Condition: good (used), Year of construction: 2004, functionality: fully functional, Fanuc control, 16 mm spindle bore, sub-spindle, 3 driven radial tools, high-pressure pump, fire extinguishing system, FMB bar feeder, Bedoyyxqnepfx Ab Iolf extensive accessories.

Condition: excellent (used), Year of construction: 2008, spindle bore: 52 mm, turning diameter over bed slide: 400 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 1,209 mm, total height: 1,800 mm, overall weight: 2,100 kg, Centre lathe Mexpol - TUB40 Blsdjyyxm Aspfx Ab Iof MACH-ID 9477 Make: Mexpol Type: TUB40 Year: 2008 DBC Turning Length: 1000mm Swing over bed Ø: 400mm Swing over cross slide Ø:250mm Spindle bore: 52mm Spindle power: 5.5kW Bed width: 300mm Tailstock spindle Ø: 60Ø Stroke pinole: 130mm Spindle taper: 4Mk Power: 5.5kW Speeds / ranges: 2135Rpm Feed rate X-Axis: 2000mm/min. Feed rate Z-Axis: 1000mm/min. Length: 2200mm Width: 1209mm Height: 1800mm Weight: 2100kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2007, operating hours: 5,217 h, turning length: 285 mm, spindle bore: 91 mm, travel distance X-axis: 1,000 mm, travel distance Z-axis: 285 mm, spindle motor power: 26,000 W, total height: 2,200 mm, total length: 3,200 mm, total width: 2,300 mm, overall weight: 6,600 kg, CNC Lathe MAZAK - QTN 300-II MACH-ID 9480 Make: MAZAK Type: QTN 300-II Control: Mazatrol Matrix Nexus Year: 2007 No Tailstock Automatic doors Tool eye Chip conveyor Max. turning Ø:830mm X-Axis: 1000mm Z-Axis: 285mm Spindle bore: 91mm Speedrange: 5000Rpm Spindle power: 26kW Hours: 5217H Length: 3200mm Width: 2300mm Bodpsyyxlfjfx Ab Ielf Height: 2200mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, functionality: fully functional, Fanuc control, Bsdpfxeyyxkzo Ab Ielf spindle bore 26 mm, sub spindle, 4 driven tools (axial) for sub spindle, 3 driven tools (radial) for main spindle and sub spindle, FMB bar feeder, fire extinguishing system, high-pressure pump, lots of accessories.

Condition: excellent (used), Year of construction: 2007, turning length: 535 mm, spindle bore: 65 mm, travel distance X-axis: 225 mm, travel distance Z-axis: 535 mm, spindle motor power: 26,000 W, total height: 1,900 mm, total length: 2,900 mm, total width: 2,300 mm, overall weight: 4,380 kg, CNC Lathe MAZAK - QTN 200-II MACH-ID 9481 Make: MAZAK Type: QTN 200-II Control: Mazatrol Matrix Nexus Year: 2007 Max. turning Ø:610mm X-Axis: 225mm Z-Axis: 535mm Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 26kW ATC / revolver:12 Chip conveyor: Yes Tool eye: Yes Hours: 5049H Length: 2900mm Width: 2300mm Bjdpfjyyxh Tsx Ab Ijlf Height: 1900mm Weight: 4380kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2013, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, Bedpfx Abswnfzco Iolf 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: excellent (used), Year of construction: 2009, Heidenhain digital display Working area Centre height: 310 mm Centre distance: 1625 mm Max. turning diameter in the gap: 880 mm Max. turning diameter over bed: 620 mm Turning diameter in front of the longitudinal carriage: 580 mm Turning diameter over cross slide: 425 mm Bed width: 350 mm Length of the gap in front of the faceplate: 200 mm Blsdpfjyyv N Uex Ab Ijf Main spindle bore: 80 mm Spindle mounting: DIN 55027/8 Optional Camlock spindle mounting: DIN 55029/8 12 spindle speeds: 30 – 1500 rpm Cross slide travel: 365 mm Top slide travel: 165 mm Drive power: 5.5 kW Coolant pump motor power: 0.06 kW Weight: 1805 kg

