Condition: refurbished (used), Year of construction: 2016, LAMELLA - CARCASE PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration with: - Sturdy, torsion-resistant frame made of steel in welded and bolted construction - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with proven tolerance compensation system (Ganner system) for tightly pressed carcase joints - Counterpressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical pressing beam - Electromotorical adjustment of both pressing beams via precision trapezoidal-thread spindles (with increased pitch and concentricity accuracy) and high-performance traveling nuts with grease reservoir - Pressing is carried out electrically via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the beams is infinitely electronically adjustable via 2 potentiometers and regulated by a frequency inverter, resulting in absolutely wear-free pressing force control - Pressing force for horizontal pressing beam: min. 500 daN (kg) up to steplessly max. 2200 daN (kg) Pressing force for vertical pressing beam: min. 300 daN (kg) up to steplessly max. 2200 daN (kg) Pressing and adjustment speed of the beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second Very easy operation - Working height/loading height: 300 mm - Working dimensions: length min: 150 mm, max: 2500 mm Dslhjxvitijcdw Dewd height min: 150 mm, max: 1400 mm depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German language Completely overhauled by Ganner, 6 months parts warranty Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2006, functionality: fully functional, total width: 1,900 mm, total height: 1,800 mm, total length: 2,500 mm, briquette diameter: 80 mm, overall weight: 2,400 kg, type of input current: three-phase, oil tank capacity: 600 l, – after technical inspection – Italian production – year of production 2006 – DTR TECHNICAL PARAMETERS: – briquette Ø: 80 mm – max. briquette length: 80 mm – efficiency: 350 kg/h – engine power: 27.5 kW – hydraulic crush: 1400 kg/cm2 Dslhcdwov T Upho Djwd – max. operating force: 150 bar – oil capacity: 600 l – container diameter: Ø 1200 mm – container height: 90 cm – dimensions (length/width/height): 2500 x 1900 x 1800mm – net weight: 2400 kg

Condition: used, Veneer press continuous press gluing press plate press Bürkle HSO 240/D 340/140 Press dimensions: 3400x1400mm Djlhcdowng Tyjw Djwd Max discharge pressure 240T Max pressing pressure 6 kg/cm² Cylinders 8 pcs. with diameter 110mm Stroke 150mm Solid plates 40mm Water heated with boiler up to 60 degrees. Plates can be heated up to 150 degrees with the right boiler. Press dimensions: 2500x3900xH2800mm, 8500kg Input conveyor dimensions: 2200x3600mm, 500kg Documentation still available, first owner! Sold as one unit including conveyor belts - Documentation available: No - Max. workpiece length [mm]: 3400 - Max. workpiece width [mm]: 1400 - Number of cylinders [pcs]: 8 - Total working pressure [ton]: 240 - Working pressure [kg/cm²]: 6 - Heating type: Water heated - Max. working temperature [°C]: 150 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1980, machine/vehicle number: 8003-081, This Maweg frame press, model: Euro 5, is being auctioned in our industrial/machinery auction – insolvency auction Wietec Fenster GmbH: machinery fleet, workshop equipment, trailers, online. You will find this and many other items on our platform. Dwjlhcjxu Tuzedw Dod

Year of construction: 2025, condition: new, functionality: fully functional, The vacuum bag for professionals and handymen - DIRECTLY FROM THE INVENTOR Vacuflex is the ideal vacuum bag for professional users who want to profitably produce exceptional workpieces made of wood or wood-like materials. The robust and fabric-reinforced material guarantees longevity even when used at the highest level. Thus, the vacuum bag fits perfectly into professional production processes. With Vacuflex, you are able to extend your product range extremely, achieve better results in the production process significantly and inspire your customers with short production times. Vacuflex is the number one choice when it comes to manufacturing very large workpieces in the fastest way possible. For this reason, it is also ideal as a complement to vacuum presses and gives you the certainty that you can always cover the widest possible range of production processes cost-efficiently without suppliers. Djlhcdwsxu Ed Ij Djwd With this system, which has been tried and tested for over 40 years, hundreds of users have already been able to achieve extraordinary results in production and sustainably increase their success through the use of vacuum technology. It is ready for use very quickly and amortizes itself in a short period of time, even at low utilization.

