Used Mayer Panel Saws for sale (28)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 542798, cutting length (max.): 4,200 mm, cutting height with scoring (max.): 80 mm, saw blade diameter: 355 mm, cutting height (max.): 80 mm, main saw diameter: 355 mm, total length: 6,470 mm, total width: 6,450 mm, overall weight: 5,300 kg, saw drive: 9,000 W, input frequency: 50 Hz, input voltage: 400 V, power: 10.1 kW (13.73 HP), air pressure: 8 bar, saw blade bore: 30 mm, year of last overhaul: 2013, Equipment: scorer, Very well-preserved MAYER PS 9 Z panel saw, upgraded in 2013 (new PC, new PLC, new software, new control panel) Panel Saw Model PS9Z ECO - 4200 - Feed speed continuously adjustable from 5 - 70 m/min, return 80 m/min. - Dust channel for connection to extraction system - Pressure beam with central suction pipe - Automatic cutting length adjustment via sensor technology - Saw carriage runs on hardened and ground round guides. The drive is via rack and pinion (no chain), ensuring uniform feed and enabling high travel speeds. - Quick-release device for main and scoring saw - Saw hood interlock and louvered safety guard on the pressure beam - Recesses for package clamp in the pressure beam to enable complete cutting of panels without offcuts - Automatic cutting height adjustment (2 stages) - Swiveling control panel - Completely enclosed machine, especially in the pressure beam area - Transparent louvered safety guard allows operator to view the cutting line - Turret stop on the saw carriage The machine is dust-tested and bears the GS mark (No. 951061) as well as the CE mark (No. 951062) Saw motor: 9 kW Saw blade: 355 mm Cutting height: 80 mm Saw blade projection: 105 mm Cutting length: 4,200 mm Voltage: 400 V / 50 Hz Scoring unit - Scoring unit with pneumatic lowering during return, scoring motor 1.1 kW, for 127 mm scoring blade, convex. Left angular table 2000 x 600 air cushion - Air cushion angular table, on the left facing forward 2000 mm long, 600 mm wide, with 2000 mm long angle stop rail Auxiliary table 2000 x 600 air cushion - 3 auxiliary air cushion tables facing forward, size 2000 x 600 mm Material pusher travel distance 4200 mm - Double-guided material pusher, driven by rack and pinion and AC servomotor, forward speed 25 m/min, return 60 m/min - Separate measuring system via precision measuring racks and rotary encoder, rear support table with 11 twin roller tracks - Cutting length: 4,200 mm - Travel distance: 4,200 mm Package clamp opening height 80 mm - Package clamp on the material pusher (opening height 80 mm) with double-fingered design Pressing device 20 - 1200, automatic - Lateral pressing device operates automatically - For workpieces from 20 to 1200 mm - Manual presetting to workpiece width required automatic edging device - Device for automatic approach to the edging position by the material pusher Electronic control and PLC updated to PC6200 in 2013: - New PC - New software - New PLC - New control panel Iodpfxjxy Rwqs Adnja Machine is operational and can be inspected/tested at any time. A forklift is available for loading.

Condition: used, Year of construction: 2006, cutting length (max.): 3,200 mm, saw blade diameter: 650 mm, cutting height (max.): 200 mm, cutting width (max.): 3,200 mm, saw drive: 35,000 W, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, compressed air connection: 6 bar, sheet thickness aluminum (max.): 200 mm, space requirement length: 6,855 mm, space requirement width: 6,280 mm, space requirement height: 2,400 mm, working height: 1,100 mm, Mayer AL 160 Panel beam saw for aluminum and non-ferrous metals with a maximum package height of 200 mm. Technical data: Year of manufacture: 2006 Cutting length: 3,200 mm Cutting width: 3,200 mm Maximum package height: 200 mm Maximum material clamp opening: 210 mm Saw motor power: 35 kW Saw blade diameter: 650 mm Saw unit forward speed: 0.2 - 60 m/min. Saw unit reverse speed: 60 m/min. Material pusher forward speed: 10 m/min. Material pusher reverse speed: 20 m/min. Extraction connections: 1 x Ø 140 mm, 1x Ø 160 mm Pneumatic operating pressure: min. 5 bar, max. 6 bar Pneumatic compressed air requirement: 720 Nl/min. Working height: 1,100 mm Overall height: 2,400 mm Installation length: approx. 6,855 mm Installation width: approx. 6,280 mm Iodpfxjxx Anlo Adnsa Condition: The machine is largely functional and is currently in use in production.

