 2008, turning height: 2,600 mm, total height: 9,500 mm, total width: 5,000 mm, total length: 13,500 mm, rotary table diameter: 5,000 mm, Carousel lathe BERTHIEZ - JO-9375 MACH-ID 9648 Make: BERTHIEZ Type: JO-9375 Year: 2008 Displacable table 5000 mm 4 Table jaws 4 Table extentions  Overhauled in 2008 CE-Mark  X Traverse leadscrew replaced Servo engines and Linear scales Under power in North Spain Max. turning Ø: 10500mm Table Ø: 5000mm Single column or double column:Singel Moving table or column: Moving Chuck Hnodezcx Ttjpfx Agmsn Speeds / ranges: 60Rpm Maximum turning height: 2600mm Length: 13500mm Width: 5000mm Height: 9500mm Weight: 93000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 161 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, number of axes: 7, This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details. • Travels: • X1: 160.5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Included tooling: • 4x external tool holders • 4x tool holders for simultaneous mounting of 2 opposite tools • 6x boring bar holders • Driven toolholders (HEIMATEC): • 4x radial • 4x axial • Collet holders (Bellegrandi): • Main spindle: MSCNT70-A6” for BA & BD collets size 70, complete with related cups • Counter spindle: MSCTNR70-A5” for BA collets size 70, complete with spring ejector Additional equipment Hedpfsy N Spcex Agmenn • IEMCA Master 880/33/P bar feeder (2003), S/N: 0200347S03 • Application: Automatic bar feeder for CNC lathes • Capacity: • Max bar length: 3300 mm (to be confirmed) • Max bar diameter: up to Ø80 mm (model family reference) • Guide channels: Ø65 mm included; Ø70 mm currently installed and can be supplied with the machine • Features: Automatic loading/feeding, synchronization with lathe cycle, compatible with spindle liner/guide channel systems, heavy-duty frame • Note: Sold together with the Nakamura Tome WY-250; some accessories/guide channels may belong to the lathe setup • Complete set of hand jaws (“Manine”) for parts unloader (parts unloader itself not specified) Machine Condition / Technical Status- IMPORTANT The machine is currently being sold in its present technical condition and the seller will NOT carry out the repairs before sale. Main known issues / condition points: • Lower turret driven tooling function not working correctly • Air/oil lubrication system issues detected • Presence of rust inside the lower turret gearbox • Upper turret gearbox found filled with NBU15 grease although the system should operate with air/oil lubrication • Z1 axis linear guides/slides require replacement • Z2 axis linear guides/slides require replacement • Geometry deviations detected during machine inspection • Various spindle/brake/hydraulic cylinder run-out deviations measured • Several bearings, ball screws, seals, guide rollers, belts, lubrication components and wipers require replacement according to the attached spare parts listInspection highlights: • Machine geometry and spindle parallelism were measured and documented • Run-out values were detected on both spindles and hydraulic chuck systems • Multiple axis lubrication and protection components require maintenance/replacement • Detailed spare parts list availableIncluded documentation: • Technical inspection report • Geometry verification report • Spare parts/replacement list • Photos of damaged/worn componentsThe machine remains a highly equipped Nakamura Tome WY-250 Super Mill platform, but prospective buyers should consider the required repair and maintenance work when evaluating the machine. Technical inspection and spare parts documentation available upon request. Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2013, Main and counter spindle C-axis on main and counter spindle 2 x 12-position turret VDI 40 Y-axis Chuck flushing device Tool monitoring Brankamp Coolant system 980 liters with belt filter Hedpfey Ivyisx Agmenn Conveyor belt Oil mist separator Chip conveyor without bar feeder

Condition: excellent (used), Year of construction: 2009, operating hours: 28,742 h, functionality: fully functional, bar passage: 65 mm, FANUC Series 31i-Model A Hnsdpoydmbuefx Agmsn 3 turrets Parts conveyor Magazine Further details on request

Condition: good (used), Year of construction: 2015, Main and counter spindle 3 turrets Backside machining Fire extinguishing system Kraft & Bauer High-pressure system Büchele Hsdpfeyx Tk Tsx Agmenn Bar feeder FMB Turbo 2-20

