Used Wood Heating for sale (30,116)

Condition: good (used), Year of construction: 2018, functionality: fully functional, Wood chip heating system with moving grate combustion, with flue gas dedusting, with Glosfume fine dust filter system. Boiler size: 257 cm long, 151 cm wide, 293 cm high. Weight: 7 tons. Dismantling must be performed by the buyer. Cedpfx Aboxciide Tjrk

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Codpfxoxwhw Aj Ab Terk Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: used, For Sale: KWB Multifire 20–80 kW Biomass Boiler – Flexible Heating with Wood Chips and Pellets The KWB Multifire 20–80 kW is a fully automatic biomass boiler, ideal for apartment buildings, commercial facilities, or agricultural operations. It can be operated with both wood chips and pellets, offering maximum fuel flexibility, reliable performance, and high efficiency. — Key features: • Fuel: Wood chips / Pellets • Output: 20–80 kW • Fully automatic combustion, feeding, and cleaning • Robust design for continuous operation • KWB – Austrian innovation in biomass heating PRICE: 4,900 EUR Csdpfx Abettqd No Tsrk Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — Top Heating Systems – ProfiKazán Flexible biomass heating systems for residential and commercial buildings.

Condition: not inspected (used), Year of construction: 1993, operating hours: 23,456 h, functionality: unexamined, machine/vehicle number: 22734, overall weight: 1,500 kg, power: 160 kW (217.54 HP), heating capacity: 160 kW (217.54 HP), space requirement length: 2,000 mm, space requirement height: 2,200 mm, space requirement width: 1,100 mm, temperature: 95 °C, Mawera FU160 TRA boiler body for sale as spare part. Untested, dismantled, ready for loading immediately. Crjdpjvvmvfofx Ab Tek

Year of construction: 2023, condition: new, WLO 4 35 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 30.00 kW maximum heat output: 35.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 3500 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 290 kg Gross weight: 310 kg Furnace lining: 28 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 950mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 580mm x Height: 560mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Crodjixupuepfx Ab Tok Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 400mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 3500 m3 / h Safety: CE mark + protective net

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity already disassembled Crjdpfx Asv Ngq Asb Tek complete with boiler, stocker unit, and discharge system

Condition: used, For sale: MAWERA 470 kW Biomass Boiler – Robust Industrial Wood Chip Heating System The MAWERA biomass boiler with a rated thermal output of 470 kW is ideal for industrial and agricultural heating systems with a consistently high heat demand. Austrian quality, durable construction, and efficient heat transfer are the hallmarks of this boiler. — Technical Data: • Fuel: Wood chips, sawdust, wood shavings • Rated thermal output: 470 kW • Combustion system:   ◦ Feed auger for fuel supply   ◦ Combustion chamber with heat-resistant fireclay lining • Control & Air Supply:   ◦ Primary and secondary air controlled via motorized dampers and blowers   ◦ Temperature-controlled regulation with flue gas and combustion chamber sensors • Boiler construction:   ◦ Water-cooled boiler with generously sized heat exchanger surfaces   ◦ Front and rear fire doors for easy access and maintenance Crjdpemuzq Ejfx Ab Tok — Price: 6,500 EUR net Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán)

Year of construction: 2023, condition: new, WLO 45 KW Hot air stove ,wood stove,Heating Thanks to the powerful combustion chamber, the stove can burn up to Pick up 120 cm long pieces of wood! Furnace parameters Credpjixuq Dofx Ab Tsk Nominal heating output: 49,5 kW approx. 450 m2 including: axial fan with speed: 1380 rpm and output: 5500 m3/h Included in delivery: Controller to regulate the operation of the SCL-1515 fan innovative design of the air jacket that completely surrounds the cooker for maximum efficiency Indestructible range cooker made entirely of certified boiler plate p265gh and 16M06, thickness #6mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 320 kg Gross weight: 340 kg Grid: 1000 x 250 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look solid construction huge combustion chamber 120 x 80cm! large loading door User Guide Yield: 75.00% CO emission at 13% O2: 1.20 m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20%* mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / affixed to the rating plate Compliance with standard: EN13240:2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 800mm x Overall Depth: 1600mm x Overall Height: 1200mm Cooker dimensions: Width: 800mm x Length: 1200mm x Height: 800mm Upper door dimensions (3 & 4mm sheet metal): Width: 520mm x Height: 470mm Bottom door dimensions (3 & 4mm sheet metal): Width: 360mm x Height: 150mm Top Loading Port Dimensions: Width: 460mm x Height: 460mm Bottom opening dimensions: Width: 360mm x Height: 130mm Grate Dimensions: Width: 250mm x Depth: 1000mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 200mm Foot height: 140 mm

