Joinery machines for sale
Your location was not identified (Edit)
3000 x 12000 mm
with 10 pneumatic clamping cylinders
Bj0cvvpwlu
70 mm stroke
with cross bracing
with stop at front side
with transverse pressure unit
with 2 pneumatic cylinders 200 mm more
TENONER machine type BALESTRINI 2TAO and
MORTISER machine type BALESTRINI 2CAP
2z79qfhei
second hand machines
machines for production of chairs
NOT SEPARATE SALE
working conditions : Excellent , recondition
volt. 380/50 more
new
- max. Stammlänge 8000 mm
- min. / max. Stammdurchmesser 150 / 500 mm
- min. Stammdurchmesser bei manuellem Betrieb 130 mm
- max. Spanabnahme bei einer Umdrehung 50 mm
- max. Spanabnahme bei Weichholz [...] Kiefer 100 mm bei einer Umdrehung
bei Hartholz muss die Spananbahme verringert werden
- min. / max. Stammdurchmesser des bearbeiteten Stammes 150 - 490 mm
(bei manuellem Betrieb min. Durchmesser 128 mm)
- Vorschubgeschwindigkeit 0,8 - 6,8 m/min. (mit Frequenzumformer)
- Rotationsge... more
2004
excellent (used)
CATALOG NUMBER 5805
TECHNICAL DATA
- number of cutting units 1
- 360mm horizontal clearance
- 520mm vertical clearance
- 11kW main engine
- 0.55kW feed motor
- manual height adjustment of the cutting system
- smooth regulation of the feed speed on the inverter
- conveyor belt
- length of the band saw 4010mm
- band saw width 30-42mm
- band saw thickness 0.9-1.25mm
- working table length 3030mm
- width of the working table 225mm
- max height of the cut material 450mm
- minimum cutting thickness 1... more
A gluing system for staircase or complex 3D form construction with shaping vertical bars. With a pumping capacity of 7.0 m3/h a vacuum of 0.05 bar is reached, which equals a surface pressure of 9.5 t/m2. With timer, manometer, filter and two entries. Vacuum creates a uniform pressure of 9.5 t / m2, distributed evenly over the whole surface, which makes your curves look perfect.
Includes
Fq2vdzj
3x vacuums bags 6,5m x 66cm, 6,5m x 52cm and 6,5m x 33cm.
18x vertical shaping bars.
Steel girder f... more
2003
excellent (used)
Saw-spindle moulder machine for the demanding craftsmen and carpentries looking for flexibility and an “elite” quality finishing.
Production-level performance. 8.5' sliding table, double-hung cast iron saw unit with scoring, rearward tilting shaper spindle for use with power feeder, digital-mechanical readouts, and many other key features.
Tbi0mc3
Max. sawblade diameter with scoring blade installed mm 315
Max. sawblade projection from table at 90°/45° mm 100/70
Cutting widh on parallel fenc... more
Used 4-sided moulder in good condition. Machine will be cleaned, checked and calibrated before shipped to customer.
Bjr8i8eab3
TECHNICAL DATA:
- working dimensions: 240 x 180 mm
- Feed speed: 4 - 25 m/min
- hard chrome working table for extra durability
- 4 working spindles
- Each spindle has its own motor
- Motorized adjustment of table height and width. more
Sale of a well used and fully functional CNC machine
the plant will be available from 20 December 2020
Technical data:
Manufacturer C. M. C. Zogno/Italy
Year of manufacture 1995
Total weight 35 tons
5 axis CNC machining: X axis 36 m
Y-axis 5,8 m
Z-axis 1,25 m
C-axis 360
B axis +/- 110°
Precession on 36 m +/- 0.2 mm
spindle speed infinitely variable 0 - 10000 rpm
Tool holder HSK 100
Automatic tool change: round magazine 16 different tools
turning magazine 2 circular... more
new
Technische Daten: - max. Werkstück Höhe 245 mm
- min. Werkstück Höhe 50 mm
- max. Werkstück Breite 250 mm
- min. Werkstück Breite 50 mm
- Arbeitshöhe 900 mm Sägeaggregat - Motor 7,5 kW
- Drehzahl 2900 U/min.
- Schnitthöhe 145 mm (170),(245)
- Absaugstutzen
- Sägeblatt FI 400 mm (450),(600),(750) Horizontal-/Vertikal Fräsaggregat - 2 vertikale Spindeln 2 x 7,5 kW
- 2 horizontale Spindeln 2 x 7,5 kW
- Spindel FI 40 mm
Dxikdp2f
- Drehzahl der Spindeln 2850 U/min
- max. Werkzeug FI 180, ... more
2001
excellent (used)
Planer working width 410mm
Surfacing tables total length 2000mm
2 feed speeds on thicknesser 6/12m/min
Igrqu8m30
Min. ÷ max. working height on thicknesser 3 ÷ 240mm
Three-phase motor power starting from 5 (6) kW - 50 (60) Hz more
Spindle moulder SCM Ti105 NOVA with blade tilting (-45°) and a lot of additional equipment:
- Fence with mechanical adjustment
- version ''LL'' with cast iron extensions on right and left side of the table. Combined length: 2500 mm
- stronger 7.0 KW motor
- Interchangable spindle (30mm included)
Bjr7od0fxc
- additional spindle for router bits
Machine is assembled and displayed in our showroom. more
refurbished (used)
Selling our joinery machine of the company Weinmann WBZ 160.