Year of construction: 1999, condition: ready for operation (used), This MAYER PS9Z was manufactured in 1999. A robust horizontal panel saw, it features a powerful 12 kW motor and a cutting length of 4200 mm. Equipped with a scoring unit and pneumatic lowering, it ensures precise cuts. The saw includes air cushion tables and a material pusher with a 4200 mm travel distance. Consider the opportunity to buy this MAYER PS9Z panel saw. Contact us for more information about this machine. Isdsxp Spgopfx Adnja Application Types Sawing (Wood)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Mayer Format 4 Panel Saw Kappa 80 Automatic Year of manufacture: 11/2017 Operating hours: 425 Motor: 9 kW Pneumatic height adjustment of the pressure beam Stepless speed control of the motor Scoring unit with pneumatic lowering Angle table left 2300 x 600 mm with air cushion Iodpfxsw Niu Us Adnea 2pcs extension tables 2300 mm with air cushion Lateral pressure device Material pusher, cutting length 3200 mm Package clamp, 6 pcs single-finger design Automatic trimming unit HW panel saw blade D 320 mm Tapered HW scoring saw blade D 150 mm Approx. dimensions 5.5 x 6 m Weight: 4200 kg

Condition: new, functionality: fully functional, power: 18.02 kW (24.50 HP), Maximum precision and high cutting heights with rapid feed rates – this is only possible with an uncompromisingly stable gantry construction. This level of uncompromising stability is achieved by using a proven tubular steel framework. The thick-walled steel tubes are meticulously welded into a complex support frame by our experienced staff, requiring many hours of dedicated craftsmanship. This creates the solid foundation for the high-precision guide rails, along which the saw carriage, weighing several hundred kilograms, will later move. Perfect machine size for your workshop: 3200 x 3200 mm The machine allows the processing of workpieces up to 3200 mm in length and width. This means the saw carriage can execute cuts up to 3200 mm long. The material pusher can also be adjusted up to 3200 mm to the cutting line. Ijdswfdiyepfx Adnja Automatic cutting height adjustment up to 118 mm The powerful motor drives the saw blade through material at cutting heights up to 118 mm. For optimal cutting geometry, the blade should project about 10 mm above the workpiece. This optimizes energy consumption, noise emissions, and blade service life—a significant advantage for users. Every machine is therefore equipped as standard with automatic cutting height adjustment. The machine scans the height of the material and automatically sets the saw blade to the correct cutting height. Even when cutting multiple sheets in a stack, the saw blade drive must remain powerful. That’s why we equip our saw with a robust 18 kW (24.5 HP) main saw motor. Motorized, stepless cutting height control including grooving function A positioning drive allows the entire saw unit to be automatically raised or lowered to a set height, expanding production possibilities and ensuring precise grooves. Adjustment is made directly via the operator terminal. Motor: 18.0 kW (24.5 HP), 3x400 V / 50 Hz Optional equipment: - 14: Infinitely variable speed control, 2000–5000 rpm - 95: Pneumatic pressure device, 50–2100 mm - 24: Dust extraction pack on saw carriage for processing gypsum- and cement-bonded materials - 30: Air-cushion table, 2300 x 600 mm (2 units) - 28: Movable machine tables on linear guides and rollers - 40: Number of double-finger pack clamps, opening height 105 mm - 41: Additional double-finger pack clamp, opening height 105 mm - 38: Automatic trimming via laser measurement - 45: Additional double roller conveyor for sagging workpieces - 44: 24" touchscreen control unit - 90: Network connection preparation - 86: Control cabinet in special position - 700: Ardis module 1 - 710: Ardis module 2 - 714: Post-processor - 720: Ardis module 3 - 400: Helical rack for smoother operation - 401A: Saw carriage feed 0.2 m/min–60 m/min, return 80 m/min - 403: Cut length selection via switch - 404: Double pressure beam SL 3200 - 437: Technology database including controlled pressure regulation for pressure beam and pack clamps - 92: Transport preparation for crane unloading Including delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Condition: used, Year of construction: 1985, with großer cut length 3500 mmused, good conditionmanufactured by Mayertype FSKbuilt in 1985 or 2,2 kWcut length 3500 mmsaw blade diameter ca. 180 mmpneumatic clampingrip fence with hand wheel adjustablefront extented tablerear extented tableveneer strip fence with stop fingerexhaust ductpneumatic service unitexhaust connection D 100 mmrequired space ca. l x w x h mm4400 x 1200 x 1300weight ca. 600 kgtotal connected power ca. 2,2 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Iodpfsvwf Uvjx Adnea