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: DMG MORI SLIMline multi-touch, number of slots in tool magazine: 42, This DMG MORI CLX 350 V3 was manufactured in 2023. A universal turning machine featuring driven tools and a C-axis. It includes a hydraulic 3-jaw chuck D210mm, a 12-slot servo tool turret holder VDI 30 with 12 driven tool stations, and a hollow clamping device with a max. bar capacity of D65mm. A great opportunity to buy this DMG MORI CLX 350 V3 universal turning machine. Contact us for further details regarding this machine. Additional equipment • Direct path measuring system X axis • Chip tray • Hollow clamping device • Hydraulically movable tailstock via M-function Blodeyyuv Topfx Ab Ief • External electronic handwheel • DMG Mori IoTconnector • Machine includes tool holder, chuck and jaws Extra Information • Main spindle: a2-6 with ac motor • Hydraulic 3-jaw chuck diameter: 210 mm • Max. Bar capacity: 65 mm • Driven tools and c-axis for enhanced machining capabilities • 190 Spindle hoursMachine still under power

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 6,000 rpm, travel distance Z-axis: 700 mm, spindle motor power: 32,000 W, controller manufacturer: SIEMENS, controller model: C200-sl, number of axes: 5, This 5-axis Index C200 was manufactured in 2023, offering advanced capabilities for horizontal turning. Ideal for precision and efficiency in metalworking, this machine represents a significant asset for enhancing production quality. Consider the opportunity to buy this Index C200 horizontal turning machine. Contact us for more information. Additional equipment • Software options: OPC UA for master computer connection (max. 200 variables). ChipMaster cycle for chip breakage control. • Environmental data: Noise level: 73.8 dB(A) Machine Benefits Technical Machine Benefits • Control system: based on sinumerik 840d solutionline (sl) with sinamics s120 drives. 18. 5" tft color display with pct-touch (ip65). Siemens operate user interface in german. • Interfaces: 4x usb 2. 0 (2 on the control panel, 2 in the control panel). Network-capable for nc data transfer (logical drives). • Safety: siemens safety-integrated (profisafe). • Turret mechanics: hydraulic locking, ac motor with face gearing. Drive power per tool carrier: 10 kw (25 % ed), max. 8,000 rpm. • Tool holder: cylindrical shank d25x48 (din69880) with w-slots for higher repeat accuracy. Driven tools possible in every station (only rotating in working position). • Cooling unit: 13 kw for hydraulics, spindles and control cabinet. Connection for cooling water (20°c ±2°c, 30 l/min, glycol 25 %). • Chip conveyor: hinged belt conveyor (made by knoll) with 180-liter container, discharge height 840 mm. Cooling lubricant system: 750-liter container, 8-bar/20-80-bar pumps. • Bar loader interface: unimag4-compatible (external loaders require specific cover). Maximum bar length: 1,035 mm (short bar operation). Gantry pick-up device: pneumatic gripper (Ø 10-90 mm, max. 3. 5 kg). Conveyor belt with switch for finished parts/remaining parts. Extra Information Control Unit Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Rated power: 54kW Connected load: 65kVA Rated current: 94A Max. back-up fuse: 100A Main Drive Main spindle and counter-spindle Spindle head mounting: OD 140mm, ID 85mm Front bearing diameter: 110mm Torque max. (100%/40%): 125/170 Nm Clamping pressure min./max.: 8/80 bar Piston area pressure: 57cm² Piston area tension: 57cm² Compressive force max.: 45600 N Tensile force max.: 45600 N C-axis: Drive: Hollow shaft motor of the spindle; angle measuring system directly on the spindle Position spread (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Tool carrier 1 Bedjyyuvtjpfx Ab Ijlf X-axis working path: 110mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5000N Z-axis working path: 320mm Z-axis rapid traverse: 50m/min Z-axis acceleration: 9m/s² Z-axis feed force: 5000N Y-axis working path: 100mm Y-axis rapid traverse: 15m/min Y-axis acceleration: 9m/s² Y-axis feed force: 5000N Stations: 14 with cylindrical shank holder D25x48 Tool carrier 2 X-axis working path: 110mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5000N Z-axis working path: 550mm Z-axis rapid traverse: 50m/min Z-axis acceleration: 9m/s² Z-axis feed force: 5000N Y-axis working path: 100mm Y-axis rapid traverse: 15m/min Y-axis acceleration: 9m/s² Y-axis feed force: 5000N Stations: 14 with cylindrical shank holder D25x48 Tool carrier 3 X-axis working path: 180mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5000N Stations: 14 with cylindrical shank holder D25x48

