Condition: like new (used), For sale is a used Record Power band saw BS 300 E with a cutting width of 305 mm. The saw is in nearly new condition and has been reconditioned and inspected by our professional staff. (Fully functional) Redpfxjyx Dalj Ab Isr Technical data: - Cutting height: 190 mm - Cutting width: 305 mm - Saw blade length: 2370 mm - Blade width: 8-15 mm - Table tiltable 90-45° - Includes base with wheels The band saw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: band saw, saws, saw, band Reference: R-AT0EF

Condition: good (used), For sale is a used Felder bandsaw FB 400 with a cutting width of 380 mm. The saw is in good condition and has been reconditioned and inspected by our specialist staff (fully functional). Technical data: - Wheel diameter: 400 mm - Cutting height: 250 mm - Cutting width: 380 mm - Table tilt: 0-45° - 0.7 kW / 1 HP motor / 400 Volt - Mobile base - Please note: No fence included!!!! Redpfx Ajyx A I Iob Isr The bandsaw is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Reference: R-Z1428

Condition: excellent (used), For sale is a used Elektra Beckum circular saw PK255/3400 with a maximum cutting height of 80 mm. The machine is in very good condition and has been refurbished and inspected by our specialist staff. (fully functional) Technical data: - Circular saw tiltable 90-45° - Max. cutting height 80 mm - Mitre stop - Sliding table Rodsyx A Egepfx Ab Isr - Max. saw blade D= 250 mm - 3.8 HP / 400 Volt The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw Reference: R-AT0C9

Condition: good (used), For sale is a used Holzprofi FPSF-2000 M combination circular saw and spindle moulder with a cutting width of 1000 mm. The machine is in good condition and has been serviced and inspected by our professional staff. (Fully operational) Technical specifications: - Circular saw tiltable 90-45° - Fixed spindle moulder - Sliding table 2500 mm - Cutting width 1000 mm - Outrigger table with crosscut fence - Short mitre fence - Spindle moulder fence 240 mm - 3 spindle speeds: 3000/5000/8000 rpm Redpfeyx Ar Tsx Ab Isr - Dual motors, each 4 HP The machine is located in A-8561 Söding and can be inspected during our business hours. Subject to prior sale! Related terms: saw, circular saw, spindle moulder, combined machine, combination machine, milling machine Reference: R-Y00P2

Condition: like new (used), Year of construction: 2021, DEMO MACHINE For sale is an as-new Wesetslintner long belt sanding machine with a 6800 mm belt length. The demo machine is in original condition, so you receive the full warranty. Technical data: - Table size: 2500 x 900 mm - Belt length: 6800 mm - Belt width: 150 mm - Electrically adjustable table height - Lighting - Motor power: 2.9 kW / 4 HP - Year of manufacture: 2021 The machine is located in A-8561 Söding and can be inspected during our business hours at any time. Subject to prior sale! Rodpfx Ajyx Anujb Ijr Related terms: long belt, sanding machine, surface finishing Reference: R-D1618

Condition: excellent (used), Extraction system Lamier FL 7B 4kw Power 4kw Rsdjwnbpcjpfx Ab Ier Number of collection bags 2pcs Bag diameter fi600mm Number of filter bags 32pcs Filter bag diameter fi 200mm Filter bag length 1550mm Bag shaking system Inlet nozzle diameter 300mm CE certificate Dimensions height 370cm width approx. 260cm depth 110cm

Condition: excellent (used), Automatic carbide saw grinder VOLLMER model CHC 20 H Redpsyx Aakjfx Ab Ijr

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Rjdexy Tm Ispfx Ab Ier

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Rsdpfx Aboxy Tmus Ior

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Redpfxexy Tmne Ab Isr

Condition: used, Year of construction: 1986, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Rjdpfow D Aybjx Ab Ier

Condition: used, Year of construction: 1992, Wheel diameter: 500 mm Band guidance above and below Tilting table Redpfjw D Aw Hox Ab Ijr Location: Nattheim

Condition: used, Year of construction: 2001, Abrasive belt length, 1st unit: 2150 mm Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Cross belt design 1st unit: Cross belt sanding shoe 1st unit: Electronic segmented shoe Abrasive belt width, 1st unit: 150 x 4800 mm Drive, 1st unit: kW 2nd unit: Longitudinal roller design 2nd unit: Steel calibrating roller Abrasive belt length, 2nd unit: 2150 mm Abrasive belt width, 2nd unit: 1350 mm Abrasive belt speed, 2nd unit: 18 m/sec 3rd unit: Shoe unit design 3rd roller: Electronic segmented pressure beam SDS Sy Sanding shoe, 3rd unit: Electronic individual segments, 32 mm width Abrasive belt length, 3rd unit: 2150 mm Abrasive belt width, 3rd unit: 1350 mm Suitable for lacquer sanding: Yes Belt blow-off: Yes Rodpexzi S Njfx Ab Ior Vacuum conveyor belt: Yes Feed speed, fixed: stepless 5-15 m/min Control: Touchscreen control Electr./pneum. belt oscillation: electric Infeed height: variable (lower table runs) Table stroke: electro-motor Digital table display Working height or feed table height: 880 mm Location: Nattheim