Condition: used, Year of construction: 2007, functionality: fully functional, 6-spindle Hainbuch Spanntop Axfix D22 ARTIS integrated process monitoring system Slide units - Slide unit 1.1: X-axis fixed, Z-axis NC-controlled - Slide unit 2.1: X-axis fixed, Z-axis NC-controlled - Slide unit 1.2: X-axis and Z-axis NC-controlled - Slide unit 2.2: X-axis and Z-axis NC-controlled - Slide unit 3.1: X-axis and Z-axis NC-controlled - Slide unit 3.2: X-axis and Z-axis NC-controlled - Slide unit 4.1: X-axis and Z-axis NC-controlled - Slide unit 4.2: X-axis and Z-axis NC-controlled - Slide unit 5.1: X-axis and Z-axis NC-controlled - Slide unit 5.2: X-axis and Z-axis NC-controlled - Slide unit 6.1: swiveling axis and Z-axis NC-controlled Hnjdpfoyymbzex Agmon - Slide unit 6.2: X-axis and Z-axis NC-controlled Synchronization device, position 6.1 Part discharge via chute Workpiece conveyor belt at spindle position 6 High-pressure pump Fire extinguishing system Coolant cleaning system Hinged belt chip conveyor Flat loading magazine: IEMCA SIR MS 22/33 P

Condition: new, Year of construction: 2025, functionality: fully functional, Fanuc 32i-B control, spindle bore 20mm, two Y-axes, tool spindle with X-axis, Hedpfx Agozcxn Remonn powered tools for front, side, and back machining, chip conveyor, machine is new and does not include a tool magazine.

Condition: good (used), Conventional lathe, Pinacho model ML 18-250, year 2019. Distance between centers: 1,500 mm, main spindle bore: 58 mm, chuck diameter: 250 mm, swing over bed: 502 mm, bed width: 300 mm, Fagor Innova digital readout. Hnjdezcxnwepfx Agmon