- The customer service
- Infeed roller conveyor for 13 m logs
- export 8,50 m + extension by means of motion detector
- All tools that are shown in the tool change of the joinery machine are included.
Guarantee, warranty and return claims are excluded.
Bi8h70vrcz more
2005
good (used)
Biesse Selco EB 70L
Year: 2005
Cutting measure: 3800x3200 mm
Main motor 7,5 kW
main saw blade 300 mm
E7cy9jytc
Scoring motor 2,2 kW, manual adjustment of the blade
scoring blade 200 mm
7 pc pneumatic gripper
Quick Opti optimization software, on board
Label printer
Location: Hungary/Hajdúszoboszló more
Altendorf F45 Pro Drive squaring machine
Bjgffcx2mp
Pro drive control
Trolley 3400 mm
HP 10 blade motor
CNC ascent and descent
CNC 0 ° -46 ° inclination adjustment with automatic correction of the cutting height when the blade is inclined
CNC parallel register
Tilting square cutting register
CNC-controlled three-axis engraver
New machine to CE standards year 2018 more
Carousel Cramp for jointing solid panels . Haven’t any use for with a while . Can be seen operating .
Ey030gvte more
1998
ready for operation (used)
Classic circular saw with manual lifting/tilting of sawblade unit.
TECHNICAL SPECS:
- Sliding table carriage: 3200 mm
- scoring unit: YES
- right paralel fence: 1270 mm
Bhdalcmkwi
- Motor power: 5.5 KW more
BURMEK
CNC automatic joinery and cutting machine
Type SPL 160/2
Siemens SIMATIC control
Year of manufacture 1995
condition: used machine, functional
+ Infeed roller conveyor
+ Material conveyor roller
+ rectangular milling machine, swivelling
+ under table swivel/crosscut saw
+ 1 x drilling device, vertical
+ 1 x drilling unit, horizontal
+ Positioning / transport system incl. material gripper
+ cross pusher system
+ Material support stands
Bjcxfnzqtn
+ Outfeed roller conveyor
Machine location: ... more
1999
excellent (used)
SCM machining centre TECH 99L
the year 1999
working table 3000 x 915 mm
Working axis;
H7vu39vek
X-3290 mm
Y-1180 mm
From – 200 mm
Chucks ISO 30
magazine of 3 tools
spindle speed rpm 18000/24000
power elektrowrzeciona 6.6 kw
cutting unit on the machine
boring units vertically and horizontally, in the X and Y axis
machine disassembled
has ogrodzeni more
3-head, 6-axis CNC machining centre for structure beams, roof chairs, ceiling and wall elements with log-house unit ROUTECH OIKOS 4000RT (SCM Group)
The maximum size of the workpiece 300 х 800 х 14000 mm.
D8gkiux
Processing from all sides without beam overturn.
Blockhouse unit.
Interchangeable 12 tools.
Very little was at work.
Technical condition - like new.
Currently disassembled, packaged and ready for shipment.
Before disassembling, it was tested and set up by the manufacturer.
Perhaps assis... more
Hydraulic Machine,
Approx. 7 cycles per minute with the machine at full capacity,
3 Cylinders,
1 Mono-bloc clamp,
Max. length of each expulsion 60 mm,
1 Capacitance probe,
Octagonal drum diam. 1000 mm. Volume capacity ~ 0.2 m3,
End of cycle device,
G0sdsof
Electronic pressure gauges, pump and clamp,
Siemens Touch Screen PLC,
Siemens Display,
Counter,
Inductive limit switches,
Machine position control via LEDs,
Tapping head,
Pre-Heating System,
Temperature and oil level probe,
Current stabilizer,... more
Three "Butterfly" assembly tables don't
Bizljvwxnh
two lift-up tables
an assembly table with rollers
13000mmx3800mm more
ready for operation (used)
KUPFERMUHLE raboteuse 4 faces dâ??occasion â?? type DOMA1800 â?? rabotage 2 faces dessous/dessus 1800 mm â?? vitesse dâ??avance environ 30m/min max â?? toupie droite/toupie gauche â?? largeur utile 30- 200 mm - Largeur de travail 100-1800 mm - Hauteur de travail 30-300 mm - Hauteur de travail à 4 côtés 30-300 mm - Nombre de broches 4-6 - Disposition de la broche 2 fond - 2 têtes de coupe supérieures (droite et gauche en option) - Diamètre de la broche vert. 40 mm - Forces du moteur 15-15-1... more
Planing width 30-400 mm
Bijerf9vir
Plane height 15-300 mm
with complete conveyor tables in the inlet and outlet
(Machine can still be inspected in operation) more
2008
good (used)
-swarf container 175 litres with level indicator
Biwvwh8vn9
-Energy-saving motor 2.2kW / 380V Energy efficiency class IE3
-filter surface: 7m2
-automatic compressed air cleaning
-Vn 1,100 m3/h
-Vmax 1,950 m3/h
-vacuum at Vn: 2.800 Pa
-vacuum at Vmax 1,500 Pa
-connection: 140/160 mm
-Very quiet: ᐸ 73 dB(A)
-dimensions: 1.418 x 1.012 x 1.990mm
-Weight: 350kg more
BURMEK joinery and cutting machine type SPL 160.2
good, fully functional condition, year 1995
computer controlled
System suitable for beams, rafters, shifters, purlins, rafters, cable drums, pallets, formwork, palisades, gables, trusses, slats, prefabricated houses and much more.