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Rsdsxy Tlwopfx Ab Ior

Condition: used, Cutting length 5300 mm, cutting height 2200 mm, motor 5.5 kW, cutting depth 80 mm, free-standing. Rsdpoynbm Hjfx Ab Ijr Storage location: supplier

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Product description: The Easyplan is a compact yet powerful drying system designed for both softwood and hardwood drying, as well as for ISPM-15 compliant pallet and wood packaging heat treatment. It guarantees full phytosanitary compliance and consistently provides high-quality drying results across a wide variety of timber species. Installation is completed in less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automated: simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: - Electric - Gas - Hot water / steam Key benefits: - Capacities of 10 m³ or 20 m³ to match different production requirements - Suitable for both softwood and hardwood - ISPM-15 compliant pallet and wood packaging heat treatment - Fully automatic drying process - Fast installation in under 24 hours Rsdsw Hfzaspfx Ab Ier - Flexible heating solutions to suit available energy sources Easyplan is the ideal solution for companies seeking a compact, fast-to-install timber drying and ISPM-15 pallet treatment system that does not compromise on performance or quality.

Condition: used, Year of construction: 1981, used machine year of manufacture 1981 Rsdpfx Aoyxx U Rob Ior

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: Cutting range: Cutting length: 4,300 mm Cutting height: 2,100 mm Cutting depth: max. 60 mm Extraction: Saw unit: 120 mm Frame end: 100 mm Workpiece support: Stable plastic support for optimal stability, even for narrow workpieces Rjdpfx Ajyxx U Dsb Ier Chips are removed through slanted grooves Roller transport system: Manual for easy and material-friendly transport Indexing: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: TCT, 250 mm, hollow flat tooth, Z48 Saw motor: 4 kW at 5,450 rpm, 400 V, 50 Hz Crosscut rail: Including workpiece stop for narrow parts (4 sections) Extraction system according to BG guidelines TRK (below 2 mg fine dust / m³ air) Dimensions: approx. 5,100 x 1,100 x 2,600 mm Weight: approx. 1,100 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical data: Rjdpfoyxyabjx Ab Ier Cutting length: 3600 mm Cutting height: 1644 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Motor: 3 kW Incl. intermediate workpiece support on all sections Incl. narrow part device Incl. manual length stop Dimensions approx.: 4620 x 1500 x 2460 mm Location: Röllbach Availability: short notice

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - Control unit with 15" touch screen - Jointing milling unit with 2 milling heads - Edge feed - GluJet 301 glue application system: 2.3 kW, automatic glue height adjustment, sensor nozzle - Pressure unit: pneumatic - End trimming unit: pneumatic - Diamond cutters left/right with CM technology - Corner copying unit with diamond cutters - Surface scraper - Polishing unit - Extendable workpiece support - Motorized pressure bridge adjustment with NC axis via program control - Extraction hoods for end trimming unit - Multifunction milling unit: MOT 4 - Vertical tracing rollers: pneumatic - Pneumatic tilting device for milling unit MOT 4 - Scraper unit MOT 2 with chip collection box - Spray unit for infeed and outfeed area - Minimum workpiece length: 160 mm - Workpiece thickness: 6-60 mm - Edge thickness: 0.4-6 mm - Feed speed: 10 m/min - Total length: 4930 mm - Weight: 1420 kg Availability: short-term Location: 63934 Röllbach Rjdpfx Asyxyahsb Ior