Condition: good (used), Year of construction: 1997, functionality: fully functional, Siemens control system, Hsdpozcxk Ejfx Agmsnn spindle bore 65 mm, two turrets, live tooling spindle, Hainbuch collet chuck, MBL bar loader laser, chip conveyor.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Siemens control system, 14-position turret, tool holder VDI30, powered tools, spindle bore 65mm, bar feed MBF, Hedpfx Agszcxi Ijmjnn chip conveyor. The machine was completely overhauled in 2013.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,076 h, spindle speed (max.): 10,000 rpm, overall weight: 2,500 kg, total width: 1,263 mm, total height: 1,671 mm, bar diameter (max.): 20 mm, product length (max.): 2,291 mm, number of axes: 5, This 5-axis Hanwha XD20V COMBINED was manufactured in 2014. It features a maximum rotation speed of 10,000 rpm and a maximum working diameter of Ø20 mm. With a robust design and a weight of 2500 kg, this machine is ideal for precision turning applications. If you are looking to get high-quality Swiss type turning capabilities, consider the Hanwha XD20V COMBINED machine we have for sale. Contact us for further details. HANWHA XD20V • 4 Machines Available • Maximum Working Diameter: Ø20 mm • Rated Voltage: 3 Phases, 200/220 VAC • Rated Current: 60 A • Rated Frequency: 50/60 Hz • Ampere Interruption Capacity: 10 kA Hjdpfx Agezcxgaemsnn • Short Circuit Current Rating: 2.5 kA • Operating Air Pressure: 4~6 kg/cm² (3.9~5.9 bar)Machine 1 • Machining Hours (TEMPS USIN.): 43,977 hMachine 2 • Machining Hours (TEMPS USIN.): 42,043 hMachine 3 • Machining Hours (TEMPS USIN.): 34,212 hMachine 4 • Machining Hours (TEMPS USIN.): 22,076 h IEMCA ELITE 220 R 32 LL (Bar Feeders) not included, optional • Manufacturer: IEMCA • Model: ELITE 220 R • Type: 32 LL • Bar Capacity: Ø32 mm • Air Pressure: 6 bar • Voltage: 200 V • Phase: 3~ • Frequency: 50 Hz • Current: 8.1 A • Interrupting Capacity: 5 kABar Feeder 1 • Year: 2013 • Weight: 630 kgBar Feeder 2 • Year: 2014 • Weight: 660 kg Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2013, operating hours: 37,745 h, spindle speed (max.): 10,000 rpm, overall weight: 2,500 kg, total width: 1,263 mm, total height: 1,671 mm, bar diameter (max.): 20 mm, product length (max.): 2,291 mm, number of axes: 5, This 5-axis Hanwha XD20 COMBINED was manufactured in 2013. It features a maximum rotation speed of 10,000 rpm and a maximum working diameter of Ø20 mm. The machine operates at a rated voltage of 220–240 / 380–415 VAC and has a weight of 2,500 kg. If you are looking to get high-quality turning capabilities, consider the Hanwha XD20 COMBINED swiss type turning machine we have for sale. Contact us for further details. HANWHA XD20 2 Units Available • Rated Voltage: 3 Phases, 200/220 VAC • Rated Current: 60 A • Rated Frequency: 50/60 Hz • Ampere Interruption Capacity: 10 kA • Short Circuit Current Rating: 2.5 kA • Operation Air Pressure: 4–6 kg/cm² (3.9–5.9 bar) • Machining Hours (TEMPS USIN.): 37,745 h 24 m 26 s BAR FEEDER – IEMCA ELITE 220 R 32 LL not included, optional • Manufacturer: IEMCA • Model: Elite 220 R • Type: 32 LL • Year: 2014 • Air Pressure: 6 bar • Voltage: 200 V • Phases: 3 • Frequency: 50 Hz • Current: 8.1 A • Interrupting Capacity: 5 kA • Weight: 660 kg HANWHA XD20H • Rated Voltage: 3 Phases, 220–240 / 380–415 VAC • Rated Current: 60 A Hsdpfjzcxagex Agmsnn • Rated Frequency: 50/60 Hz • Ampere Interruption Capacity: 10 kA • Max Rotation Speed: 10,000 rpm • Axis Control: 5 Axis • Operation Air Pressure: 4–6 kg/cm² (3.9–5.9 bar) • Max Working Diameter: Ø20 mm • Dimensions (L × W × H): 2258 × 1304 × 1758 mm • Weight: 3300 kg • Machining Hours (TEMPS USIN.): 43,977 h 52 m 57 s BAR FEEDER – IEMCA ELITE 220 R 32 LL not included, optional • Manufacturer: IEMCA • Model: Elite 220 R • Type: 32 LL • Year: 2013 • Air Pressure: 6 bar • Voltage: 200 V • Phases: 3 • Frequency: 50 Hz • Current: 8.1 A • Interrupting Capacity: 5 kA • Weight: 630 kg Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2006, 510mm swing, 320mm max. machining diameter, 525mm max turned length, 4000rpm spindle, 65mm bar capacity, 12 station turret, 15W spindle motor, FANUC Oi control, collet chuck, Tool setter Tailstock, Parts Catcher, Swarf Conveyor, Coolant Hnjdszcwz Nspfx Agmjn

