Used Panel Saw Panel Saw for sale (16,483)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 220.242, cutting length (max.): 4,300 mm, saw blade diameter: 350 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Maximum saw blade diameter (S): 350 mm Scoring blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Minimum panel thickness (P): 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Kdjdpfsx Sqpmox Ah Neg Additional Specifications Maximum clamp opening (K): 90 mm Working height: 970 mm Overall height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at feed-in) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Power and Speeds Main saw motor power: 15 kW Saw carriage forward speed: 5 – 120 m/min Saw carriage return speed: 120 m/min Feed-in forward speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Feed-in return speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting length (max.): 2,200 mm, cutting width (max.): 4,300 mm, TECHNICAL DETAILS Max. cutting length: 2,200 mm Ksdpfjx Tptmjx Ah Njdg Max. cutting width: 4,300 mm MACHINE DETAILS Transport packages: 8 pcs.

Condition: good (used), Year of construction: 2011, Panel saw HOLZ-HER Model: 1255 Condition: used Year of manufacture: 2011 Cutting length: 6300 mm (max) Vertical cutting height: 2200 mm (max) Horizontal trimming height: 2200 mm (max) Workpiece thickness: 60 mm (max) Scoring height horizontal: trimming height Scoring height horizontal: 2040 mm (max) Voltage: 400V 50 Hz Weight: 920 kg Kodpfxox Hyr Hs Ah Nedg Equipment: - Operating manual - Next UVV safety inspection: 05/2026

Condition: used, machine/vehicle number: 006645, Max. panel width: 5600 mm Max. panel length: 2850 mm Kodpjv Ir Scefx Ah Nodg Main saw blade projection: 125 mm No of Grippers: 11

Condition: used, machine/vehicle number: 008158, Max. panel width: 4300 mm Kjdpfx Ahsw Tiv Hj Njdg Max. panel length: 2200 mm Main saw blade projection: 120 mm No of Grippers: 9 Second flexible pusher: yes Panel Rotation Station: yes Thin sheet loading: yes

Condition: used, Year of construction: 1977, Cutting area: 5300 x 2200 mm Kjdpfxeyaq Ece Ah Nedg Wall mounting Space requirement: 6300 x 2820 mm Wooden slats Good condition Price ex location Transport available at additional cost!

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Kodpjwka Ntsfx Ah Nodg Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short-term

Condition: used, machine/vehicle number: 007655, Position 1: Angular Beam Panel Saws HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 2: Panel Stacking and Offloading HOLZMA + BARGSTEDT-PROFI HKL + TSP Kodpfxjwuz Iro Ah Njdg Position 3: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 4: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP

Condition: used, machine/vehicle number: 008113, Max. panel width: 3800 mm Kodpfx Aew Iddhjh Nsdg Max. panel length: 3200 mm Main saw blade projection: 75 mm No of Grippers: 7

Condition: used, machine/vehicle number: 008177, Max. panel width: 4300 mm Kdedpfx Ahsx A Tams Neg Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 7

Condition: excellent (used), Catalogue number 7834 TECHNICAL DATA - Maximum diameter of main blade without scoring unit: 400mm - Maximum blade diameter with scoring unit: 350mm - Maximum cutting height for 350mm blade: 100mm - Main blade adjustable up/down and tiltable - Large blade guard - Spindle diameter: 30mm - With sliding table - Cutting length on sliding table: 1400mm - Cutting width at fence: 1180mm - With side table - Fence on side table adjustable at an angle - With scoring unit Kodpfx Ajx Arrhsh Njdg - Maximum scoring blade diameter: 120mm - Spindle diameter: 20mm - Main blade motor power: 4kW - Scoring unit motor: 0.75kW - 2 rotation speed settings - Table dimensions: 1120x1020mm - Table dimensions with extension: 1820x1720mm - Extraction nozzle diameter: 130mm - Dimensions L/W/H: 3650x2150x1450mm - Weight: 720kg ADVANTAGES – Made in Poland – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11,900 PLN Net price: 2,840 EUR (depending on the rate 4.2 EUR) (Prices may vary with significant rate fluctuations)

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, 4204222400513 SVP 420 1x 807548 Length stop for repetitive cutting of horizontal strips 1x 8059021 Digital display on the vertical saw cut 1x 807560 Digital display on the horizontal saw cut Kdsdpfxoya H Rze Ah Nog 1x 93200000974 Saw blade Ø 250mm Z 48 AK 1x PUTSCH1 Central vacuum ECO NEW

Condition: used, Year of construction: 2003, Cutting capacity: 5300 x 2240 x 80 mm Motor: 5.5 kW (7.5 HP) Saw blade: 300 mm Vertical cutting interface distance: 1000 mm Feed speed: 10-25 m/min Four-sided edging Pre-scoring saw unit freestanding Storage location: Nattheim Kedpsx Twdajfx Ah Nodg

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Kdodpfx Ahox Twcvs Nog

Condition: ready for operation (used), saw drive: 4,600 W, Holzher PK 1220 automatic Super Cut - automatic feed with 2 speeds (selectable over the full or half length, with or without automatic return) - strip stop - still under power, inspection possible Kjdoyatdhspfx Ah Nsdg Cutting width: 5300 mm Edging height: 2100 mm Passage height: 2200 mm Cutting depth: 80 mm Saw unit tiltable: 90° Motor power: 4.6 kW Saw blade: 300 mm Weight: approx. 1000 kg Required room height: 2895 mm Length: 6555 mm Ex location Dismantling and loading available at extra charge

