Used Doosan Compressor for sale (281)

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, controller model: FANUC Series 31i-MODEL B, TECHNICAL DETAILS Turning length: 1,020 mm Turning diameter: 540 mm Swinging diameter over the machine bed: 750 mm Swinging diameter over the top slide: 540 mm Swinging diameter over the cross slide: 270 mm Travel range X-axis: 565 mm Travel range Y-axis: 170 mm Travel range Z-axis: 1,050 mm Rapid traverse rate X-axis: 36 m/min Rapid traverse rate Y-axis: 26 m/min Rapid traverse rate Z-axis: 36 m/min Power of the spindle motor: 22 W Spindle speed main spindle (max.): 5,000 rpm Spindle bore: 76 mm Spindle speed milling spindle (max.): 12,000 rpm Bar passage: 76 mm Bar diameter (max.): 65 mm Spindle nose: A2#6 Spindle diameter: 110 mm MACHINE DETAILS Hedpfx Agoy Tw Ulo Uon Control system: FANUC Series 31i-MODEL B Chuck outer diameter: 210 mm Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,525 x 2,805 mm Total weight: 12,000 kg Operating hours: 8,977 h EQUIPMENT Documentation/Manual

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, total width: 4,325 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, tool weight: 30,000 g, product length (max.): 8,150 mm, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. • Max. workpiece diameter: 1450 mm • Max. workpiece weight: 2000 kg • Travel (X/Y/Z): 1400 x 1050 x 1200 mm • Pallet size: 800 x 800 mm • Spindle motor power: 22/35 kW • Max. torque: 1732 N·m • B-axis: indexable by degree • Max. tool diameter: 130/320 mm • Max. tool length: 630 mm Additional equipment Hedpszar Aiefx Ag Uen • Belt-type oil skimmer • Triple light tower • Pallet centering device • Shower coolant • Through-spindle coolant 70 bar, 7.5 kW, with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Dimensions Machine Depth 8150 mm Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 828D, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2018. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a powerful 18.5 kW spindle, a table size of 1300 × 570 mm, and a tool changer with 30 positions. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Table size: 1300 × 570 mm • Tool changer: 30 positions • Condition: Very good • Maintenance: Regularly maintained Additional equipment • High-pressure coolant • Renishaw probing system • Chip conveyor • Extraction unit Hedpfx Agjzarpce Uon Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2011, number of axes: 2, This DOOSAN PUMA 2100MS was manufactured in 2011. It features a 65 mm motorized bar passage and a counter-spindle, complete with accessories and an LNS bar loader. Ideal for precision horizontal turning operations. Contact us for more information about this machine. Additional equipment • Motorized bar passage with counter-spindle • Complete with accessories and LNS bar loader Extra Information Hodpszaripefx Ag Ujn Machine still under power

Condition: like new (used), Year of construction: 2022, operating hours: 259 h, turning diameter over cross slide: 790 mm, turning length: 2,124 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 352 mm, travel distance Z-axis: 2,155 mm, spindle motor power: 35 W, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 20 m/min, 2-axis CNC lathe "DOOSAN DNS mod. PUMA 4100LA" with DN Solutions-Fanuc i-Plus iHMI CNC Hjdeqrr Nwepfx Ag Uon

Condition: used, Year of construction: 2009, CNC lathe, 2 axes, DOOSAN LYNX 220LB, year of manufacture 2009 Fanuc i series control Chuck diameter: 210mm Spindle bore: 51mm Max. turning length: 525mm Max. turning diameter: 320mm 12-position tool turret Tool probe Tailstock Part catcher Included with the machine: Hsdpfx Agezai Rwo Uen - Documentation - Chip conveyor with pump - Toolholders located on the turret

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 12,714 h, load capacity: 2,500 kg, lifting height: 4,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,170 mm, power: 34 kW (46.23 HP), drive type: Diesel, Diesel Forklift Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Solid rubber Front tire condition: 60 - 80% Rear tire type: Solid rubber Rear tire condition: 40 - 60% Description: DOOSAN D25S diesel forklift - 2.5 ton lifting capacity - year of manufacture: 2012 - side shifter - TRIPLEX free lift mast - overall height: 2.17 m - lifting height: 4.80 m - 12,714 operating hours according to the meter - forklift with 4-cylinder YANMAR diesel engine, 49 HP - mechanical hydraulic levers - solid rubber tires front approx. 70%, rear approx. 50% - LED work lights front and rear - simple, mechanical forklift - good condition - front loader can be inspected on site - affordable delivery options!! Features: Side shifter, 3rd valve, rear work light, front work light, heating, full cab. Hsdoy U A Ndopfx Ag Uon

