Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. Dwedpfx Aex D U Alsb Tjf 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws

Condition: excellent (used), Year of construction: 2019, 256mm maximum cutting diameter, Djdpfx Aex D Uy Rjb Tswf 458mm max turned length, 4,800rpm spindle speed, 51mm bar capacity, 12 station VDI turret, 16kW spindle motor, Hurco WinMax 5 Control, tailstock, tool setter, swarf conveyor

Condition: ready for operation (used), Year of construction: 2001, Control Unit Brand FANUC Dedex D Hgpepfx Ab Towf Model Series 21i-T This HARDINGE EMAG VL 5 was manufactured in 2001. It features a Fanuc Series 21i-T control, a chuck diameter of 260 mm, and a maximum turning diameter of 220 mm. The spindle can reach speeds up to 4,500 rpm, and it includes a 12-piece automatic tool changer. Ideal for precise vertical turning operations. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 1991, Technical details: turning diameter over bed: 570 mm turning diameter over slide rest: 365 mm turning length: 2000 mm feed per revolution: 0,06 - / 0,03 - 28 mm spindle turning speed range: 11,2 - 2240 U/min spindle bore: 62 mm spindle head: 8 nach DIN 55022 total power requirement: 15 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 4,5 x 1,5 x 1,4 m Dedex D Ufmjpfx Ab Tswf with digital readout HEIDENHAIN rapid feed, MULTIFIX toolholder system fixed steady dia. 160 mm 3 jaw chuck RÖHM TR 250 coolant attachment diverse toolholders, diverse jaws *

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at Dwsdjx D Uz Ijpfx Ab Tef the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Year of construction: 2001, condition: ready for operation (used), General Data Dwodpox D I Izefx Ab Tof Measurements width 1950 mm Measurements depth 3860 mm Measurements height 1905 mm Machine weight 5550 kg Control Unit Brand FANUC Model 21iT Main Drive Spindle speed range 50–4200 Spindle motor power 15 kW Movement X-Axis Movement 189 mm Workpiece Workpiece drm over bed 520 mm Additional Equipment High-speed tailstock Parts catcher Bar feed interface This HARDINGE Quest 51 SP was manufactured in 2001. It features a swing over bed of 520 mm, a maximum turning diameter of 356 mm, and a spindle speed up to 4200 RPM. The machine includes a 12-station live tooling turret with integrated C-axis and Y-axis for multi-axis machining. Control is managed via a 21iT CNC system. Consider the opportunity to buy this HARDINGE Quest 51 SP horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 1999, condition: ready for operation (used), General Data Measurements width 1535 mm Measurements depth 2630 mm Measurements height 1800 mm Machine weight 3550 kg Main Drive Spindle speed range 35–3500 Spindle motor power 11 / 15 kW Movement X-Axis Movement 175 + 25 mm X-Axis Rapid Traverse 24000 mm/min Z-Axis Movement 380 mm Z-Axis Rapid Traverse 24000 mm/min Workpiece Workpiece drm over bed 560 mm Workpiece drm over support 350 mm Additional Equipment Coolant tank capacity: 100 L This Feeler FTC 20 was manufactured in 1999. It features a swing over bed of 560 mm and a maximum turning diameter of 350 mm. The spindle operates at speeds up to 3500 rpm, supported by a robust 15 kW motor. Ideal for precision turning with its 8 tool stations and manual tailstock. Consider the opportunity to buy this Feeler FTC 20 horizontal turning machine. Contact us for more information about this machine. Application Types Turning Djdpfxox D Nrns Ab Tswf

Condition: ready for operation (used), Year of construction: 2006, operating hours: 20,695 h, Control Unit Brand MAZATROL Model Matrix Movement X-Axis Movement 630 Y-Axis Movement 230 Z-Axis Movement 1585 W-Axis Movement 1546 Additional Equipment Options Screen: Picture available Dodpfex D Szrjx Ab Tswf This 5-axis Mazak Integrex 400 IV was manufactured in 2006. It features a Mazatrol Matrix control, a 12-inch chuck, and a steady rest supporting 70-230mm. The machine offers a milling spindle speed of 12000rpm and a turning spindle speed of 2800rpm. If you are looking to get high-quality turn-mill capabilities, consider the Mazak Integrex 400 IV machine we have for sale. Contact us for more information about this machine. Application Types Turning