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 6,000 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 310 mm, spindle motor power: 7,500 W, total height: 1,700 mm, total width: 1,700 mm, overall weight: 2,500 kg, bar diameter (max.): 32 mm, controller manufacturer: MITSUBISHI, controller model: MSC-803, product length (max.): 2,500 mm, number of axes: 2, Horizontal turning machine manufactured in 1998. This MORI SEIKI CL 150 features a maximum turning diameter of 400 mm and a maximum turning length of 303 mm. It includes a spindle speed range of 60 - 6000 rpm and a turret with 12 stations for efficient tool management. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI CL 150 machine we have for sale. Contact us for further details. Control Unit Defective: At least data loss or damaged circuit board (unverified diagnosis) Hsdpfx Agezcwy Sjmenn • Swing Over Bed: 515 mm • Maximum Turning Diameter: 400 mm • Standard Turning Diameter: 176 mm • Standard Turning Length: 150 mm • Maximum Turning Length: 303 mm • Spindle Centre Height: 950 mm • Spindle Nose: A2-5 • Spindle Bore: 43 mm • Spindle Bearing Inner Diameter: 80 mm • Standard Chuck Diameter: 169 mm • Tool Size for External and Facing Tools: 20 x 20 mm • Number of Turrets: 1 • Number of Turret Stations: 12 • Turret Index Time: 0.7 sec • Turret Clamping Force: 2300 Nm • Index Coupling Diameter: 180 mm • Automatic Tool Selection Logic: Yes • X-Axis Motor Power: 1.5 kW • Z-Axis Motor Power: 2.0 kW • Manual Feed Rate: 0 - 1260 mm/min • Programmable Feed Rate: mm/rev • Rapid Traverse X-Axis: 30 m/min • Rapid Traverse Z-Axis: 30 m/min • Positioning Resolution: mm • Coolant Tank Capacity: 123 l • Coolant Pump Capacity: 13 l/min • Lubrication: Automatic Central Lubrication • Power Supply: 380 V / 3 Phase / 50 Hz • Control Voltage: 200 V AC / 24 V DC • Connected Load: 20 kVA • Rated Power: 23 kVA • Full Load Current: 67 A • Spindle Motor Current Rating: 74 A • Interrupting Capacity: 5 kA • Frequency: 50 Hz • Voltage: AC 200 V • Phase: 3 Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Hjdpjzcwyljfx Agmenn Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,159 h, spindle motor power: 7,500 W, spindle speed (max.): 6,000 rpm, overall weight: 4,200 kg, total width: 1,900 mm, total height: 1,900 mm, bar diameter (max.): 100 mm, travel distance X-axis: 150 mm, travel distance Y-axis: 385 mm, controller manufacturer: MITSUBISHI, product length (max.): 3,500 mm, number of axes: 7, This 7-axis Quick-Tech I-42U was manufactured in 2015. It features a maximum bar diameter of 42 mm and a maximum machining length of 250 mm. The machine is equipped with a powerful spindle speed of 6000 rpm and includes an automatic bar feeder. If you are looking to get high-quality turning capabilities, consider the Quick-Tech I-42U swiss type turning machine we have for sale. Contact us for further details. Hnodpfxszcwxns Agmjn • Control • Mitsubishi M720 CNC • 15" color LCD display • Door with LED indicators • Operational signaling and automatic alarm switch • Built-in communication/interface with bar feeder • CE mark • Guide/manual • Main spindle • Bearing diameter: 100.0 mm • Max bar dia.: 42 mm • Max machining length: 250.0 mm • Collet: DIN-173E42B • Spindle nose: A2-5 • Spindle bore: 44.0 mm • C axis: 0.001° • Counter spindle • Max bar dia.: 42 mm • Max machining length: 100 mm • Collet: DIN-173E-42B • Spindle nose: A2-5 • Speed: 4000 rpm • Power: 3.7 kW • C1 axis: 0.001° • Travels and axes • X: 150.0 mm | Y: 385.0 mm | Z: 250.0 mm | B: 360° • X1: 400.0 mm | Y1: 400.0 mm | Z1: 300.0 mm • Servo motors (X, Y, Z, X1, Y1, Z1): Mitsubishi AC Servo, 1.5 kW each • Indexing from tool position: 0.3 s • Tool change time (cut/cut): 0.6 s • Tool head (main) • Combined type • Tools: 6 external, 5 internal • External tool size: 20.0 × 20.0 mm • Max internal tool: ER20 / 20.0 mm • Driven tools (main) • B axis with 12 driven tools • Power: Mitsubishi AC Servo, 15 kW • Speed: 4000 rpm • Max tool size: ER-20 • Max drilling dia.: 12 mm • Max thread: M10 × 1.5 • Tool head (counter) • Combined type • Tools: 5 external, 9 internal • External tool size: 