Condition: used, Year of construction: 2000, VENJAKOB HGS-Z/H Surface Coating Machine / Painting System Manufacturer: VENJAKOB Type: HGS-Z/H Year of Manufacture: 2000 Machine Type: Automatic surface coating machine / Spray painting system for all 5 sides Surface coating machine with 4 spray heads for water-based paints, solvents, and stains Design: Automatic surface coating machine Process: Spray painting / Surface coating Kodpfx Apozvaz Dsmena Workpiece transport: Continuous operation Compressed air connection: approx. 6 bar Application area: Wood and wood-based components Control system: VENJAKOB control system Paint application: Spray application Design: Industrial continuous system Machine dimensions: 4450 x 3170 x 2520 mm Passage width: 1300 mm Working height: 920-960 mm Passage height: 200 mm Rubber conveyor belt with paint recovery and belt cleaning

Condition: used, Year of construction: 2009, Painting system Knedpfszuzt Eox Apmja Manufacturer: Cefla Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: - Infeed conveyor with light barriers - Dust removal brush machine - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts - Outfeed conveyor from the drying oven Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances - Dust extraction system for the infeed table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, Painting system for edge surfaces Manufacturer: WIKOMA Painting of narrow edge surfaces Commissioned: 2021 Intended use: Spraying the edges of furniture panels arranged in stacks. Kodpfx Ajzuztxspmjna Scope of delivery: - 2 spray booths - 2 hot air drying tunnels - 1 sanding booth - Chain conveyor - Control cabinet The system was in operation until the end of June 2025. Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, Painting system The system consists of: SORBINI Smartcoater SP1 paint roller coating machine, year of manufacture 2009, approximately 3000 operating hours Roller coating and puttying machine Technical data Knedpfx Apezuzrhjmsa - Working speed: 5-20 m/min - Workpiece width: max. 1350 mm - Workpiece thickness: max. 100 mm UV lamp control cabinet UV lamps SUPERFICI Model 2UVPLUS65, year of manufacture 1998, on a VENJAKOB conveyor belt, year of manufacture 1998, average number of operating hours 8500 Working area 1.5 - 7.5 m/min. Max. element width 1300 mm Dimensions (length x width) Lamps with conveyor belt: 5100 mm x 1700 mm (+ 600 mm motors) Rollers: 2200 mm x 2900 mm Control cabinet for UV lamp: 2000 mm x 800 mm Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1990, Paint/coating application system Knedpfx Apozuzqdemsa Manufacturer: Bürkle Type: DAL 1 1300 Year of manufacture: 1990 Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, - SCM DMC System / E83 2000 sanding machine - Superfici Transporto conveying system - 2x Superfici Valiorta F1 B painting machines - 2x Superfici UV drying units Painting line Knodpfx Apszuzkkjmoa Manufacturer: SCM/Superfici Painting line consisting of: Sanding machine Manufacturer: SCM Type: DMC System / E83 2000 Year of manufacture: 2022 Conveying system Manufacturer: Superfici Type: Transporto Year of manufacture: 2022 2x painting machines Manufacturer: Superfici Type: Valiorta F1 B Year of manufacture: 2022 2x UV drying units Manufacturer: Superfici Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: used, Paint line Paint line consisting of: Vacuum loading system Technical data - 2-strand - Roller width: approx. 1000 mm Wide belt sanding machine Manufacturer: Büftering Type: Classic 213EB Year of manufacture: 2000 Technical data - Working width: max. 1350 mm - Vacuum conveyor belt - Electronic sanding pad Belt conveyor system Manufacturer: Belting Year of manufacture: 2019 Technical data - Dimensions: 6100 x 1000 mm Dust extraction system Manufacturer: Heesemann Type: EA2 Year of manufacture: 1990 Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 Throughfeed drying tunnel Manufacturer: Bürkle Technical data - with UV lamp Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 UV drying tunnel Manufacturer: Elmag Type: Ti166-35+2iVM1-65 Technical data - equipped with 2 UV lamps Wide belt sanding machine Manufacturer: Büftering Type: Optimat SCO 313QHQ Year of manufacture: 2007 Technical data - Working width: approx. 1350 mm - Machine equipped with 3 sanding units (cross-longitudinal-cross) 4-tier intermediate buffer Technical data - Tier size: 3000 x 1350 mm Dust extraction system Manufacturer: Cefla Type: TN3500/TT Year of manufacture: 2004 Paint robot Manufacturer: Cefla Type: Spraybotic MD Year of manufacture: 2004 Technical data - Throughput width: approx. 1350 mm - Automatic spray arm with 4 spray nozzles - Pump station with 5 Graco paint pumps Intermediate transport Manufacturer: Cefla Type: TN3591/TT Year of manufacture: 2004 Throughfeed multi-level dryer Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 UV drying tunnel Manufacturer: Venjakob Year of manufacture: 2008 Technical data - Infeed conveyor belt - 4 UV drying lamps (1 below, 3 above) - mounted on 2 belt conveyors Venjakob Belt conveyor Manufacturer: Cefla Type: TN3500/E Year of manufacture: 2004 Technical data - Conveyor length approx. 3500 mm Belt conveyor Manufacturer: Cefla Type: TT/1V/3750 Year of manufacture: 2004 Technical data - Conveyor length approx. 3750 mm Roller conveyor Technical data Kjdozuzhispfx Apmona - Roller width: 1700 mm - Conveyor length: 3750 mm Edge sanding and brushing machine Technical data - with alignment table - 3 sanding units for cross and longitudinal processing of door leaf edges Belt conveyor Manufacturer: Belting Technical data - Conveyor length: approx. 4000 mm - Belt width: approx. 1170 mm Turning system for door leaves Manufacturer: Kraft Year of manufacture: 2018 Individual components of the system can be purchased separately as follows: Vacuum loading system €10,000.00 Büftering Classic 213EB wide belt sanding machine €12,000.00 Belting belt conveyor €3,500.00 Heesemann EA2 dust extraction system €2,500.00 Bürkle DAL1-1300 paint application machine No. 1 €7,500.00 Bürkle throughfeed drying tunnel €9,000.00 Bürkle DAL1-1300 paint application machine No. 2 €7,500.00 Elmag UV drying tunnel €13,000.00 Büftering Optimat SCO 313QHQ €15,000.00 4-tier intermediate buffer €10,000.00 Cefla TN3500/TT dust extractor €4,000.00 Cefla Spraybotic MD incl. pump station €50,000.00 Cefla TN3591/TT intermediate transport €4,000.00 Cefla VN 2000/3/7500/300-24 multi-level dryer €20,000.00 Venjakob UV drying tunnel €13,000.00 Cefla conveyor belt TN3500/E €2,500.00 Cefla conveyor belt TT/1V/3750 €2,500.00 Roller conveyor €2,000.00 Edge sanding and brushing machine €5,500.00 Belting conveyor belt €2,000.00 Kraft turning system for door leaves (2018) €20,000.00 Note: T