Year of construction: 2022, operating hours: 119 h, condition: ready for operation (used), Control Unit Brand HAAS Model NGC Dsdpox D Ik Njfx Ab Tewf Main Drive Number of axis 3 Spindle Speed 4000 RPM Spindle motor power 14.9 kW Movement X-Axis Movement 213 mm Z-Axis Movement 571 mm Y-Axis Movement 50 mm Technical Specification Driven Tools yes This 3-axis HAAS ST-20Y was manufactured in 2022, featuring X-axis travel of 213 mm, Y-axis travel of ±50 mm, and Z-axis travel of 571 mm. It includes a spindle bore of 64 mm and a three-jaw chuck diameter of 210 mm. The machine offers a maximum spindle speed of 4000 rpm and comes equipped with a chip conveyor, tool measuring probe, and a hydraulic tailstock. Consider the opportunity to buy this HAAS ST-20Y horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2002, condition: ready for operation (used), General Data Measurements height 2200 mm Main Drive Spindle Speed 1200 RPM Spindle motor power 9 kW Control Unit Brand SIEMENS Dimensions Machine Length 4660 mm This WAGNER FCL 3280 was manufactured in 2002. It features a spindle bore of 134 mm and a spindle speed range up to 1200 rpm. The machine supports a maximum workpiece weight of 1800 kg with tailstock and steady rest. It offers rapid traverse rates of 10,000 mm/min for both Z and X axes. If you are looking to get high-quality turning capabilities, consider the WAGNER FCL 3280 machine we have for sale. Contact us for more information. Dedsx D Dpnjpfx Ab Tewf Application Types Turning

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 3480 kg Measurements height 1693 mm Main Drive Spindle Speed 6000 RPM Spindle motor power 15 kW Number of axis 2 Control Unit Brand SIEMENS Model SINUMERIK 828D Technical Specification Driven Tools yes Dimensions Machine Length 2540 mm Movement X-Axis Movement 205 mm Z-Axis Movement 560 mm This DOOSAN LYNX 2100LMA was manufactured in 2019. It features a 6-inch chuck, a maximum turning diameter of 300 mm, and a length of 510 mm. The machine offers rapid traverses of 30 m/min in the X-axis and 36 m/min in the Z-axis, with a spindle speed up to 6000 rpm. Ideal for precision turning, it also includes a 12-station turret. Contact us for more information about this machine. Application Types Dodpfxex D Dp Ie Ab Tewf Turning

Year of construction: 2020, operating hours: 2 h, condition: ready for operation (used), Control Unit Brand FANUC Model Series Oi-TF General Data Machine weight 20000 kg Main Drive Spindle speed range 1800 rpm Spindle motor power 30 / 37 kW Spindle bore 132 mm Tool taper MT5 (built-in) Number of axis 2 Movement X-Axis Movement 350 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 3130 mm Z-Axis Rapid Traverse 10 m/min Workpiece Workpiece drm over bed 775 mm Workpiece drm over support 630 mm Turret Number of turrets 1 Tail Stock Pinol diameter 160 mm Tools Number of station 1 Djdpfxjx D Ic Sj Ab Tswf Additional Equipment Electric Power Supply Required: 59 / 220 kVA This SMEC SL 4500 L was manufactured in 2020. It features an 18" chuck, a maximum turning diameter of 690 mm, and a machining length of 3,055 mm. The spindle supports speeds up to 1,800 rpm with a motor power of 30/37 kW. It includes a 12 station turret and a tailstock with a MT5 taper. Consider the opportunity to buy this SMEC SL 4500 L horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2019, operating hours: 3,728 h, condition: ready for operation (used), Control Unit Brand HAAS Dsdpfx Absx D Hn Tj Tewf Model NGC Main Drive Spindle Speed 4000 RPM Spindle bore 88.9 mm Number of axis 4 Spindle motor power 149 kW Movement C-Axis Movement 360 º X-Axis Movement 213 mm Z-Axis Movement 572 mm Y-Axis Movement 51 mm Tools Slots in storage 12 Technical Specification Max. Bar Diameter 64 mm Driven Tools yes This HAAS ST-20Y lathe, manufactured in 2019, features a Y-axis, tailstock, automatic tool probe, and chip conveyor. With a spindle speed of up to 4000 rpm and driven tools supported by a C-axis, it offers strong capabilities for complex machining. If you are looking for a high-quality turning solution, consider the HAAS ST-20Y we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 3850 kg Measurements height 1921 mm Control Unit Brand SIEMENS Model SINUMERIK 828D Dwsdpfsx D Dkrox Ab Tjf Dimensions Machine Length 2880 mm Main Drive Number of axis 3 Spindle Speed 6000 RPM Spindle motor power 15 kW Movement X-Axis Movement 205 mm Z-Axis Movement 560 mm Y-Axis Movement 105 mm Technical Specification Driven Tools yes This 3-axis DOOSAN LYNX 2100LYA was manufactured in 2020, featuring a chuck size of 6 inches, a maximum turning diameter of 300 mm, and a length of 510 mm. It boasts rapid traverses of 30 m/min on the X-axis and 36 m/min on the Z-axis, with a high spindle speed up to 6000 rpm. Consider the opportunity to buy this DOOSAN LYNX 2100LYA horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2021, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 3400 mm Measurements height 2100 mm Machine weight 5000 kg Control Unit Brand SIEMENS Model SINUMERIK 8287D Dsdpfxox D Nuvs Ab Tswf Main Drive Spindle speed range 20 – 2200 Spindle motor power 15 kW Spindle bore 81 mm Number of axis 2 Movement X-Axis Movement 280 mm Z-Axis Movement 1435 mm Workpiece Workpiece drm over bed 500 mm Workpiece drm over support 260 mm Tail Stock Pinol diameter 75 mm Pinol tool taper MK 5 This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us. Application Types Turning