20.0 × 20.0 mm • Max internal tool: ER20 / 20.0 mm • Driven tools (counter) • Number: 6 (3 axial, 3 radial) • Power: Mitsubishi AC Servo, 1.5 kW • Speed: 4000 rpm • Max tool size: ER-20 • Max drilling dia.: 12 mm • Max thread: M10 × 1.5 • Hydraulic system • Hydraulic motor: 0.75 kW • Max system pressure: 50 kg/cm3 • Lubrication system • Lubrication motor: 25 W • Tank capacity: 2 l • Cooling system • Coolant tank: 200 l • Coolant motor: 1/4 HP • Coolant pressure: 2.5 MPa • Length: 2900 mm (3500 mm including chip conveyor, which is part of the machine) • Standard equipment included • Basic equipment with tools • Tool holder and collet set • Automatic lubrication • Chip remover/chip conveyor (integrated, per dimensions note) • Workpiece removal (shovel) – if integrated • 15" color LCD display • Operational signaling and automatic alarm switch • Guide/manual • Door with LED indicators Additional equipment • Automatic bar feeder, 1200 mm length • Workpiece removal conveyor • Workpiece removal shovel (if provided as an external unit) • Transformer 380–440 V, 60/50 Hz Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,818 h, travel distance X-axis: 155 mm, travel distance Y-axis: 25 mm, travel distance Z-axis: 170 mm, controller manufacturer: FANUC, controller model: 32i-TB, number of axes: 8, This 8s Muratec MW 40 was manufactured in 2019. It features a twin-spindle configuration with automatic loading and unloading capabilities. The machine includes 2 C-axes and 2 Y-axes, providing versatile machining options. With a total of 7 turning holders and 6 boring holders, it is designed for efficient part handling. If you are looking to get high-quality turning and milling capabilities, consider the Muratec MW 40 turn-mill centre we have for sale. Contact us for further details. • Configuration: Twin-Spindle CNC Turning Centre • C-Axes: 2 • Y-Axes: 2 • Gantry Loader: Double Gantry Loader • Spindle Configuration: Twin Spindle • Tool Holders: 7 Turning Holders • Tool Holders: 6 Boring Holders • Condition: Fully Functional • Turning Station • Voltage: 400 V • Frequency: 50 Hz • CE Marking: Yes • Loader Type: Gantry Loader • Automation: Automatic Loading and Unloading System • Part Handling: Automatic • Turning Capability: Yes • Drilling Capability: Yes • Milling Capability: Yes • Tapping Capability: Yes • Coolant Filtration: Basket Filter • Transformer: 16 kVA • Transformer Input Voltage: 400 V • Transformer Output Voltage: 200 V • Hydraulic Chuck Foot Switches: 2 • Tool Monitoring System: Muratec Cutting Monitor • Tool Management System: Tool Counter with Sister Tool Selection • Polar Coordinate Interpolation: G12.1 • Cylindrical Interpolation: G7.1 • Rigid Tapping: Yes • Coolant and Air Through Spindles: Yes • Twin Front Spindles: Yes • Books are included (instruction manual in German) Optional: Hnsdpfx Aszcwiyegmjn • Parts Infeed Conveyor • Parts Outfeed Conveyor • Chip Conveyor Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), functionality: fully functional, Deep Hole Drilling Unit / Deep Hole Drill Manufacturer: POREBA Type: Deep Hole Drilling Attachment / Drilling Rig Condition: Used, good technical condition Technical Data Feed stroke: up to 900 mm Weight: approx. 780 kg Electrically driven feed system Heavy-duty industrial construction Integrated control panel Complete unit with drive motors Description Offered for sale is a robust deep hole drilling unit manufactured by POREBA. The attachment is suitable for installation on large conventional lathes or special-purpose machine tools and features an electrically driven feed system with a travel of up to 900 mm. Its rigid construction provides excellent stability and precision during deep hole drilling operations. The unit is supplied complete with drive motors, control panel, and mounting components visible in the photographs. Hodpfxjzcvuue Agmjnn Advantages ✔ Heavy-duty industrial design ✔ Feed travel up to 900 mm ✔ High rigidity and stability ✔ Electrically driven feed system ✔ Suitable for deep hole drilling applications ✔ Proven POREBA engineering Transport Approximate weight: 780 kg Loading assistance available