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, Mayer panel dividing saws impress with the usual well thought-out machine concept and numerous detailed solutions that get to the heart of every requirement. Each machine type stands for absolute top performance in its own right. However, the more varied the requirements of the materials to be cut, the more it is the small details that determine the success of the entire process. With heavy and solid saws, Mayer relies on durable quality and high-quality mechanical engineering. The overall concept is also impressive: the heavy-duty design with steel pressure beam and material pusher, simple operation in one-man operation and maximum process reliability with the modular cutting optimization program and the new software packages guarantee maximum performance and precision in efficient panel cutting. The modular cutting optimization program with barcode labelling stands for maximum process reliability. The saw carriage with main and scoring saw unit is guided on a hardened and ground round shaft guide system. The extremely smooth running of the saw carriage at cutting speeds of 5 to 100 meters per minute is ensured by the high-precision drive via a gear wheel and rack and pinion system. The high-end cutting edges are achieved by the automatic cutting height adjustment for the optimum saw blade entry angle and extremely smooth running of the saw carriage. The double measuring system guarantees the highest possible repeat accuracy. The pressure beam opens depending on the material height, which reduces material travel times to a minimum. The "Greenline package" with controlled suction slides and direct control of the motors can reduce energy consumption by up to 30%. Additional equipment 30 Air cushion table 2300 x 600 mm 42 Package clamp, single-finger design 41 Additional package clamp, position 493 mm 61 Thermal label printer 90 Preparation for network connection 700 Ardis module 1 710 Ardis module 2 714 Postprocessor 720 Ardis module 3 723 Label printing 725 Barcodes for labels 727 Edge calculation 740 Ardis module 4 747 Network license manager 748 Additional network workstation Iedpsu Egygefx Adnea Further technical data: Motor power: 12 hp (9 kW) Suction connection: 120 / 100 mm Feed speed: 5-100 m/min Saw blade projection: 77 mm Saw carriage and material pusher can perform cuts up to 3200 millimetres long Return speed: 130 m/min Angled table: 2300x600 mm 2x material table: 1800x600 mm

Condition: used, Year of construction: 1985, from schoolused, great condition, little usedMake MayerType FSKYear of construction 1985Machine no. 7936GS testedEngine 1.8kWCutting length 3000 mmSaw blade diameter approx. 180 mmpneumatic tensionrear support tableWeight about 800 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Iodpfx Aovwf Agsdnoa

Condition: good (used), Year of construction: 2001, Veneer saw with planing unit cutting length 3500 mm with rear depth stop, adjustable by hand wheel Isdpfx Asivg Dzjdnja no electr. feed

