Wood type: softwood or hardwood
length: 150 - 1000 mm
width: 40 - 205 mm
height: 20 - 80 mm
Ratio min. length to max. width: 2 to 1
Working height: 900 / 925 mm
Speed: 5400 rpm
broaching cutting: possible
tool diameter: 160 / 170 180 / 250 min
inner bore diameter: 50 mm
Milling tools: tine cutters/mini tine cutters, without anti-rotation device, as single tools or in sets, also in combination with edge tine cutters
Drive: indirect via flat belt
input length: minimum: 150 mm
initial length: maximum: 6,100 mm
input size: min.: 20 x 40 mm / max.: 80 x 205 mm
More technical data: See PDF
Compact finger-jointing machine Weinig Grecon Ultra TT for economic wood upgrading by gluing short pieces too long rods. • Equipped for flat dovetailing (horizontal).
Possibility vertical and horizontal jointing
The machine configuration allows for maximum efficiency of up to 4000m/shift. The use of the receiving table with automatic feed conveyor slats for introducing the press PHSL provides support line by one, giving the elements of the employee. The line operates in automatic with manual loading of the material.
Width of the input packet shapers, milling: 600mm
Width of glued elements: 40 to 155mm
Length of gl...
Weinig GRECON TURBO S finger jointing line
- German production
- DTR, CE
- year of manufacture 2010
- high efficiency up to 200 elements / min - 28 km / 8h
- width 60 - 225 mm
- thickness 18 - 48 mm
- length 300 - 2000 mm
- pressing length 8100 - 16400 mm
- power consumption 150 kW
- air consumption 3100 Nl/min
- suction capacity 14845 m3/h
- two milling stations
- connecting with a dash and a zigzag
- loading with a conveyor wit...
Set for finger jointing in medium and mass production.
The machine is technically efficient and in good condition.
Several sets of tools are included.
– industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material,
– sensitivity controlled by microprocessors /automatic control/,
– turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (fu...
Manufacturer WENIG/Grecon Dimter
Model, Type ProfiJoint 10/6100 LI
Year of production 2015
Curb weight 6400 kg
- length 13000 mm
- width 4100mm
- height 2100 mm
Engine power installed 41 kW
Parameters of the glued material W x D x D
Width 40 - 170mm
Thickness 20 - 50 mm
Length 150 - 700mm
Pressing range 3000 - 6100 mm
>wood entry lengths 900 to 6100 mm<
>wood rests and tools drive<
Finger jointing machines and lines are a masterpiece of woodworking industry
>Best tooth milling quality and optimized cutting speed<
>Long service life of the milling tools / dovetail cutters<
-MINDA - MACH I (patented) -High performance finger jointing line
-for KVH / DUO / TRIO / BSH / GL / CLT -technical running meters capacity = approx. 150 m/min
-vertical and horizontal joints possible max. 200 x 300 mm
Conditions of delivery
Pick your own
Cost of delivery
The dimensions of the raw material wsdowego
The length of the elements batch mm 170 ÷ 900
The amount of cutting mm 20 ÷ 155
The width of the package of workpieces 600 mm
Capable of milling tools with a length of 10 mm teeth (5, 15, 20 optional)
Duty cycle automatic with manual loading of the material
Air working pressure of 0.6 MPa
Compressed air req...
I am offering my finger joint line for sale. My company is the first owner of the machine. The machine was barely used, this is the reason of selling, we need space for other machines.
The machine is still operational, in you want to inspect before purchase, you are free to come check.
All the important data is listed among the pictures!!
If you are interested and need more photos or video, let me know.
Complete finger jointing line
Controlling system like new!
Length max. 6300 mm
Maximum width: 180 mm
thickness: 63 mm
width: 190 mm
thickness: 80 mm
Cross-cut saw H3424653 Grecon
Fräßer 85 kW
Total power supply approx. 110 kW
Siemens Simatic controller
Fully automatic package jointing line 500 mm Packaging width
- Consisting of:
- Finger jointing Central Milling Machine
- 2 fixed transport tables
- 1 Wheeled processing unit
- 2 milling spindles
- 2 flakers
- Separating station with tilt-back
- Threading section 2 transport chains
- Feed with double rollers
- Extrusion press 12 ton
- Packaging width 500 mm
- wood in max. 1950 mm
- wood in min. 200 mm
- Workpiece 50-215 mm
- Workpiece thickness of 25 to 100 mm
SEMI AUTOMATIC FINGER JOINTING LINE EASY BEAM, composed of :
1) rollerway in entry
2) ONE-SIDE TRIMMING/MILLING MACHINE mod.MILL250
3) rollerway in exit with side pusher
4) GLUEING UNIT by manual spreder of the glue
5) POWER SUPPLY POLYURETHANE GLUE PUMP
6) HYDRAULIC FINGER JOINT PRESS mod. ECO LOGIC with 20 tons pressure, with CROSS CUT in exit to cut the board at the final length.
