Condition: used, Year of construction: 2006, power: 25 kW (33.99 HP), cutting height (max.): 110 mm, cutting width (max.): 4,300 mm, cutting length (max.): 4,300 mm, TECHNICAL DETAILS Max. panel width: 4,300 mm Max. panel length: 4,300 mm Min. cutting height: 3 mm Max. cutting height: 110 mm Max. saw blade overhang: 125 mm Feed and Grippers Number of grippers: 9 Number of grippers on the sliding stop: 9 Max. feed rate: 80 m/min Max. feed rate of the saw carriage: 120 m/min Saw Carriage Max. tool diameter: 450 mm Motor power: 18 kW Speed: 2,870 rpm Scoring Unit Design: Postforming scoring unit Max. tool diameter: 340 mm Motor power: 2.2 kW Speed: 2,880 rpm MACHINE DETAILS Control system: Windows XP Machine programming software: CADMATIC 3 Total connected power: 25 kW EQUIPMENT CE marking 4 front support tables 9 grippers on the sliding stop Postforming scoring unit Gslhcdezmtn Sow Djbr The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8206

Condition: used, Year of construction: 2008, power: 36 kW (48.95 HP), cutting height (max.): 105 mm, cutting width (max.): 4,400 mm, cutting length (max.): 2,200 mm, Equipment: scorer, TECHNICAL DETAILS Max. panel width: 4,400 mm Max. panel length: 2,200 mm Max. cutting height: 105 mm Thin panel feed: Yes Post-forming process: Yes Gripper system Number of grippers: 10 Flexible, NC-positionable grippers: Yes Grippers on the sliding stop: Yes Sawing unit Main saw blade overhang: 120 mm Max. saw blade overhang: 120 mm Max. tool diameter, main saw: 450 mm Scoring unit: Yes Post-forming scoring unit: Yes Max. tool diameter, scoring saw: 300 mm Max. feed rate: 130 m/min MACHINE DETAILS Control system: Windows Machine programming software: OSI Total connected load: 36 kW EQUIPMENT CE marking Tilting table with 4 tables Saw carriage 1 Barcode label printer Zebra S4M Gslhszmtnxjcdw Dobr The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8409

Condition: used, Year of construction: 2010, power: 30 kW (40.79 HP), cutting width (max.): 3,800 mm, controller model: POWERCONTROL, cutting length (max.): 2,200 mm, Equipment: scorer, TECHNICAL DETAILS Max. panel width: 3,800 mm Max. panel length: 2,200 mm Min. cutting height: 6 mm Max. saw blade overhang: 130 mm Number of tables: 3 Number of grippers: 7 Gripper arrangement: On the sliding stop Max. feed rate: 90 m/min Sawing unit Number of saw carriages: 1 Positioning: NC-controlled Max. tool diameter: 480 mm Motor power: 18 kW Scoring unit Positioning: NC-controlled Max. tool diameter: 200 mm Motor power: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Machine programming software: CADMATIC 4 Total connected load: 30 kW EQUIPMENT CE marking Barcode label printer Gbelezmtnlehcdw Der The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7875

Condition: used, Year of construction: 2004, saw blade diameter: 180 mm, tool diameter: 450 mm, Equipment: scorer, TECHNICAL DETAILS Sawing carriage Max. saw blade overhang: 125 mm Number of grippers: 11 Max. feed rate: 80 m/min Max. tool diameter: 450 mm Motor power: 21 kW Gjlhcjzmtm Ujdw Dobr Scoring saw Max. saw blade diameter: 180 mm Motor power: 2.2 kW Max. feed rate: 150 m/min EQUIPMENT Lifting table Scoring unit Barcode label printer The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6645

