Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Brodbaek centering device. Todpfxe Ahhzas Apded

Condition: like new (used), functionality: fully functional, Saw motor for Linck VSV 80, with 80 kW and telescopic shaft. Saw motor for Linck VS 66. Tsdpfj Ahhzljx Apdod

Condition: reconditioned (used), functionality: fully functional, A CAMBIO 35 debarker is for sale. Todpfx As Ahi Imopdjd The CAMBIO 35 is equipped with a baby roll, which enables the debarking of logs with a minimum length of 1.5 m. The set includes a SODERHAMN conveyor with additional rollers after the debarker. The debarker will be sold after a major overhaul.

Condition: good (used), functionality: fully functional, EWD High-Performance Frame Saw – HDN 600 / GDZ 600 / LSH Several EWD high-performance and full-frame saws in very good technical condition are available for sale. The machines can be offered individually or together, depending on the model. Complete overhaul possible upon request. EWD HDN 600 – High-Performance Frame Saw / High-Speed Frame Saw Well-maintained, high-performance EWD HDN 600 full-frame saw in very good condition. Already renewed or modernized: * Struts renewed (2026) * Flywheel renewed (2026) * Water-cooled guides installed (2026) Technical Data Tjdpfx Aps Ahfmdeded Manufacturer: EWD Type: HDN 600 Frame width: 710 × 735 mm Stroke: 600 mm Speed: 310 rpm Equipment / Scope of delivery * Fully hydraulic design * Automatic overhang adjustment * Hydraulic saw tensioner * Hydraulic saw chuck * Pre-selection gearbox * Drive motor * Hydraulically driven splitting wedge, type AVER * Remotely controlled clamping carriage * Electrical control cabinet with control system The system is in very good technical condition and can be completely overhauled and delivered upon request. --- EWD GDZ 600 – Full-Frame Saw / Frame Saw An EWD GDZ 600 is also available in very good condition. Equipment / Scope of delivery * Hydraulic saw tensioner * Splitting wedge * Pre-selection gearbox * Remotely controlled clamping carriage H38 * Cabin The EWD GDZ 600 can also be offered with a complete overhaul upon request. --- EWD LSH Frame Saw In addition, 1 x EWD LSH frame saw is in stock. Further details on design, equipment and technical condition are available upon request. Availability All machines can be inspected by appointment. Further technical data, photos, prices and information on the respective scope of delivery are available upon request.

Condition: used, Year of construction: 1980, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: CMS- MI, cutting length (max.): 6,000 mm, year of last overhaul: 2023, Equipment: cabin, documentation/manual, scorer, We are offering for sale our BonGioanni brand band sawmill. Tedpfxs Ad Ur Re Apdod It features complete control systems, an operator cabin, log storage, infeed conveyors, and transport tracks. Wheel diameter: 1300 mm Wheel width: 170 mm Log carriage length: 4300 mm Distance between log clamping claws: 1710 and 830 mm Motor power: 55 kW Log splitting saw.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,060 h, functionality: fully functional, overall weight: 1,750 kg, total width: 2,300 mm, total height: 2,400 mm, total length: 7,500 mm, input voltage: 400 V, year of last overhaul: 2026, transport width: 2,350 mm, Equipment: documentation/manual, Year of manufacture: 2017 – Engine: 15 kW Cutting dimensions: – Maximum log diameter: 95 cm – Clear distance between rollers: 73 cm – Maximum cutting width (plank): 64 cm – Maximum cutting height above the blade: 39 cm – Maximum cutting length: 6.2 m The sawmill is equipped with a complete hydraulic system: – Hydraulic leveling system – Side stops Todps Aavnfsfx Apdsd – Material press – Toothed rotator – 2 loading arms Cutting head equipment: – Automatic device for setting the cutting thickness – Electric adjustment of the head height: up/down – Electric forward/backward feed of the head, with continuously adjustable speed – Electric blade guide arm – Hydraulic blade tensioning system with air cushion – Bark remover