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system 60 kW heating capacity Crsdpfx Absw Rpdrj Tek year of manufacture 2014 without discharge unit (can be provided if needed)

Condition: used, For sale: KWB TDS Powerfire 45–150 kW Biomass Boiler – Versatile Wood Chip and Pellet Heating System The KWB Powerfire TDS 45–150 kW is a flexible and powerful biomass boiler – ideal for apartment buildings, commercial properties, or agricultural applications. Suitable for wood chips and pellets, it impresses with fully automatic operation and high efficiency across the entire output range. --- Key Features: Fuel: Wood chips / Pellets Power: 45–150 kW Fully automatic system with modulating output adjustment Industrial-grade, low-maintenance construction KWB – Austrian quality for commercial biomass heating PRICE: 7,900 EUR Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) Csdshikbuopfx Ab Tork --- Top Heating Systems – ProfiKazán Smart biomass heating solutions from leading Austrian manufacturers.

Year of construction: 2023, condition: new, Selling a WLO 25 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 25.00 kW maximum heat output: 30.00 kW / approx. 300 m2 in set: forcing axial fan speed: 1400 rpm and capacity: 3110 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 230 kg Gross weight: 240 kg Furnace lining: 15 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Codpfx Absixupmj Tjrk Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 900mm x Overall Height: 1310mm Oven dimensions: Width: 390mm x Depth: 460mm x Height: 540mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 350mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.58A Speed: 1400 rpm Air flow: 3110 m3 / h Safety: CE mark + protective net

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler – ideal for residential properties, small commercial buildings, or agricultural applications. It is suitable for operation with wood chips and pellets, offers modular output and fully automatic operation, all within a space-saving design. ⸻ Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, fuel feeding, and cleaning 🔧 Compact design – ideal for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 💥💰 PRICE: 3,900 EUR 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) Cedpfowahhvox Ab Terk ⸻ 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility.

Year of construction: 2024, condition: new, Sell ​​a new WLO -15 KW, Hot air stove ,wood stove,Heating Csdpfx Absixul He Tjrk Technical parameters of the furnace Nominal heating output: 12.00 kW maximum heat output: 15.00 kW / approx. 150 m2 in set: forcing axial fan speed: 1400 rpm and capacity: 1460 m3/h Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 80 kg Gross weight: 100 kg replaceable large cast iron grate covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 250mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.30A Speed: 1400 rpm Air flow: 1460 m3 / h Safety: CE mark + protective net

Condition: good (used), For sale: Fröling Turbomatic TMC 35 kW – Automatic Biomass Boiler for Wood Chips, Pellets, and Firewood The Fröling Turbomatic TMC 35 kW is a compact, fully automatic biomass boiler – ideal for agricultural operations or small commercial facilities. — Technical specifications: • Output range: 10.5 – 35 kW • Efficiency: very high, thanks to automatic combustion control • Fuels: wood chips, sawdust, pellets (optionally also firewood up to 35 cm with special grate) • Boiler water content: 114 liters • Weight: approx. 600 kg • Power supply: 400 V / 50 Hz, fuse protection 20 A • Operating temperature: up to 95 °C Crjdpfjw Naqgsx Ab Tek • Minimum return temperature: 55 °C • Operating pressure: up to 3 bar • Control system: Lambdatronic with oxygen sensor for optimal combustion — ⚙️ Additional features: • Multi-pass heat exchanger with automatic turbulators • Large-volume, refractory combustion chamber with insulation • Independent drives for optimal adjustment to fuel type and moisture content • Emergency operation possible with firewood — Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) Price: EUR 5,900 net