Condition: ready for operation (used), Year of construction: 2001, operating hours: 22,539 h, This HOLZMA HCL 11/56/22 was manufactured in 2001. It features a maximum panel size of 5600 × 2200 mm and a cutting length of 5600 mm for longitudinal sawing. The saw blade projects up to 125 mm, and it includes a turning station sized 1250 × 1250 mm. With a lifting capacity of 10 tons and a maximum lifting height of 1430 mm, consider the opportunity to buy this HOLZMA HCL 11/56/22 panel saw. Contact us for more information. • Total connected load: 88 kW • Voltage: 400 V / 50 Hz / 3~ + N • Current: 159–160 A • Control voltage: 24 V • Cutting capacities: • Maximum panel size: 5600 × 2200 mm • Minimum panel size: 2440 × 1220 mm • Cutting length (longitudinal saw): 5600 mm • Cross saw: 2200 mm • Saw blade projection: 125 mm • Pneumatic and extraction requirements: • Required air pressure: 6 bar • Air consumption: 250–300 l/min • Dust extraction volume: 10,000 m³/h • Air speed: 26 m/s • Installation / floor requirements: • Concrete quality: B25 • Minimum concrete thickness: 200 mm • Floor level tolerance: ±10 mm • Working height: approx. 485–520 mm • Extraction connections: Ø 320 mm (main) + Ø 150 mm + Ø 80 mm • Operating hours (from counters): • Counter 1: 23,610.8 h • Counter 2: 22,539.7 h Gbolhcdjzt S Uqow Djr Additional equipment • Lift table: • Maximum panel size: 5600 × 2200 mm • Stack height without pit: 550 mm • Stack height with pit: 1430 mm • Maximum lifting height: 1430 mm • Lifting capacity: 10 t • Turning station: • Dimensions: 1250 × 1250 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,484 h, overall weight: 2,580 kg, controller manufacturer: SIEMENS, controller model: S7-300, Circular Metal Saw manufactured in 2017. This STEIN BAK10-D features an electrical height adjustment system and individually adjustable caterpillars and saws. It has a maximum saw blade diameter of 400 mm and a regulated saw blade nominal speed ranging from 500 to 4200 rpm. If you are looking to get high-quality cutting capabilities, consider the STEIN BAK10-D machine we have for sale. Contact us for further details. Gslhcdwezt Sa He Dsbr - Machine Type: Double Caterpillar Saw Combination- Operating Voltage: 400 V- Connection Power: 22 kW- Nominal Current: 55 A- Frequency: 50 Hz- Operating Hours: 3484 h- PLC / Control Unit: Siemens S7-300 / Dual Siemens SIMATIC HMI Touch panels- Height Adjustment: Electrical height adjustment of the entire system- Caterpillars & Saws Adjustment: Both caterpillars and saws individually adjustableCaterpillar (Haul-off) Specs:- Total Pull-Off Force: 10 kN- Pull-Off Speed: 0.1 to 10 m/min- Belt Contact Length: 1000 mm- Upper Edge Lower Cleat Min. / Adjustment Travel: 1000/150 mm- Belt Width: 100 mm- Maximum Temperature: 120°C- Upper Part Stroke: 200 mm- Center Distance: 220 mmSaw Specs:- Regulated Saw Blade Nominal Speed: 500 - 4200 rpm- Motor Power: 3 kW- Motor Voltage: 230/400 V- Max. Saw Blade Diameter: 400 mm- Max. Material Speed: 10 m/min- Saw Repeat Accuracy: +/-0.5 mm/m- Longitudinal Stroke (Extruder Direction): 900 mm- Average Working Height: 1100 mm- Adjustment Option: +/-50 mm