Condition: excellent (used), Year of construction: 2020, - Siemens Sinumerik 828D control system - Accessories: Collet chuck Working area Swinging diameter over bed ø250 mm Swinging diameter over cross slide ø85 mm Hedpfszcv Riex Agmonn Maximum turning diameter ø85 mm Maximum turning length 225 mm Maximum bar capacity ø25.5 mm Distance between centers (spindle nose – tailstock center) 405 mm Slide travel range Slide travel X 100 mm Slide travel Z 300 mm Main spindle Spindle mounting (centering rim) ø70 h5 Spindle outer diameter at front bearing ø50 mm Main spindle clamping system Hollow cylinder (pneumatic) with draw tube, max. passage ø25.5 mm Max. chuck size ø100 mm Main spindle drive AC motor, power (100%/40% ED) with integrated holding brake for driven tools 3.7 / 5.5 kW Speed range (continuously variable) 60-6300 rpm Max. torque 35 Nm Dimensions Height of the turning axis above the floor 1130 mm Overall height 1820 mm Footprint (without options) 1700 x 1270 mm Weight 1400 kg

Condition: excellent (used), Digital display Heidenhain Center height 200 mm Distance between centers 800 mm Swinging diameter over carriage/bed 240/425 mm Length of the offset from the faceplate with 4 jaws 180 mm Spindle bore 51 mm Hnodezcvnuspfx Agmsn Internal taper 60 Metric Tool holder Camlock D6" Spindle speed 45-2240 rpm Lead screw pitch 6 mm Tailstock quill holder MK 4 Diameter of the tailstock quill 70 mm Quill stroke 200 mm Feeds: Longitudinal 0.05-2.8 mm/rev Facing 0.05-2.8 mm/rev Rapid traverse: Longitudinal Thread pitches: Metric 0.5-14 mm English 2-56 TPI Module 0.125-3.5 Motor 380 Volt, power 12.5 HP Machine dimensions: W x D x H 2400 x 1200 x 1800 mm Weight 2100 kg

Condition: excellent (used), Year of construction: 2019, MAZAK QUICK TURN 350MB 1250U Max. swing diameter: 830 mm Max. turning diameter: 420 mm Max. turning length: 1,250 mm Max. milling speed: 5,000 rpm Max. spindle speed: 3,300 rpm Machine is equipped with: - CNC control Mazatrol SmoothG Hnsdpoy Igz Dofx Agmsn - SMW three-jaw chuck KNCS 400, diameter 400 mm - Tool Eye - C-axis - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: good (used), CMZ brand CNC lathe, TX66 Y2 Quattro model, year 2012, with powered tooling on both turrets, Y-axis... Hnedpfozcu Hiex Agmjn

Condition: used, Year of construction: 2001, functionality: fully functional, bar diameter (max.): 32 mm, INDEX MS32P CNC Multi-Spindle Mfd. 2001 SN: 150127 Bar Feed: IEMCA SIR-MS32/33/P (3 Meters) Control: Siemens 840D Integrated Knoll Chip Conveyor Hnodpfx Ajy Ruu Djgmon External Knoll High-Pressure Filtration Unit 6 Spindles 32mm Capacity 1 Synchron High-Performance 6+1 Configuration Back-Working Capability: Equipped with a Swiveling Synchronous Spindle for simultaneous rear-end machining. Complete Part Processing: Characterized by the ability to perform drilling, tapping, and milling on the cutoff face while the next part is being machined in the main spindles, enabling dropped-complete part production. The "P" Quill Advantage: The "P" model uses hydrostatic quills (Z-axis).

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets 2 spindles Fanuc Control: 31i-Model B Axial Motorized Switches: 6 pcs Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Hedpfsxxm Hfex Agmsnn Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: On time: 37946 Hydraulic hours: 37,500 Production time: 26,500 With MBL Bar Feed

Condition: used, functionality: fully functional, Leadscrew and feed shaft lathe Manufacturer: Heidenreich & Harbeck, Type VDF V3 Technical Data Brand: Heidenreich & Harbeck Type: VDF V3 Year of manufacture: unknown Control: conventional Centre distance: 1000 mm Swing diameter over bed: 520 mm Spindle bore: 63 mm Dimensions: L 3.40 x W 1.10 x H 1.40 m Machine weight: approx. 3.5 t Equipment - 4-jaw chuck Röhm, diameter 250 mm Hodpsy Iyzqsfx Agmenn All information provided without guarantee. A power-on demonstration is possible at any time in our showroom.