Used Mazak Integrex 400 Iv for sale (321)

Year of construction: 2011, operating hours: 45,000 h, condition: good (used), functionality: fully functional, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 805 mm, spindle diameter: 150 mm, spindle bore: 51 mm, spindle speed (max.): 5,000 rpm, MAZAK INTEGREX 100 IV ST multitasking center Year 2011 Control unit: Matrix Maximum workable length: 753 mm Maximum workable diameter: 545 mm Bar diameter: 51 mm Main spindle diameter: 200 mm, 2-jaw chuck Main spindle power and speed: 11 KW, 5000 rpm C-axis: 360° Counter-spindle diameter: 200 mm, 2-jaw chuck, self-centering Counter-spindle power and speed: 11 KW, 5000 rpm C-axis on counter-spindle: 555 X-axis travel: 410 Y-axis travel: 140 Z-axis travel: 805 B-axis travel: 225° Milling spindle power: 5.5 KW Fpjdpszz Rxwofx Ak Uol Milling spindle speed: 12,000 rpm Spindle mounting: CAPTO C6 Maximum tool storage capacity: 40 tools Lower turret: 9 positions, CAPTO High-pressure system through the spindle: 20 BAR Chip conveyor: belt type Automatic door Robot interface

Condition: good (used), Year of construction: 2004, TURNING AND MILLING CENTER MAZAK INTEGREX 200 IV ST THE MACHINE IS IN GOOD CONDITION, VISIBLE AT OUR WAREHOUSE IN VILLORBA 20 TOOLS AND HIGH PRESSURE SYSTEM 20 BAR Producer MAZAK Model INTEGREX 200 IV S Year 2007 Used condition Location Treviso, Italy Price Category Multitasking Machines Subcategories Stock number 633 Serial number 216700 Matrix governing unit Maximum workable length 1050 mm Maximum workable diameter 660 Fpodpfx Akoiz Tmgo Usl Bar passage 51 Main spindle diameter 210 Main spindle power and revolutions 22 KW 5000 rpm C axis 360° Counter spindle chuck diameter 210 Counterspindle power and revolutions 18.5 KW 5000 Rpm C axis on the 555 counter spindle X-axis (travel) 580 Y axis (strokes) 160 Z axis (strokes) 1050 B axis (strokes) 225° Milling spindle power 18.5 kW Milling spindle speed 12,000 rpm CAPTO C6 spindle mount Maximum warehouse capacity 20 UT High pressure system through the spindle 20 BAR Chip conveyor Si carpet

Condition: used, Year of construction: 2007, MAZAK TURNING CENTRE TYPE INTEGREX 200 IV S - 1000 mm The machine is supplied in standard configuration and equipped with the following options: - Through‑spindle coolant 15 bar - Synchronized tapping with milling spindle - Cylindrical interpolation and polar coordinates - 40‑tool magazine Capto C6 - Preparation for visual tool (visual tool probe) - Form/geometry compensation for rotary axes - 3D coordinate conversion - Management of rapid traverses - Preparation for flash tool (tool‑change flash tooling) - Simultaneous 5‑axis functions - Tool pivot point management - 5‑axis tool radius compensation - Part catcher (automatic part collector) - Double clamp pressure on the secondary spindle - Overload detector Maximum swing 660mm Swing over cross slide 660mm Fodpozuy Tdofx Ak Uspl Swing during Y-axis process 660 to 500mm Maximum machining diameter 660mm Through-hole diameter 76mm

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 61 [mm] - Max. turning diameter : 400 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-6 - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - C axis indexing precision : 0.001 [°] - Travel : 795 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 410/805 [mm] - Y stroke : 140 [mm] - B Axis stroke : 225 [°] - B axis indexing precision : 0.001 [°] - Tool type : CAT 40 Fsdpfx Akouhal Se Uspl - Spindle speeds : 12000 [rpm] - Spindle power : 6.6 [kW] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 20 LOWER TURRET - Number of positions : 9 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3075 X 2330 [mm] - Machine height : 2450 [mm] - Machine weight : 7500 [kg] MACHINE HOURS - Number of hours under power : 75434 [h] - Number of working hours : 49153 [h] EQUIPMENT - CNC : Mazatrol MATRIX - Interactive programming - 3 colors status lamp - Coolant tank * Coolant through spindle - Chips conveyor - Oil mist extractor : ELBARON - Tool probe - Tool breakage detection - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD - Electric transformer