Year of construction: 2024, condition: new, Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 44.50 kW maximum heat output: 50.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 5060 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 330 kg Gross weight: 340 kg Furnace lining: 40 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Credoixup Aopfx Ab Tsk Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 1290mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 930mm x Height: 680mm Upper door dimensions (sheet 3 and 4mm): Width: 390mm x Height: 330mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 315mm x Height: 310mm Center & Bottom Loading Port Dimensions: Width: 315mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 450mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 5060 m3 / h Safety: CE mark + protective net

Year of construction: 2024, condition: new, Selling a WLO 20 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 20.00 kW maximum heating output: 23.00 kW / approx. 230 m2 in set: force axial fan speed: 1380 rpm and capacity: 2910 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible fireplace made of 5mm thick boiler plate large exhaust deflector reduces fuel consumption by up to 30% Credpfeixun Tjx Ab Tjk Energy efficiency class: A Energy efficiency index: 110 Net weight: 160 kg Gross weight: 180 kg Furnace lining: 12 firebricks replaceable large cast iron grate covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 790mm x Overall Height: 1030mm Oven dimensions: Width: 380mm x Depth: 450mm x Height: 500mm Upper door dimensions (sheet 3 and 4 mm): width: 365 mm x height: 215 mm Bottom door dimensions (3 & 4mm sheet metal): Width: 365mm x Height: 295mm Top Loading Port Dimensions: Width: 285mm x Height: 195mm Lower Loading Port Dimensions: Width: 285mm x Height: 265mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 120mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 300mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.30A Speed: 1380 rpm Air flow: 2910 m3 / h Safety: CE mark + protective net

Condition: used, Year of construction: 2021, functionality: fully functional, - Year of manufacture: 2021 - Electrical diagram - Electric motor: 11 kW - Log cutting length: up to 6.5 meters Crjdpsx A Tqxjfx Ab Tok - Control: stationary control panel - Additional equipment: - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark before cutting) - Dual-function hold-down - Side supports - Leveling rollers. Machine dimensions: - Length: 750 cm - Width: 220 cm - Height: 240 cm - Weight approx. 1700 kg

Condition: excellent (used), TECHNICAL DATA - track width 300mm - shaft width 330mm - max saw blade diameter 300mm - blade bore diameter 70mm - max cutting height 90mm - table width with extension 720mm - table length 1800mm * from above: - 2 rows of pawls - smooth metal sliding roller - planing shaft 320mm, 4-knife shaft 7.5kW - head with pneumatic brake - hold-down system Crjdswxd Ipjpfx Ab Tjk - shaft with saw blades - smooth metal sliding roller * from below: - pawls - track - pneumatically adjustable pressure and sliding rollers - central lubrication - feed motor 0.75kW - main motor 30kW - overall dimensions (LxW xH) 1870x1370x1600mm - weight approx. 2500kg ADVANTAGES – planing shaft 320mm with 4-knife head – central track lubrication – solid construction – used multi-blade saw in very good condition Net price: 29,900 PLN Net price: 7,120 EUR depending on exchange rate 4.2 EUR (Prices may change with larger fluctuations)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Mebor HTZ 1200 profesional Cedoxk Innepfx Ab Tork Motor 37 kw 13m railway 10m logs length sawn Logs arm loading Ready for work

Condition: like new (used), Year of construction: 2022, E450PM - AUTOMATIC EDGE BANDING MACHINE V000047 LME450PM-5 with joint trimming unit Machine in excellent condition VOLTAGE 400/50/3 CONTROL WITH 7" TOUCH SCREEN EXCHANGEABLE GLUING UNIT VR - MULTIFUNCTION TRIMMING UNIT Tool for straight/radius trimming TOOL KIT R=2 mm FLAT SCRAPER RELEASE AGENT UNIT LED INTERNAL LIGHTING DOCUMENTATION IN GERMAN INFRARED LAMP for panel pre-heating Crjdpfxexac Hws Ab Tek SCRAPER UNIT Location: ex stock 54634 Bitburg - immediately available -