Condition: used, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 2,780 h, Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m = Additional options and accessories = Hjdoyn En Uepfx Ag Uen - Rubber tracks

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,600 h, Year of manufacture: 2019 Empty weight: 3.500 kg Hedpsxqfb Eofx Ag Uen Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m = Additional options and accessories = - Rubber tracks

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,800 h, Year of manufacture: 2015 Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Hsdpfx Agsx Hgn Us Uen Engine type: Yanmar Yanmar 4TNV94L

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 465 mm, controller manufacturer: FANUC, controller model: i Series, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DOOSAN VC 3600 was manufactured in 2018. It features an X-axis travel of 520 mm, Y-axis travel of 360 mm, and Z-axis travel of 465 mm. The machine includes a table size of 650 × 375 mm and a load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 3600 vertical machining centre we have for sale. Contact us for further details. • Table Dimensions: 650 × 375 mm • Spindle Power: 5.5 / 7.5 kW • Total Part Count (Pezzi Totali): 114,937 parts • Operating Time (Tempo Lav): 858 h 41 min 59 sec • Cutting Time (Tempo Taglio): 3,329 h 25 min 12 sec • Power On Time (Acceso): 13,604 h 41 min • Cycle Time (Tempo Cic): 0 h 1 min 59 sec Hsdsy Uwzbjpfx Ag Uen • Documentation: Instruction manuals and CE declaration of conformity included Additional equipment • D'Andrea TRM/50 boring head attachment • Gerardi vise (345 × 120 mm) • Chip conveyor system Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 828D, table load: 1,000 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2017. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a powerful 18.5 kW spindle and a table size of 1300 × 570 mm, allowing for efficient machining operations. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Table size: 1300 × 570 mm Hedey Uki Sepfx Ag Ujn • Tool changer: 30 positions • High-pressure cooling • CNC control: Siemens 828D • Condition: Very good; regularly maintained Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs Hsdpfeyugvaox Ag Usn X travel 1630 mm Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor - Coolant unit - Manuals The machine is no more in production but still under power and will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: used, Year of construction: 2007, operating hours: 67,434 h, functionality: fully functional, machine/vehicle number: PT18SY0210, turning length: 300 mm, turning diameter: 230 mm, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 205 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, feed length Z-axis: 350 mm, feed rate Z-axis: 30 m/min, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, overall weight: 8,800 kg, We are offering a high-performance and reliable Doosan TT1800SY CNC turning center, ideal for demanding serial production as well as complex precision machining. Key Features: Dual spindle (main + sub spindle) Y-axis for off-center and complex machining Twin turret system (upper + lower turret) Live tooling capability Full spindle synchronization (simultaneous machining) Hsdpfsy D Rypsx Ag Ujn High productivity with reduced cycle times Technical Specifications: Max. turning diameter: approx. 230 mm Max. turning length: approx. 300 mm Bar capacity: approx. 65 mm Spindle speed (main/sub): up to 5,000 rpm Spindle motor power: ~18.5 kW Y-axis travel: ±50 mm X/Z axis travels: approx. 205 mm / 350 mm Rapid traverse rates: up to 30 m/min Turrets: 2 × 12 stations Live tooling speed: up to 6,000 rpm Tool holders: BMT55 Control system: FANUC 18iTB C-axis: both spindles

Condition: used, Year of construction: 2021, Technical details: rated capacity: 220 kVA Number of working hours: 0 h type of fuel: Diesel revolutions per minute of the motor:: 1500 rpm output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m The generator is soundproofed. - NEW -New Diesel engine: -6-cylinder -type P086TI -with battery 2x 12Volt 90 Ah Generator: -alternating current -400Volt / 50Hz -current 318 A -speed 1500 rpm Hodpju U E Edefx Ag Usn -protection class IP23 -Isolation class H *

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm Hjdpsq Nqkxsfx Ag Ujn MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: excellent (used), Year of construction: 2018, operating hours: 10,500 h, functionality: fully functional, 2 same machines for sale. Hedpfsy Udbnsx Ag Uon X / Y / Z - 1020/ 540 / 510 mm Table 1300 x 610 mm Max. table loading 650 kg Spindle revolutions 8 000 rpm Machine dimensions 3200 x 2500 x 2500 mm Machine weight 6 500 kg

Condition: like new (used), Year of construction: 2019, DOOSAN PUMA GT 2100 B LATHE Hsdpfxjzak Dxs Ag Uon YEAR OF FIRST INSTALLATION: 2019 CHUCK DIAMETER: 250 mm SWING OVER BED: 600 mm SWING OVER CROSS SLIDE: 390 mm RECOMMENDED TURNING DIAMETER: 255 mm MAXIMUM TURNING DIAMETER: 390 mm MAXIMUM TURNING LENGTH: 550 mm BAR WORK DIAMETER: 81 mm SPINDLE SPEED: 3,500 RPM SPINDLE NOSE: ASA 8 TURRET: 10 POSITIONS TRAVELS: X: 230 mm Z: 580 mm WEIGHT: 3,600 kg