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Dedpjx D D D Sjfx Ab Tswf Model Series 3i-B Main Drive Number of spindles 2 Spindle speed range 3000 Number of axis 5 Movement Y-Axis Movement 300 mm This 5-axis DOOSAN SMX 3100 was manufactured in 2014, featuring a multi-tasking turning center with high rigidity and precision. It offers a maximum turning diameter of 660 mm and a length of 1540 mm. The machine includes a Y-axis stroke of 300 mm and a B-axis rotation of ±120°. It supports a main spindle speed up to 3000 rpm and a milling spindle speed up to 12,000 rpm. If you are looking to get high quality turning capabilities consider the DOOSAN SMX 3100 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2010, condition: ready for operation (used), Control Unit Dwedpfx Aox D Hcdsb Tsf Brand HEIDENHAIN Model MANUAL plus 4110 Movement X-Axis Movement 285 mm Z-Axis Movement 890 mm Main Drive Number of axis 2 Spindle Speed 3000 RPM This MAS MASTURN 550 was manufactured in 2010. It features a swing over bed of 550 mm and a maximum turning diameter of 500 mm. The spindle supports a speed range up to 3000 rpm, and it's equipped with a HEIDENHAIN MANUAL plus 4110 control system. If you are looking to get high quality turning capabilities consider the MAS MASTURN 550 machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2014, General Data Dwjdpfjx D Eu Eex Ab Tef Measurements width 1500 mm Measurements depth 3900 mm Measurements height 3200 mm Machine weight 7000 kg Control Unit Model SINUMERIK 840Dsl Brand SIEMENS Main Drive Spindle speed range 4500 rpm Spindle motor power 18kW at 100% duty cycle, 28kW at 40% duty cycle Tool taper DIN 55026 - A6 Number of axis 2 Movement X-Axis Movement 745mm X-Axis Rapid Traverse 60m/min Z-Axis Movement 300mm Z-Axis Rapid Traverse 30m/min Media Chip conveyor Yes Internal cooling Yes Additional Equipment Coolant tank capacity: 360 liters This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with up to 28kW power at 40% duty cycle and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us. Application Types Turning

Condition: ready for operation (used), Year of construction: 2005, Main Drive Djdpfx Abjx D Ng Es Tewf Number of spindles 1 Spindle speed range 4000 Spindle motor power 22/15 kW Tool taper VDI 40 Number of axis 2 Movement X-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm 280 mm Workpiece X 320 mm Tools Number of index 12 This Okuma LVT 300 was manufactured in 2005. A robust vertical turning machine featuring a max. turning diameter of 280 mm and a swing diameter of 320 mm. It offers a rapid traverse rate of 60 m/min on the X-axis and 30 m/min on the Z-axis, with a turning speed range up to 4000 U/min. Ideal for efficient, precise operations, the machine includes 12 tool positions. A great opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. Application Types Turning