Condition: used, Year of construction: 2014, Reinhardt Slimline SL 110 automatic, optimizing cross-cut saw Description: Machine type Year of manufacture 2014 Serial number 148319-060 Maximum cutting height 110 mm Maximum cutting width Approx. 350 mm at 50 mm thickness Saw blade diameter 500 mm Saw blade bore 30 mm Saw blade thickness Approx. 5 mm Saw blade speed 3,600 rpm Saw motor power 5.5 kW Feed motor power 1.8 kW Feed speed 0–90 m/min Return speed Up to approx. 130 m/min Positioning accuracy ±0.5 mm Approx. capacity 600 linear metres/hour Working height Approx. 900 mm Approx. machine weight 2,100 kg Gelhszt R Tfjcdw Debr (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Catalogue number 7445 TECHNICAL DATA - Track width: 250 mm - Roller width: 400 mm - Max. blade diameter: 400 mm - Blade bore diameter: 80 mm - Max. cutting height: 140 mm - Table width with clearance: 730 mm - Table length: 2120 mm *From above: - Pawls - Pressure roller, smooth - Pawls Golhcdjza D Rrsw Dsbr - Pressure roller, smooth - Saw shaft - Smooth pressure rollers, 2 pcs. From below: - Guide - Sliding shaft, smooth - Pawls - Track - Central lubrication - 2 lasers - Infinitely variable feed speed adjustment - Feed motor: 1.1 kW - Main motor: 37 kW - Electric lifting of the frame: 0.75 kW - Electric lifting of the saw shaft: 0.75 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 2200x1850x2100 mm - Weight approx.: 3000 kg ADVANTAGES – German manufacture – Laser – Electric lifting of the frame and shaft – Infinitely variable feed speed adjustment – Used multi-blade saw, in very good condition Net price: 109,900 PLN Net price: 26,160 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant rate fluctuations)

Condition: used, Year of construction: 2010, Cutting area: 5300 x 2240 x 80 mm Vertical distance between cutting interfaces: 1000 mm Feed rate: 10-25 m/min Scoring saw unit VSA (infinitely variable) Free-standing supports, complete Electronic positioning system CON, EPSx Electronic positioning system CON, EPSy Gbjlhcozt N Dcjdw Dsr Automatic edge trimming, top edge Paper holder Small parts support, complete (2-part) Location: Supplier

Condition: used, Year of construction: 2006, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 303 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Lower support: retractable roller support Material support: closed wood support Small parts support: Yes Measuring system: horizontal/vertical digital Swiveling saw head: pneumatic Saw feed: manual Mounting: wall mounting Dust extraction: external dust extraction Saw beam locking: automatic Gbolhcozt N A Sedw Djr Description: with scoring saw Motor power: 5.5 kW Location: Nattheim

Condition: ready for operation (used), Year of construction: 2004, total width: 1,450 mm, total height: 1,900 mm, overall weight: 1,500 kg, product length (max.): 2,700 mm, Circular Metal Saw manufactured in 2004. This KALTENBACH SKL450NA features a saw blade diameter of 450 mm and a cutting capacity of 150 mm for round materials. With a weight of approximately 1.5 tons, it includes a loading magazine for enhanced efficiency. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH SKL450NA machine we have for sale. Contact us for further details. • Total installation length (foundation plan): 3226 mm • Saw blade diameter: 450 mm • Saw blade type: HM / HSS (DIN 8576) • Blade bore: 50 mm • Number of fixing screws: 4 • Bolt circle: 80 mm • Fixing screw diameter: M12 • Cutting capacity (round): 150 mm • Cutting capacity (rectangular): 140 × 160 mm • Cutting capacity (square): 140 × 140 mm • Saw blade feed speed: 0–3500 mm/min • Rapid return: 4500 mm/min Gelhcdszt Nnujw Dsbr • Cutting speed (at 400 mm blade): 1950 / 3900 m/min • Feed speed (material feed): 10 m/min (optional: 10 / 20 m/min) • Adjustable cut lengths: 10–1000 / 2000 mm • Miter adjustment: Stepless ±90° (manual) • Drive power: 3.7 / 4.7 kW (optional: 4.7 / 6.3 kW) • Compressed air connection: 6–8 bar • Control system: Kaltenbach PLC • Lubrication: Micro spray system Additional equipment • Loading magazine: T3 / L 45 E • Loading length: 6 m

Condition: used, Year of construction: 2007, total width: 1,070 mm, total length: 9,000 mm, total height: 1,420 mm, Colour: Blue Weight: 1.500 kg - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 48-2007-1403 - Main motor power [kW]: 5.5 - Max. cutting depth [mm]: 320 - Max. cutting height [mm]: 100 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 30 - Table length [mm]: 5000 - Table width [mm]: 350 - Spindle speed control: Not applicable - Voltage [V]: 400 Golhcdwszt Hy Ue Djbr - Current consumption [A]: 10.3 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 9000mm x 1070mm x 1420mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Model: HOLZ-HER 100 L-2 Cutting length: 5,300 mm Cutting height: 2,100 mm Power: 3 kW S1 / 4 kW S6 ED 40% Voltage: Y 380 V, 3~ 50 c/s Speed: 2840/3740/min Gboljzt Dy Sehcdw Djr Fully functional This saw is ideal for rough cutting. Availability: short notice Location: near Mannheim