Condition: used, Year of construction: 1996, functionality: unexamined, machine/vehicle number: 43246, working width: 300 mm, Possible Technical Specifications (based on comparable models) Type: Single jersey circular knitting machine with up to four needle tracks. Cylinder diameter: 26" to 48". Gauge (fineness): E14 to E60. Number of feeders: 3.2 per inch (e.g., 96 feeders with a 30" diameter). Speed: Up to 25 revolutions per minute at a 30" diameter. Speed factor (SF): 990. Ijdpjwt Rfdsfx Adnja Structures: Single jersey, piqué, double piqué, two-thread fleece, and single jersey with plating. Applications: Underwear, nightwear, outerwear, sports and leisurewear, swimwear, automotive, and mattresses. Supplied complete with accessories. Including enclosure Additional information: Length (machine): 3000 mm Width (machine): 3000 mm Height (machine): 2800 mm These values represent the external dimensions of the machine itself. Capacity (cylinder diameter): 813 mm Number of needles: 2808 pcs Needle Ø: 0.91 mm Number of yarn spool holders: 100 pcs

Condition: good (used), Year of construction: 1979, Veneer saw FSK Year of manufacture 1979 Pneumatic Isdpfom Dr Urox Adnja 1,8 kw, 380 Volt cutting length 3000 mm cutting height 40 mm Saw blade 180 mm Depth to fence 500 mm space requirement 4000, 1200, 1300 mm weight approx. 500 kg

Condition: good (used), Year of construction: 1980, functionality: fully functional, STC-Ref:G-791-0121 Karl Mayer-Web-Wirk machines ,Year: 1980 format width: 12 Zoll, 4,06 mtr equipped: Iedpot Rhyksfx Adnja - für Schattennetze - material width max. 160 Zoll, 4,06 mtrs. - type: R 4 n1 M-FSM - grammature 70 g/qm - 180 g/qm - many spare parts included - GANG753 --> available: 11/2024

Condition: repair required (used), Year of construction: 2002, functionality: limited functionality, cutting height (max.): 150 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, input frequency: 50 Hz, overall weight: 7,800 kg, input voltage: 400 V, sheet thickness aluminum (max.): 150 mm, Equipment: CE marking, Used Mayer AL150 (advanced line) saw for aluminium up to 150mm thick. Technically and visually in excellent condition, with normal signs of use, but for its age and operational hours it is very tidy. Saw length: 3,200 mm Saw depth: 3,200 mm Control unit OK Saw motor OK incl. frequency inverter Drive/positioning of rip fence OK Ijdpoxmbhyjfx Adnoa Saw carriage feed motor/cabling NOT OK!! Machine is dismantled and stored at our warehouse in Barneveld. Immediately available including modern PC (Dell XE2) with Windows 7 (see photos)

Condition: excellent (used), functionality: fully functional, Complete factory for sale, currently in operation, including fabric samples of ongoing production. Full customer portfolio and comprehensive technical documentation included. Machine List: KARL MAYER RASCHEL RJSC-4F-NE 230/584/18, with creel 844xx, 2 units, year 1997 KARL MAYER RASCHEL RJSC-4F-NE 230/584/18, with creel 831xx, 2 units, year 1996 KARL MAYER RASCHEL 5/2 F-NE, two Jacquard bars, 130/330/14/14, with two creels 626xx, 2 units, year 1984 KARL MAYER RASCHEL 5/2 F-NE, two Jacquard bars, 130/330/7/14/7, with two creels 626xx, 1 unit, year 1984 KARL MAYER RASCHEL RG4N-1K, 130/330/20, 555xx, 1 unit KARL MAYER RASCHEL RMJG 5-F, 130/330/7/14, with creel 543xx, 1 unit, year 1979 KARL MAYER RASCHEL RJG 5F-NE, 130/330/7/14, with creel 582xx, 2 units, year 1988 KARL MAYER RASCHEL RJMSG 4F-NE, 130/330/14, with creel 762xx, 5 units, year 1991 KARL MAYER RASCHEL RJMSG 5F-NE, 130/330/14, with creel 744xx, 2 units, year 1990 KARL MAYER RASCHEL RJMSG 5/2 F-NE, two Jacquard bars, 130/330/14/14, with two creels 744xx, 5 units, year 1990 KARL MAYER RASCHEL HDRJ 5/2 PLM, two Jacquard bars, 130/330/16/16, with two creels 677xx, 3 units KARL MAYER RASCHEL RJMSG 4F-NE, 130/330/14, with creel 763xx, 1 unit, year 1991 KARL MAYER RASCHEL RJG 5/2 F-NE, two Jacquard bars, 130/330/14/14, with two creels 654xx, 4 units, year 1984 KARL MAYER RASCHEL RJG 5/2 F-NE, two Jacquard bars, 130/330/14/14, with two creels 683xx, 2 units, year 1986 KARL MAYER KS3, 130/330/28, 553xx, 1 unit KARL MAYER KS2, 130/330/28, 531xx, 1 unit KARL MAYER SECTIONAL WARPER G8, 14, 221x, 1 unit KARL MAYER SECTIONAL WARPER DS21, 14x21, 287x, 1 unit Iedpfx Adsxlt Rqsnoa SCHWEITER BOBBIN WINDER, 48 heads, MC 82x, 1 unit M-TEC 4-ply fabric folding machine, 330, 740x, 1 unit, year 1997 For further details or to arrange an inspection, please contact us.

