Used Carpentry machines for sale (56)

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, RANDEK REVOLVING CROSS CUT SAW Dq0Mof

Condition: good (used), Year of construction: 1997, Functionality: fully functional, I am selling the Mafell SE 400 slotting device with 2 rails and 2 chains (9 and 11 mm), but without the LS 102 chain mortiser. The device is not compatible with the newer LS 103 chain mortiser. I can ship it in a wooden box (cost 50/50), or we can meet halfway. 2Ezprvsuu

Condition: new, Year of construction: 2015, Carpentry plane new device Osbrmbrm Year of construction 2015 from dissolution The innovative chip ejector with excellent chip removal thanks to increased air flow and innovative air guidance banishes blockages caused by wet wood shavings to the past! The solid cast construction weighs only 13.2 or 12.5 kg thanks to its consistent lightweight design. The powerful MAFELL alternating current motor offers sufficient reserves. Planing becomes an experience! As with most MAFELL machines, the intelligent control electronics keep watch in the background. For soft start and constant speed under load, as well as for a machine-friendly speed reduction when idling and for overload protection. Scope of delivery 1 reversible blade, 1 pair of carbide steel; order no. No. 091696 1 open-end wrench 8 mm; order no. No. 093258 1 connecting cable 4 m; order no. No. 087323 Planing width 248 mm chip removal 4 mm in cardboard box Technical data chip removal0 - 4 mm Planing shaft Ø74 mm Nominal idle speed8500 1/min Rated power consumption2300 W Universal motor230 V / 50 Hz Planing width Weight18.3 kg Availability: short term Storage location: Hochheim

Condition: good (used), Year of construction: 2006, Functionality: fully functional, P-MAX 23/5+UNIV Futura Moulding machine, almost new. It has not been in operation for 9 years. Four-sided planer/moulder P-MAX 23/5+UNIV, year of manufacture 2006. 6 spindles: down - right - left - up - down - universal. Electronic programming of working width, working height and feed speed. Max. element 230x170mm All 6 spindles at 6000 rpm. Material pressure for short elements. Bskivt9Obu8 Total weight 2500kg. 1 zone pneumatic material pressure system for feeding.

Condition: good (used), Used joinery machine on behalf of a customer Manufacturer Mafell Type ABA joinery machine 12m Package Sniehyylc With additional Mafell machines shown -Drill with frame -Handheld circular saw -Chainsaw -Transport trolley The machine can currently be viewed while still powered. ATTENTION Item location: Leipzig Sale from foundation.! Dismantling must be carried out by the customer. Forklift can be provided. The right to sell the machine prior to delivery is reserved. It is possible to have the items for sale examined by an expert on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of manufacture, condition are non-binding and have been provided to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold from the location / warehouse, with the risk passing to the buyer there, this also applies to any shipment by us that we have carried out on your behalf. This offer is only aimed at traders, dealers and legal entities. The company names and trademarks given are the property of their owners and are used only to identify and describe the products. The assembly and electrical connection of the machine/device must be carried out or checked by a trained specialist. Also take a look at my other offers. The item MUST be paid for and picked up within 14 days of the invoice being issued, unless otherwise agreed. Otherwise, the costs for storage must be invoiced.

Condition: ready for operation (used), Sell an indestructible Makita carpentry cutter model 2516 with mint condition milling cutter for dovetailing and flattening Technical data - 1430 watts - 110 volts - 12000/ min The milling depth is 60mm, beams with a width of up to 320mm can be clamped. Of course, a depth stop is available, which can be adjusted quickly and without tools. With the hand crank the position to be clamped can be adjusted very fine. As the milling cutter is clamped on the beam, there is no need for a Danger of diving in at an angle or at an angle. By means of a hand lever the mortiser can "wander" along the beam and thus helps to achieve very precise position. As you can see on the pictures, the device is in best condition and also optically still excellent. The construction is well thought out and very stable. International shipping is possible - international shipping is possible Npjhx

Condition: as good as new (ex-display), Year of construction: 2000, The machine was put into operation only for 2 weeks. The machine is practically new and unused. Ccl37Ogpyn

