Used compressors for sale (57)

Year of construction: 2026, condition: used, New demonstration machine!! This compressor offers a 100% duty cycle and is designed for high-pressure applications as well as extreme conditions. It is particularly suitable for expanding existing compressed air systems and can withstand even the highest working pressure continuously. Equipped with a direct-drive, single-stage, 2-cylinder industrial unit, it features a special relief valve (from 5.5 kW) and a star-delta switch directly on the console (from 5.5 kW). The air outlet is via a 2-meter hose with a 1/2" internal thread connection. Maintenance is easy thanks to easily accessible parts and long maintenance intervals. A soundproofing cover, an oil level switch, and a controlled relief valve can be optionally retrofitted. Technical data: Intake capacity 1146 l/min, Delivery capacity 702 l/min, Max. pressure 10 bar, Cylinders/stages 2/1, Voltage 400 V/3/50 Hz, Motor power 5.5 kW, Speed 1400 rpm, Sound pressure level 80 dB(A), optionally soundproofed 68 dB(A), Dimensions (W x D x H) 1073 x 693 x 721 mm, Air outlet G 1/2" internal thread, Weight 101 kg, Stationary piston on console. Piston compressor for applications up to 10 bar. Smooth-running, direct-drive, 2-cylinder industrial unit with single-stage compression, suitable for many applications in the industrial sector. Applications: Expansion of compressed air systems; operation in combination with screw compressors. Highest quality of components used. Complete equipment: Pressure switch, start-up relief, motor protection, safety and check valve; YD switch. Location: Rieth. Lodpfj Adu Npox Albeah

Year of construction: 2008, condition: used, Receiver capacity 90 l 750 L/min Motor output 4,0 kW Used Machine Year of Manufacture: 2008 Features and Technical Specifications: - Motor Connection: 400 V - Motor Power: 4.0 kW - Tank capacity: 90 L - Suction capacity: 750 L/min - Effective flow rate: 560 L/min - Cylinders: 2 Lodpsz Dkzzjfx Albsah - Speed: 1,450 rpm - Max. pressure: 11 bar - Weight: approx. 103 kg

Year of construction: 2023, condition: used, Used Machine Year of Manufacture: 2023 Features and Technical Specifications: - Stationary, oil-lubricated 2-cylinder piston compressor - Two-stage compression - V-belt drive - Intercooler and aftercooler - Condor pressure switch - Motor protection and safety valve - Tank pressure gauge Ledozy Dziepfx Albjah - Check valve and relief valve - Condensate drain valve - Additional connection fittings with blind plugs - Rubber vibration dampers - Manhole opening for tank inspection - Tank compliant with AD-2000 regulations - Suction capacity: 660 l/min - Effective flow rate: 520 l/min - Maximum operating pressure: 10 bar - Motor power: 4.0 kW / 5.5 PS - Power connection: 400 V / 50 Hz - Start type: Direct start - Speed: 1,025 rpm - Vertical, internally coated 270-liter compressed air tank - Air outlet: 3/4-inch female thread with shut-off valve - Sound pressure level: 78 dB(A) - Dimensions: 750 × 705 × 1,800 mm - Weight: approx. 170 kg

Year of construction: 2020, condition: excellent (used), Stationary Piston Compressor Aircraft AIRPROFI 703/270/10 V Used: Year of manufacture 2020 - Top condition - Stationary compressors with a vertical 270 l tank offer maximum performance in a compact space. Robust design and best quality Fully automatic on/off operation Equipped with all safety devices Completely ready for connection Fifteen-year guarantee against rust on the internally and externally hot-dip galvanized compressed air tank Quality electric motor High-quality electric motor with high starting torque is equipped with a motor protection switch Starting capacitor and starting relief valve ensure easy starting Standard equipped with a phase inverter for easy manual reversal of the direction of rotation Compressed air compression via high-performance HOS unit The starting relief valve ensures easy, pressure-free starting The two-cylinder high-performance unit made of gray cast iron and the low speed guarantee particularly quiet and low-vibration operation; this ensures a long service life due to minimized wear Optimal lubrication of the compressor for high service life and reliability Equipped with a high-quality intake filter Aftercooler with large cooling fins results in a low tank inlet temperature and less moisture in the compressed air to protect the compressed air tools Additionally with an intercooler to the aftercooler Corrosion-resistant valve plates for improved heat dissipation and longer service life of the compressor Optimal cooling of the compressor by a large fan wheel and a cooling air deflector on the cylinder Stable metal belt guard for optimal protection of the components and for high user safety No vibration breaks in the compressed air supply line to the tank due to flexible armored hose with heat protection High-quality drive belt Powerful and efficient drive The toothed drive belt facilitates starting, improves running smoothness and power transmission, and reduces power consumption by up to 30% Lsdpfx Alsz Rq Eujbjah Stable metal belt guard Operation on the service block Equipped with a high-quality CONDOR pressure switch with a robust push-button function for fully automatic on/off operation Air outlet on the service block via a comfortable safety quick coupling Only fixed screw connections on the service block, no hose connections High-quality tank with permanent rust protection Air outlet ¾" Length (product) approx. 780 mm Width/Depth (product) approx. 680 mm Height (product) approx. 1870 mm Weight (net) approx. 152 kg Automatic pressure switch CONDOR Drive transmission V-belt, toothed Material of compressed air line Flexible armored hose with heat protection Compressed air outlet Ball valve Condensate drain Condensate drain valve Compressed air tank Internally and externally hot-dip galvanized with a fifteen-year guarantee AD 2000 compliant yes Tank base Vibration dampers Connection plug 400V CEE plug with phase inverter Connection voltage 400 V Mains frequency 50 Hz Output power 4 kW Input power 4.81 kW Sound pressure level Lp 83 dB(A) Explanation of sound pressure level Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor system HOS Intake capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation of filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 950 min¯¹ Maximum pressure 10 bar Tank capacity 270 l Location: available from stock in 54634 Bitburg - immediately available -