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning diameter: 545 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, Equipment: chip conveyor, The MAZAK Integrex 100-IV is a compact and highly precise CNC turning and milling center designed for complete machining of complex workpieces in a single setup. Thanks to the combination of turning and milling functions, as well as the integrated B and Y axes, the machine is particularly suitable for demanding precision parts in the medical technology, mechanical engineering, and precision engineering industries. The machine was manufactured in 2007 and is equipped with the powerful MAZATROL Matrix control. This enables both dialog-oriented and ISO programming and offers modern functions for efficient and productive manufacturing. Key technical data: The travels are 410 mm in the X-axis, 140 mm in the Y-axis (±70 mm), and 570 mm in the Z-axis. The B-axis has a swivel range of 225°, enabling complex 5-axis machining. The C-axis of the main spindle operates with a high positioning accuracy of 0.001°. The maximum turning and swing diameter is 545 mm each. The main spindle reaches speeds of up to 6,000 rpm with a power of approximately 11 kW, which enables dynamic and precise turning operations. The integrated milling spindle operates with speeds of up to 12,000 rpm with a power of approximately 5.5 kW and is ideally suited for milling, drilling, and threading operations. The machine features a tool changer (available) with a maximum tool length of 210 mm and a KM tool holder, which ensures high rigidity and fast tool changes. Fsdpfxezpyvhs Ak Uopl Equipment: The equipment includes: • Chip conveyor • Tool measurement system "Tool Eye" With a machine weight of approximately 5,040 kg, the Integrex 100-IV impresses with its compact design, high precision, and flexibility – ideal for economical complete machining in modern production environments. You are in the best hands with us – professional, reliable, and with a passion for machines! Necoyir I Rs Eanhd Held PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: excellent (used), Year of construction: 2005, turning length: 1,585 mm, turning diameter: 760 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, bar passage: 80 mm, Max. turning Ø: 760mm Fpedovgcpvjpfx Ak Uol X-axis: 630mm Y-axis: 230mm Z-Axis: 1585mm B Axis: 225° Spindle bore: 80mm Speed range: 6000Rpm B-Axis Speedranges:12000Rpm B-Axis power: 19kW Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 195125, turning diameter: 545 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, overall weight: 5,040 kg, The MAZAK Integrex 100-IV is a compact and highly precise CNC turning and milling center designed for complete machining of complex workpieces in a single setup. Thanks to the combination of turning and milling capabilities, as well as integrated B- and Y-axes, this machine is particularly suitable for demanding precision parts in medical technology, mechanical engineering, and precision mechanics. The machine was built in 2007 and is equipped with the powerful MAZATROL Matrix control unit, allowing for both conversational and ISO programming, and offering modern features for efficient and productive manufacturing. Technical Data at a Glance: • Travel range: 410 mm on the X-axis, 140 mm on the Y-axis (±70 mm), and 570 mm on the Z-axis. The B-axis features a swiveling range of 225°, enabling complex five-sided machining. The C-axis of the main spindle operates with a high positioning accuracy of 0.001°. • Maximum turning and swing diameter: 545 mm each. • The main spindle reaches speeds up to 6,000 rpm with a power output of approx. 11 kW, enabling dynamic and precise turning operations. The integrated milling spindle operates at speeds up to 12,000 rpm with approx. 5.5 kW of power output, making it ideal for milling, drilling, and tapping operations. • The machine is equipped with a tool changer (included), allowing a maximum tool length of 210 mm, as well as a KM tool holder system which ensures high rigidity and fast tool changes. Equipment includes: • Chip conveyor • “Tool Eye” tool measurement system With a machine weight of approx. 5,040 kg, the Integrex 100-IV impresses with its compact design, high precision, and flexibility—ideal for cost-effective complete machining in modern production environments. You are in the best hands with us – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All information subject to change without notice. Fsdpeyir I Rsfx Ak Ujpl

Condition: excellent (used), MAZAK INTEGREX 400-3S is a CNC Turning-Milling-Drilling Center designed for precision, high accuracy and reliability. Capacities: distance between centres 1500 mm, swing 760 mm, max turning length 1524 mm, bar passage 102/77 mm, tool magazine 40 stations (Ø max 90 mm, L 400 mm). Main specs: main spindle A2-8 stepless 35–3300 t/min 30 kW 1200 Nm; back spindle A2-8 35–4000 t/min 26/22 kW 500 Nm; milling spindle CAPTO C6 15–12000 t/min 18.5 kW 120 Nm. Travels X630 Y±115 Z1585 mm; feeds 0–8000 mm/min; rapid X/Z 38 m/min Y26 m/min; weight ~13300 kg; footprint 5110x2196 mm; height 2798 mm. Equipment: coolant 444 l (15 bar through milling spindle), Forkhardt 3-jaw chucks Ø400/315 mm, linear scale for X, RS232, PCMCIA, spindle sync, chip conveyor, synchronized tapping, foot pedal. Enables tight tolerances; typical applications: automotive, aerospace, medical, machine tools, watchmaking. Fpodpfx Ajyxn H Nek Uol