7) 12 MT lengt ROLLERWAY IN exit with side pusher to push out the jointed board.
8) support bars
Machine for splicing semi-finished products by length
Pressing machine 6 m
Pressing machine 7 m
Length of semi-finished products - 150-900 mm
Thickness of semi-finished products - 18-80 mm
Height of semi-finished products - 40-150 mm
Width of loading 600 mm
Fraser - 18,5 kW, 6000 rotations per minute, cutter diameter 250 mm.
Saw-grinder - 11 kW, 6000 rotations per minute, saw diameter 250 mm.
- Raw material boards 80mm to 260mm wide.
- Length with finger-jointing 2m to 6m
PHE - length from 4m to 12m
PHE - width from 75mm to 250mm
PHE - height max. 1.2m (approx. 54 layers)
Total weight of the maschine: approx. 22T
maschine height max. 3m
- Total active power consumption: approx. 45kW
- Mains: 3-N/PE/400V/50Hz
- Fuse protection: 100A
- Required capacity: approx. 3000m3/h
- Negative pressure: approx. 2000Pa
Workpiece width max 65mm
Workpiece thickness max 200mm
Feed length max 1,500mm
Packaging width 600 mm
Pressing length 6,200 mm
Conveyor/separator Fully automatic
Number of milling units 1
Min. input length 200 mm
Total pressure 7,500 kg
Main motor power 18kW
Milling machine cycles capacity/min 2
Capacity of press cycles/min 5
Loading via conveyor belt with boxes
Milling feed Movable table, fixed aggregates
Gluing with profiled nozzles
Full line , infeed table with separator of boards , automatic moisture meter for every board , planning machine WACO , Wood EYE , Opticut 2 pieces and connected to combipack fingerjointing line .
I sell the semi-automatic finger joint line Spanevello Sky-line.
Input length 150-2.000mm
Input width 30-150mm / 600mm in 1 step
Input thickness 20-80mm
Automatic finger joint unit with glue spraying 1 side
Manual turning of the material for the 2nd pass on turning table
Automatic feeding to the press
Press 6,30m with automatic cycle and end-cutting saw
Strong construction. Very good condition.
Input length of elements min / max 150 - 1000 mm
Average length of entry 425 mm
Element thickness min / max 18 - 80 mm
Width of elements min / max 30 - 205 mm
Wood cross section 23 × 65mm
Output length of elements min / max 3,000 - 6,100 mm
Average starting length of elements 5500 mm
The length of the finger joints 10-11 mm
Type of wood - soft, hard Beech spruce
Wood moisture 8-12%
Package width 600 mm
Motor 1.1 kW
Package width 600 mm
Spindle diameter 50 mm
Handling equipment for a finger jointing line.
Roller conveyors, wide- and narrow belt conveyors, a trim saw conveyor,
trim saws, etc. See pictures. With documentation.
Good condition, made by Martek in Finland.
The line is fully operational, modernized in 2019. Among others, : Hydraulic installations and control.
minimum material thickness - 20mm
max material thickness - 130mm
minimum material width - 30mm
max material width - 130mm
minimum input length of the material - 250mm
max input length of the material - 1600mm
minimum output length of the material - 250mm
max output length of the material - 300mm
Singletech - 2 Cycle per min , 150 Thickness - 6.600 Press Lenght , Two feeding Line on Press , Easy Supplying Touchpad Control Unit, Memory System for differences woods , Differences cutting lenght on Press.
We sell a complete glued wood plant
Finger jointing line Dimter
with appraisal station, crosscut saw, router, press and Rex planer as well as stacking line.
Dimter DFU joint gluing line
with feeding roller conveyor, 12m press, planing line Rex HOMS 630, turning station, crosscut saw Bäuerle, stacking line Minda
MANUAL FINGER-JOINTING LINE
Semiautomatic finger-jointing line, including:
Milling unit with hydro-pneumatic feed mod. IFJ 2008
Manual gluing unit mod FG 2002
Hydraulic press with pneumatic crosscut saw mod. PFJ-2041-SA
The trimming, milling, gluing pressing and crosscutting of the workpieces is performed by 1 or 2operators during a semi-automatic working cycle.
Production capacity: up to 2 / 3 m³/8hrs
Finger jont line composed with brand new machines
Photo gallery: the 10 strongest forklift trucks in the world
Machineseeker once again biggest sponsors of 2nd German football league
Sell now on Machineseeker! Over 250,000 inquiries per month
Olympic Games: Machineseeker supports “Team Germany” in Paris
Morlock Motors official partner of Machineseeker and Truckscout24
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.