Cycle-controlled lathe

GILDEMEISTER NEF 720

Condition: used, Year of construction: 2003, Technical details: Isdpfx Ajy Tnaxsktotg turning diameter: 720 mm turning length: 2000 mm control: 4110 total power requirement: 40 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 4,5 x 2,3 x 1,9 m turning length: 2000 mm centre height: 345 mm internal taper -metric: 100 mm spindle bore: 92 mm tailstock-quill taper dia.: 100 mm turning diameter over bed: 720 mm

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 150 mm, turning diameter: 1,040 mm, turning diameter over top slide: 690 mm, center height: 500 mm, center width: 2,000 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 380 mm, bar passage: 55 mm, Center height: 500 mm Distance between centers: 2.000 mm Maximum turning diameter: Over cross slide: 690 mm Over bed: 1.040 mm Over gap: 1.070 mm Bed width (hardened guides): 670 mm Gap length: 480 mm Gap length in front of the faceplate: 320 mm CARRIAGE Length of bed guideways: 1.020 mm Cross slide travel: 640 mm Compound slide travel: 360 mm SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size (NN): 200 / 310 / 82 mm Rear bearing size (NNU): 190 / 260 / 69 mm Internal Morse taper reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 ÷ 800 rpm THREADING Total number of threads: 398 Metric threads: 0.5 ÷ 224 mm Module threads: mod. 0.25 ÷ 11 Whitworth threads: 56 ÷ 1/8 TPI Itsdeyhhuwopfx Aktsg Diametral pitch threads: 112 ÷ 1/4 DP FEEDS Number of feeds: 108 Longitudinal, cross and compound feeds: 0.05 ÷ 22.4 mm/rev RAPID TRAVERSES Longitudinal, cross and compound: 2.500 mm/min Longitudinal return: 5.000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 ÷ 500 mm Carriage steady rest capacity: 40 ÷ 350 mm PERMISSIBLE LOAD Cantilever load: approx. 1.500 kg Between centers, without steady rest: approx. 5.000 kg Between centers, with steady rest: approx. 6.000 kg Machine weight: approx. 7.800 kg

Condition: used, Year of construction: 1992, Technical details: x-travel: 800 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: SK 40 control: Philips 532 quill stroke vertical: 80 mm turning speed range: 0-600 und 600-4000 steples U/min feed:: 1 - 3000 mm/min. rapid traverse: 6 m/min table surface area: 1100 x 600 mm table feed: 1 - 3000 /stufenlos mm/min Iedou Nda Ejpfx Aktjtg switched on hours: 82194 h total power requirement: 9,6 (12 kVA) kW weight approx.: 4200 kg dimension machine xH: 2,9 x 2,2 x 2,5 m The machine is located in the technical department. further technical data: - vertical adjustment table (z-axis) 500mm - Headstock throat depth: min./max.: 200 / 750 mm Equipment: -coolant tank with pump -Manual control unit (hand operated) -linear measuring system Heidenhain *

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 600 mm turning diameter over support: 400 mm turning length: 2000 mm center height over support: 300 mm centre distance: 1600 mm revolution per minute: 3 - 2.500 U/min tailstock taper MT: MK 5 spindle bore of work spindle: 62 mm quill stroke: 190 mm longitudinal feeds:: ca.0,001-10 einstellbar mm/U cross feed: ca. 0,001-5 einstellbar mm/U Rapid feed X axis: bis zu 5000 m/min. total power requirement: 40 KVA weight of the machine ca.: 5,6 t Itedpew Rkt Ijfx Akteg dimension machine xH: 4,0 x 2,0 x 1,9 m incl. accessories see picture *

Condition: ready for operation (used), Year of construction: 2001, spindle motor power: 45,000 W, total height: 2,120 mm, overall weight: 11,500 kg, controller manufacturer: SIEMENS, controller model: 810 D, product length (max.): 5,400 mm, number of axes: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it offers a robust main drive with a power of 45/37 kW. Ideal for heavy-duty turning, this machine includes accessories like a lathe chuck, faceplate, and a steady rest. Contact us for more information about this machine. • Working area: • Center distance: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed slide guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 • Turning spindle: • Spindle head DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: • Drive power (60% / 100% ED): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range gear stage 1: 1–280 rpm • Speed range gear stage 2: 4–900 rpm • Tailstock: • Quill diameter: 140 mm • Quill stroke: 300 mm Itodox D Hz Tspfx Aktsg • Quill internal taper: MK 6 • Machine dimensions and weight: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul services: • Hardening and grinding of all bed guides • Grinding of tailstock guides • Overhaul of the complete bed and cross slide assembly (grinding/scraping all guideways) • Renewal of the bed slide's sliding lining • Renewal or relining of the keyways and bottom guides • Renewal of all wipers • Replacement of all belts • Overhaul of the main spindle assembly in the headstock • Renewal of the X-axis including bearings • Renewal of the Z-axis including bearings • Overhaul of the tailstock quill (MK 6 taper regrinding), replacement of spindle and nut • Adjustment of the tooling system • Replacement of the main spindle motor • Checking of the auxiliary motors (X- and Z-axis) • Overhaul of existing safety devices (sliding hood/jaw guard) • Replacement of all rotary, toggle, and limit switches • Replacement of the spindle and handwheel encoder • Replacement of the movable cables and coolant hoses in the work area • Replacement of the central lubrication unit • Renewal of the energy chains • Painting according to specifications (standard textured basalt and light gray) • Assembly and geometric inspection of the machine according to DIN 8605 Additional equipment • 1x used lathe chuck Ø630 mm with various jaws • 1x used faceplate Ø1100 • 1x used steady rest, max. Ø300 • 1x used chip conveyor

Condition: excellent (used), Year of construction: 2011, HURCO TMX8MYS H-TS8034 Year of manufacture: 2011 Iedpfxsxg D A Hs Aktetg

Year of construction: 2016, condition: new, 1 piece reconditioned unused industrial bevel helical gearbox from ASUG. TGL 21815 All parts of the gearbox are renewed, except the housing !!! Claw coupling: 800 mm (only one half available) Maximum torque: 27.829 Nm Itodpfx Akogwlrdotog Gear ratio: i= 1:80 max. power: 51 kW oil filling: 170 kg Speed: n1= 1400 Speed: n2= 17,5 weight: 1450 Kg Shaft diameter d1: 65mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925mm Length from base: 1170 mm !! Gearbox has no oil cooler !

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Itedev N Di Aepfx Aktjg Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: excellent (used), Year of construction: 2001, spindle speed (max.): 10,000 rpm, Vices are not included in the scope of delivery! Itedjxb Dyhspfx Akteg

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Itodpfxeul Svls Akteg Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.