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 750 kg, maximum load weight: 700 kg, Equipment: lighting, Suchen Sie nach einem gemütlichen Wochenendhaus, einem Büro im Garten oder einem zusätzlichen Raum für Ihre Familie? Unser einzigartiges Modell bietet die perfekte Lösung. Mit einem vierseitigen Dach und einer gehängten Metallfassade, die eine Lebensdauer von 30+ Jahren hat, bietet unser mobiles Haus höchste Qualität. Die hochwertige Aluminiumfenster sorgen für eine hervorragende Ästhetik und Funktionalität. Csdpopxnpaefx Ab Tsrk Im Inneren erwartet Sie ein selbstnivellierender Holzboden, der mit Harz beschichtet ist, sowie ein Badezimmer mit Harz behandelten Holzplatten. Die Wände und Decken bestehen aus robusten Sperrholzplatten. Unser mobiles Haus verfügt über hochwertige Innentüren und modulares Beleuchtungssystem. Die Küche ist mit eingebauten Schränken und Geräten ausgestattet, während das Schlafzimmer über eingebaute Kleiderschränke verfügt. Das mobile Haus bietet hochwertige Schlüssel und Steckdosen sowie eine ausgezeichnete Boden- und Dachdämmung. Die Bodenisolierung ist aus Mineralwolle und beträgt 15 cm, die Dachisolierung 18 cm und die Außenwandisolierung 15 cm. Das Haus ist bereits für die Installation von Außenkameras, Klimaanlagen und Lüftungsanlagen vorbereitet. Es gibt Anschlüsse für eine Waschmaschine und Platz für einen Kühlschrank, eine eingebaute Fritteuse, einen Herd und einen Dunstabzug. Zahlreiche Steckdosen sind in der Küche, im Wohnzimmer, im Schlafzimmer und im Badezimmer vorhanden. Unser mobiles Haus bietet auch die Möglichkeit zur Installation von Photovoltaiksystemen auf dem Dach, um nachhaltige Energie zu nutzen. Lieferbar in 7-14 Tage! Verpassen Sie nicht die Gelegenheit, Ihr Traumhaus zu finden! Kontaktieren Sie uns, um weitere Informationen zu erhalten und Ihre Bestellung aufzugeben.

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 Credjq Igyvepfx Ab Tek # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: like new (used), Year of construction: 2022, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: WM4000/004/2022, - Wood-Mizer WM4000 band saw - Dust extraction bracket - Operator console with touchscreen and joysticks - Heated operator cabin - Chip extraction system - Board outfeed mechanism with chip brushes - Outfeed cross conveyor Credpfx Aexrnwfob Tok Everything is connected and ready for testing. Band saw specifications: Power: 22 kW Electric Max. diameter: 100 cm Max. cutting width: 86 cm Max. cant width: 78.5 cm Height above cutting tool: 33 cm Max. clamping width: 66 cm Min. clamping width: 5 cm Setworks electronic ruler with touchscreen Head height adjustment: Electric Head feed forward/reverse: Electric Cutting width adjustment: Electric Blade lubrication system: Automatic Blade tensioning system: Pneumatic Sawdust extractor port diameter: 150 mm Laser sight Roller, double block blade guide Pantograph Board return supports Blade: Length: 5,000 mm Width: 38 mm Flywheel: Diameter: 635 mm Type: Belt-driven Material: Cast steel Frame design: Single rail Operator’s station

Year of construction: 2022, operating hours: 4,000 h, condition: like new (used), functionality: fully functional, Complete Wood Shavings Line Includes: Loghaver, Vecoplan screen, 3 conveyors, dryer, and furnace Fully operational wood shavings production line in excellent condition. The equipment can be sold as a complete set or individually by parts. Codjxq Rvuepfx Ab Terk For more information, technical details, or photos, please contact us.

Condition: as good as new (ex-display), Year of construction: 2023, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,360 mm, cutting height (max.): 90 mm, saw blade diameter: 300 mm, Equipment: saw blade guard, Sliding table saw / Panel saw Brand: Wood-Mizer Model: MS750 Year of manufacture: 2023 Technical data Sliding table length: 3200 mm Cedjxlg Dkepfx Ab Terk Blade diameter: 300 mm Maximum cutting height (300 mm blade): 90 mm Maximum blade diameter: 400 mm Scoring unit Maximum splitting width against fence: 1360 mm Automatic YD start Main motor: 6 kW Scoring unit motor: 0.75 kW