Condition: used, Painting line Manufacturer: Giardina, Rich Fruit, Neomec, Kremlin The painting system is designed for painting elements made of MDF or HDF boards. The spray booths have two circuits, one for clear coats and one for colored paints. The system is designed for water-based UV coatings. The system consists of the following elements: Infeed Manufacturer: Neomec Conveyor table with a cleaner Spray painting machine Manufacturer: Giardina Type: Dualtech 416 Knsdpezuzg Sofx Apmoa Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Turntable Conveyor table Conveyor table with a cleaner Spray painting machine Manufacturer: Rich Fruit Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Each booth has two circuits, one for paint and one for coatings, driven by KREMLIN pumps and spray guns from the same company. Length of the machine line: 92 m Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, - RBO vacuum feeder – Tornado SC 1300 - HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) - HEESEMANN – Dust removal machine - Plus additional dust removal Ksdpfxezuzg Ej Apmsna - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - HACKEMACK slit nozzle dryer - RBO – Vacuum stacker Oil application line Year of construction: 2001 Oil application line consisting of: RBO vacuum feeder – Tornado SC 1300 HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) HEESEMANN – Dust removal machine Plus additional dust removal BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above HACKEMACK slit nozzle dryer RBO – Vacuum stacker with new Siemens control system in 2024 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2020, - Feed - Cutting - Cleaning - Infrared heating - UV curing - Coating - Digital printing - Structuring - Excimer matting - Stacking Digital printing system Manufacturer: Hymmen Type: JUPITER - JPT C 680/548 with OFS 850 Year of manufacture: 2020 Technical data - Nominal width: 680 mm - Maximum printing width: 548 mm (expandable to 680 mm) - Maximum panel width in the OFS: 510 mm - Working height: 900 mm (+50 mm) - Processing: Printing and top coating from above, back coating from below - Operating mode: two-lane up to a max. part width of 255 mm; otherwise single-lane - System speed: 8-65 m/min - Printing speed: up to 50 m/min Jupiter digital printing unit (JPT): - Number of colors: 4 - Print heads per color: 8 (max. 10 possible) - Free slots for additional colors: 6 - Print head type: XAAR 2001 Printing unit with DLE structure: - Printing rows: 1 - Print heads per row: 8 (max. 10 possible) - Free slots for additional rows: 1 - Total print heads: 8 - Print head type: XAAR 1003 Specifications of the raw panel: - Length: 600-2800 mm - Width of the raw board before the longitudinal cutting process: 900-1260 mm - The panels are split in the longitudinal direction before digital printing and coating - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Cutting format saw: - Longitudinal slitting system with up to 5 saw cuts plus 2 trimming units for the production of finished panel widths of 160-510 mm Kodpfx Apozuzfzjmona Specifications for finished panels: - Length: 600-2800 mm - Width: 160-510 mm - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Feed system (feed): - Type: Vacuum portal - Feed stations: 2 - Discharge stations: 1 - Maximum feed rate: 8 cycles/min; with double stacking: 16 panels/min - Identical stacks per station: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm - Maximum stack weight: 5000 kg (combined) - Design: without pits - Type of transport: protective plate or pallet - Protective plate (infeed): Length 800-2800 mm; Width 1000-1260 mm; Thickness 20-30 mm (up to 150 mm for pallets); max. 80 kg per panel/pallet Stacking system (outfeed): - Type: Drop shaft - Stack positions: 1 - Maximum stacking rate: 30 cycles/min - Identical stacks per position: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm (alternatively: 1000 mm) - Maximum stack weight: 5000 kg (combined) / Alternative stack configuration maximum stack weight: 3500 kg - Design: with pits - Type of transport: protective plate or pallet - Type of protective plate feed: loading by forklift, separation by robot - Protective plate (stacking): Length 800-2800 mm; Width 1000-1200 mm; Thickness 20-30 mm; max 80 kg per panel; Material OSB or HDF Units: - Number of units: 35 - Process steps: Feed, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking Application: - Industrial single-pass digital printing line for the high-speed surface finishing of large panels (flooring and furniture), which creates realistic wood, stone, or custom decors directly onto substrates. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2002, machine/vehicle number: 02153/29, AVAILABLE from 08/2026 UV dryer, Cefla UV 2000 Knsdpfxsyifwpe Apmja - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TN3000 - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - diagonally positioned tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - with belt transport - Length 3.000 mm - Width 2.300 mm - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5%