Condition: used, Year of construction: 2006, 4 movable beams Working dimensions: Height 269cm/ 360cm Shoe width 100mm 30mm diameter cylinders Double-acting cylinders Vertical cylinder stroke 150mm Horizontal cylinder stroke 100mm Hydraulic locking shoes 1.73kW pump 160 bars of pressure Dolsxu Ddaohcdw Djwd 380V

Condition: new, Year of construction: 2025, operating hours: 6 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net Dwelhcogl Nlmodw Dod * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), A press is ideal for gluing up to 4200 x 500 x 70 mm. As the presses are open on the right and left, several presses can be placed in a row. Dwelhcevq I Ufsdw Djd For a length of around 12m, 3 presses are required. Data per press: 15 press cylinders (membrane cylinders) Press stroke per cylinder 70 mm, press force per cylinder 6800 N 16 hold-down clamps Loading dimensions L 4.5 x W 1.1 x H 0.5 m Own weight approx. 600 kg Price for 3 presses from 8000€

Condition: excellent (used), Year of construction: 2012, operating hours: 21,000 h, functionality: fully functional, year of last overhaul: 2025, protection type (IP code): IP54, Briquetting Press RUF 400 COMPLETE BRIQUETTING LINE AVAILABLE FOR PURCHASE: Dolhcdwjxu Ryuj Dewd Drum sawdust dryer Feed auger Belt conveyor – 2 pcs Separator with hopper Screw conveyor – 6 pcs Wet sawdust storage bin Fuel storage bin Wood waste boiler Wood waste crusher Extraction fan with cyclone Packing machine with compressor Additional photos and information available upon serious inquiry.

Condition: excellent (used), Bargain from liquidation 2006 Excellent condition 2500/1300 Electric heating plates 70 t press force Delsxtfxpohcdw Dewd

Year of construction: 2025, condition: new, INFINITY - the vacuum press system in special lengths The Columbus INFINITY is the new and groundbreaking vacuum press system that can be constructed in the length desired by the user on request. The specially created and eponymous Infinity Principle, according to which the usable area in terms of length can be increased very cost-effectively almost to infinity, is used in each individual component. The system offers both maximum flexibility and maximum efficiency, because where the Infinity Vacuum Table and the Rolling Membrane System offer infinity, the Multi-Zone Suction guarantees maximum control. Thanks to this Multi-Zone Suction, only that section of the usable area that is currently in use is vacuumized. INFINITY is perfect for all users who value an infinite usable area for a wide variety of special pressing with maximum yield volume. Delhcdsxu Eduow Dowd Directly from the manufacturer - including warranty! Execution: Length and width on customer request! Table base made of stable, welded metal construction, adjustable table feet. The table material is a 21 mm thick birch plywood board. An approx. 15 mm wide vacuum suction groove is milled on the table surface to seal the membrane. The membrane is wound onto a reel and is manually unrolled onto the table surface using a very smooth-running linear slide. The cavities of the table frame serve as vacuum buffer storage. The vacuum pump has an output of 100 m³/hour. The table surface has several suction grooves, these are divided into 5 suction zones. The table load is about 200 kg / m

Condition: new, Year of construction: 2024, Good, used demonstration machine Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Dolhed Nm Sijcdw Dswd Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Year of construction: 2016, condition: reconditioned (used), press aggregate with 2 hydraulic press arms around the glued board slats in the mechanical press offset free to press. Dwslhod Dcmqscdw Djd (instead of using a big hammer or big weights on the crane hook)

Year of construction: 2025, condition: new, functionality: fully functional, MOVE — the high-precision vacuum press with a gigantic usable area for vacuum shape bonding and vacuum veneering of curved workpieces. With extensive flexibility, due to absolute mobility and revolutionary folding mechanism, to reduce the floor space to 45 % when folded. High-precision vacuum press with flap opening incl. - Revolutionary folding mechanism (reduction of the floor space to 45 %) - 40 m³ high-performance vacuum pump (up to 900 mbar (9 t / m²)) - optional, automatic switch-off when pressure is reached (with large vacuum volume) - Pressure regulation 400 to 900 mbar, analog vacuum pressure gauge - Highly elastic natural rubber membrane (up to +130 °C) - Membrane fast-change system - Stable phenolic resin worktop (up to +120 °C), glued 15 times - Gas springs for flap opening - Vacuum pressure gauge - Connection for external vacuum bag - Smooth-running swivel castors - FESTO pneumatics and SIEMENS electrics Technical data and dimensions: Dolhcdwoxu Edno Djwd - Usable area: approx. 3050 x 1350 mm - Overall dimensions: approx. 3700 x 1700 x 1100 mm - Overall dimensions (folded): approx. 3650 x 770 x 1780 mm - Dimensions inside the frame: approx. 3130 x 1430 mm - Voltage: 230 V - Power: 1,2 kW - Supply frequency: 50 Hz - Weight: 670 kg