Condition: ready for operation (used), Year of construction: 2011, operating hours: 953 h, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 22,000 W, controller manufacturer: FANUC, controller model: i-series, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2011. This DOOSAN Puma 2600L features a maximum turning diameter of 481 mm and a turning length of 1,280 to 1,310 mm, depending on the chuck. It includes a robust spindle speed of up to 2,800 RPM and a tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600L machine we have for sale. Contact us for further details. • Capacity & Reach • Maximum turning diameter: ø 481 mm • Maximum turning length: 1,280–1,310 mm (depending on the chuck) • Turning diameter above the bed: ø 780 mm • Bar bore/capacity: ø 76 mm • Main Spindle • Chuck (jack plate) diameter: 254 mm (10 inch) • Spindle bore: ø 86 mm • Spindle nose: A2-8 • Tool Changer • Turret: 12 stations • Rapid traverse (X/Z): 30 m/min Additional equipment • Note: Tools are excluded (can be purchased for an additional amount) Technical Specification Hodpfx Agjy T Ndfj Uen Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 762 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis DOOSAN DNM 400 II was manufactured in 2014. It features an X-axis travel of 762 mm, Y-axis travel of 435 mm, and Z-axis travel of 510 mm. The machine includes a worktable with dimensions of 920 mm x 435 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 400 II vertical machining centre we have for sale. Contact us for further details. • Capacity and travels: • Spindle nose to table: 150–660 mm • Worktable: Hodpfxoy T I Sno Ag Uon • Size: 920 x 435 mm (36.2" x 17.1") • Spindle: • Max torque: 117 N·m (86.3 ft-lbs) • Taper: BIG-PLUS Dual Contact #40 (BT40 / CAT40) • Cooling: Through-spindle coolant (included) • Automatic Tool Changer (ATC): • Capacity: 30 tools (cam-type double arm) • Tool-to-tool time: 1.3 s • Max tool length: 300 mm • Feed rates and motion: • Rapid traverse (X/Y): 36 m/min (1,417 IPM) • Rapid traverse (Z): 30 m/min (1,181 IPM) • Max cutting feedrate: 10,000 mm/min Additional equipment • Workpiece clamps, tools, and toolholders available at additional cost (not included) Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,896 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, total height: 1,700 mm, total width: 1,628 mm, overall weight: 3,600 kg, controller manufacturer: FANUC, controller model: i-series, product length (max.): 2,834 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 2100M was manufactured in 2017. It features a maximum turning diameter of 300 mm and a turning length of 513 mm. The machine is equipped with 12 tool stations and offers rapid traverse speeds of 24 m/min in the X-axis and 30 m/min in the Z-axis. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 2100M horizontal turning machine we have for sale. Contact us for further details. • Swing over bed: 600 mm • Swing over saddle: 390 mm • Recommended turning diameter: 210 mm • Max. turning diameter: 300 mm • Max. turning length: 513 mm • Bar working diameter: 65 mm Hedpfjy Tx S Sjx Ag Usn • Spindle nose: ASA A2-6 • Spindle bearing diameter (front): 110 mm • Spindle through-hole diameter: 76 mm • Minimum spindle indexing angle (C-axis): 0.001° • Number of tool stations: 12 • OD tool size: 25 mm • Boring bar diameter: 40 mm • Indexing time (1st swivel time): 0.15 s • Rotary tool spindle speed: 5,000 rpm • Rapid traverse (X-axis): 24 m/min • Rapid traverse (Z-axis): 30 m/min • Quill diameter: 80 mm • Quill bore taper (live): MT4 • Quill travel: 80 mm • Electric power supply: 30.43 kVA Additional equipment • None specified (no robots, automation or bar feeder listed) • Tools excluded; available at additional cost Technical Specification Driven Tools Yes Counter Spindle No