Condition: used, Year of construction: 2015, machine/vehicle number: 15-1-272, Technical specifications: Knodpfxsykuz As Apmsa - Manufacturer: Weger air solutions - Year of manufacture: 2015 - Model: ZL66 - Motor output: 1.27 kW - Length: 2,900 mm - Width: 705 mm - Height: 890 mm - Duct connection: suction 605x655 mm, discharge 605x560 mm - Heating medium: hot water PWW 70/50 - Airflow: 3,000 m³/h - Heating pipe connection diameter: DN 32 mm - Voltage: 230V - Location: in stock - Voltage fluctuation max. +/- 5%

Condition: used, Year of construction: 2007, machine/vehicle number: A 07-01-003, Technical Specifications: - Manufacturer: Venjakob - Model: VEN SPRAY Comfort - Retrofit 2026 (Year of manufacture: 2007) - Working width: 1.300 mm - Control panel on the right - Price for a refurbished machine - As-is condition, not refurbished - Dual-gun drive system - Dry extraction - Exhaust air capacity 7.000 m³/h - Exhaust nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 3–7 m/min - With belt cleaning system - With paint recovery via V-belt system - Automatic part detection via light curtain - Spray gun control, touch screen - 1 paint circuit installed - 4 airless spray guns, Krautzberger KAA1300 - 1 high-pressure airless pump Knsdezia Nuspfx Apmoa - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total power consumption ~ 23 kW Measures: - Length: - Width: 3,690 mm - Height: 2,520 mm (2,360 + 440 mm) - Volts, Hz: 400 / 50 - Color: Light Gray 7035 + Black - Location: Not in stock, available from August 2026 - Voltage fluctuations: max. +/- 5% Some images are examples of a refurbished automatic spray machine of the same type._____Optionally, we can also provide you with a quote for installation and commissioning of the system, as well as employee training Upon request, we also offer regular maintenance and servicing of the machine. For further information, please feel free to contact us!

