CNC sliding headstock lathe

Maier ML16

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Djdswb Hygepfx Akvskr Delivery: ex works Shipping time: immediately Payment: before pickup Acceptance at our premises Shipping according to your specifications

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II MSY Dkjdpfx Aey S A Riskvjr Max. machining diameter: 280 mm Max. machining length: 400 mm Max. milling speed: 4,500 rpm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm Machine is equipped with: - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck B-206 for main spindle - KITAGAWA 3-jaw chuck B-205 for 2nd spindle - Tool Eye - C-axis - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - 8 units of fixed tool holders - 2 units of powered tool holders

Condition: excellent (used), Continuous rotary table HAU R60 - 1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800mm, 3 polishing units with 7,5 kW each, polishing shaft diameter of 50 mm, width of polishing wheel 2 x max. 400 mm and 1 x 280 mm, diameter of polishing wheel s max. 420 mm, motorized longitudinal and height adjustment of polishing units, machine equipped with liquid compound feeding system More pictures on demand Dkodpfx Aom Nbubokver

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Dkedpsn Tnzfofx Akvsr Model: 62.25 Ras Year 2012 RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Complete with segmented and straight tools

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Dodpfx Aslccvmjkvjkr Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: used, Year of construction: 2007, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor N181 Probe, Machine lamp, Dkodpfx Aowtmg Dekvjr automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dkjdolz Rvlspfx Akver

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 8,000 rpm, number of axes: 9, This 9-axis TRAUB TNL 32 swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 swiss type turning machine. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber-optic PC; color TFT flat-panel display; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), tapping without compensating chuck, parting tool breakage monitoring, parting tool ejection monitoring, axis shutdown, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bore/bar capacity; C-axis max speed 8,000 rpm • Max stroke: 305 mm (L version) / 127 mm (K version) • Sub-spindle: Partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; dual drive Dksdex D Drcspfx Akvor • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter-spindle operation • Measuring/feedback: Glass scales on X-axis (upper and lower turrets); rotary encoder on C-axis • Back working: 8-position back table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal device and counter clamping pressure device on main and counter spindles • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: Connection D 150 mm for central extraction Additional equipment • None specified (no robots, bar feeder, chip conveyor, or external automation listed)

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Dsdpfxom E I D Hs Akvjkr

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Dkjdpfsfxpbmsx Akvjr