Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top) • Plate type: elkom electronic plates • Press force: 90 tons on 80% of the surface • Press cylinder: 6 x Ø 70 mm • Specific pressure: 2. 05 kg/cm² on 100% of the surface, 2. 56 kg/cm² on 80% of the surface • Loading and unloading side: 3000 mm • Heating system: electronic 25. 4 kw, maximum temperature of 120°c • Automatic opening with timer Extra Information Hydraulic System Two-stage unit with submersible pump for noise reduction and lubrication of rotating parts. Fast closing/opening pump (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). 2 HP Electric Motor Control/Safety Valves: Maximum pressure valve, pressure retention valve (check valve), valve for low drain pressure (pre-drain valve), and oil drain magnetic valve. Control Panel and Electrical System 2 Temperature regulators for setting the plate temperature Pressure gauge for pressure regulation with automatic pressure equalization system General on/off switch Two manual safety buttons for closing the press Timer for automatic opening Switch to select manual or automatic opening of the platens after the work cycle Off/on switch for upper and lower platen resistance Safety Systems Timed bimanual control for closing the press Safety rope on all four sides of the press Platen lock for maintenance Protective guards for the pinion and rack units Safety stickers and warning notices Iasdpfx Ahjyalmbs Njl Operating and maintenance manual Complies with CE standards Press Structure Made of composite and welded steel Equipped with a rack and pinion guide system for perfect parallel movement during closing/opening of the plates. Elkom Heating Plate Electric plates with electric resistors Consist of a chipboard with an aluminum sheet mounting electric resistors Maximum Working Temperature: 120°C Maximum Thrust: 7 kg/cm²

Condition: used, functionality: fully functional, Arm reach: 630 mm Iodpfox U Tggox Ah Njal Veneer thickness: 0.4 - 2 mm Feed speed: 7 m/min Voltage: 220 V, single-phase Overall dimensions: 950 x 500 x 1180 mm (H) Weight: 95 kg

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Iodpox Upgcjfx Ah Neal

Condition: good (used), Generally in good condition 2600 mm cutting length Up to 3 mm veneer thickness Including scale for adjustment Overall, a very nice machine for processing veneer. If you have any questions or are interested, please feel free to contact us! Iasdpfx Aheyakyts Nol

Year of construction: 1975, condition: good (used), functionality: fully functional, Peeling machine / Centering-Charging device Peeling machine Angelo Cremona SFL 2700 x 1100 - 1975 Centrering and Charging device CTA 4 - 1976 Iedpfxjt D A S Ie Ah Neal Veneer unwinding Bertram - 1995 To be dismantled by buyer

Condition: like new (used), gluing machine for thread with adhesive zigzag stitching Iodpox U Dhzjfx Ah Neal air-blown heating element pedal control 380V power supply

Condition: ready for operation (used), Year of construction: 1998, This ITALPRESSE DS 130 was manufactured in 1998. A robust veneer press featuring a motorized infeed table with a PVC belt and an automatic loading system for efficient panel handling. It boasts a maximum total lifting force of 110 tons and a heating plate size of 3500 x 1400 mm. Ideal for high-quality veneering processes. Contact us for more information about this machine. Ijdjyall Rjpfx Ah Noal Additional equipment • Motorized infeed table with PVC belt • Motorized loading table for manual assembly of the panels and automatic loading into the press on the 3500 mm side • Heating plates made of solid steel, drilled and machined on all sides • Automatic loading and unloading of the panels on the 3500 mm side Machine Benefits Technical Machine Benefits • Maximum total lifting force: 110 tons • Opening: 140 mm • Power supply: 400 volt eu / 50 hz / 3 ph. + g • Electrical boiler for thermal oil: 18 kw • Devices for adjusting the working height for flatness on all uneven floors // devices for adjusting the belt tension and centering with foot switch • Construction made of assembled and welded fe430 steel beams • Cnc-machined structures for three-dimensional parallelism • Hydraulically controlled planarity with 4 racks and pinions • Protective nets and safety devices in accordance with ce regulations • Leveling devices at the base of columns for uneven floors Extra Information Refurbished - without warranty Control panel with electric pressure gauge, buttons, and control switches Lifting hooks for transport by crane