Condition: new, Year of construction: 2025, operating hours: 8 h, One machine - ready produced Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series Djlhcdoxfwdjw Dowd + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), price starts from 2.800 EUR gluing press 42000 x 450 x 60 mm press Dwjlsg Uk Eishcdw Dsd 15 pieces press cylinder ( Membrane cylinder ) with press stroke per cylinder 70 mm, press force per cylinder 6800 N 16 hold-down devices Loading dimensions L 4.5 x W 1.1 x H 0.5 m Own weight 600 kg Price on request 2 press frames to turn 3 press frames as gluing star 4 press frames

Year of construction: 2025, condition: new, Exclusive to Columbus: the digital master manual with user knowledge from +45 years Modular system - can be upgraded at any time with a vertical opening mechanism and heating system for plastic panels! Directly from the manufacturer - including warranty! PIONEER Basic L - high-precision vacuum press incl.: Delhcjxu Edhedw Djwd • Membrane fast-change system • Gas springs for flap opening • Highly elastic natural rubber membrane (up to +130 °C) • Stable phenolic resin worktop (up to +120 °C) • 40 m³ high-performance vacuum pump (up to 900 mbar (9 t / m²)) from BECKER • Analog vacuum pressure gauge • Connection for external vacuum bag • Feet including smooth-running swivel castors • Mounting fixture for vertical opening system • FESTO pneumatics and SIEMENS electrics Technical data: • Voltage: 400 V • Power: 1,3 kW • Supply frequency: 50 Hz Dimensions: • Usable area: approx. 3050 x 1350 mm • Dimensions inside the frame: approx. 3130 x 1430 mm • Max. workpiece height: approx. 600 mm • Overall dimensions: approx. 3700 x 1640 x 1080 mm

Condition: good (used), Used machine, good condition. Delivery time appr. 16 weeks after ordering Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge Dslhcdsfmqq Eow Djwd 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Year of construction: 2025, condition: new, Exclusively from Columbus: the digital master manual with user knowledge from +45 years enables safe use of the press Modular system: Vacuum press with flap opening - can be upgraded at any time with a vertical opening mechanism for high workpieces and better usability AND heating for forming plastic panels (such as Corian) 3 different sizes available Dwolhcoxu Ec Rsdw Ded Austrian, ISO-certified mechanical engineering quality with the exclusive use of branded components guarantees many years of use

Condition: new, Year of construction: 2025, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Dsljffh Atohcdw Dowd Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Briquetting press for wood or wood-like materials Throughput: approx. 80 - 100 kg/h Briquette: 60 mm cylindrical Motor: 7.5 kW Oil heating 6,374 operating hours Dimensions: approx. 2150 x 1700 x 1400 mm Container size: 1400 x 1400 x 920 mm Optional: Extraction unit available as a hopper attachment. Requirements: Ideal input material: chip length less than 25 mm Moisture content: 6–12% ATRO Dwolhew Hpizecdw Ded Machine is suitable for intermittent operation, e.g. up to 2 hours briquetting; 1 hour pause, etc. If the machine is to run continuously for more than 2 hours at a time, an optional cooling system must be connected.

Condition: as good as new (ex-display), Year of construction: 2024, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. Dwelhcdsd Nnwlow Dod -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: like new (used), Year of construction: 2024, operating hours: 29 h, *one machine is ready for delivery and ready produced Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Classic type - throughput up to 425 kg / h * depending on the material Options for an extra charge: Plant construction / mütek system technology: - mütek shredder MRZ shredding technology - conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - screw conveyors - silos - Control links of all kinds - semi-automatic packaging technology Press: - Packing table with drawer - Top-mounted silo with discharge Your advantages: Most important point: + Very established, well-engineered die press thanks to 25 years of experience. The difficulty and the know-how lies in the detail. For example, valves and cylinder seals of the highest quality. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics Technical data briquetting press: Throughput: up to 425 kg / h * * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material. If no test material is made available to us, we cannot make any statements about the briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Main hydraulic compressor Pressing pressure: up to approx. 1700 kg / cm² Hydraulic system with 260 liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 ph Manual operation of all cylinders "Dustproof" switch cabinet with PLC control and touch display Total power consumption of the briquette press: approx. 33 KW Muxzr8 Djlhcdwofhql Te Dowd Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - temperature where machine is placed + 8 degrees - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear.

Condition: good (used), Refurbished machine Basic machine starts at a price of 147.700 € net *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Dwelhcdj E Dqusw Ded Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: good (used), Year of construction: 2001, Good, used condition. Few operating hours (1675 hrs). Motor: 11 kW. Throughput up to a maximum of 220 kg/h. Briquettes: 150x60 mm. Press dimensions: approx. 2200x3000x1920 mm (LxWxH). Dslhcswcc D Rjdw Dowd Control cabinet dimensions: 500x1250x2120 mm (LxWxH). Weight approx. 3000 kg.