Condition: new, Year of construction: 2025, Functionality: fully functional, 5 KW 7.5 HP 1 Hydraulic feed brake Cutting height 200 mm Can be tilted up to 60° to the left, up to 30° to the right by means of a hand crank from the front Cutting height at 45° inclination 140 mm Cutting width 420 mm Cutting width at 45 ° tilted 290 mm swivels up to 60 degrees to the left, up to 45 degrees to the right Bcomlrirh0 incl. saw blade for wood 6,000 mm heavy-duty unloading roller conveyor, mounting side left, stop slider can be adjusted from the machine with handwheel, pneumatically lockable, length can be read digitally, digital display in 230 volt version 4,000 mm heavy-duty feed roller conveyor, attachment side right Machine can be tilted from the front on both sides via hand crank and worm gear, hydraulic feed brake Various options available on request, e.g. greater cutting height and material tension and laser cutting display

Condition: used, Year of construction: 1991, Functionality: fully functional, Carpentry tenon cutter RYOBI HW-15 DX 400 volts 2.2 kW Year of manufacture 1991 Clamping dimension max. 200 mm with length stop Dqvwlb Support for diagonal cuts e.g. headbands Saw blade Ø lengthwise 350 mm Saw blade Ø crosswise 220 mm Tenon thickness 0 - 120 mm, paneling up to 120 mm Dimensions 3000 x 1000 x 2000 mm

Condition: new, Year of construction: 2024, crosscut and mitre circular saw with maximum cutting height of 170 mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 65° horizontal readjustable fixed stops lower saw blade protection connectable to suction unit Modell-----Motor-----Drehzahl-----Schnittlaenge ZS 170: 400 V / 2,0 KW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Horizontal mitre range ZS 170 ----- 170 mm----- 45 degrees -90 degrees Modell----- Saegeblatt-----Absaugstutzen-----Gewicht ZS 170 -----420 mm----- 100 mm ----- 120 kg Accessories on request: Roller conveyor / length gantries type RO, RL, RLK, RLH and RLHK for machining aluminium and PVC profiles and for wood profile board machining. Jialhpz the modular roller conveyor system can be supplied as: 3 m type RO: infeed roller conveyor with min. 2 support feet 3 m type RLK: roller conveyor length stop with backwards folding stop slide - machine stand - Main switch lockable - Feed roller conveyor Ro-St60 3 meter right side - roller conveyor RLK-ST60 L 3,0 meter measuring length Length stop/roller conveyor heavy version mm - scale at the rear beam, caliper gauge with magnifying glass and stop flap - Saw blade 420 x 3,5 x 40 Z 84 Neg Location: ex stock 54634 Bitburg - free on truck - - immediately available- Location: Ex stock 54634 Bitburg - free on truck - - immediately available-

Condition: new, Year of construction: 2024, Functionality: fully functional, cutting height (max.): 160 mm, saw blade diameter: 600 mm, cutting width (max.): 610 mm, power: 0.01 kW (0.01 HP), Extreme robustness and maximum power! The Legend_600 has a completely painted, thick and reinforced steel structure. 2Jvdft7 The blade with a diameter of 600 mm, the power of 9.2 kW and the rotation speed of 2750 rpm make it the ideal machine for those who work with wood up to a maximum of 150 mm thick and 610 mm wide.

Condition: new, Year of construction: 2024, operating hours: 1 h, Functionality: fully functional, BOOSTON - Manufacturer of machinery and equipment for the prefabrication of frame houses. We offer a production line consisting of two tables and a transport bridge. 1. first assembly table - ER-01H/900 with a length of 9m - Table drive - hydraulic cylinders, hydraulic pump - Total width - 360cm (including 300cm plate) - Permissible load - 100kg/1m2 - solid powder coated steel construction - holes for SD-01 pressure cylinders ( 3 pcs in the set) 2. receiving table ER-05H/600 (6m) - on wheels - to be transported with a hook (pulling or pushing with a forklift) - Mobile table that allows further processing of prefabricated elements in another place Bsgafxc2G2K - Total width 230cm - Working height 70cm - 360-degree rotating wheels 3. transport bridge - MT-01 - load capacity up to 800kg - 360-degree rotating wheels

Condition: good (used), Year of construction: 1986, Functionality: fully functional, machine/vehicle number: 101 152, nominal power: 1.6 kW (2.18 HP), overall weight: 19 kg, motor voltage: 380 V, cutting height (max.): 280 mm, cutting depth: 230 mm, cutting width (max.): 200 mm, rotational speed (max.): 1,400 rpm, Hema hand band saw ZS 20. In the past, the machines were mainly used to profile purlin heads. Overall, the machines were used very little, as the profiling of roof timbers was no longer desired by customers. The machine shows signs of use, but is not damaged. Jo27Mnaic The machine is now for sale because it has been discontinued due to its age. The price is ex warehouse Tannheim. However, it would be possible to send it if the costs are covered.