Year of construction: 2022, condition: like new (used), Used Machine Year of Manufacture: 2022 Condition: Like new, very few operating hours, not used in production Features and Technical Specifications: - Compact screw compressor with variable speed control and innovative LOGIN control system - Includes air receiver and refrigerated dryer - Maximum pressure: 10 bar - Effective air delivery: 1,050 l/min - Motor power: 7.5 kW - Noise level: 62 dB(A) - Connection: 1/2 - Tank capacity: 270 liters (AD2000) - Variable-frequency drive - Electronic control Lodpfjzk Nrzsx Albjah - Oil heat exchanger - Compressed air receiver hot-dip galvanized inside and out - Drive transmission: Direct coupling - Starting method: Star-delta - AD 2000 compliant: yes Dimensions: 1,200 × 650 × 1,540 mm Weight: 295 kg Availability: available shortly Storage location: Röllbach

Year of construction: 2015, condition: used, Used Machine Year of manufacture: 2015 with refrigerated dryer Features and technical specifications: - Pressure: 10 bar - Suction capacity: 660 l/min - Speed: 1025 rpm - Tank capacity: 270 l - Noise level: 78 dB(A) - Effective flow rate: 520 l/min - Air outlet: 3/4"i - Drive power: 4 kW - Air intake capacity: 660 (l/min) - Drive type: V-belt - Tank design: vertical Lodezk Nqkjpfx Albsah - Power (kW): 4.0 - Voltage (V): 400 V - Starting method: Direct-on-line (DOL) - Compression type: 2-stage Dimensions: 750 x 705 x 1800 mm Weight: 170 kg With DK 985 Eco refrigerated dryer: - Airflow at a pressure dew point of 3 °C: 600 l/min - Power consumption: 0.3 kW - Pressure drop: 0.25 bar - Voltage: 230 V - With automatic condensate drain - Dimensions: 325 x 263 x 745 mm - Weight: 25 kg Availability: Immediate Storage location: 63934 Röllbach

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. Laodpfx Ajzn N Ecelbsh • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Condition: good (used), Year of construction: 2002, functionality: fully functional, overall weight: 700 kg, The 30 kW screw compressor has been disassembled and is ready for shipment. Lasdpfx Alezb Dq Ioboh

Condition: excellent (used), Year of construction: 2008, PROD. MAUGUIERE TYPE MAV400 S/N CAI027542 YEAR 2001 POWER (kW) 30 OUTPUT (m3/min) PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 60238 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) no ON TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED Laodpsz Eap Dsfx Alboh

Year of construction: 2015, condition: used, Used Machine Ljdpfoz Ek Drex Albsah Year of Manufacture: 2015 Features and Technical Specifications - Stationary piston compressor with 2 two-stage, two-cylinder, high-performance gray cast iron units designed for a long service life - Maximum flow rate: 2 x 960 l/min - Filling capacity: approx. 2 x 750 l/min - Maximum pressure: 10 bar - Tank capacity: 500 l - Motor power: 2 x 5.5 kW - Power supply: 400 V - Dimensions L x W x H: 2020 x 570 x 1340 mm - Sound pressure level at 1 m distance per DIN 45635: 83 dB(A) - With base load alternating control - 1st unit: 428 operating hours - 2nd unit: 418 operating hours

Year of construction: 2007, condition: used, Screw compressor with refrigeration dryer - Manufacturer: Boge - Model: C9 Laedpfx Asz Hm Rkelbjh - Year of manufacture: 2007 - Max. pressure: 8 bar - Max. air flow: 1,180 m³/min. - Motor power: 7.5 kW - Width x depth x height: 480 x 987 x 1,234 mm - Volts/Hz: 400/50 - Weight: 210 kg Refrigerated dryer - Boge Ultratroc - Type. SD 0050 AP - max. 16bar - Location: Warehouse, D-32825 Blomberg

