Band saw

Hema SR 600

Condition: new, functionality: fully functional, Year of construction: 2022, working width: 5,000 mm, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2,100 kg. Driven via a PTO shaft with 540 rpm. - Maximum horizontal reach: 5.00 m - Independent hydraulic system (46 l/min, 210 bar) - Drive shaft - Hydraulic collision protection - Hydraulic swing arm - Float position for swing arm - Float position for mowing rotor - Stabilization kit for three-point linkage - Bowden cable control Dkodpfoxlf Hwex Aiwjl Flail rotor 1000 - Central mounting - Direct drive - Working width: 1.00 m - Weight approx. 140 kg

Year of construction: 1984, condition: used, machine/vehicle number: 25 948, throat: 485 bzw. 1050 mm roller-Ø: 500 mm passage height: 380 mm table size: Arbeitstisch 780 x 800 mm sawing band length: ueber 2 Laufraeder 3920 - 4050 mm sawing band width max.: 20 mm band speed: 15 - 940 m/min engine: 380 V, 4 kW Dkjdjb N Eh Hspfx Aiwsl space needed: 950 x 2130 x 2100 mm weight: 1740 kg

Condition: new, width of the strips 300 mm band length 2070 mm band speed 7.0 m/sec surface of working table 750 x 380 mm Dkjdpfx Aoxaapieiwsl diameter 87.7 Führungsrollen mm engine output 1.5 kW total power requirement 400 Volt weight of the machine ca. 88.0 kg. range L-W-H 1050 x 600 x 400 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Crosscut and mitre saw Graule ZS 200 N Used, year of construction 1999 Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Dodeyh Nfujpfx Aiwskl Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2008, without briquetting press Filter area 32 m² Dksdpfx Aievxlqmewol with funnel transition to container or connection to rotary valve used, top condition, little used Brand Schuko Type Vacomat 300 Year of manufacture 2008 Clean air device / negative pressure GS dust-tested BIA-tested CE type-tested Motor 7.5 kW Connection diameter 300 mm Pressure pa. 3090 Air output 5800 m³/h Control Filter pressure monitor Extinguishing device powder extinguisher New price approx. 17,000.00 EUR Space requirement approx. 3600 x 1590 x 2550 mm / 4400 without funnel Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: good (used), Year of construction: 1969, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.785 mm -Cutting height: max.475 mm -Saw band: length 5600 mm -Work table: pivoting Dkjdpeh N Thwefx Aiwol -Drive motor with brake -Dimensions: 1600/1020/H2430 mm -Total weight: 794 kg

Condition: new, cutting diameter 170 mm dimensions of saw-band 2080 x 20 x 0,9 mm table height 880 mm cutting speed 40 + 80 m/min 170 mm 125 mm Dksdog Trvrspfx Aiwel 150 x 190 mm 95 x 120 mm total power requirement 1,1 kW weight of the machine ca. 0,24 t Dimensions (LxWxH) 870 x 1.550 x 1.740 mm mm This metal band saw comes with a closed worm gear. It also has hydraulic pressure control and a base frame that can be rotated through 45 degrees. Other features include emergency stop, the complete cooling system, the factory base frame, automatic switch-off and the quick-release device.

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Dodpfeul Svlox Aiwekl Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: used, Year of construction: 2014, functionality: fully functional, Make and Model: iDEAL BAS 340 Year of manufacture: 2014 Wood saw bands: From 25 × 0.6 mm to 120 × 1.2 mm Bimetal / tungsten-carbide saw bands: From 25 × 0.6 to 105 × 1.65 mm Stainless steel saw bands: From 25 × 0.5 mm to 50 × 0.8 mm Band knives: From 30 × 0.4 to 120 × 1.1 mm Mild steel strip: up to 250 mm² Stainless steel strip: up to 150 mm² Clamping system: hydraulic Nominal power: 45.0 kVA (50% duty cycle) Dimensions (L × D × H): 1214 × 957 × 1982 mm Weight: 800 kg Control system: Central parameter control 99 program memory slots Servomotor-controlled jaw positioning 7-inch color touchscreen USB interface with Password protection Adjustable welding voltage Electronic piece counter Dksdpfx Aisyr Idajwel Parameter deviation monitoring with automatic stop Hydraulic weld de-burring tool automatic system after welding Graphical annealing process display Infrared pyrometer with LED illumination and protection

Condition: new, width of the strips 45.0 mm band length 850 mm band speed 8.0 m/sek. voltage 230 V total power requirement 0.18 kW MADE IN GERMANY Furnishing : Dkedpexaanrefx Aiwjl - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German