Condition: new, Year of construction: 2025, Functionality: fully functional, Technical data: Paapupis Cutting height 200 mm Cutting height at 45° inclination 140 mm Can be swiveled to the left up to 67 Can be swiveled to the right up to 45 5 KW 1Hydraulic feed brake Cutting length 420 mm at 90° position Cutting length 45° tilted - 295 mm Tiltable to the left 60 °, tiltable to the right 30 ° The tilt is adjusted from the front using a hand crank. 1 saw blade for wood, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounting side left. The fence is adjusted from the front using a hand wheel. The length can be read off digitally to the nearest millimeter. The stop is locked pneumatically. 1 digital display in 230 volt version 1 heavy-duty feed roller conveyor, attachment side right, length 4,000 mm Machine length 11,700 mm Completely mobile Machine packed on planks Pictures show a customer's machine.

Condition: new, Year of construction: 2024, cutting height (max.): 130 mm, warranty duration: 36 months, Description: - Now concentrated power and high torques have a name: CUprex the high-performance motor with performance-optimized digital electronics and newly developed control technology. The speed can be infinitely adjusted to suit different materials and applications. - For optimum handling and better control, the circular carpentry saw is equipped with soft start, constant speed under load, speed reduction and overload protection. - The design of the MKS130Ec impresses with its extremely robust and high-quality materials, such as the lightweight die-cast magnesium housing or the impact-resistant, glass fiber-reinforced plastic parts. The closed design offers little contact surface for dust or chips. - The MKS130Ec feels at home in all applications of a classic or modern carpentry workshop: cross and longitudinal cuts in wood or insulation materials can be mastered effortlessly thanks to the right accessories. - Play it safe: with many useful details such as the motor brake or the self-closing protective cover. The on/off switch also has a centrally positioned switch-on lock. Advantage: - Ergonomically positioned handles - for maximum operating comfort and efficient work in all situations. - With infinitely variable speed adjustment - for individual requirements and applications. - The cutting depth can be set precisely and easily - thanks to the rotary dial with easy-to-read scale. Areas of application: - Cross and longitudinal cuts - Diagonal cuts up to 60° - General joinery work, notch cuts - Use of materials e.g: Solid wood, glulam, insulation material, sandwich panels Technical data: Universal motor: 230V/50Hz Rated power consumption: 2,500 watts Nominal idle speed: 1,000-2,000 rpm Cutting depth: 50-130mm Dqqryf Cutting depth at 45°: 37-94mm Cutting depth at 60°: 25-65mm Swivel range: 0-60° Weight: approx. 12kg Scope of delivery: 1 x carbide saw blade Ø330x2.2/3.2x30mm Z24WZ (092571) 1 x rip fence 1 x hexagon wrench 6mm (093081) 1 x connection cable 10m (087612)

Condition: new, Year of construction: 2024, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Ct9Thzbqo9 Picture: similar. Machine is still in original packaging

Condition: used, Year of construction: 2021, Functionality: fully functional, Special offer, reasonably priced Randek butterfly turning table, 12 m little used, year of construction 2021 Element length max. 12 m Element height max. 3100 mm Element weight max. 1.5 t Pneumatic pressing device Hydraulic erecting function 25 % below new price! Czmifiexjy Only EUR 43.500,-- plus freight Delivery time: Immediately ex works Subject to prior sale

Condition: new, Year of construction: 2024, operating hours: 1 h, load capacity: 3,500 kg, worktable length: 9,000 mm, Butterfly/rotary table with a length of 9m - a set consisting of two wings. BOOSTON - we are a manufacturer of machines and equipment for the prefabrication of wooden technology houses. Buy a machine directly from the manufacturer! Quality guarantee, short delivery time. Gq3Ssfcd9 We offer an assembly table - lifted (butterfly table) consisting of two wings with a length of 9.0m (models available from 6m to 12m). - Table drive - hydraulic cylinders, hydraulic pump - First wing with a total width of 360cm - Second wing with a width of 230cm (with the possibility of extension) - permissible load - 3500kg for one wing - solid powder-coated steel construction