Condition: good (used), functionality: fully functional, Primultini 1300, fully functional and in very good working condition. Tedpfx Aps Ahdv Ssdjd

Condition: used, Year of construction: 1989, For sale: Todpfs Ag Nuaex Apdjd Complete material handling system from a sawmill, manufactured in 1989, from Möhringer. - Log infeed system - Roller conveyor with cutoff saws - Transverse conveyor - Vibrating conveyors, approx. 45 m - Double scraper chain conveyor with two discharge points The material handling system has already been dismantled and can be inspected on site. Dimensions can be taken from the layout plan. Inspection required!

Condition: used, Year of construction: 2022, functionality: fully functional, Used horizontal ZENZ block bandsaw line, type BN 110 S, with complete conveying system, stationary. Automatic infeed system with log feed-in device, control panel for the block bandsaw, with cutting program and conveying system for the removal of cut material, including a sorting conveyor. Year of manufacture: 2007; general overhaul in 2022 Conveying system year of manufacture: 2022 Manufacturer's number: 141-8300 Equipment: • 22kW drive motor • 7m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 leveling supports with clamps (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • PLC on the left - joystick on the right • 1 Zenz sharpening machine, type AHB (factory number: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water lubrication system with 20l tank and nozzle o Mounted on the blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifting preparation in the frame o With control unit o Holder for pipe o Two holders for cylinders • Ejector, hydraulically operated, for 820mm frame Tedpfx Ae Adr Uvopdsd • Green laser indicator, horizontal Mechanization consisting of: • Folding frame, hydraulically operated, for removal at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors run simultaneously • Roller conveyor, 4m long, slightly inclined with stop o All electrical and hydraulic elements can be operated from the control panel The block bandsaw, including the conveying system, is fully operational. If required, we can provide support with dismantling and assembly.

Condition: like new (used), Year of construction: 2014, operating hours: 2,808 h, functionality: fully functional, input voltage: 400 V, overall weight: 3,760 kg, intake manifold diameter: 200 mm, noise level: 75 dB, actuation type: manual, The machine is in like-new condition. Tedpfx Asz R Uf Hspdod It has only 2,880 operating hours. It can also be inspected while in operation.

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. Tjdpfjzagkzex Apdjd SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Year of construction: 2012, condition: good (used), cutting height (max.): 350 mm, neva orbit plus 350 mm, with numerous frame saws and grinding machines. Tsdpfez R Uvxex Apdsd

Condition: used, Year of construction: 2022, Manufacturer: SERRA Maschinenbau GmbH, Germany Type: Log band saw (Block bandsaw machine) Todpfx Ape Aful Hsdsd Model / Type XE135-6-S / XE135 Year of manufacture: 2022 Material number / factory number: XE135-2022-1750 Identification number: W09XE6060NESD1750 Power supply: 3-phase, 400 V, 50 Hz Current (from nameplate): 70.8 A Operating pressure: 180 bar Weight: 5350 kg Catalogue specifications XE135: Basic cutting length: 6 m Nominal log diameter: Up to 135 cm Cutting width: 100 cm Clearance above / below the blade: 50 cm / 111 cm Blade wheel diameter: 800 mm Blade width: 120 mm; also 140 mm Blade length: 5520-6030 mm, depending on the setting Blade thickness: 1.1 or 1.2 mm Tensioning mechanism stroke: 300 mm Guide / guard opening: Hydraulic Head height adjustment: Electric Head feed: Electric / hydraulic Log handling: Hydraulic Frame: I-beams 300 mm; steel supports 20 mm Wood support surfaces: Stainless steel Catalogue performance: 33 m³ / 8 h Seller contact: 571*326*804 Machine currently operating in Poland.