Condition: used, Screw Compressor SCHNEIDER AM B7.5 10 – used – ----- Technical Specifications ----- Lajdpjy Dp Swofx Alboh Max. pressure: 10 bar Motor: 7.5 kW Air delivery at 10 bar: 1,000 l/min Weight: 250 kg Operating hours: 6,922 h Load hours: 2,083 h Year of manufacture: 2017

Year of construction: 2009, condition: used, Used Machine Features and Technical Specifications: - Environmentally friendly thanks to the use of R404A - Energy savings thanks to a rotary refrigerant compressor (20–30% more efficient than a conventional piston compressor) - Intelligent drain system - Max. operating pressure: 13 bar - Processed compressed air volume: 5,200 l/min, 7,312 m²/hr Ledpfezk Nrhex Albeah - Motor power: 1.58 kW, 230 V - Max. inlet temperature: 55 °C Dimensions: 557 x 460 x 789 mm Availability: Available shortly Storage location: Röllbach

Year of construction: 2020, condition: used, Compressor Manufacturer: März Lodpfx Aljz Hwkhobsah Type: RSDK-Pro 5.5 Year of manufacture: 2020 Technical data Delivery rate: 780 l/min Power requirement: 5.5 kW Maximum permissible operating pressure: 10 bar Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2013, functionality: limited functionality, overall weight: 100 kg, Dismantled from an unused production line, in perfect condition. Without servo motors. 3 units available. Unit price: net 9,500 EUR Ledpfx Aoxzc Iwslbjah

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic Lsdpozu Aibofx Alboah - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Vertical piston compressor with sound-dampening hood, DK 600Eco UNM STS 660-10-270 - Year of manufacture: 2013 - With mounted refrigeration dryer, 660 l intake capacity, 520 l delivery rate - 10 bar - Weight 245 kg - Sound-dampening hood - Condensate drain 4 kW, 400 Volt - Width 960 mm, Depth 740 mm, Height 1905 mm - Noise level 69 dB (A) - Very few operating hours - ABSOLUTELY LIKE NEW - TÜV inspection valid until August 2026, with corresponding inspection certificates Lajdpfxoypkr Ue Albsh Transportation available for an extra charge!

Condition: good (used), Year of construction: 2010, MANUFACTURER: BRAND MODEL: MSC37/10 SERIAL NO.: API200079 YEAR: 2010 POWER (kW): 37 Lajdpfxjylbd Tj Albeh CAPACITY (m3/min): 6.70 PRESSURE (bar): 10

Year of construction: 2018, condition: used, Compressor system Manufacturer: Atlas Copco Lodpfxozu Al As Alboah Type: GA15VSD+FF Year of manufacture: 2018 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: ready for operation (used), functionality: fully functional, motor power 11kW working pressure 10bar capacity 1,59m3/min Ljdpfx Aley N N Rwebeah

Condition: used, Technical specifications: Tank capacity: 500 l Max. pressure: 10 bar Number of cylinders: 2 x 2 cylinders Power supply: 400 V Engine speed: 1400 rpm Engine power: 2 x 4 kW Lajdpfx Aszvmmgslboh Overall dimensions: Length: 3100 mm Width: 650 mm Height: 1300 mm

Condition: new, Compressor AIRCRAFT Airprofi 703/100 – used – Galvanised tank, incl. pressure regulator, Year of manufacture 2018, unused, SPECIAL PRICE instead of promo price 1,699,-- ----- Technical Data ----- Tank capacity: 100 litres, Ljdpfx Alj Aaz Tmebeah Max. air displacement: 650 litres, Max. pressure: 10 bar, Motor: 4 kW, Speed: 950 rpm, Sound pressure level: 93 dB - new demonstration unit -

Condition: good (used), Year of construction: 1992, functionality: fully functional, 1 x screw compressor Make RF 10 YD Year of manufacture: 1992 with refrigerant dryer Renner RKT CQ 0065 Year of manufacture: 2017 Lsdpfx Aezgc Sgelboah + receiver tank OKS 500 liters / max. 11 bar Year of manufacture: 1998 Technical data: max. pressure 10 bar Power: 7.5 kW Air flow rate: 930 l/min Operating noise: 70 dB (A) The system can be inspected while it is running.

Year of construction: 2018, condition: used, Compressor design: screw compressor Pressure: 10 bar Volumetric flow rate: 1080 l/min Condensate drain: automatic Ljdpfx Alox Hwq Hsboah Weight (approx.): 240 kg Motor power: 7.5 kW Electrical connection (approx.): 400 V Workshop overhauled: new filters, oil change, etc. Location: customer

Year of construction: 2017, condition: used, Air dryer Weight 128 kg Compressed air pressure 13 max Ambient temperature max 46°C Laodpfx Alew Da Ensboh