Condition: ready for operation (used), Year of construction: 2020, saw blade speed: 4,000 rpm, Panel saw manufactured in 2020. This FIMAL concept 350 features a squaring length of 3200 mm and a blade diameter range of 300 to 350 mm. It operates at a blade rotation speed of 4000 rpm and has a main motor power of 7.5 hp. If you are looking to get high-quality cutting capabilities, consider the FIMAL concept 350 machine we have for sale. Contact us for further details. • Model: Concept 350 – 3200 • Squaring length: 3200 mm Gbolhcdezt Dlhew Dsr • Blade diameter: 300–350 mm • Blade inner hole: 30 mm • Blade projection (90°): 100 mm (75 mm) • Blade projection (45°): 67 mm (45 mm) • Blade group speed (inverter): 40 m/min • Main motor power: 7.5 hp (5.5 kW) • Extraction outlet: 120 / 100 mm • Extraction air volume: 1800 m³/h • Extraction air speed: 25 m/s • Operating pressure: 7 bar • Air consumption: 85 l/h

Condition: ready for operation (used), Year of construction: 2017, overall weight: 2,880 kg, This SCM SIGMA PRIMA 67 panel saw was manufactured in 2017. Ideal for precise wood panel cutting, it offers reliable performance for your woodworking projects. Consider the opportunity to buy this SCM SIGMA PRIMA 67 panel saw. Contact us for more information. Machine Benefits Technical Machine Benefits • The panel saw is mainly intended for cutting boards sized 2800 x 2070 mm and these are the formats that were typically processed. The working range of the panel saw is 3800 mm on one of the axes. Extra Information Gslhcdozt Diyjw Dsbr Media Electrical specifications: Voltage: 400 V Phases: 3 Nominal current: 22 A Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2018, cutting length (max.): 4,300 mm, Panel saw manufactured in 2018. This HOMAG PROFI HPP 300 / 43 / 43 features a cutting length of 4,300 mm and a cutting width of approximately 4,250 mm. It has a maximum saw carriage feed speed of 130 m/min and a maximum saw blade diameter of 350 mm. If you are looking to get high-quality panel cutting capabilities, consider the HOMAG PROFI HPP 300 / 43 / 43 machine we have for sale. Contact us for further details. • Cutting width (programmable pusher): approx. 4,250 mm Golhcdezt Ditow Djbr • Max. saw carriage feed speed: 130 m/min (optional up to 150 m/min) • Saw blade projection: 80 mm (optional 95 mm) • Max. saw blade diameter: 350 mm • Main saw blade diameter: 350–380 mm (depending on configuration) • Main saw motor: 11 kW • Scoring saw motor: adjustable, 1.5–2.2 kW • Clamps: 7 units (2-finger design) • Control system: CADMATIC 4.1 / 4.5 or powerTouch (depending on configuration) • Total connected load: approx. 18.4 kW • Compressed air: 6 bar • CE marking: Yes • Stack height: up to approx. 80 mm (standard) • Extraction capacity requirement: approx. 3,350–5,230 m³/h • Processing: Single panels and stack cuts