Year of construction: 2010, condition: ready for operation (used), - USED - CNC DOUBLE RAM VERTICAL LATHE MAX ROTATING DIAMETER: 3000 mm MAX TURNING HEIGHT: 800 mm MAX TURNING DIAMETER: 2800 mm Bledpjyyrh Hjfx Ab Ijf SPINDLE: 1-160 rpm; 71-114 kW; 68500 Nm; 2500 mm X-AXIS TRAVEL: -150+1780 mm Z-AXIS TRAVEL: 900 mm RAPID FEEDS X-Z: 8 - 10 m/min TOOL MAGAZINE: BASKET-TYPE ; TYPYE CAPTO C5; 24 POS. POS CONTROL UNIT: SIEMENS 840D MAX ADMITTED LOAD: 15000 Kg WEIGHT: 54000 Kg ACCESSORIES: SWARF CONVEYOR ; AUTOMATIC DOOR ; TOOL SETTER ; HEAD COOLING SYSTEM ; PORTABLE HANDWHEEL

Condition: used, Year of construction: 1998, turning diameter / mm turning length / mm Blodpsyyqthsfx Ab Ief control / Technical Specifications Working Area Max. swing diameter: 540 mm Max. turning diameter: 540 mm Max. turning diameter over ways: 520 mm Max. turning length: 1029 mm Main Spindle Speed range: 35–5,000 rpm Main drive power: 22 kW Max. torque: 349 Nm Spindle nose: A2 – 6 inches Spindle bore: 61 mm Spindle positioning C-axis: 0°–360°/0.001° Tool turret Tool turret type: Single-spindle turret Driven tools Speed range: 15–6,000 rpm Drive power: 7.5 Kw Max. torque: 103 Nm Tool magazine Number of tool positions: 40 Max. tool weight: 7 kg Machine weight: approx. 5700 kg A wide range of accessories included – see photos A backup from 3 September 2012 is available

Condition: used, turning diameter over bed 660 mm turning diameter over slide rest 450 mm turning length 2000- 2880 mm throat Ø 1200 x 880 mm Bjdsyyqd Tjpfx Ab Islf Height of centres 330 mm spindle passage 85 mm turning speed range 10- 700 U/min tail stock MK 5 transmission ratio 24 tool holder Multifix "C" dimensions 3,5/4,4 x 1,45 x 1,1 m weight of the machine ca. 4,2 t konv. lathe with movable bed for long gap. - movable bed 880 mm - swing Ø in gap: Ø 1400 mm - 3- jaw chuck Ø 315 mm - facing plate Ø 800 mm - facing plate Ø 500 mm - rapid travers - some tool holders

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 840 Dsl - Celos, _____ Description: Year of manuf. : 2022 Control : Siemens 840 Dsl - Celos Turning diam. : 140 mm Turning length : 235 mm In General: Year of manufacture:2022 Control system:Siemens 840 Dsl -CELOS Turning diameter:140 mm Turning length:253 mm Bar capacity:50 mm Main spindle: Technology:Motor spindle Speed:7,000 rpm Power:24 kW Torque:100 Nm C-axis:0.001°Chuck Sub spindle: Technology:Motor spindle Speed:7,000 rpm Power:24 kW Torque:100 Nm C-axis:0.001° Bsdsykxmispfx Ab Islf Chuck:Hainbuch clamping top Tool carrier I (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:VDI 25 Tool drive:8,000 rpm X-axis:240 mm Y-axis:70 mm (+/- 35 mm) Z-axis:350 mm Tool carrier II (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:VDI 25 Tool drive:8,000 rpm X-axis:125 mm Y-axis:70 mm (+/- 35 mm) Z-axis:380 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system incl. temperature control Bar loader:Top Automazioni Parts removal:Parts gripper + cycle belt Tailstock:Below counter spindle Chuck:2x Hainbuch clamping top Tool holders:Various driven and static holders

Condition: used, Year of construction: 2007, turning diameter 600 mm Bedpfov Rrq Dsx Ab Iolf swing diameter 680 mm turning height 600 mm z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V frequency 50 Hz control Siemens 840 D pl total power requirement 140 A weight of the machine ca. 18 t dimensions of the machine ca. 6,5 x 3,8 x 4,20 m

