Precision lathe

Pinacho S-90 / 310

Condition: used, turning diameter over bed / mm turning length / mm centre height / mm Bedpezu Dabsfx Acnjll

Condition: used, Year of construction: 2007, x-travel 3.600 mm y-travel 920 mm z-travel 820 mm control iTNC530 Heidenhain B - axis +/- 90 x 1 ° C-axis 360 x 0,001 ° feed X/Y/Z-axis 1 - 20.000 mm/min rapid traverse X-axis 100 m/min rapid traverse Y-axis 60 m/min rapid traverse Z-axis 60 m/min Blodpfx Acoy Sbiksnjl spindle turning speed - stepless 20 - 10.000 U/min tool taper SK50 power capacity at 100 % load 32,00 kW power capacity at 40 % load 48,00 KW max. torque at 40% / 100% load 294 / 196 kW table surface area 4.200 x 900 mm number of T-slots 9 T-slot - distance 100 mm T-slots 1x 18H7 / 8x 18H12 table load capacity - central/maximum 4.200 kg tool magazin: 80 tool diameter 115 mm wotkpiece diameter with 2 vacant positions 160 mm tool length - max. 360 mm weight of tools max. 12,00 kg total power requirement 85,00 kW weight of the machine ca. 32,00 t dimensions of the machine ca. 11,50 x 6,60 x H3,30 m Vertical machining center with HEIDENHAIN iTNC530 control, swivel milling head, partition wall, tool rack magazine with 80 positions, chip conveyor, coolant system, NC-extension table Ø700mm, operating mode 4.

Condition: reconditioned (used), Product information "Voest Alpine DA 160" Voest lead and feed spindle lathe Model DA 160 Condition: Refurbished Technical data Center height: 165 mm Bljdpfjy Ndqrex Acnsl Distance between centers: 650 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 190 mm Bed width: 210 mm Lead spindle diameter: 25 mm Chuck diameter: 160 mm Tailstock spindle: MK 3 Spindle speed (16): 30 - 2500 rpm Motor power: 2 / 2.4 kW Quill stroke: 100 mm Dimensions (L x W x H): 1500 mm x 900 mm x 1650 mm Equipment: - Geometry report - 3-axis digital display, Sino brand - NEW - 3-jaw chuck - Emergency stop button - Quick-change tool holder system Multifix, number of holders 6 - Machine light NEW - Bed stop - Coolant system NEW - Drill chuck with taper shank - Follower point - Lead and feed spindle cover NEW - Chuck guard, limit switch secured - Operating tool - Operating manual - Machine feet

Year of construction: 1958, condition: ready for operation (used), Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement. Bsdpfszdknwox Acnoll

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 20 mm, turning diameter: 180 mm, turning length: 350 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, overall weight: 52 kg, Technical Specifications Parameter Specification Turning length 350 mm Turning diameter 180 mm Spindle taper MT3 Tailstock taper MT2 Chuck diameter 100 mm Spindle bore 20 mm Metric thread range 0.5–2.5 mm Speed range 50–2500 rpm Motor power 0.55 kW Blodoyud H Nepfx Acnel Weight 52 kg Machine dimensions (L × W × H) 810 × 305 × 370 mm Equipment and Free Accessories Set of change gears Chip guard 4-way tool post 3-jaw chuck 100 mm Chuck guard Chuck key Set of Allen keys Set of jaws Dead center Drill chuck Arbor Delivery Delivery to the customer is possible. The transport cost is calculated individually by the shipping company. If you are interested in other machines, we encourage you to visit our website.

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ Bledpfxox D S Eko Acnel • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.

Condition: used, mileage: 272,000 km, fuel type: diesel, axle configuration: 4x2, color: white, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, IVECO 100E22 /P: - 1st registration: 12/2015; - 6-cylinder engine, 220 HP – Euro 6; - approx. 272,000 km; - wheelbase: 4185 mm; - automatic transmission; - retarder (electric brake); - rear air suspension; - GVW: 10,000 kg. Equipment: - air conditioning, electric windows, electrically adjustable mirrors, ABS, pneumatic driver’s seat, cruise control, central locking, battery isolator. Bodywork: - fixed platform body 6.21 x 2.47 m (internal dimensions) with 70 cm high aluminium side panels. The vehicle is available for inspection and test drive at: PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Industrial Zone) 37067 Valeggio sul Mincio (Verona) Tel. +39 045-7950955. Please contact us to schedule an appointment in order to better organize visits to our premises. Bodpfev Ni Ausx Acnsll For further information, technical details, and to find out the sale price of the vehicle, please contact our sales managers directly at +39 045-7950955. Note: The vehicle description is intended as indicative and may contain errors or inaccuracies. Interested parties are required to verify the exact specifications of the vehicle before purchase. PSL Autocarri Srl declines any responsibility for possible errors or inconsistencies in this description. Important: WE WILL ONLY RESPOND TO INFORMATION REQUESTS INCLUDING THE APPLICANT’S FULL NAME AND TELEPHONE NUMBER.

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Model -WL6S Main motor -22kw Bljdpfxjivpttj Acnol

Year of construction: 1978, condition: reconditioned (used), Planer thicknesser 600 mm, planing width 600 mm, planing height 180 mm, 3-knife cutterhead, cutterhead diameter 125 mm. Fully overhauled, technically sound and ready for operation. New electrical system, all required lubrication points present. Cast iron body, weight 890 kg. Foldable tables, table height adjustable. Grease nipples at all necessary locations. Bljdpfxeyablte Acnel

Condition: used, Heizkessel / Boiler Viessmann Paromat-Triplex RN with Ölbrenner / Oil burner -weishaupt- WL40Z-A Baujahr / Year 2015! Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Bsdsxc Ipcjpfx Acnsll