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: MAZATROL, controller model: Matrix, This 5-axis Mazak Integrex 100 IV ST was manufactured in 2011. It features a main spindle with a 6" hydraulic chuck, 4,000 rpm max speed, and 30 kW power. The second spindle matches these capabilities. Its milling spindle can reach up to 20,000 rpm. Includes a high-speed ATC with a 20-tool capacity, expandable to 120. Ideal for single-setup machining with its heavy-duty construction and MAZATROL MATRIX CNC control. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • There are 2 units available Technical Machine Benefits • Chuck type: 6" hydraulic chuck with bar capacity max /spindle speed: 4000 rpm max /power: 30 kw / 22 kw continuous/ max torque: 500 nm /spindle nose: a2-8/ acceleration time: 5. 1 seconds • Type: 6" hydraulic chuck max speed: 4000 rpm max power: 26 kw / 22 kw continuous /max torque: 724 nm /spindle nose: a2-8 /acceleration time: 2. 7 seconds Fpsdpsyalpisfx Ak Uol • Max speed: up to 20000 rpm (optional) /max power: 18. 5 kw/ max torque: 119 nm/ taper type: km63, capto c6, bt40 • X-axis: 410 mm/ y-axis: ±70 mm (total 140 mm) /z-axis: 805 mm/ b-axis (milling head): 210° rotation/ c-axis (spindle): 0. 0001° resolution (full contouring) • Max turning diameter: approx. ø545 mm/ max turning length: approx. 600 mm • Tool capacity: 20 tools standard, expandable to 120 /changer type: high-speed cam-driven system • Heavy-duty construction with linear guides “done in one” multi-tasking concept for single-setup machining/ cnc control: mazatrol matrix with 3d simulation/ intelligent thermal shield for automatic thermal compensation

Condition: used, Year of construction: 2001, machine/vehicle number: 154021, spindle motor power: 15,000 W, spindle speed (max.): 10,000 rpm, feed length X-axis: 580 mm, feed length Y-axis: 230 mm, feed length Z-axis: 1,137 mm, overall weight: 10,300 kg, The MAZAK Integrex 400 SY is a high-performance CNC turning and milling center designed for complete machining of complex workpieces in a single setup. By combining turning and milling operations and featuring an integrated sub-spindle, this machine is particularly suited for demanding manufacturing tasks in mechanical engineering, aerospace, and the automotive industry. Fedsyiryajpfx Ak Uepl Manufactured in 2001, this machine is equipped with the proven MAZATROL 340T control system, providing convenient and efficient programming. Technical Data Overview: The travel ranges are 580 mm on the X-axis, 230 mm on the Y-axis (±115 mm), and 1,137 mm on the Z-axis. The B-axis offers a swiveling range of 225°, allowing flexible 5-sided machining. The C-axis (main and sub-spindle) operates with a high positioning accuracy of 0.001°. The maximum turning diameter is 610 mm, and the maximum swing diameter is 760 mm. The main spindle reaches speeds up to 3,000 rpm with approximately 30 kW of power. Additionally, the machine is equipped with a sub-spindle (note: currently defective according to auction information). The integrated milling spindle achieves up to 10,000 rpm with approximately 15 kW of power. A 40-position tool changer and KM63 tool holder (alternatively Capto C6) enable versatile and flexible tooling options. Equipment: Included features: • Chip conveyor • Hydraulic unit • Electrical cabinet With a machine weight of approximately 10,300 kg, the Integrex 400 SY stands for high stability, precision, and performance in complete machining operations. You are in the best hands with us—professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All information is provided without guarantee.

Year of construction: 2021, operating hours: 900 h, condition: like new (used), functionality: fully functional, spindle diameter: 200 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, Equipment: documentation/manual, Mazak Integrex J200s Year 2021 Control unit: Smooth G Distance between spindles: 1000 mm Fpedpozz Rt Uefx Ak Usl Maximum machinable diameter: 500 mm Maximum bar capacity: 65 mm X-axis travel: 450 mm Y-axis travel: 200 mm / +- 100 mm Z-axis travel: 960 mm Maximum spindle speed: 4000 rpm Spindle taper: A2/6 Spindle bore (main spindle): 76 mm Tool magazine capacity (automatic tool changer): 36 Capto Chip conveyor: Mayfran belt type

Condition: used, Year of construction: 1995, turning diameter 510 mm turning length 1000 mm Fjdpfx Akjzyvcre Uspl control MAZATROL T PLUS total power requirement 22-26 kW weight of the machine ca. 6,5 t