Condition: ready for operation (used), Year of construction: 2008, cutting length (max.): 4,300 mm, Panel saw manufactured in 2008. This HOLZMA HPP 350/43/38 features a saw blade projection of 80 mm and a cutting length of 4300 mm, providing efficient cutting capabilities. It includes a powerful main saw motor of 13.5 kW and a scoring saw motor of 2.2 kW. If you are looking to get high-quality panel cutting capabilities, consider the HOLZMA HPP 350/43/38 machine we have for sale. Contact us for further details. • Power/control: CADmatic 4 • Saw blade projection: 80 mm • Saw carriage speed (forward/reverse): 1–150 m/min / 150 m/min • Program fence speed (forward/reverse): 90 m/min / 90 m/min • Main saw motor: 13.5 kW • Scoring saw motor: 2.2 kW • Working height: 920 mm • Main saw blade: 350 x 4.4 x 60 mm • Scoring saw blade: 180 x 4.4–5.4 x 45 mm • Cutting width: 3700 mm • Service/condition: Regularly serviced with annual inspection by a Homag technician. In 2021, a new control computer (Windows 10) was installed with updated machine control software. Additional equipment Gbslhcdwozt Digs Dsr • Label printer Pica 108 • Optimization program CAD-Plan 4 • CadLink interface/software • Kit for gypsum panels

Condition: ready for operation (used), Year of construction: 2022, Panel saw manufactured in 2022. This FELDER K 945S features a maximum cutting height of 155 mm and a maximum cutting width of 1250 mm. It includes a sliding table with a cutting length of 2800 mm and a powerful 5.5 kW main saw motor. If you are looking to get high-quality cutting capabilities, consider the FELDER K 945S panel saw we have for sale. Contact us for further details. • FELDER K 945 S sliding table saw • Manual blade angle adjustment with angle display and handwheel • Tilting saw unit 90°–45° • Blade diameter range: 250–450 mm • Maximum cutting height: 155 mm • Electric height adjustment • Maximum cutting width: 1250 mm • Main saw motor 5.5 kW (7.5 HP), 3x400 V, soft start, CE brake • Three spindle speeds: 3500 / 4500 / 5500 rpm • PCS (Preventive Contact System) safety system with optical status indicator; resettable after activation • Antistatic belt for PCS system • Sliding table, cutting length 2800 mm, anodized aluminum • 10-year warranty on the X-Roll sliding table system • Parallel fence with round guide bar, D = 50 mm • Rip fence 2600 mm with clamping system for extension table 1300/1500 • Extension table for cutting lengths 2500–3200 mm • Support surface: 1150 x 640 mm • Crosscut fence 3200 mm with 2 flip stops • Overhead guard for 1250 mm cutting width with 100 mm dust extraction connection • Machine stand for K 945 S, cast iron saw table; operating tools included • User manual in Czech • Additional warranty: 3 years on machine parts (valid when commissioned by an authorized FELDER technician) • Transport packaging for sliding table • Standard pallet: 2100 x 1500 x 1500 mm Additional equipment • Dust extraction system: • Mobile dust extractor AF 22 • 4.0 HP (3.0 kW), 3x400 V, 50/60 Hz • Standard dust filter Golezt Diajhcdw Djbr • Connection ports: 120 mm and 80 mm • Dust extraction hoses: • 4 x industrial extraction hose H/SE Ø120 mm • 4 x industrial extraction hose H/SE Ø100 mm • Heavy-duty, abrasion-resistant, flame-retardant; smooth internal surface • Spare parts included: • Adjustable support rail (106ND) • Cross roller rail plate (Fen-Grau) • Clamp rail lower section • Compression spring • Clamp rail upper section • Additional machine spare part (222MB)

Condition: ready for operation (used), Year of construction: 2022, This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information. • Working size: 3800 x 2200 mm • Max cutting length: 3800 mm Gjljzt Dh Njhcdw Dsbr • Saw blade projection: 108 mm • Max gripper opening: 100 mm • Min panel size: 1830 x 915 mm • Max panel size: 3660 x 2200 mm • Max packet height: 630 mm • Condition: Almost new, used only a few months Additional equipment • Back lift table: • Minimum panel thickness on lift table: 10 mm • Maximum lift: 985 mm • Lift table capacity: 5 t

Condition: ready for operation (used), Year of construction: 2007, cutting length (max.): 3,000 mm, Panel saw manufactured in 2007. This Altendorf F 45 features a cutting length of 3000 mm, a main saw with a power of 5.5 KW, and a maximum main saw blade diameter of 500 mm. If you are looking to get high-quality cutting capabilities, consider the Altendorf F 45 panel saw we have for sale. Contact us for further details. • Main saw motor power: 5.5 kW Gslhcdwszt Dh Ae Debr • Main saw blade diameter: max. 500 mm • Scoring saw motor power: 0.75 kW • cutting length 3000 mm