Plant consists of:
Einförderrollenbahn
Material conveying roller
Electronically controlled under-counter swivel chop saw
swiveling cervical rectangular cutter 0 - 90 °
Horizontal Drill
Vertical Drill
Ausförder roller ... more
ready for operation (used)
SCM raboteuse dâ??occasion â?? type S63 â?? machine lourde â?? bâti fonte â?? largeur utile 630 mm â?? hauteur utile 240 mm â?? arbre 4 fers â?? moteur 7.5 cv â?? avance 6/9/12 ou 18 m/min â?? montée/baisse motoriséeSCM planer used - type S63 - heavy machine - casting cast iron - useful width 630 mm - useful height 240 mm - shaft 4 irons - motor 7.5 hp - advance 6/9/12 or 18 m / min - motorized up / down
T8smgy8w more
2008
ready for operation (used)
Support table can be moved parallel, can be swivelled to 60° on both sides
1 unit: crosscut saw cutting height 280 mm 4 Kw motor
Pivotable from 0° -60
2 unit cutting saw Cutting depth at 450 mm saw blade 175 mm
with 550 mm saw blade 225 mm Swiveling from 0° - 45
3/4 unit skip saws Cutting depth at 350 mm Saw blade 125 mm
Accessories
HM Saw blades
Laser with holder
Chassis
Fq2p02b
Machines weight 1100 kg more
excellent (used)
Catalog number 4348
- 150mm cutting width
- cutting height from 45-200mm
- kerf thickness 1.3-1.4 mm
- number of saw frame strokes 450 strokes / min
- main engine 11kW
- feed speed 1.5m / min
- infinitely variable feed
- central lubrication
* included:
- saw frames x 6 pcs
- spacers about 200 pcs
- balls around 60 pcs
- guides 12 pcs
- spare support frame
It is very easy to change the saw frame by turning the machine.
Bhspwuisyn
Overall dimensions:
- length 2500mm
- width 750mm
- height 1... more
2007
excellent (used)
Glue tank, sand Machine equipped with a coffee table with ball obcinającą flange shaft Height 15-120 mm Pneumatic cutting edges adjustable feed speed power supply 400 V year of manufacture 2007 Documentation CE Machine very neat
2rda0a more
Infeed (13 m) for joinery machine
SMA-REF-6522
Type: trimming machines
Manufacturer: Hundegger
Model: Hundegger
Year: 2017
Working range:
Beam-dimensions:
max. 0,3 x 0,6 x 13 m
(This is an infeed only,
not a joinery machine!)
Condition:
in use
Bfnymxv0ay
ready for your test
Location: Eastern Germany
Availability: on demand
Terms of delivery: ex works
Terms of payment: 100% before dismantling/loading more
ready for operation (used)
GUILLIET raboteuse lourde d�??occasion �?? type LKS �?? largeur utile 630 mm max �?? hauteur utile 300 mm �?? vitesse d�??avance variable �?? pression d�??entrainement réglable �?? rouleau dans la table �?? entrainement double rouleaux en sortie �?? montée/baisse électriqueGUILLIET used heavy planer - type LKS - useful width 630 mm max - useful height 300 mm - variable feed speed - adjustable drive pressure - roller in the table - drive double rollers at the outlet - ele... more
With CE protection cabin
Support table can be moved parallel, can be swivelled to 60° on both sides
1 unit: crosscut saw cutting height 280 mm 4 Kw motor
Pivotable from 0° -60
2 unit cutting saw Cutting depth at 450 mm saw blade 175 mm
with 550 mm saw blade 225 mm Swiveling from 0° - 45
Nxy09
3/4 unit skip saws Cutting depth at 350 mm Saw blade 125 mm
Accessories
HM Saw blades
Laser with holder
milling spindle 40 mm with 200 mm clamping length
Milling motor increased to 7.5 kW
Chassis
Mac... more
1990
excellent (used)
Spindle Lurem T 45
the year 1990
Ominrzy
motor 4 kw
turnover changed on
up to 8000 RPM more
Joinery woodworking machine
SMA-REF-6196
Type: trimming machines
Manufacturer: Kruesi
Model: ZA 66
Year: 1987
Sawblades:
Bbdgug0ydq
5 Sawblades
4 Spindles
Working range:
Cutting depth of the units:
125 - 290 mm
Condition:
ready for action
under power
Location: Austria
Dimensions: Weight: 1 ton
Availability: on demand
Terms of delivery: ex works
Terms of payment: 100% before dismantling/loading more