Condition: used, Year of construction: 2022, operating hours: 400 h, total length: 80,000 mm, total height: 20,000 mm, total width: 24,000 mm, Weight: 5.000 kg Price: On request Homag Sawteq B-130 Year: 2022 Serialnumber: Specification: 3200mm cutting width and length 65mm blade projection Program fence speed forward 25m/min Program fence speed backwards 60m/min Clamps 50, 250, 450, 1200, 2000, 2700mm 4 Manual trim stops Saw carriage speed 60m/min Main saw motor 7.5kw Scoring saw unit Intelliguide optical LED assistance Kjdpfx Aowu E Eueh Nedg 1 air table 2100 x 650mm with roller element 2 air tables 1800 x 650mm with roller elements 21.5 inch touch screen display CAD Plan 4 optimising software  - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 400 - Main motor power [kW]: 7.5 - Control: CADmatic 5 - Software: CADPlan 4  - Saw blade bore diameter [mm]: 60 - Max. saw blade diameter [mm]: 310 - Max. cutting length [mm]: 3200 - Max. cutting width [mm]: 3200 - Options: Voorritser, Optimalisatieprogramma - Feed speed: - └ Max. feed speed [m/min]: 60 - Scoring unit: - └ Scorer bore diameter [mm]: 45 - └ Scorer blade diameter [mm]: 150 - Transport dimensions: 80000mm x 24000mm x 20000mm (l x w x h) - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, machine/vehicle number: 007829, Position 1: Front-Loading Panel Saws SCHELLING-FH 4 430/220-P Kjdjwu Ahgopfx Ah Nedg Position 2: Automated Warehouse SCHELLING-FH 4 430/220-P

Condition: good (used), Year of construction: 2004, Sawblade tiltable 45 ° Length of the rolling table 2000 mm cutting width 1270 mm Kdsdpfjx Ti Dfox Ah Neg Motor output 4,0 kW Cutting height 100 mm Saw blade diameter 315 mm

Condition: excellent (used), Catalogue number: 7791 TECHNICAL SPECIFICATIONS - max diameter of main blade with scorer: 350mm - max cutting height: 105mm - main blade adjustable up/down + tilt - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on the sliding table: 1430mm - cutting width at rip fence: 1000mm - with side table - with scorer - max scorer diameter: 80mm - scorer spindle diameter: 20mm - main motor: 5.5kW - extraction port diameter: 100mm Kdedpfjxpvk Iox Ah Nog - table dimension: 115x625mm - table size with extension and widening: 2150x1105mm - blade guard - 3 blade speeds: 3200/4500/6000rpm - dimensions (L/W/H): 2300x3350x1520mm - weight: 746kg Net price: 11,900 PLN Net price: 2,830 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2012, Very well-maintained panel saw, from a one-man operation, with very low usage. Maximum panel size approx. 3.2 x 2.2 m Kodsyagrxspfx Ah Nedg

Condition: excellent (used), Year of construction: 1997, still a very nice panel saw 2 m sliding table 7.35 kW motor Location: Freiburg area Kdedpfxsyagpqo Ah Neg

Condition: used, Type 693 Euro5 Year: 1996 General data Cutting length: 3200 mm Cutting width: 2650 mm Max. cutting height: 60 mm Main saw Speed: 2870 rpm Power: 5.5 kW Max. Ø280 mm Scoring saw Speed: 2850 rpm Power: 1.1 kW Max. Ø125 mm Kdjdpjyac Ebjfx Ah Njg Total connected load: 8 kW Machine weight: 3150 kg

Condition: new, functionality: fully functional, TECHNICAL DATA: - Maximum horizontal cutting length: 2500 mm - Maximum vertical cutting length: 2200 mm - Maximum vertical cutting height: 1600 mm - Maximum horizontal cutting height: 1400 mm - Maximum cutting thickness: 60 mm - Motor power: 5 HP (3.7 kW) - Blade diameter: 250 mm - Blade speed: 5300 rpm Kedpfsx S Egaex Ah Nsdg

Condition: used, Year of construction: 1992, functionality: fully functional, 1 unit Panel Saw TK UNIVER SVP 950M Kdodpsx Szycefx Ah Njg Operating hours: 1054h, as per pictures and inspection, self-dismantling Color: green Year of manufacture: 1992 Dimensions (L/W/H): 600x250x80 cm Condition: used Payment method: advance bank transfer Storage location: joinery/workshop hall 1 Shipping: Collection only – no shipping available for this item!

Condition: used, Year of construction: 2009, functionality: fully functional, cutting length (max.): 3,800 mm, cutting height with scoring (max.): 80 mm, saw blade diameter: 380 mm, cutting height (max.): 100 mm, main saw diameter: 380 mm, input voltage: 380 V, GIBEN SMART panel saw with front loading, cutting capacity 3800 mm, in working condition. Kdjdpfx Ahsx U Emrj Njg