Condition: good (used), functionality: fully functional, Outreach 420 mm Feed rate 6 m/min Veneer thickness 0.4 - 2 mm Electrical connection 230 V Iodpfex Uphtex Ah Neal Machine 'start' via foot switch Machine immediately available

Condition: used, Storage location: Supplier Isdpfx Ahex Upfls Njal

Condition: used, Stack cutting machine, guillotine cutter, guillotine SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Guillotine for paper, cardboard, rubber, wood, and veneer Paper shear, rubber shear, plastic shear, paper and veneer shear Ijdpfx Ahedzqnye Neal Machine no. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge: max. 1550 mm Motor power (blade drive): 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade activation - Automatic pressing device holds the paper stack on the table - Manual clamp and blade activation via foot switch (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electric control not functional, without wiring diagrams, without user manual - Back gauge adjustment via servo motor (servo motor, controller, and control present, not functioning) Required space (L x W x H): 325 x 270 x 165 cm Space requirement for transport without disassembly: Length 330 cm x Width 270 cm x Height 175 cm Space requirement for transport with disassembly: Length 550 cm x Width 220 cm x Height 175 cm (machine + table separately) Machine dimensions: Length 270 cm x Width 190 cm x Height 175 cm Back gauge table: Length 240 cm x Width 170 cm x Height 120 cm Weight of assembled machine: approx. 5000 kg (without transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sales price does not include the 20 mm steel plate on which the machine is placed in storage. (Price for the steel plate: EUR 900 net)

Condition: excellent (used), Veneer Press OTT JU 2513 - used - new press plates, emergency stop rope, push-button control, anodized plates ----- Technical data ----- Press area: 2,550x1,350 mm, Power per heating plate: 9,100 W, max. opening height: 400 mm, number of cylinders: 4 units Quality info: - Hydraulics checked - Plates replaced - Plates checked for flatness - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use Iajdpfxsx R Syde Ah Nol

Condition: good (used), functionality: fully functional, ANGELO CREMONA DRYER model ER 18, 4400mm, 3 levels, steam steam consumption at 10 bar - 2200 calories/hour water consumption at 185° - 1100000 calories/hour PRODUCTION Iaedsvndvyspfx Ah Njl birch thickness 1.2mm initial humidity 80% final humidity 6% load 85% 4.2 m3/hour Installed power Kw 95.5 Machinery dismantled, requires overhaul.

Condition: ready for operation (used), Year of construction: 2019, This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², making it ideal for veneer processing. Consider the opportunity to buy this FORMAT4 HVP Typ 4 veneer press. Contact us for more information about this machine. Machine Benefits Iaedox U Tv Ijpfx Ah Nsl Technical Machine Benefits • For connection to existing heating system / pressing temperature up to 90°c / the fabricated steel platen can take a maximum pressure of 5kg/cm²

Condition: used, - Documentation available: No - CE certificate present: No - Number of glue rollers [pcs]: 2 - Roll diameter [mm]: 200 Iajdpfowivv Tex Ah Nel - Max. working width [mm]: 1300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), shelf length: 3000 mm shelf width: 1300 mm Isdpfx Ahjx Thnij Neal number of pistons: 6 year of manufacture: 2004 water heating weight: 3900 kg 400 V gap clearance: 400 mm CE marking

Condition: excellent (used), Veneer Pack Cutting Machine JOSTING, Type: EFS 2800 L with Cross Veneer Shear KUPER, Type: ZV800 E Machine No.: 10386 Cutting length: 2800 mm Insertion height: 80 mm Parallel fence range: 20 - 570 mm Pressure beam: Hydraulic cylinder; 2 pressure stages Knife beam: Brake motor, gearbox, crank mechanism Parallel fence: Three-phase motor, positioning drive Electrical connection: 7.7 kW Footprint (with parallel fence): 414 x 155 cm Height: 170 cm Weight: 3500 kg Iedpfox Tfvdsx Ah Nsal Cross Veneer Shear KUPER, Type: ZV800 E For trimming veneer packs Machine No.: Cutting width: 850 mm Insertion height: 60 mm Max. blade thickness: 3 mm Motor power: 3.5 kW Footprint x Height (without support table): 112 x 60 x 140 cm Weight: 480 kg