Condition: ready for operation (used), Year of construction: 1995, This SCHELLING FLM 365.002 panel saw was manufactured in 1995. It features a main saw blade diameter of 400 mm and a scoring saw blade diameter of 200 mm, with a maximum saw blade projection of 80 mm. The machine is capable of processing materials like acrylic and glass-fiber reinforced plastic, with a maximum panel length of 3000 mm and a maximum thickness of 80 mm for acrylic. Consider the opportunity to buy this SCHELLING FLM 365.002 panel saw. Contact us for further details. Golhcdwezt A T Re Djbr • Technical data: • Main saw blade diameter: 400 mm • Scoring saw blade diameter: 200 mm • Max. saw blade projection: 80 mm • Max. clamp opening: 100 mm • Max. stack height: 60 mm • Main motor power (50/60 Hz): 15 / 18 kW • Saw unit feed speed: 0.2 – 22 m/min • Saw unit return speed: 22 m/min • Forward feed speed: 10 m/min • Backward feed speed: 10 m/min • Working height: 930 mm • Performance and requirements: • Processable materials: Acrylic, glass-fiber reinforced plastic (GFRP) • Max. panel length: 3000 mm • Max. panel width: 2200 mm • Max. thickness (Acrylic): 80 mm • Max. thickness (GFRP): 60 mm • Edges: deburred • Panel flatness: max. wave 5 mm • Thickness tolerance: ±0.2 mm • Electrical power consumption: approx. 25 kW • Supply voltage: 380 V / 50 Hz • Compressed air requirement: approx. 100 l/min (6 bar) • Extraction requirement: approx. 4000 m³/h (air speed 32 m/s) • Equipment (included with the machine): • Scoring unit • Servo-driven feed (0 – 40 m/min) • Side guides on roller table, automatic adjustment; adjustment range 80 – 2200 mm • Safety light curtain with separate support frame • Hold-down clamps (according to machine configuration) • Cooling and spraying system • Computer control – COMMANDER (PLC/SPS) with display, membrane keyboard, diagnostic system • Graphical display of cutting plans • Electrical cabinet and control integrated in the machine • Slow scoring / pre-cut function

Condition: ready for operation (used), Year of construction: 2018, Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40–100% via frequency converter • Workpiece capacity • Input length (min/max): 400–6,300 mm • Width (min/max): 20–300 mm • Thickness (min/max): 10–120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max 2 mm/m or 8 mm over entire length • Table inclination: 10° • Motion and accuracy • Positioning speed (reverse stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm Gbjlhcozt A Sgsdw Dor • Motors and power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical load: approx. 15 kW • Control and interface • Control unit: OptiCom Pro with 18.5" touch screen • Screen resolution: 1366 x 768 pixels • Protection class (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Utilities and environment • Voltage: 400 V / 50 Hz • Operating pressure: 6–8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction connection: diameter 125 mm • Required extraction performance: speed approx. 30 m/s; volume approx. 1,300 m³/h • Noise level (idling): ≤ 85 dBA

