Used Destacking device for sale (65)

Year of construction: 2012, Condition: ready for operation (used), Machine no: 483 Year of manufacture: 2012 Technical data Belt length: 3900 mm Belt width: 1350 mm Total width: 1900 mm Beb Hcsv Rpxfjyhqswl Max weight on belt: 400 kg Motor: 0.37 kW, 50 Hz, 380 V, 3-phase Stock number: 2002452BXA

Condition: excellent (used), Year of construction: 2017, Vacuum lifter from Schmalz for heavy panels with new suction cup rubber. Load capacity 150 kg horizontally and vertically. Suction cup can be motor-pivoted 90 degrees. Suction box 1000 x 675 mm. Acoustic warning signal if vacuum is too low. 400 V, 1.5 kW. Can be attached to an on-site chain hoist. CE mark. Bob Hcjv S Syneyhqswl No inspection booklet available. Suction cup rubber replaced. As good as new. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See "Other offers from this supplier."

Year of construction: 2007, Condition: used, Extra-flat lifting table Load capacity 1250kg 2 units available 380V Beb Hcewfh Tcoyhqewl

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Bwjb Hcyhowbp Nweqol Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: good (used), Automatic board stacker for use after a moulder, resaw, crosscut, double end tenoner etc. Bsb Hcyhjr E A Euoqswl Pack size up to 6,5m x 1,2m x 1,2m high. Capable of stacking 10 layers per minute.

Condition: like new (used), Year of construction: 1999, Functionality: fully functional, input voltage: 400 V, frequency: 50 Hz, LITTLE BUFFER TABLE PERFECT CONDITION Beb Hcowcp Ehoyhqjwl (Can be converted for other side) Option Conveyor belt 4m

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 031001-1, 3 Sicko STM 80 stacking units Bwjbsumxb Ro Hcyhqel Data see photos (data sheet) If you have any questions, please contact Mr. Klaus Schmidt by telephone only.

Condition: ready for operation (used), Tilt destacking for layer separation Stacking lath separator with conveyor belt Layer transport to the layer buffer Bob Hcyhjuzht Tsqswl Layer buffer with separation before feeding unit Layer patterns for the two separated timbers including transfer belts, for example to the stacking machine

Condition: used, Automatic stacker Motorized feed rollers Coin counter 380V Bwjb Hcyhewfh Rzsqol

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Bwebet Ty A As Hcyhqol Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Year of construction: 2001, Condition: good (used), Functionality: fully functional, Pinomatic cross conveyor for a planing and sawing line Year of manufacture: 2001 Bwjb Hcyev S Hfxohqsl Manufacturer: Pinomatic OY Type: POS 9+10 S/N: P1033 Motor-driven cross conveyor with 7 chain hoists Arm length: 6000mm Cross conveyor width: up to 4000mm (adjustable) Height: 900mm 6 fixed chain hoists 1 adjustable chain hoist Voltage: 230/400VAC

Year of construction: 2024, Condition: as good as new (ex-display), Weinig Stacker for long boards Min length 1500mm Max Length 6000mm Machine is under total rebuilding and will be like new. All hydraulic Systems are changed to Electric motors New control panel sand blasted and repainted. Machine comes with brick stacking option Bebounaw Ns Hcyhqswl Work in progress New photos as i get along.

Year of construction: 2017, Condition: excellent (used), Return System for panels durable...customized...space-saving...low maintenance The intelligent solution for returning the panels around the edge banding of all manufacturers Working fild L 9 500 mm. x W 6 500 mm.. Functions: Workpiece recirculation Rotation 0° - 90° - 180° Parts measurement Destacking function incl. stacking building (only Return 02) Manual mode for oversize-panels Parts dimension Largest part 4100 x 1300 mm Smallest part 300 x 80 mm. Load max 150 KG *The surface must be smooth, closed, impermeable and without cutouts! Energy supply Electricity 400V / 20 Amps. Pressure air 300 - 420 NL/min System properties Stacking height 800 mm. Movement speed up to 120 m/min Cycle time - max. 8 cycles/min; transport from removal station to return belt lower cycle times in case of destacking. 3-axis manipulator for part transport with vacuum cycle time: 8 - 15 seconds depending on travel distance pick up with suction pads - max. 150kg movings: turning 0° - 90° - 180° pick up of parts and delivery on belt conveyors or roller conveyors stacking possible colour: RAL 7035 portal lenght 9,5 m steel construction to support bridge, incl. Steel posts and crane runway, energy supply via energy chain and installation material Beb Hjv Raggjcyhqswl Cgs2Kb3Bqi portal width 6,5 m bridge made of aluminium profile, with double sided tooth belt drive, master/slave control incl. Energy supply via energy chain. Made by Barbaric Made in Austria The company has now changed the lay-out therefore this Barbaric stacker is not needed any longer. The machine can be inspected at any time here in Norway. New price in 2017 was 198 000 euro. Now only 30 000 euro. Excellent condition. Request more information DOCUMENTS 17776136.docx (Word)