Condition: good (used), Year of construction: 1987, max. cutting length: 4200 mm Iodpfjxtwylox Adnea with rear support featuring a movable stop with front support Required space: 6.7 x 1.2 m

Condition: used, Year of construction: 1998, functionality: unexamined, machine/vehicle number: 46493, Possible technical specifications (based on comparable models) Type: Single jersey circular knitting machine with up to four needle tracks. Cylinder diameter: 26″ to 48″. Ijdpfowt Rwmox Adnja Gauge: E14 to E60. Number of feeders: 3.2 per inch (e.g. 96 feeders at a diameter of 30″). Speed: Up to 25 revolutions per minute at a diameter of 30″. Speed factor (SF): 990. Structures: Single jersey, piqué, double piqué, two-thread fleece, and single jersey with plating. Applications: Underwear, nightwear, outerwear, sports and leisurewear, swimwear, automotive industry, and mattresses. Complete with accessories. Including rim/guard.

Condition: used, Year of construction: 1980, functionality: fully functional, cutting length (max.): 3,500 mm, type of input current: three-phase, saw blade diameter: 200 mm, total width: 1,200 mm, total length: 4,400 mm, total height: 1,300 mm, overall weight: 600 kg, power: 2.2 kW (2.99 HP), Dietz motor 2.2 kW Pneumatic pressure bar Rear support table provided if required Extraction connection DM 100mm Located in Karlsruhe Rheinstetten Isdpfx Aexbbiyodnsa Forklift available

Condition: used, functionality: fully functional, cutting length (max.): 3,500 mm, cutting height (max.): 40 mm, type of input current: three-phase, saw blade diameter: 180 mm, – very good condition TECHNICAL SPECIFICATIONS: – cutting length: 3500 mm – cutting height: 40 mm – cutting width on the right side: 960 mm – saw motor: 3 kW – milling cutter motor: 1.5 kW – feed motor: 0.75 kW – stepless cutting speed adjustment – blade diameter: 180 mm – cutter diameter: 70 mm Iodpfx Adjw I Efgsnsa – extraction port diameter: 100 mm – upper pressure beam – automatic milling cutter approach – possibility of manual or automatic cutting – overall dimensions (L/W/H): 530 / 205 / 130 cm – weight: ~ 800 kg

Condition: good (used), Year of construction: 1981, functionality: fully functional, cutting height (max.): 3,000 mm, table length: 3,000 mm, - pneumatic clamping beam - cutting length 3000 mm - front support table Iedpfx Aow Hlxlednea - rear support table with stop - 2.2 kW motor