Condition: excellent (used), Year of construction: 2009, BIESSE ROVER C9.65 FT Conf 2 MACHINING CENTER XP6OO control system entirely PC-based - Division into 2 shaping areas and 8 X-blocking zones 2 300m3/h vacuum pumps - Configuration 1 X=6450mm Y= 1860mm C2-A1 composition 12kw electro-spindle, Iso30 air-cooled socket -360° pivoting operator device - C axis 10-position revolver tool magazine on Z carriage Eskhvd8Fd Predisposition for mechanical copier - 5 ISO30 tool holders with spring clamps Automatic lubrication system - Diagnostic video - Oil bath sawing unit for 215mm blade Extra charge for extension of reticular work surface to 2100mm in Y direction

Condition: new, Year of construction: 2025, Functionality: fully functional, 5 KW, 7.5 HP, mobile on sturdy swivel castors Bcomohdd3D Cutting height 200 mm, 1 hydraulic feed brake Cutting height at 45° 140 mm Can be swiveled to the left up to 60 Can be swiveled to the right up to 45 Cutting length 420 mm at 90° position Cutting length 45° tilted - 300 mm can be tilted 60° to the left, 30° to the right by means of a hand crank from the rear (also from the front on request) 1 saw blade 520 x 4.4 x 50 mm 60 WZ neg. left roller conveyor with scale and stop slider, length 2000 mm to saw blade machine length 4000 mm 1 piece roller conveyor extension with scale and 2nd stop slide Mounting side left, length 4000 mm. In this extension roller conveyor there is also an extendable measuring rod with stop, so that it is possible to precisely cut wood on the left side to a length of 7500 mm. 1 feed roller conveyor, attachment side right, length up to saw blade 2000 mm Total length with feed roller conveyor, left, 8000 mm, further options on request

Condition: used, Motor output kW cutting width mm Dqmmyh Weight kg mm Cutting depth mm Exhibition machineDescription:The new ZSX-TWIN Ec carpentry chainsaw is the practical solution for large-dimensioned wood components. MAFELL has created a new dimension with the development of the twin-engine chain saw, with which previously almost impossible and time-consuming work can be implemented effortlessly and accurately. With a rated power of 3000 watts, even one CUprex motor brings the 230 V mains to its power limit. Two CUprex motors at the same time would bring any simply fused lighting power supply to its knees. If the power is distributed over two circuits, the two-motor ZSX gets the power it needs. This is precisely the power grid that offers us, since here the phases are fused separately from each other and the grid is therefore not antage Benefit:Thanks to the use of light current technology, the ZSX TWIN weighs only 20 kg with 6,000 watts of rated power. This enables it to make longitudinal cuts up to a cutting depth of 400 mm! In wood construction and solid wood wall cutting, corner cuts are often necessary. Thanks to the vertical cutting tool, cutouts and overlaps can be made quickly and accurately. Time-consuming turning of the wood components is no longer necessary. At the heart of the ZSX-TWIN Ec are the two 3,000-watt luminous flux motors. They are operated in parallel on two 230 V phases from the power grid. The ZSX can be swiveled from -15° to 60° exactly according to lication:Longitudinal and cross-sectional cutouts Material use e.g.: Solid wood, glue laminated beamsTechnical data:Cutting depth 400 mm Cutting depth at 15° 386 mm Cutting depth at 30° 346 mm Cutting depth at 45° 282 mm Cutting depth at 60° 199 mm Swiveling on both sides -15° - 60° Cutting width 6.8 mm Rated idle speed 21000 1/min. Nominal input 2 x 3000 W Weight 20,0 kgScope of delivery:1 Chain saw ZSX TWIN Ec 1 Longitudinal cutting chain TWIN HM 400 No.: 006977 1 Fine cutting chain HM 400 No.: 006972 1 Transport carriage ZSX-Twin Ec No..: 205940 1 Glider for guide bar insert No.: 205934 1 Rip fence No.: 204591 1 Combination screwdriver 6 mm No.: 093272 1 Open-end wrench 13 mm No.: 093008 1 Connection cable 10 m complete with CEE plug 400 V No.: 087906