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 105 mm, turning diameter: 660 mm, center height: 330 mm, turning length: 2,000 mm, total length: 3,500 mm, total width: 1,400 mm, total height: 1,600 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 36 rpm, overall weight: 3,700 kg, EX-STOCK PROMOTIONAL OFFER! NEW "CE" CERTIFIED. LATHE WITH MECHANICAL CLUTCH Bsdpfx Absyyn Dds Ijlf 3-AXIS DRO AND SEMI-NORTON GEARBOX. EQUIPPED WITH JOYSTICK FOR RAPID FEED ENGAGEMENT. ONE-PIECE CAST IRON BED. Center height: 330 mm Max swing over bed: 660 mm Max swing over carriage: 420 mm Max swing in gap: 870 mm Tool height: 32 mm Distance between centers: 2000 mm Spindle bore: 105 mm Spindle mount: Camlock D1-8 Spindle speeds: (12) 36 ÷ 1600 rpm Longitudinal feeds: 0.063 ÷ 2.52 mm/rev Cross feeds: 0.027 ÷ 1.07 mm/rev Metric threads: (22) 1 ÷ 14 mm Imperial threads: (26) 2 ÷ 28 TPI Tailstock taper: MT 5 Motor: 400 V 50 Hz 7.5 kW Coolant pump: 400 V 50 Hz 90 W Dimensions: 3500 x 1400 x 1600 mm Net weight: 3700 kg INCLUDED IN DELIVERY: 320 mm Ø three-jaw self-centering chuck, reversible jaws 400 mm Ø four-jaw independent chuck 600 mm Ø faceplate Travelling steady Fixed steady Rotating tailstock center MT 5 Thread chasing dial Leadscrew guard Tool post guard Spindle guard Rear splash guard Quick-change tool post type C LED work lamp Cooling system Electro-mechanical foot brake Quick-lock tailstock carriage Carriage gears in oil bath Adjustable leveling pads

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Bledpfxeyyniao Ab Ijf Technical details are shown on picture.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Purchase price EUR 1.550.000 Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Steady rest clamping range: 70-425 mm Turning, drilling, milling head Front diameter: Bearing 110mm Interface HSK100/C8 Bljdpfjyymvljx Ab Ijf Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: ready for operation (used), Year of construction: 2003, operating hours: 232 h, travel distance X-axis: 390 mm, travel distance Z-axis: 780 mm, spindle motor power: 30,000 W, overall weight: 9,000 kg, number of axes: 2, Vertical turning machine manufactured in 2003. This DAEWOO PUMA V550 features an X-axis travel of approximately 390 mm and a Z-axis travel of approximately 780 mm. With a robust machine weight of 9000 kg, it is designed for durability and performance. If you are looking to get high-quality turning capabilities, consider the DAEWOO PUMA V550 machine we have for sale. Contact us for further details regarding this machine. • Electrical supply: AC 380/400 V, 3-phase, PE, 50/60 Hz • Rated power: 54.04 kVA Bodpfxoyymnbe Ab Iolf • Current at full load: 78.01 A • Interrupting current: 9000 A • Electrical schematic version: PV15H688A03 Technical Specification Driven Tools No

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC turning and milling centre with Y-axis, 2 turrets, subspindle and bar feeder. A total of over 44.000,- EUR has been invested in necessary repairs and maintenance over the last 5 years by DMG MORI (replacement of the main spindle S4, ball-screws, etc.). Technical details turning diameter 100 mm turning length 320 / 345 mm control Siemens 840 D swing diameter 145 mm spindle distance 580 mm slide I - cross travel (X1) 220 mm slide I - longitudial travel (Z1) 320 mm y-axis +/- 30 mm rapid traverse (X/Y/Z) 30/15/30 m/min slide II - cross travel (X2) 120 mm slide II - longitudial travel (Z2) 345 mm rapid traverse (X/Z) 30 m/min Travel subspindle (Z3) 380 mm vertical stroke (X3) 145 mm bar material dia. max. 36 mm rapid traverse (X/Z) 20/30 m/min power capacity (40/100 % ED) 26/21 kW spindle turning speed range 40 - 7200 U/min total power requirement 42 kVA weight of the machine ca. 5,3 t Equipment: - SIEMENS 840 D powerline CNC control - Number of controlled axes: 9 - 2 x C-axis - Y-axis in upper turret - Pick-up device with gripper - 2 SAUTER turrets with 12 tool positions (driven), VDI 25 - Tool drive with a speed range of 30 to 6000 rpm - Coolant system with paper band filter - Chip conveyor Bodpfxeyymhze Ab Ielf - Collet chuck on main and subspindle - Bar loading magazine, make: IEMCA BOSS 332 E 32 L, max. bar length 3180 mm