Condition: used, Year of construction: 2000, Giardina paiting line Knjdpfxszvgize Apmja 2 roller 2 oil or stain spreding brush

Condition: used, Year of construction: 2014, A high-performance, fully operational industrial roller coating line by CEFLA. All machines are from the 2014 and operated continuously until the end of 2024 (discontinued only due to the end of production), well-maintained, and ready for immediate integration into production. This setup is perfect for furniture factories, flooring manufacturers, and door producers seeking top-tier automation and flawless surface finishing Line Composition (15 Units Total): Fully operational: Coating & Filling Machines: 4 units - Smartcoater MF-EVO Roller Coaters 1 unit - CEFLA SP1-EVO Roller Filler/Spackling Machine UV Curing Ovens: 2 units - CEFLA UV-R M1 Curing Ovens 2 units - CEFLA UV-R M2 Curing Ovens Transporters: Kodpfezu Rufox Apmsna 2 units – CEFLA TB900 Transfer Conveyors Dimensions: 900 x 1580 x Adjustable Height 860–940. Non-operational - for spare parts/repairs: 4 units – CEFLA Smartcoater MF-EVO Roller Coaters

Condition: used, Sturdy Lübbers hay-drying trolleys with an adjustable central rake. Kjdpoztvvrjfx Apmjna Technical data: - Length: 3,500 mm - Width: 1,000 mm - Height: 2,000 mm - Load capacity: approx. 700 kg

Condition: used, Hymmen CombiCoater ELX-S 1400 coating system with UV curing unit. Technical specifications to follow shortly For self-assembly and collection Kodpfx Apjztvvljmena

Condition: used, Year of construction: 2014, machine/vehicle number: A14 02 009-0040, With paper web and belt conveyor with web cleaning.System consisting of: 1. Feeding conveyor 2,000 mm 2. Spraying machine 3,630 mm 3. Take-off roller conveyor 2,000 mm - Total length: 7,630 mm - Operator side: leftItem 1 Feeding belt: - Manufacturer: Venjakob - Model: Belt Conveyor AL - Year of manufacture: 2014 - Feed rate: approx. 2.5–5 m/min. - Max. load: 15 kg/m - Length: 2,000 mm - Motor power: 0.5 kW - Variable-frequency drive (VFD) controlledItem 2 Automatic Spray Machine:Can be operated with either the belt conveyor system or the paper belt conveyor system!- Manufacturer: Venjakob - Model: VENSPRAY Smart - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 920 mm ± 20 mm - Operating side: left - Suitable for solvents and Ksdjztf Nhopfx Apmsna water-based coatings - Price for a refurbished machine - As-is condition; machine has not been refurbished - Spray gun drive in Duo configuration - Dry extraction - Exhaust port diameter: 400 mm - Exhaust air flow rate: 7,000 m³/h - Feed speed: infinitely adjustable ~ 2.5–5 m/min - Light curtain, part detection, Type LS 25 - Touchscreen control - Paper belt transport system - Belt squeegee and cleaning system Type R1 - Number of paint circuits installed: 2 - Number of spray guns installed: 4 - Quick-change system for spray guns - Spray guns, Type Kremlin Airmix AVX - Airmix spray system - Number of paint pumps: 1 - Pump manufacturer: Wagner Cobra 40/25 - Length: 3,630 mm - Width: 3,450 + 990 mm - Total power consumption: 16 kW - Location: not in stock - Voltage fluctuations: max. ±5%Item 3 Acceptance of roller conveyor: - Manufacturer: Venjakob - Type: Roller conveyor - Year of manufacture: 2014 - Feed rate: approx. 2.5–5 m/min - Max. load: 15 kg/m - Length: 2,000 mm - Roller spacing: 150 m - Variable-frequency drive controlled Images are for illustrative purposes only; they are not originals*