Condition: ready for operation (used), Year of construction: 2025, This Optimizing Cross-Cut Saw was manufactured in 2025. It features a robust frame with a special inclined support surface for easier loading and squaring, and a high-precision pushing system. The cutting unit is equipped with a carbide-tipped circular saw and adjustable cutting speed. It includes a computer with CNC software for enhanced productivity and safety. Consider the opportunity to buy this Salvador Superpush 200. Contact us for more information about this machine. Additional equipment • Outfeed Table: Made of solid steel with a 30° incline. Length 3000 mm. • Safety Features: Rear protective cover, dual dust protection, and automatic lubrication. Machine Benefits Qualitative Machine Benefits • Cutting cross-section: max 240x150 / 300x110 mm, min 30x15 mm • Pusher slide dimensions: 300 x 345 x 25 mm • Feed speed: adjustable max feed speed set to 60 m/min • Pusher drive system: brushless dc servo drive motor with electronically controlled feed. • Productivity enhancements: increases productivity and improves wood yield. • Reliability features: robust construction with thick, reinforced steel frame. • Processing accuracy: two electropneumatic aligners ensure square cuts. Technical Machine Benefits • Special inclined surface with a 30° angle, intelligent clamping, and automatic lift pusher during scanning. • Windows-based software with a 22" led color display and remote maintenance capability. • Electronic system: real-time communication with a modern computer-aided cnc. • Software: linux-based optimization algorithm with a windows 10 interface. • Pc features: intuitive s4u software, extensive customization, real-time updates, error detection, and remote maintenance software. • Saw motor power: 5. 5 kw Gbslhcdozt A Saow Dsr • Saw blade type: carbide-tipped circular saw • Blade diameter: 500 mm • Number of teeth: z=108 • Board length before cutting: max 4100 mm, min 500 mm Extra Information Machine still under power. Please contact us for consultation and a custom-tailored offer.

Condition: ready for operation (used), Year of construction: 2021, cutting length (max.): 2,700 mm, workpiece width (max.): 110 mm, Optimizing Cross-Cut Saw manufactured in 2021. This Paul Reinhardt SlimLine 110 features automatic cutting capabilities, accommodating wood lengths from 300 to 3000 mm and widths from 30 to 350 mm. It is designed for various wood types, including MDF and solid wood, with a maximum cross-section of 58 x 125 mm. If you are looking to get high-quality cutting capabilities, consider the Paul Reinhardt SlimLine 110 machine we have for sale. Contact us for further details. • Condition: Not rebuilt – sold without warranty • Cutting direction: right to left • Wood types: MDF, particleboard, solid wood, Kerto, plywood • Workpiece dimensions: • Length: 300–3000 mm • Width: 30–350 mm • Minimum cross-section: 15 x 30 mm • Maximum cross-section: 58 x 125 mm • Processing: automatic cutting • Working height: 900 mm • Electrical supply: 400 V / 50 Hz / 3 Ph • Main motor: 5.5 kW (400 VΔ / 690 VY, 50 Hz) • Control: Electronic control with Windows 10 and Beckhoff TwinCAT • Optimization: Full optimization without error cutting Golhozt A R Njcdw Dobr Additional equipment • Feeding with 3 buffer stations (infeed buffering/automation) • Software/add-ons: • Backlog monitoring • PALETTI Process Viewer • PALETTI Office

Condition: ready for operation (used), Year of construction: 2007, This PANHANS POLYPAN 47 F panel saw was manufactured in 2007. It features a cutting length and width of 4200 mm, main saw blade diameter of 350 mm, and a main saw motor power of 11 kW. The saw carriage offers variable feed speeds up to 80 m/min. Ideal for precise, large-scale panel dividing. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Gbolhcdwjzt A R Aj Der • Cutting length: 4200 mm / cutting width: 4200 mm / main saw blade diameter: 350 mm / cutting height (max): 72 mm / saw exit (max): 82 mm / main saw motor: 11 kw / main saw speed: 4980 rpm / scoring saw motor: 2. 2 kw / speed of scoring saw: 0. 55 kw / feed speed of saw carriage: infinitely variable, 0 - 80 m/min / return speed of saw carriage: 80 m/min / frequency drive width stop: 1. 1 kw / width stop in front: infinitely variable, 0 - 25 m/min / width stop return speed: 80 m/min / operating pressure: 6 - 8 bar / x-axis: linear guide, servo drive 80 m/min / z-axis: linear guide, servo drive downwards: 20 m/min, upwards: 15 m/min • Drilling/milling head / 14 drilling spindles (standard) / drive: 4 kw / vertical drilling speed: 7280 rpm / extension stroke: 50 mm / max. Drilling depth: 45 mm / tool holder: weldon Ø10 • Smallest part to be machined: min 80 x 250 mm / largest part to be machined: max 2650 x 2070 mm • Working path y: 2100 mm / working path x: 3000 mm