Condition: good (used), STRAVIS SAWMILL LINE – TWO-ARBOR MULTI-RIP SAW + FEED AND ROLLER TABLES + CENTERING DEVICE For sale: a complete set of machines and equipment for wood processing, designed for use in a sawmill. The set includes: - STRAVIS PW 16.5 two-arbor multi-rip saw, - two main motors with a power of 55 kW each, - equipment for destacking wood, - feed tables, - roller and conveyor tables, - centering device for positioning the material before cutting, - other components of the line as shown in the photos. Tedpfxs Afqzqe Apdod Multi-rip saw specifications: - Manufacturer: STRAVIS – Arkadiusz Pankowski - Model: PW 16.5 - Year of manufacture: 2020 - Serial number: 1063 - Main motor power: 2 × 55 kW - Maximum cutting height: 165 mm - Industrial power supply The multi-rip saw is designed for longitudinal ripping of wooden prisms into boards and edge boards. The two-arbor design allows for the simultaneous use of saw units on two arbors. The set is sold as a whole. This is an offer for a sawmill planning to expand or upgrade its production line. The visual condition and completeness of the individual components can be seen in the attached photos.

Year of construction: 2001, condition: good (used), Edge trimming machine for hardwoods/African woods, B.F.B. Model WKCP 6, year of manufacture 2001, CE-compliant, complete with parallel fence and automation system for loading and unloading. The system is fully functional. Todpfx Ae Agyqbopdjd

Condition: excellent (used), Catalog number: 7502 TECHNICAL DATA Infeed carriage DTBC-P Wheelbase 750mm Diameter of the infeed material 100-800mm Total side travel 160mm Log rotation to the left and right 360 degrees Tsdpfx Aj Af Uyvepded Forward and reverse travel speed variable Hydraulic pump motor power 5.5kW Auxiliary carriage DTCB Wheelbase 750mm Side travel range 160mm Log rotation to the left and right 360 degrees Side travel motor power 1.1kW Infeed carriage dimensions (L/W/H) 2850/1400/1500mm Auxiliary carriage dimensions (L/W/H) 950/650/750mm Total weight 1450kg ADVANTAGES – Made in Poland – Robust construction – Includes cables and chains – Used machine, very good condition, after a major overhaul (invoice available for inspection) PRODUCT FEATURES The auxiliary carriage is designed to support logs or stacks from the infeed side of the saw, with a diameter range of 100 mm to 750 mm. The infeed carriage is designed to feed logs and stacks to the saws, with a diameter range of 100 mm to 750 mm. The device for manipulating logs, namely for clamping the log in the clamps, performing transverse movement, and rotating the log, is powered by hydraulic drives. Net price: 59900 PLN Net price: 13930 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used for informational purposes only, to identify the product. We only resell products that the manufacturer has previously introduced to the market. We have no business ties with the manufacturer.

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. Tedsyxhq Uopfx Apdjd The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Linck Conveyor Technology for Gate Saws - Splitting wedge with drive - Tensioning carriage Tedpfx Apj Ag Rchodod - Auxiliary carriage Prior inspection required!

Condition: excellent (used), Year of construction: 2004, operating hours: 10,500 h, functionality: fully functional, power: 300 kW (407.89 HP), Wood chipping system BRUKS BK-RH485 – Year of manufacture 2004 For sale is a powerful wood chipping system, BRUKS BK-RH485, ideal for the industrial production of wood chips. The system is in good working order and has been regularly maintained. Technical data Model: BRUKS BK-RH485 Max. log diameter: 485 mm Min. infeed length: 1,500 mm Max. infeed length: 5,500 mm Rotor disk drive power: 315 kW Wood chip length: approx. 25 mm Tsdpjz Tzrksfx Apdjd Capacity: 80–100 m³/h Operating hours: approx. 12,500 Year of manufacture / Commissioning: 2004 System no.: H4224653 Equipment & Components Step feeder Infeed belt Metal separator / metal detector 2x discharge augers (BRUKS): 600 × 6,500 mm 800 × 9,500 mm Control cabinet / control units Description The BRUKS BK-RH485 is designed for high throughput and heavy-duty industrial applications. Thanks to its robust construction and powerful drive technology, it is ideally suited for the production of homogeneous wood chips. The integrated metal separation and reliable feeding technology ensure safe and efficient operation.