Condition: like new (used), The company sells woodworking equipment: Planer Powermat 500 + Rondomat 960 + Heads Planer Powermat 500. Combined use of conventional tool and PowerLock spindles -Working with up to 230mm, height up to 120mm -Max. feedrate up to 30 m/min, optional up to 36 m/min Chpjovw9Ip Weinig Rondomat 960. With Comfort set and radial locking system for sharpening straight knives. -Manual sander for profile and straight line sanding. -Grinding wheel diameter min./max.: 150 mm / 225 mm, width: Ceramics 5 mm, Borazon 10 mm, Grinding wheel hole: 60 mm -Grinding wheel drive: 1.1 kW Gluing presse with glue applicator - Buetfering laminating press - Gluing press for window scantling / door skirting production - Working / pressing length max. 6000 mm; height max. 1.050 mm (without allowances); depth 160 mm - Overall length 7500 mm Double side cylinder glue spreader LISY DVORAK NL2 270 - Machine length: 1150mm; height: 1330mm; width: 830mm; Weight: 110 kg Optimizer GreCon Dimter OPTICUT 204 R - Cutting width max mm: 200; Cutting height max mm: 80 - Input feed: chain feed; Output feed: belt feed Universal tool sharpening device Vollmer Uws 71 U Dornhan -The maximum diameter of the workpiece is Ø260 mm -Length between the workpiece holder and the rear support: max 450 mm -Movement of the compression table: longitudinal: 300 mm, transverse: 220 mm Bernardo-Cl 1300, wood lathe -Distance between centers: 1300 mm -Machine size (W x D x H): 2100 x 700 x 1170 mm HB Cotes AS dehumidifier CR 3200T /2 500 Euro/ -Nominal capacity 3200 cbm/h All Equipment can be purchased separately Call for more information

Year of construction: 2023, Condition: new, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Bh7Kt99Smp Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Year of construction: 2023, Condition: new, Butterfly Table BS20 Randek butterfly table BS20 is an efficient tool when producing prefabricated walls, roofs, floors, gable ends in timber or steel frame. The tables can be used separate or placed in a line. High quality is achieved due to the clamping function that guarantees the squaring of the building component. The turning of the building element is done with a controlled automatic process. High productivity is achieved; the working table is optimized for prefabricated house production. Functional description: The following processes can be done in the working table / butterfly table: • Automatic turning of building component, the up raiser table raises and flips over the building component during a controlled process to the receiver table, and the building component is turned. • Squaring of building component, the pneumatically clamping function on the long side of the table presses the building component into a squared high quality building component. • The table is developed in order to efficiently perform the following processes: building of framework, put on and nail sheets, nailing of plastic of paper foil and insulation of building component. Technical description: • Length: Available in lengths of 6000, 7500, 9000 and 12000 mm • Width adjustment between 2250 – 3100 mm, the adjustment between different widths is easily done with a manual control • The tables are hydraulically appraisable up to 91 degrees • Pneumatically squaring function on the up raiser table on the long side, stoppers height 160 mm • The tables are covered with plywood sheets as far as technically possible, the sheets makes it possible to put on sub components and beams easily directly on the table • The tables are built in strong steel profiles • The working height of the tables is optimal 620 mm • Equipped with alongside c-profiles for possible placement of steer stoppers for beam placement • The tables are completely delivered ready for assembly with very simple installation process. The customer is responsible for supply of motor cover and switcher for hydraulic unit (3kW) • The tables are designed to make it possible to add a multi function working bridge with nailing or drilling function 0Dhlbzbu • The distance between the tables shall be approximately 1100 mm, depending on the thickness of the building component Security: • The machine is equipped with safety stop CE-marked Benefits: • Squared building components due to clamping function • Controlled and automatic turning of the building component • Ideal working height • Flexible adjustment in width

Year of construction: 2023, Condition: new, Randek Work Table BS10U with clamping device and upraise function The Randek work table BS10U is an efficient tool for priducing pre-fabricated walls. pedestals and gables in wood frame or steel frame construction. The high quality of the finished building elements is achieved through the pneumatic press device, which guarantees the straightness of the building elements. Functional description The following workflows can be efficiently implemented with this workstation: • Laying out the frame construction • Clamping the frame construction by means of pneumatic clamping device Laying in the longitudinal sides of a polite rectangular unit. • Laying and clamping of plastic or paper sheets. Technical description • Length length 7500 mm / 9000 mm / 12000 mm • Width setting between 2250 - 3100 mm easily and manually • Clamping function, pneumatic, optional hydraulic • Hydraulic upraise up to 80 °. • Height of the abutment 160 mm. • The table is, as far as technically possible, fully paved with plywood. This makes it possible to put the frame designs directly on the work table. • The table consists of a stable steel structure. Z3F2Cjf7 • The working height is an optimal 620 mm. • C-profiles in the longitudinal direction allow you to set stopps. • The table is ready for assembly and is easy to assemble. Safety • Equipped with emergency-off switch • CE compliant Advantages: • Rectangular construction components through clamping function • Controlled upraise of building elements • Ideal working height • Fast and efficient adjustable