Condition: good (used), Year of construction: 2004, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2004 Product number: 04177/1 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns -1 ÷ 4 bar Working air pressure for opening the guns - 5 ÷ 6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min TRANSPORTER TRC2500 Producer: CEFLA Type: TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter, 2500 mm long and 1250 mm working width, with two speed ranges: low from 1.7–11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min. Main engine power 1.72 kW. OVEN UNISON 12 M Producer: UNISON Type: UNI-LEVEL 6/12 Year of production: 2010 Length 13500 mm Width 2600 mm Height 2510 mm Weight 6950 kg Power supply 3 x 400 VAC, Hz Air pressure 0.6 Mpa The shelf dryer is used for hot air drying of painted elements in the automatic varnish machine that applies paint coatings using the spray method. The drying room has 6 shelves - each 12.2 meters long. The rated speed of the main conveyor is 4 m / min. TRANSPORTER MCRS PRN 6,3 with belt transformer (II) Kjdpfozumxmsx Apmena Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/5

Condition: good (used), Year of construction: 2005, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2005 Product number: 05026/4 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns - 1÷4 bar Working air pressure for opening the guns - 5÷6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min ROLLER TRANSPORTER type PRN-6.3 Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/1 Working height - 920 mm +/- 50 Roll working width -1610 mm Total width - 1700 mm Roll diameter - 53 mm Total length - 6300 Movement speed - 20 m / min Weight - 320 kg Power supply - 400V 50Hz 6 bar TRANSPORTER PPR1050 Producer: CEFLA Type: PPR 1050+ TRC2500 / 2V / 125 Ksdszumvxjpfx Apmsna Year of production: 2005 Product number: 05026/14 Transporter with a length of 1050 mm and a working width of 1250 mm with two speed ranges: low from 1.7-11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min (for the time of loading into the dryer carousel). Main engine power 1.72 kW. TRANSPORTER TRC2000 Producer: CEFLA Type: TRC 2000/125 Year of production: 2005 Product number: 05026/1 Transporter with a length of 2000 mm and a working width of 1250 mm. The transporter is driven by a 0.25 kW engine and reaches a speed of 1.7-10.7 m / min. CEFLA OVEN (drying room) Producer: CEFLA Year of production: 2005 Machine for the complete or partial drying of paint products that are applied to the parts to be treated, such as linear panels of all kinds. Vertical two-zone platform oven with warm air drying. Evaporation fan flow - 2x8000 m3 / h Drying fan flow - 8000 m3 / h Installed thermal power - 130,000 Kcal / h Total installed power - 17 kW Compressed air consumption - 92 Nl / min Platform length - 3500 mm Overall dimensions - 5192x4120x4524 mm TRANSPORTER TRC3500 Producer: CEFLA Type: TRC 3500 / 2V / 125 Year of production: 2005 Product number: 05026/16 A conveyor with a length of 3500 mm and a working width of 1250 mm with two speed ranges: low from 1.7 m / min and high up to 10.7 m / min - for the time of unloading from the carousel dryer. Main engine power 2.2 kW.

Year of construction: 1998, condition: ready for operation (used), An automatic Venjakob flat surface spray coating system is available. Coating material: water-based coating, working width: 1300mm, max. passage height: 70mm, working height range: 880mm-920mm, min. workpiece dimensions X/Y: 100mm/200mm, max. workpiece dimensions X/Y: 1200mm/3000mm, max. coating material pressure: 200bar, working speed: 3m/min. An on-site inspection is possible. Kodpfx Apszh Ng Hemsna

Year of construction: 2016, condition: ready for operation (used), A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible. Knedpfjxtfgyjx Apmoa

Year of construction: 1993, condition: ready for operation (used), A complete paint shop is available. 1) Sergiani S.p.A. Monomatic S, year of construction: 2001. 2) Finnrose FLT 6, year of construction: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of construction: 1993. 6) Karl Heesemann FGA 6 EX, year of construction: 1993. 7) Finnrose FLT-4.5, year of construction: 1993. 8) Bürkle DAL2-1300, year of construction: 1985. Hackemack KTR 2040, year of construction: 1996. All machines are part of a paint shop. On-site inspection is possible. Knodpjtpp H Ejfx Apmsa

Year of construction: 2015, condition: ready for operation (used), A surface roller coating machine Trivec including a custom-built distributing unit with 6 units for oil and varnish application is available. Working width coating machine/distributing unit: 450mm/350mm, coating and metering stations: 2, feed rate: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/700mm/1650mm. An on-site inspection is possible. Knedpsynltdefx Apmja

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Kodszinzlepfx Apmona Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition