Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW Nljdpfx Afsgr Er So Ejh 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, Nedpsxrb Rfefx Af Eolh freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: new, Year of construction: 2024, working width: 950 mm min. workpiece height: 4 mm max. workpiece height: 170 mm Njdpfxoknyhlj Af Ejlh height adjustment: electrically read out height: digital electronic control: Fox 500 KTR aggregates: 1 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad dust brush: no motor power: 7,5 kW suction connection: 140 mm machine length: 1388 mm machine width: 1545 mm machine height: 1668 mm weight: 660 kg

Condition: used, Used machine Features and technical data: Working width: 300 mm Nlodexq Ua Rjpfx Af Ejh Sanding belt oscillation: mechanical Roller guide: rubber-coated Sanding unit: with sanding shoe Feed speed: 2-stage Feed direction: reversible (forward/reverse) Motor start: star-delta Power supply: 380 V Weight: approx. 450 kg Availability: short-term Location: Baden-Württemberg

Condition: excellent (used), CATALOG NUMBER 5799 TECHNICAL DATA - Maximum workpiece width: 230 mm Nsdjfndhzepfx Af Eelh - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm - 2 sanding units: - Top and bottom + platen * Top: - 2 pressure rollers, slip type, metal - Pressure mechanism - Sanding unit: 2 metal rollers + platen - Slip-type pressure roller - Feed belt * Bottom: - Feed belt - 2 metal rollers, slip type, smooth - Pressure mechanism - Sanding unit: 2 metal rollers + platen - 3rd metal roller, slip type, smooth - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Infinitely variable feed speed adjustment via inverter: 3–15 m/min - Feed motors: 2 × 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air requirement: 6–8 bar - Extraction nozzle diameter: 4 × 100 mm - Overall dimensions (L/W/H): 2340 × 1420 × 1920 mm - Weight: 1480 kg – Suitable for short workpieces (belts overlap) – German-manufactured – Very good condition – Not repainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1997, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibration roller Diameter of 1st roller: 150 mm Design of 1st roller: grooved rubber roller 90 degrees Shore Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1120 mm Sanding belt speed of 1st unit: 18 m/sec Drive of unit 1: 11 kW 2nd belt: Sanding unit shoe Sanding shoe of 2nd unit: electronic individual links 45 mm segment width Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1120 mm Sanding belt speed 2nd unit: 18 m/sec Drive of 2nd units: shared motor with 1st unit with rigid sanding pad for solid wood and frame sanding. Lacquer sanding possible: No. Fixed feed speed: 5/10 m/min. Control: Hand control panel. Electric/pneumatic belt oscillation: Yes. Table lift: Electric. Table display: Digital. Operating pressure: 6 bar. Machine number: E / 79191. Dimensions: 1930 x 1700 x 1980 mm. Motor power: 12 kW. Extraction diameter: 2 x 150. Storage location: Nattheim. Nsdpfxexq Apte Af Eolh

Condition: used, Year of construction: 1993, functionality: fully functional, grinding width: 1,350 mm, grinding height: 150 mm, working height: 150 mm, height adjustment type: electric, workpiece height (max.): 150 mm, - Very good condition - Year of manufacture: 1993 - Electronic PLC control: Heesemann - Model / Type: LSM 6 TECHNICAL PARAMETERS: - Working sanding width: 1350 mm - Max. thickness of workpieces: 150 mm MACHINE CONFIGURATION: I – Cross sanding unit (sergeant type) with sequential electronic pressure - Main motor: 13 kW - Pneumatic photo sensor oscillation - Extraction port: 1 x 180 mm - Sanding belt size: 5480 x 150 mm Nlsdpew H Sk Tofx Af Ejh II – Combination unit with pad - Main motor: 13 kW - Belt cleaning system with oscillation - Pneumatic pad pressure - Pneumatic photo sensor oscillation - Extraction port: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm - PNEUMATIC PHOTO SENSOR OSCILLATION - Pneumatic bar cleaning system with oscillation for cleaning belts III – Combination unit with pad - Main motor: 13 kW - Sanding belt cleaning system - Pneumatic pad pressure - Extraction port: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm IV – Cleaning brush unit for workpiece behind the main unit at the outfeed - Motor: 1.1 kW - Extraction port: 1 x 140 mm - Feed regulated by gear motor: 4 kW feed motor - Feed speed: 6–26 m/min - Air requirement: approx. 28 m/sec, 4340 m³/h - Compressed air consumption: approx. 800 l/min - Feed belt: 5-segment - Pneumatic feed belt cleaning system - Automatic sanding height adjustment with electronic display - Motor: 0.55 kW - Suitable for sanding lacquer and intermediate sanding between coats - Dimensions (LxWxH): 3750 x 3230 x 2300 mm - Weight: approx. 8000 kg

Condition: good (used), Year of construction: 2014, Drive 1.5 kW Belt speed 16 m/sec Nlsdpfx Aexqy S Ssf Esh Belt width 150 mm Belt length 2270 mm Table size 680 x 310 mm Required space approx. 1350 x 600 mm Weight approx. 162 kg Extraction ports 2 x 100 mm All information has been taken from a brochure, therefore provided without guarantee. Technical data on request – see images for equipment details.

Condition: new, Year of construction: 2023, working width: 1100 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically workpiece thickness display: digital aggregates: 2 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller Link grinding shoe: elastic, sector distance 56 Electronic control: FOX 500 KTR dust brush: no motor power: 15 kW suction connection: 2 x 140 mm machine length: 1650 mm machine width: 1820 mm machine height: 1960 mm Nodpfx Ajirmg Ujf Eolh weight: 1170 kg

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: - The conveyor belt integrated into the table is driven by a geared motor. - The built-in dial gauge on the handwheel and at the front of the table allows for precise monitoring of material removal. - The machine is designed on the principle of thickness reduction (thickness planing), which means uniform material removal and grinding accuracy to within 0.1 mm. - Optimal grinding pattern thanks to the oscillating sanding belt. - No belt misalignment due to pneumatically controlled oscillation. Nlsdoww Raijpfx Af Esh - Sanding belt length: 1600 mm - Sanding belt width: 200 mm - Table length: 1000 mm - Working height: 120 mm - Drive motor: 5.5 kW Availability: short-term Storage location: Flörsheim

Condition: excellent (used), CATALOG NUMBER 7324 Technical specifications: - Max workpiece width: 200 mm - Max workpiece height: 190 mm 2 sanding units: - Top: metal roller + pad + metal roller - Bottom: metal roller + pad + metal roller Nodpfsvt Alwex Af Eelh Top side: - 2 rubber, traction pressure rollers - sanding unit - slip roller - 2 rubber, traction pressure rollers Bottom side: - sanding unit - side guide bar - electrically adjustable sanding height 0.37 kW - 6 feed speeds + right/left: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor: 0.6 kW - main motors: 2 x 4 kW - extraction port diameter: 80 mm, 90 mm - overall dimensions (L/W/H): 1830 x 860 x 1760 mm - weight: 630 kg – not painted – used sanding machine, in very good condition Net price: 12,500 PLN Net price: 2,970 EUR (exchange rate 4.2 EUR) (Prices may change in case of significant fluctuations)

Condition: used, This Holzkraft edge sanding machine, model: KSO 1500, is being auctioned online as part of our industrial auction / machinery auction for the liquidation of the Holzbau Hahn site – Hundegger processing line – woodworking machines – commercial vehicles – tools – material – containers – shelving. Nodpfsxqv Euex Af Ejlh You can find this and many other items on our platform.

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Njdpfx Afoxqggcj Eelh Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: used, Year of construction: 2019, functionality: fully functional, working width: 1,000 mm, grinding width: 1,000 mm, grinding height: 125 mm, height adjustment type: electric, type of input current: three-phase, TECHNICAL SPECIFICATIONS: - Working width: 40-1000 mm - Minimum element length: 470 mm - Min/max pass-through height: 3-125 mm - Infinitely variable feed speed: 6-30 m/min Nljdpfexqfxkex Af Esh 1. SANDING UNIT: - Spiral-milled steel contact roller, diameter 220 mm - Motor power: 22 kW / 400 V - Sanding belt speed: 19 m/s - Oscillating roller pressure system, rollers coated with vulcanized rubber, first roller equipped with anti-kickback system 2. COMBINATION UNIT WITH PAD: - Spiral rubber roller, diameter 190 mm + steel roller, diameter 100 mm - Motor: 15 kW / 400 V - Sanding belt speed: 18 m/s - Adjustable pressure pad - Pneumatic oscillation - Automatic conveyor belt tracking - PLC digital display - Pneumatic belt tensioning - Pneumatic sanding belt cleaning (both units) - CONTINUOUS FEED SYSTEM, motor power: 2.2 kW - AUTOMATIC GRINDING HEIGHT ADJUSTMENT, 0.37 kW 3. POLISHER UNIT – BRUSH at outfeed, motor power: 0.37 kW - Automatic unit braking (pneumatic brakes) - Air pressure: 8 bar - Air consumption: 0.9 m³/min - Extraction air requirement: 7,500 m³/h - Abrasive belt size (W × L): 1,030 × 2,200 mm - Exhaust air velocity: 25-30 m/s Machine dimensions: - Length: 2,265 mm - Width: 1,740 mm - Height: 2,180 mm - Weight: 3,000 kg

Year of construction: 2015, condition: used, machine/vehicle number: 12162, Technical data: - Manufacturer: Löwer - Type: DM 3DBB 400 - Year of manufacture: 2015 - Max. brush width: 1,350 mm - Max. brush diameter: 400 mm - Max. working height: 100 mm - Brush motor – rated power: 2 × 2.5 kW - Brush motor speed: 1,410 rpm - Feed motor – rated power: 1.5 kW - Feed motor – speed: 935 rpm - Disc motor – rated power: 2 × 1.5 kW - Disc motor speed: 1,410 rpm - Disc speed: 50–350 rpm - Vacuum motor – rated power 7.5 kW - Vacuum motor – speed 2,800 rpm - Height adjustment motor – rated power: 0.45 kW - Height adjustment motor – speed 1,410 rpm - Brush speed 30–350 rpm - Feed speed 3–15 m/min. - Weight: 1900 kg 2.5 ELECTRICAL CONNECTION - Operating voltage 400 V - Frequency 50 Hz - Fuse provided by customer 63 A - Full load current: 47 A - The cross-section of the supply cable must be at least AWG 2 (25 mm²). Nsdpjxqf I Esfx Af Eolh 2.6 PNEUMATIC CONNECTION - Operating pressure 6–8 bar - Maximum pressure 8 bar 2.7 EXHAUST CONNECTION - Connection size 4 x Ø = 140 mm - Air requirement 1,108 m³/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Negative pressure at the extraction connection 1,180 Pa For blowing device: - Connection size 3 × Ø = 80 mm - Air requirement 390 m³/h per connection - Minimum air speed at the connection on the machine 20 m/s - Negative pressure at the suction connection 950 Pa - Vacuum outlet 1 × Ø = 200 mm, 300 m³/h

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Sanding width: 1100 mm Sanding belt length: 1900 mm Workpiece thickness: 3-150 mm Feed speed: infinitely variable, 2.5 - 13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 sanding shoe unit: with air-cushion sanding shoe Drives: 1st sanding unit: 15 kW 2nd sanding unit: 15 kW 3rd sanding unit: 11 kW with infeed table extension with outfeed table extension Total connected load: 43 kW Extraction capacity: approx. 6750 m³/h Air velocity: 20 m/s Nedpfxjwka S Uj Af Eslh Compressed air connection: 6-8 bar Air requirement: approx. 30 l/min Dimensions: 1750 x 2740 x 1890 mm Weight: 3100 kg Availability: short notice Location: 65439 Flörsheim

Condition: excellent (used), CATALOG NUMBER: 6145 TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 140 mm 3 units: 1) Calibrating grooved rubber roller – 15 kW 2) Calibrating grooved rubber roller – 11 kW 3) Calibrating grooved rubber roller – 11 kW From above: - Sliding metal roller - Sliding rubber roller - Unit Nsdpolrvi Esfx Af Eelh - 2 sliding rubber rollers - Unit - 2 sliding rubber rollers - Unit - Sliding rubber roller From below: - Infeed table: 3600 x 1000 mm - Feed speed regulated via inverter 0.25 kW - Traction belt - 3 ejection sliding rubber rollers - Pneumatic belt oscillation with photocell control - Belt blowing - Electric table elevation adjustment – lifting motor 0.75 kW - Smooth feed speed control – feed motor 2.2 kW - With vacuum pump – pump motor 4 kW - Extraction port diameter: 110 mm, 80 mm - Operating pressure: 6-8 bar - Extraction connector diameters: 3×150 mm, 3×200 mm - Overall machine dimensions (LxWxH): 3400 x 2300 x 2800 mm - Feeder dimensions (LxWxH): 3000 x 1300 x 900 mm - Pump dimensions (LxWxH): 600 x 950 x 940 mm - Weight: approx. 5000 kg Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical specifications: Njdpfewkbcbex Af Eslh - Grinding unit can be swiveled via hand crank - The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation - Oscillating sanding belt with a separate geared motor for improved sanding results - Oscillation can be optionally switched on - Graphite-coated sanding shoe for longer sanding belt service life - Height-adjustable sanding table allows use of the full sanding belt width - Additional table for sanding radii with integrated extraction ports - Spring-loaded belt tensioning system automatically compensates for differences in belt length - Equipped with adjustable stops, making it ideal for veneer sanding - Veneer overhang can be easily sanded down - With mobile undercarriage - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm - Grinding unit swivel range: 0–45° - Worktable length: 950 mm - Worktable width: 450 mm - Worktable height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Catalogue number 6349 TECHNICAL DATA - Max. workpiece width: 250 mm - Max. workpiece height: 110 mm 2 sanding units: top and bottom Top side: - 2 slip-feed pressure rollers - Sanding unit with 2 metal rollers + pad - Slip-feed pressure roller - Rubber feed belt – VACUM Bottom side: - Feed belt - 2 slip-feed metal rollers - Sanding unit with 2 metal rollers + pad - 3 metal outfeed drive rollers - Paper cleaning system on upper and lower sanding units - Electrically adjustable sanding height - Oscillating sanding belts - Infinitely variable feed speed via frequency inverter - Main motors: 2 × 5.5 kW - Air requirement: 8 bar Nsdpfshby R Asx Af Eslh - Extraction port diameter: 4 × 100 mm - Overall dimensions (L/W/H): 1400 × 1200 × 1850/2250 mm - Weight: 1,490 kg – For short workpieces (VACUM belts) – German-made – DTR documentation available – Unpainted – Used sander, in very good condition Net price: PLN 26,900 Net price: EUR 6,400 (depending on exchange rate of 4.2 EUR) (Prices may vary in case of large fluctuations)

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: Absolutely as new, machine is unused Features and technical data: 2-belt machine; 1st belt: roller, 2nd belt: platen - Usable working width: 1100 mm - Sanding belt dimensions: 1120 x 2150 mm - Maximum workpiece thickness: 160 mm - Steel calibration roller: 150 mm diameter - Width of sanding platen: 50 mm - Belt motor power: 11 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Feed belt with continuously adjustable speed via variable-speed gearbox - Feed speed: 4/20 m/min - Height adjustment motor: 0.24 kW - Mechanical belt oscillation "Eco Gear Patent System" - 1 unit drum brake for belt braking Njdpfx Ajw E Ty Uef Ejlh - Swivelling roller for belt tensioning - 3 pressure rollers, rubber-coated - Emergency stop bar at infeed - Electronic display of workpiece thickness - 2 roller conveyors, each with 2 rollers at infeed and outfeed - 1 extraction nozzle, 160 mm Ø - Automatic table positioning New patented belt oscillation system - No valves - No photoelectric barriers - Not sensitive to dust - Energy saving, environmentally friendly system Since 2008, this machine model with the above system has operated continuously without lateral belt run-out! Including Unitek belt motor power upgrade: 14.7 kW instead of 11 kW (Promotor) Including Unitek pneumatic sanding platen with control synchronized to feed speed Availability: Short-term Location: Saxony-Anhalt

Condition: excellent (used), CATALOG NUMBER 6582 TECHNICAL DATA - Maximum workpiece width: 920mm - Maximum workpiece height: 150mm 2 units: 1) Grooved rubber calibration roller 11kW 2) Grooved rubber calibration roller + belt air blowing 7.5kW From above: - 2 rubber feeder rollers - Unit - 2 rubber feeder rollers - Unit - 2 rubber feeder rollers From below: - 3 rubber feeder rollers - Conveyor belt - Pneumatic belt oscillation - Electric table elevation - Stepless feed speed adjustment - Working pressure: 8-10 bar - Pneumatic brake - Extraction nozzle diameter: 2 x 160mm - Overall dimensions (L/W/H): 1600 x 1460 x 2000 mm Nedpfx Ash Huhtjf Ejlh - Weight: approx. 1305kg – Made in Germany – 2 units – Used sander, very good condition Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Features and technical data: - Constant working height - Equipped with combination unit featuring steel contact roller and electronic CPS segmented pressure beam with 25 mm divisions - Sanding width: 1100 mm - Sanding belt length: 1900 mm - Workpiece thickness min./max.: 3 - 150 mm - Feed speed: infinitely variable, 2.5 - 13 m/min - Sanding unit: 11 kW Paint package: - Infinitely variable belt drive speed via frequency inverter - Belt air-blast device - Vacuum conveyor belt with blower Nlodowka Snopfx Af Eeh Control: - Terminal with 50 program memory slots - Simple menu guidance with plain text display - Visual indication of active elements during operation - Fully automatic PLC-controlled start sequence for all drives - Digital recording of operating hours Includes cleaning brush Roller table at infeed Roller table at outfeed Extraction capacity: 1850 m³/h Extraction connectors: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection: 6-8 bar Air requirement: 10 l/min Weight: 2,200 kg Availability: by arrangement Location: Röllbach

Condition: excellent (used), Catalogue number 7431 TECHNICAL DATA - Max workpiece width: 950mm - Max workpiece height: 150mm Top: - Metal pressure roller - Unit (profiled rubber roller for calibration + pad shoe + metal roller) - Smooth, metal sliding roller Bottom: - Feed belt - Pneumatic oscillation of belts with photocells - Electric table lifting - 2 feed speeds Nedoua Dvropfx Af Eolh - Main motor: 7.5 kW - Feed motor: 0.6 kW - Table lifting motor: 0.18 kW - Working pressure: 8 bar - Extraction connection diameter: 150mm - Dimensions (L/W/H): 1600x1250x2000mm - Weight: 1109 kg ADVANTAGES – German manufacturing – Additional pad shoe included – Used sander, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (at exchange rate 4.2 PLN/EUR) (Prices may change depending on exchange rate fluctuations)

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Scope of delivery: - Table extension - Rubber rollers With veneer edge sanding device with contact shoe With fine adjustment and fence rulers With grooved infeed fence for veneer overhangs Quick switch between veneer edge and solid wood sanding possible Approximate dimensions: Length (product): 1900 mm Width/Depth (product): 900 mm Nlodpfx Ajw I Up Uof Eeh Height (product): 1350 mm Net weight: approx. 290 kg Oscillation motor power: 0.25 kW Extraction port diameter: 140 / 100 mm Height adjustment of longitudinal table: 230 mm Min. cross table height: 720 mm Working table length: 960 mm Working table width: 350 mm Working table height adjustment: 230 mm Connection voltage: 400 V Phase(s): 3-phase Current type: AC Mains frequency: 50 Hz Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt running speed(s): 20 m/s Oscillation stroke: 20 mm Sanding surface length: 1050 mm Sanding surface width: 200 mm Includes: 1 pack sanding belts K 80 1 pack sanding belts K 120 Availability: short-term Location: Hochheim

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units Nlodpevxuxmofx Af Eoh – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)