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor Isdpfx Asb A Rzvodnoa -Power: 1.3 kW 2800 rpm at 50 Hz -Voltage: 380 volts -Mounting shaft: Ø 24 mm -Tool: Ø 118 mm -Dimensions: 380/200/H240 mm -Weight: 25 kg

Condition: good (used), Year of construction: 1987, Veneer saw with planer unit, connectable with reversible knife planer head. Max. cutting length 3005 mm. With rear finger stop and scale. Ijdpsw U D U Hefx Adnja

Condition: used, functionality: unexamined, machine/vehicle number: 35484, working width: 3,000 mm, Possible technical specifications (based on comparable models) Type: Single jersey circular knitting machine with four needle tracks. Cylinder diameter: 26″ to 48″. Gauge: E14 to E60. Number of feeders: 3.2 per inch (for example, 96 feeders with a 30″ diameter). Speed: Up to 25 rotations per minute at a 30″ diameter. Speed factor (SF): 990. Structures: Single jersey, piqué, double piqué, two-thread fleece, and single jersey with plating. Isdowt Ricjpfx Adnsa Applications: Underwear, nightwear, outerwear, sports and leisurewear, swimwear, automotive, and mattresses. Complete with accessories. Including enclosure. Additional information: Length (machine): 3000 mm Width (machine): 3000 mm Height (machine): 3000 mm These values represent the external dimensions of the machine itself. Capacity (cylinder diameter): 813 mm Number of needles: 2808 units Needle Ø: 0.91 mm Number of yarn bobbin holders: 102 units

Condition: good (used), Year of construction: 2000, Motorized roller table MAYER Type:RGM 770-4250 Year 2000 Ijdpfx Aou Euccodnja Roller diameter : 70 mm Roller conveyor width : 770 mm Roller height from floor : 760 mm Total length : 4250 mm Good condition .

Condition: used, functionality: unexamined, machine/vehicle number: 41254, General technical specifications of the INOVIT 2.0 II Cylinder diameter: 30 inches (76 cm) Needle gauge: E10 to E28 Number of feeding systems: 62 with a 30-inch cylinder Maximum speed: Up to 35 revolutions per minute at 30 inches Speed factor (SF): 1050 Cam tracks: 4 tracks – 2 in the dial and 2 in the cylinder Ijdpfxswt Rxdo Adnoa Production capabilities: Interlock, 8-lock, piqué, rib fabrics and other double jersey structures Additional features: Option for Lycra integration and rapid switching between different fabric structures. Remarks on machine number 41254 Although there is no specific data available for machine number 41254, the above specifications can serve as a guideline for this machine's capabilities. Complete with accessories. Additional information. Length (machine): 3000 mm Width (machine): 3000 mm Height (machine): 2800 mm These values indicate the external dimensions of the machine. Capacity (cylinder diameter): 762 mm Number of needles: 1680 units Needle diameter: 1.41 mm Number of yarn spool holders: 62 units

Condition: used, functionality: unexamined, machine/vehicle number: 33509, working width: 300 mm, Complete with accessories Possible technical specifications (based on comparable models) • Type: Single jersey circular knitting machine • Diameter: 15″ to 36″ • Gauge: E20 to E28 • Number of feeders: 120 at 30″ • Speed: Up to 50 revolutions per minute at 30″ • Speed factor (SF): 1500 • Structures: Suitable among others for two-thread fleece and piqué • Applications: Sports and leisurewear, underwear, nightwear and outerwear • Special features: • 50% less friction thanks to ‘relative technology’ • Lower energy consumption • Mayer Cleaning System (MCS) for reduced oil consumption and longer needle life • Automated knit-on aid for efficient restart after yarn breakage Additional information: Iedpfx Aswt Rahodnsa Length (machine): 2 400 mm Width (machine): 2 400 mm Height (machine): 2 550 mm These values indicate the external dimensions of the machine. Capacity (cylinder diameter): 660 mm Number of needles: 1,944 units Needle diameter: 1.06 mm Number of yarn cone holders: 83 units