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Hedpsy St Sdjfx Ag Ujn Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 670 mm, feed length Z-axis: 625 mm, nominal power (apparent): 37 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 1,000 kg, total height: 2,815 mm, total length: 3,350 mm, total width: 3,760 mm, table width: 650 mm, table length: 1,300 mm, table load: 1,000 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 650 Vertical Machining Centre – 2011 Fanuc i-Series Control | 12,000 RPM | 4th Axis Ready 2011 Doosan DNM 650 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle, rebuilt spindle, 4th axis ready, 30-tool ATC, TSC, chiller & swarf conveyor. Available from Used Machine Tools Ireland. Manufacturer: Doosan Model: DNM 650 Machine Type: 3 Axis Vertical Machining Centre with 4th Axis preparation Year: 2011 Control: Fanuc i Series Condition: Very Good - spindle rebuilt in 2026 Availability: March 2026 We are pleased to offer this 2011 Doosan DNM 650 Vertical Machining Centre, a highly regarded and extremely rigid VMC, ideal for precision subcontract machining, toolmaking, and production environments. This machine is equipped with a Fanuc i-Series control and benefits from a newly rebuilt spindle, ensuring excellent performance, reliability, and long service life. The machine is prepared for a 4th axis with Nikken interface, making it an ideal platform for future rotary or multi-axis work. Key Specifications Manufacturer: Doosan Model: DNM 650 Year: 2011 Control: Fanuc i-Series Spindle Speed: 12,000 RPM Tool Taper: BT 40 X / Y / Z Travels: 1270 / 670 / 625 mm Table Size: 1300 × 650 mm Maximum Table Load: 1000 kg Rapid Traverse Rates: X / Y: 36 m/min Z: 30 m/min ATC: 30 Places Max Tool Diameter: Ø80 mm with adjacent tools / Ø125 mm without Max Tool Length: 300mm Max Tool Weight: 8 kg Machine Dimensions (Approx): 2760 x 3350 x 2815mm Machine Weight (Approx): 8500kg Features & Equipment Newly rebuilt spindle Nikken 4th Axis preparation 30-station Automatic Tool Changer (ATC) 20 bar through-spindle coolant (TSC) Coolant chiller LNS swarf conveyor Data server / networking capability Fully enclosed, heavy-duty construction Please Note Hedpfxjyfh Ixe Ag Uon No tool holders, vices, or swarf bin included Ideal For Precision engineering CNC subcontract machining Automotive & aerospace components General and high-speed milling applications The Doosan DNM 650 is known for its exceptional rigidity, accuracy, and reliability, making it one of the most popular vertical machining centres in its class. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Hodpfxsv Iq Ezj Ag Ujn Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,020 mm, feed length Y-axis: 540 mm, feed length Z-axis: 510 mm, nominal power (apparent): 33 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 800 kg, total height: 2,700 mm, total length: 3,750 mm, total width: 2,285 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 500 Vertical Machining Centre – 2012 Fanuc i-Series Control | 12,000 RPM | BT40 | Spindle Rebuilt 2024 2012 Doosan DNM 500 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle (rebuilt 2024), 1200×540 mm table, 30-tool ATC, 20 bar TSC & data server. Available now. Manufacturer: Doosan Model: DNM 500 Machine Type: 3 Axis Machining Centre Control: Fanuc i Series Control Year: 2012 Condition: Very Good - spindle rebuilt in 2024 We are pleased to offer this 2012 Doosan DNM 500 Vertical Machining Centre, a robust and highly accurate CNC milling machine designed for precision engineering, subcontract machining, and production environments. Equipped with a Fanuc i-Series CNC control and a 12,000 RPM BT40 spindle, this machine delivers excellent cutting performance across a wide range of materials. The spindle was professionally rebuilt in 2024, ensuring reliability, accuracy, and long-term service life. Key Specifications Manufacturer: Doosan Model: DNM 500 Year: 2012 Control: Fanuc i-Series CNC Axis Travels X Axis: 1020 mm Y Axis: 540 mm Z Axis: 510 mm Table Table Size: 1200 × 540 mm Maximum Table Load: 800 kg Spindle Spindle Speed: 12,000 RPM Spindle Taper: BT40 Spindle Motor Power: 15 kW Spindle Condition: Rebuilt in 2024 Toolchanger Automatic Tool Changer: 30 Tool Stations Machine Dimensions & Weight Overall Length: 3750 mm Overall Width: 2284 mm Overall Height: 2703 mm Machine Weight: 6,500 kg Hjdpfx Ajyfh H Ueg Uen Features & Equipment Fanuc i-Series CNC control 30-station Automatic Tool Changer (ATC) 20 bar Through-Spindle Coolant (TSC) Data server / networking capability Fully enclosed, rigid Doosan construction Ideal footprint for busy workshops Please Note No swarf bin included No tool holders included No vices included Ideal Applications Precision CNC milling Subcontract machining Automotive, aerospace & general engineering Small to medium batch production The Doosan DNM 500 is renowned for its rigidity, accuracy, and reliability, making it a proven and popular choice for machine shops seeking dependable CNC performance. Notes: *Specifications are given in good faith but not guaranteed*