Condition: used, Year of construction: 1977, Max. pressing length: 2550 mm Max. pressing width: 1200 mm Specific pressing pressure: 2.7 kg/cm² Total pressing pressure: 80 t Press opening width: 400 mm Iedpfox S Ruisx Ah Nsal Heating plate material: gold anodised Operation: rotary switch Number of pressure pistons: 4 pcs Safety tear-off cable: Yes Condition of heating plate: good Weight approx.: 3600 kg Storage location:

Condition: used, Year of construction: 1999, functionality: fully functional, Complete line consisting of: 1. Angelo Cremona Veneer Peeler – detailed description available below 2. Angelo Cremona Dryer – description and photos available in the listings 3. CMP Press – description and photos available in the listings 4. Imeas Sander – description and photos available in the listings 5. Raute Composer – description and photos available in the listings PEELING PLANT Comprising of: Centering Loader Iajdpfx Ajvm An Eeh Nel 1. Model CE08 2. Angelo Cremona 3. Positions logs for loading onto the veneer peeler 4. Power supply: 400Vac/50Hz – 50kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Weight: kg Maximum dimensions: 600x300x400 mm 5. Production capacity: 4 logs per minute Veneer Peeler 1. Model SFH870 2. Angelo Cremona 3. Peels a sheet of wood from the rotation of the log 4. Power supply: 400Vac/50Hz – 240kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 10 L/min Maximum dimensions: 600x400x300 mm 5. Production capacity: 50 cubic meters per shift Cutting and Sorting Line 1. Model TSR27 2. Angelo Cremona 3. Transports the peeled ribbon to the guillotine for optimized sheet cutting 4. Power supply: 400Vac/50Hz – 70kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Maximum dimensions: 300x200x200 mm 5. Production capacity: 50 cubic meters per shift Sorting Line and Vacuum Stacker 1. Model LTR27 2. Angelo Cremona 3. Separates and stacks recovered sheets from full-size sheets 4. Power supply: 400Vac/50Hz – 180kW Compressed air consumption: -- Maximum dimensions: 300x1300x500 mm 5. Production capacity: 50 cubic meters per shift

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Iasdpfxjxgqmxo Ah Njl Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: good (used), Year of construction: 1961, functionality: fully functional, Width: 1.400 mm To be dismantled by buyer Iodpfx Ahevc Dbfe Njal

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm Iodpfx Ahexgbwzs Nsal FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: good (used), pressing force: 95 t, cylinder diameter: 90 mm, plate width: 1,350 mm, Veneer press Joos Type: HP 90 with 2 intermediate plates, stacking automaton and scissor lift table Pressing area: 2,550 x 1,350 mm Working surfaces: 3 pcs. Intermediate plates: 2 pcs. Pressing force: 95 t Piston diameter: 90 mm Specific pressing pressure: 2.75 kg/cm³ Number of cylinders: 4 Heating medium: hot water Total power: 1.3 kW Safety device: emergency cord Dimensions of the press: 3,000 x 1,530 x 2,200 mm Weight of the press: approx. 4 t Elkom heating plates in very good condition Scissor lift table Iodpfx Ahoxnqq He Njal The plates are automatically stacked and thus discharged.

Condition: used, Year of construction: 1996, Press dimensions: 2550 x 1350 mm Plates: Gold anodized Total pressing force: 80 t Specific pressing pressure: 2.8 - 4.0 kg/cm² Hydraulic cylinders: 4 x 90 mm Opening width and press stroke: 400 mm Safety pull cord Safety frame Button control Total connected load: 19.3 kW Storage location: Supplier Iaodpfxoxy Tl Rj Ah Nol

Condition: good (used), Year of construction: 1988, functionality: fully functional, Clipper Babcock BSH - STC 28 - 1988 To be disassembled by the buyer Ijdpet D Dg Tefx Ah Nsal

Condition: good (used), overall weight: 5,000 kg, working width: 1,300 mm, plate width: 1,350 mm, Veneer Press Bürkle U140 Working surfaces: 5 pcs. Intermediate plates: 4 pcs. Plate dimensions: 3050 x 1350 mm Iasdpfxjxn Um Ee Ah Nel Working dimensions: 3000 x 1300 mm 8 hydraulic cylinders Max. surface pressure: 5 kp/cm2 Max. operating pressure: 348 bar Heating medium – hot water from central heating Cooling – cooling circuit with WILO pump, expansion tank, piping Weight approx. 5000 kg Good technical condition of plates and hydraulics