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231167, STAR CNC long-turning lathe SA 16RC, year 2004 CNC control: FANUC 18i-TB Technical data: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 16 mm - Z-axis travel: 140 mm - Spindle speed: 8000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 SUB SPINDLE - Maximum bar diameter: 12 mm - Spindle speed: 8000 rpm - Number of tool stations: 4 Bar feeder: FMB Turbo 2-16 / 3200 / A Bar diameter: 0.8 – 18 mm Bar length: 3200 mm High-pressure system / 2 valves Bedpfx Aeyymirsb Ijlf Operator’s manual included The machine can be inspected under power by prior appointment. Subject to prior sale and technical changes or inaccuracies in the above data!

Condition: used, Year of construction: 2007, functionality: fully functional, 6-spindle Hainbuch Spanntop Axfix D22 Bledsyymbzepfx Ab Iof ARTIS integrated process monitoring system Slide units - Slide unit 1.1: X-axis fixed, Z-axis NC-controlled - Slide unit 2.1: X-axis fixed, Z-axis NC-controlled - Slide unit 1.2: X-axis and Z-axis NC-controlled - Slide unit 2.2: X-axis and Z-axis NC-controlled - Slide unit 3.1: X-axis and Z-axis NC-controlled - Slide unit 3.2: X-axis and Z-axis NC-controlled - Slide unit 4.1: X-axis and Z-axis NC-controlled - Slide unit 4.2: X-axis and Z-axis NC-controlled - Slide unit 5.1: X-axis and Z-axis NC-controlled - Slide unit 5.2: X-axis and Z-axis NC-controlled - Slide unit 6.1: swiveling axis and Z-axis NC-controlled - Slide unit 6.2: X-axis and Z-axis NC-controlled Synchronization device, position 6.1 Part discharge via chute Workpiece conveyor belt at spindle position 6 High-pressure pump Fire extinguishing system Coolant cleaning system Hinged belt chip conveyor Flat loading magazine: IEMCA SIR MS 22/33 P

Condition: excellent (used), Year of construction: 2007, operating hours: 77,264 h, functionality: fully functional, number of spindles: 6, spindle speed (max.): 10,000 rpm, bar diameter (max.): 22 mm, Equipment: rotational speed infinitely variable, 6-spindle machine Part discharge via chute at spindle position 6 Option for polygon turning Collet holders renewed Chip conveyor Magazine IEMCA SIR MS 22 C / 33 P Bsdeyymadopfx Ab Ielf

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C—NEW in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of manufacture: 1992 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feed rates: 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: Bjdpfx Abjyylq Uo Ielf >> 3-axis digital readout by K&C, brand new, 12-month manufacturer’s warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece 3-jaw chuck with 1 set of jaws >> 1 piece 4-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All measuring scales are new and fitted with protective covers to prevent contamination. The carriage movement is smooth and even throughout. Take the opportunity to view this machine under power on site and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C - NEW - Special Light Grey Paint Finish!!! Technical Data: >> Machine no. 92-029 - Year of manufacture: 1992 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop Bjdpfxeyylqhs Ab Islf About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The carriage runs smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Condition: used, Year of construction: 1974, functionality: fully functional, Lead and feed screw lathe Make: Heidenreich & Harbeck Model M530K Blodpfeyyk Raex Ab Ijf Year: 1974 Technical Data Manufacturer: Heidenreich & Harbeck Model: M530K Year of manufacture: 1974 Control: Conventional Centre distance: 2000 mm Swing over bed: 530 mm Swing over cross slide: 280 mm Spindle bore: 70 mm Spindle speed: 9 - 1800 rpm Dimensions (L x W x H): 4.05 x 1.50 x 1.40 m Machine weight: approx. 4 t Equipment - Röhm 3-jaw chuck, D 250 mm - 1 fixed steady rest - Removable gap bed over 400 mm length - 2-axis digital readout - 1 drill chuck - Coolant pump All data subject to change without notice. A powered demonstration is possible at any time in our showroom.