Year of construction: 2020, operating hours: 6,056 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D General Data Measurements width 3150 Measurements depth 5564 mm Measurements height 2135 mm Machine weight 10000 kg Main Drive Dwodpfx Absx D Iv Eo Tsf Spindle speed range 3600 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 22.5 m/min Z-Axis Rapid Traverse 33 m/min Workpiece Workpiece drm over bed 800 mm Workpiece drm 600 mm Tools Slots in storage 12 This 3-axis horizontal turning machine manufactured in 2020 features a Siemens 840D control and a spindle speed up to 3,600 rpm. It offers a max turning diameter of 600 mm and a length of 2000 mm. Equipped with a chip conveyor, Siemens CELOS control system, and a fume extraction system, it's ideal for complex machining tasks. Consider the opportunity to buy this DMG MORI CTX 2000 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2019, operating hours: 3,934 h, condition: ready for operation (used), Control Unit Brand HAAS Model NGC Main Drive Spindle speed range 4000 Spindle motor power 14.9 kW14.9 kW Movement Dedpfjx D Nxhsx Ab Tswf X-Axis Movement 213 mm Y-Axis Movement ±51 mm Z-Axis Movement 572 mm Media Chip conveyor Yes Additional Equipment ATP – Automatic tool probe Install Kit – Bar feeder installation kit with adapters for bar diameters 9–44 mm / Programmable, pneumatically operated finished part catcher (max. part dimensions: 108 mm x 54 mm, max. weight: 2.27 kg) CONVEYOR – Chip conveyor (belt type) LINER ADAPTER 2.00 – Haas liner adapter for spindle with bar diameter 2" (51 mm) HAAS Bar Feeder – Compatible with HAAS lathes (ST-10 to ST-35), for automatic bar feeding LT-6K-UP – Option to increase the speed of driven tools up to 6000 rpm PCAT – Pneumatic part catcher, programmable, for parts up to 96 mm x 152 mm PTS – Hydraulic tailstock This 3-axis HAAS ST-20Y was manufactured in 2019. A robust horizontal turning machine, it offers reliable performance for precision machining. Consider the opportunity to buy this HAAS ST-20Y horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 2000 Measurements depth 5100 mm Measurements height 2100 mm Machine weight 7000 kg Main Drive Spindle speed range 2800 Spindle motor power 30 kW Spindle bore 111 mm Movement X-Axis Movement 255 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 1315 mm Z-Axis Rapid Traverse 24 m/min Dwjdpsx D Ir Hefx Ab Tjf Workpiece Workpiece drm 490 mm Workpiece X 1315 mm This Biglia Smart Turn 1200 was manufactured in 2008. A robust horizontal turning machine with a bar capacity of 92 mm and a maximum machining diameter of 490 mm. It features a spindle bore of 111 mm and a chuck diameter of 315 mm, powered by a 30 kW motor. Ideal for handling substantial workpieces, the machine we have for sale weighs 7000 kg. For more information about this horizontal turning machine, please reach out to us. Application Types Turning

Year of construction: 2005, operating hours: 15,731 h, condition: ready for operation (used), Control Unit Brand FANUC Model Series 0i Mate-TB General Data Machine weight 3400 kg Movement Dodox D H Tvepfx Ab Tjwf X-Axis Movement 176 mm Z-Axis Movement 520 mm Main Drive Spindle Speed 4500 RPM Spindle motor power 11 kW This Dugard Eagle 200 was manufactured in 2005. A robust horizontal turning machine featuring a maximum turning diameter of 280 mm and length of 508 mm. It includes a main spindle bore of ø62 mm and a bar capacity of ø52 mm. The spindle operates at speeds up to 4500 rpm, supported by a FANUC motor. Ideal for precise turning operations. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2017, operating hours: 25,919 h, General Data Measurements width 1850 mm Measurements depth 2470 mm Measurements height 1930 mm Machine weight 6000 kg Control Unit Brand FANUC Model Series 0i-TF Movement X-Axis Rapid Traverse 24 m/min Y-Axis Rapid Traverse 12 m/min Z-Axis Rapid Traverse 27 m/min X-Axis Movement 221 mm Z-Axis Movement 400 mm This 4-axis TSUGAMI M08SYE-II turn-mill centre was manufactured in 2017. It features a maximum machinable diameter of 280 mm, a machining length of 380 mm, and dual spindle speeds up to 4500 rpm. Equipped with a 12-station turret and a robot for part feeding, it offers efficient processing capabilities. Consider the opportunity to buy this TSUGAMI M08SYE-II turn-mill centre. Contact us for more information about this machine. Dwedpfx Abjx D Nq Dj Tef Application Types Turning

Condition: ready for operation (used), Year of construction: 2018, operating hours: 958 h, General Data Measurements width 1240 mm Measurements depth 2120 mm Measurements height 1750 mm Machine weight 2300 kg Control Unit Brand CINCOM Main Drive Number of spindles 2 Spindle speed range 10000 Spindle motor power 37 kW Number of axis 6 Dodpfx Asx D S Ixob Tjwf Additional Equipment Bar feeder with magazine for bars up to 3 m Diameter range: 2–20 mm Automatic bar change system Other accessories This 6-axis Citizen Cincom A20 was manufactured in 2018 and features a main spindle with a maximum bar diameter of 20 mm and a speed range up to 10,000 rpm. It includes a sub spindle and driven tools with a tool system supporting up to 21 tools. The machine offers rapid traverse rates up to 32 m/min and comes with an LNS Express 220 bar feeder. Consider the opportunity to buy this Citizen Cincom A20 swiss type turning machine. Contact us for more information. Application Types Turning