Condition: good (used), Lenght with arm at 0 point 0 - 3400 mm Bjb Hcyev Nzglohqewl Lenght with arm max opened - 4100 mm Width 1400 mm Weight 1000 kg

Condition: used, Year of construction: 2010, machine/vehicle number: 13820, - Manufacturer MAKOR - Type. CSRT, Loader Bweb Hcjumvtwsyhqel - Year of construction 2010 - Max. Part width 180 mm - Min. part length ~ 1,000 mm - Max. Part length ~ 6.500 mm - Length of the longitudinal conveyors ~ 6500 mm - Distance between the lifting rakes centre - centre 400/530/700/770/1150/1270 mm - Length ~ 6.500 mm - Weight 750 kg - Incl. control unit - In stock in Blomberg

Condition: excellent (used), TURNING DEVICE FOR PANELS (FROM CROSSWISE TO LENGTHWISE) Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) Bobjfi Tmte Hcyhqewl To turn at 90° panels (workpieces) from cross sense (cross-wise) to longitudinal sense (length-wise) Built-in electric and command panel 1st Table (crosswise) with motorized rollers Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (lengthwise) with motorized rollers Min dimensions of the panels (mm) 250 x 320 (ca.) Max dimensions of the panels (mm) 1300 x 2100 (ca.) Min/Max thickness of the panels mm 10 / 50 (ca.) Total installed motor power Kw 3,5 (ca.) Total length of the machine mm 3300

Condition: ready for operation (used), Functionality: fully functional, For stacking planed goods (was used after a planing system that delivered 150 m/min) Individual components 1. strip separator / cross conveyor (HIT) 2. cross transport with hook conveyor and turner (HIT) 3. separating/clamping unit (Weinig) 4. stacking machine (Sicko) Bwjb Hcyhjvi Nndeqjl 5. 2x roller conveyor TECHNICAL DETAILS Working height: 2.7 m Planed goods dimensions: 17 x 75 x 2,000 - 80 x 200 x 6,000 mm Package dimensions: max. 1,200 x 1,200 mm Output: 20 parts/min

Condition: new, Year of construction: 2025, Automatic stacker with hydraulic lifting, ultra-high performance and super reliable, precision, safety, versatility. Bwjb Hcyev Hp Tnjhqel

Condition: used, Year of construction: 2013, Angle transfer 180°, manufacturer Venjakob VEN TRANS Technical data:- Type. VEN TRANS - Manufacturer: Venjakob - Year of construction:2013 - Max. part length: 5.500mm (part length 6,000mm on request) - Infeed roller conveyor Length: 6100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Infinitely variable feed rate - Cross transfer with carriage and lifting rake - Lifting-lowering, pneumatic - Length of transfer arms: 4600 mm - Number of rakes: 43 pieces - Distance between the rakes 140 mm - Outfeed roller conveyor Length: 6,100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Bwob Hcyhjuu Shyjqel Feed infinitely variable - Connected loads: - Electrical: 400 V, 50 Hz, 3 phases - Location: At the warehouse in D-32825 Blomberg

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric cabinet and command panel Total installed motor power KW 3,5 (ca.) Bebofi Trij Hcyhqswl 1st table (longitudinal) with motorized rollers Motorized turning device, with double cone (1 top + 1 bottom) 2nd table (cross) with motorized rollers Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 2100 (ca.) Min/Max thickness of the panel mm 10 / 50 (ca.) Total length mm 5680

Condition: excellent (used), DOUBLE LOADER, (DOUBLE CAGE) Bobebgcgge Hcyhqowl CE mark Composed of 2 single loaders (one at right and the other at left of the central rollers table) - Motorized rollers table (between the two single loaders) - Built-in electric cabinet and PLC command panel - Total installed power KW 16 General features of each loader: - Vacuum system - Top holding bars deplacement of 180° (horizontal sliding movement) - Horizontal bars for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (metal grid door) Working capacity (cycles/minute) 15 ca. Workpieces thickness (min/max) mm 12 - 60 Minimal workpieces dimensions mm 240 x 240 Maximal workpieces dimensions mm 1200 x 3000 Total installed powe Kw 16 x 2

Condition: like new (used), Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from cross sense (crosswise) to longitudinal sense (lenghtwise) Separate electric and command panel (unique with QZ0170A) 1st Table (cross) with motorized rollers (mm 2200 x 1850 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 4800 (ca.) Bob Hcyhjc Ux Tmsqewl

Condition: like new (used), Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Separate electric and command panel 1st Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers (mm 2200 x 2550 ca.) Bjb Hcoc Ux Tleyhqewl Total installed motor power Kw 4 Total lenght of the machine mm 5500

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°). Dimensions mm 7168 (ca.) Bjb Hcod Rg Dzoyhqewl Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 20.8

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) Bwsb Hcsd Siydjyhqjl 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3