Year of construction: 2005, condition: used, Used machine Year of manufacture: 2005 Equipment and technical specifications: Blockhouse milling machine BL100A – Four-spindle unit Designed for the production of chalet corner joints by milling all four sides of the log beam in a single clamping operation using 2x vertical and 2x horizontal milling spindles. Processing dimensions: 140 x 200 mm Milling spindle diameter: 30 mm Milling cutter diameter x width max.: 4 x 220 x 100 mm Motor power: 4 x 3.0 kW Speed: 4,200 rpm Feed: Hydropneumatic, infinitely adjustable with rapid traverse function Operation: Triggered by two-hand control / via control unit Milling depth adjustment via spindle, digital counter Workpiece clamping device: 2x vertical pneumatic clamps Extraction: Underfloor extraction funnel, diameter 160 mm Complete with electrical equipment, PLC control, and pneumatics. Machine base prepared for integration of an end groove and drilling unit as well as the cross-cut saw. Enclosed machine housing with hinged safety hood (supported by gas strut) and viewing window. Electric control cabinet mounted on base with 3.0 m cable duct. Ready for operation, but without tools! 2 horizontal clamps on the BL100 machine table Operation: Pneumatic, accessible from the front Automatic clamping cycle via PLC control. End groove unit Milling spindle diameter: 30 mm Milling cutter diameter x width max.: 180 x 40 mm Motor power: 3.0 kW Speed: 4,200 rpm Feed: Hydropneumatic, infinitely adjustable with rapid traverse function Height adjustment via spindle, digital counter Workpiece clamping device: Additional 1x vertical pneumatic clamp Integrated in the BL100, complete with electrical equipment and pneumatics. Ready for operation, without cutter! Horizontal drilling unit with drill guide and chip guard Drill diameter max.: 30 mm Motor power: 1.1 kW Speed: 1,500 rpm Feed: Pneumatic, infinitely adjustable with rapid traverse for idle stroke Height adjustment via spindle, digital counter Workpiece clamping device: Additional 1x vertical pneumatic clamp Integrated in the BL100, complete with electrical equipment and pneumatics. Ready for operation, with drill bit D=20mm! Under-table crosscut circular saw in BL100A – For automatic operation only! Max. cutting size (WxH): 200 x 140 mm Saw blade diameter: 500 mm Rjdpfx Asyxyansb Isr Motor power: 4.0 kW Cutting speed: 86 m/s Feed: Pneumatic Operation: Only via automated program (not included in delivery) Workpiece clamping device: Pneumatic Extraction funnel: diameter 120 mm Integrated in the BL100A, complete with electrical equipment and pneumatics – Ready for operation, including saw blade! Prepared for automatic operation Includes sliding table (mechanics, pneumatics, and electrics) for the end groove milling unit and the electrical interface for controlling the functions of the BL100A using an external Tigerstop control system. Infeed table length: 9 m Outfeed table length: 4 m Further technical description to follow Availability: End of March / Beginning of April 2026 Location: Netherlands

Condition: used, Used machine Year of manufacture: 2004 5,000 operating hours Equipment and technical specifications: Planing width: 230 mm Planing height: 120 mm Number of spindles: 6 Bottom spindles: 2 Right spindle: 1 Left spindle: 1 Top spindles: 2 Spindle arrangement: bottom-right-left-top-top-bottom Motor power in kW: 11-7.5-7.5-11-11-11 Maximum spindle speed: 6,800 rpm Spindle diameter: 40 mm Feed speed max.: 30 m/min Variable feed speed Feed motor: 4 kW Main motor: 11 kW Pre-planing cutter Redpfxoyxyauj Ab Isr Machine table surface chrome-plated Infeed table length: 2,000 mm Powered table rollers Manual lubricator Pneumatic pressure system Cardan drive for feed rollers Total connected load: 80 kW Dimensions: 4,100 x 2,050 x 1,900 mm The machine is offered without tooling! Used tooling can also be supplied on request. Availability: approx. mid/end of April Location: Netherlands

Condition: excellent (used), Fezer Crosscut and Mitre Saw The powerful solution for workshop and construction site for cutting wood, aluminium, and plastics Type: KG 25 AC motor 220 Volt, 0.85 kW 2800 rpm Rsdpfjyxx Evjx Ab Ier Indexing for mitre cuts Any intermediate position can be locked by clamping screw. For 250 mm saw blade Weight: approx. 24 kg Cutting capacity at 90 degrees: H = 50 mm / W = 120 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1979, Ulmia 1725 Precision Sliding Table Saw Precision miter cuts and fine joinery work. Saw blade adjustable in height and tilt. Saw blade swivels from 0-45 degrees according to scale and can be set precisely to the desired cutting height in any position. Tabletop with removable table insert and one guide groove each to the left and right of the saw blade. Slides longitudinally on ball-bearing segments in hardened and ground guide tracks, with return spring. Rodpfeyxx D Ssx Ab Ier Table size: 1100 x 700 mm Minimum distance from saw spindle to top of table: 60 mm Saw blade height adjustment: 60 mm Max. saw blade diameter: 350 mm Max. cutting height: 115 mm Cutting width to the side of the blade (normal): 360 mm Saw blade bore: 30 mm Table travel (normal): 430 mm Saw spindle speed: 4,500 rpm Motor power: 2.2 kW Height to top edge of table: 880 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Haffner Chain Mortiser KKF 15 Chain Guide bar Handwheel adjustment Door support Location: From stock 54634 Bitburg Redjyxx A Uepfx Ab Ier - Immediately available -