Condition: good (used), Year of construction: 2003, functionality: fully functional, JOCAR JMT-700 Debarker Todpfx Aez Dxpyspded Year of manufacture: 2003 Technical condition: good – machine fully operational Debarker for logs with diameters from 130 to 700 mm.

Condition: good (used), Year of construction: 2000, Equipment: crane, Baljer & Zembrod OB/19V-LA – wood sorting crane, 2000. Price: 70,000 PLN net. For sale: a device for handling, sorting, and transferring roundwood, manufactured by Baljer & Zembrod. Technical specifications: Manufacturer: Baljer & Zembrod Model: OB/19V-LA Crane type: OBX II Year of manufacture: 2000 Chassis number: 1593 Maximum crane reach: 13.2 m Lifting capacity at maximum reach: 2200 kg without grab Operator cabin with air conditioning Drum for winding the power cable The device is designed for use in sawmills and wood storage yards. Price: 70,000 PLN net. Tsdpfxoz Nwxxs Apdsd Inspection possible by prior arrangement. More information available by phone.

Condition: good (used), functionality: fully functional, Multi-blade saw H 33. Chain bed width 250 mm. Maximum cutting height 100 mm. Tedpfx As Af Im Nepdod Feed rate, continuously adjustable up to 25 m/min. Drive motor 22 kW. Double anti-kickback protection. Includes a wide range of accessories, such as bushings, spacer rings, and saw blades. Ideal for cutting stacked strips.

Year of construction: 2009, operating hours: 1,629 h, condition: excellent (used), functionality: fully functional, Technical Description – Wintersteiger DSG Sonic Main Features: - Designed for thin-cutting of boards and panels in lamella/parquet production. - High-precision blade guidance without tolerances (no "play"), ensuring improved cutting accuracy. - Symmetrical saw frame construction provides uniform blade tensioning. - Revolutionary drive concept with servo-controlled precision feed. - High stroke frequency of the saw frame: 550 strokes/minute. - Modular and ergonomic design: split construction for easy access and simple maintenance. DSG Sonic — Maximum element cutting height: - For 380 mm saw: cutting height 30–88 mm (or 45–88 mm, depending on configuration) - For 420 mm saw: cutting height 30–128 mm (or 45–128 mm) - For 500 mm saw: cutting height 80–210 mm (or 45–210 mm) - For 550 mm saw: cutting height 80–254 mm (or 45–254 mm) Tsdpfx Apjx Avzysdsd Machine specifications and requirements: - Machine weight (basic unit): approx. 3,000 kg - Dust extraction/exhaust: two connections required — Ø 120 mm and Ø 150 mm; extraction capacity: approx. 3,200 m³/h (air velocity ~ 30 m/s). - Compressed air pressure: minimum 6 bar; air consumption: approx. 200 l/min. - Lubrication: central lubrication system with guideway monitoring. - Machine year: 2009 - Operating hours: 1,629 - Condition: very well maintained.

Condition: good (used), Year of construction: 2000, operating hours: 40,000 h, functionality: fully functional, track width: 3,000 mm, Equipment: crane, low noise, BZH sorting and cutting trolley. Track gauge: 3m. OBX 2 crane. Tsdpjzycf Tofx Apdjd Lifting capacity at 13.20m: 2200kg without grapple. Chainsaw on the right side. Crane positioned in front of the cab. Grapple. Sold separately.

Condition: like new (used), functionality: fully functional, Log sorting line with 4 pockets, 2 on each side. Material diameters 100–500 mm, lengths 3–5 m. Log deck 12 m: new Step feeder: new Todpoz Dtchjfx Apdod Receiving conveyor, 10 m: refurbished Pockets, 13 m: partly new Electronics: new Hydraulic system: new