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 157626, Manufacturer: Mazak Model: Integrex 200-2SY Controller: Mazatrol PC Fusion CNC 640 Robot NOT included Max. Machining diameter: 540 mm Max. Machining length: 1018 mm Spindlebore: 51 mm Spindlepower: 22 kW Fedpfx Asvlxf Dsk Ujpl 5000 rpm Travel: X = 530 mm Z = 1065 mm Machine weight: 7800 kg. Machine dimensions: L=5200 x W=2500 x H=2750 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning length: 1,585 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 230 mm, rotational speed (max.): 5,000 rpm, total height: 3,100 mm, total length: 6,100 mm, total width: 3,230 mm, overall weight: 16,600 kg, Multi-tasking lathe MAZAK - Integrex i-200ST x 1500U MACH-ID 9804 Make: MAZAK Type: Integrex i-200ST x 1500U Fpjdpfx Akezx Sh Ie Uel Control: SmoothX Year: 2016 5 Axis Simuteneous EIA/ISO Milling spindel with Threading Function Extra M-Code (1 pair for 2-M-Code) Preparation RMP-60 Sub spindel with C Axis any C1 + C2 Synchronisation Lower revolver with Live tools 6000 Rpm IKZ with 70 Bar main spindel IKZ with 15 Bar on lower Revolver Knoll Filtration KF-400/2300 SMW KNCS-N-325-104 3 chuck Robotunits C4N Belt conveyor / Part catcher with side conveyor belt CAPTO SANDVIK Tooling package with 36 tools (ca 16 included Turn & Mill) Max. turning Ø: 658mm X-Axis: 260mm Y-Axis: 1585mm Z-Axis: 230mm B Axis: 360° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 65mm Subspindle power: 22kW ATC / revolver: 36 Speed live tools: 12000Rpm B-Axis Toolsystem: HSK-63 Positions lower revolver:9 Speed live tools: 6000Rpm Power live tools: 5,5kW Length: 6100mm Width: 3230mm Height: 3100mm Weight: 16600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning diameter: 540 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 1,065 mm, controller model: Mazatrol 640, TECHNICAL DETAILS X-axis travel: 530 mm Y-axis travel: 140 mm Z-axis travel: 1,065 mm Z2-axis travel: 1,005 mm X-axis rapid traverse: 30,000 mm/min Z-axis rapid traverse: 33,000 mm/min Y-axis rapid traverse: 15,000 mm/min Z2-axis rapid traverse: 20,000 mm/min Milling spindle speed: 15–6,000 rpm Milling spindle motor power: 7.5 kW Max. milling spindle torque: 62.29 Nm Max. swing diameter: 540 mm Chuck size: 8" Max. machining diameter: 540 mm Max. machining length: 1,018 mm Max. bar diameter: 51 mm Main spindle Spindle nose: JIS A2-6" Spindle bore diameter: 61 mm Spindle speed: 35–5,000 rpm Motor power (30-minute rating): 22 kW (?) Max. torque: 350 Nm Counter spindle Spindle nose: JIS A2-6" Spindle bore diameter: 44 mm Spindle speed: 35–5,000 rpm Motor power (10-minute rating): 7.5 kW Max. torque: 57 Nm Turret type: Spindle turret with ATC Tool size (external turning tool): 25 mm Tool size (internal turning tool): 40 mm Max. milling tool diameter: 120 mm (?) Max. milling tool length: 250 mm Indexing time (90°): 0.5 s MACHINE DETAILS Fpedpfx Aezyl Hgjk Uol Control: Mazatrol 640 Coolant tank volume: 250 l Power consumption (continuous): 32.7 kVA Dimensions & Weight Dimensions (L x W x H): 3,485 x 2,105 x 2,416 mm Machine weight: 7,500 kg EQUIPMENT Documentation Chip conveyor

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total width: 2,100 mm, overall weight: 9,200 kg, product length (max.): 3,850 mm, number of slots in tool magazine: 40, number of axes: 5, This 5-axis Mazak INTEGREX 200-3 was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum turning length of 1045 mm. The machine is equipped with a main spindle speed of 5000 rpm and a milling spindle speed of up to 12000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX 200-3 machine we have for sale. Contact us for further details. Fpsdpfxozwx Acs Ak Ujl - Maximum Turning Diameter: 540-660 mm- Maximum Swing Diameter Over Bed: 660 mm- Maximum Turning Length: 1016-1045 mm- Main Spindle Speed: 35-5000 rpm- Milling Spindle Speed: up to 12000 rpm- Tool Holder: Capto C6- Machine Height: 2597 mm- Main Circuit Voltage: 3AC 400V 50/60Hz- Control Circuit Voltage: AC 100V / DC 24V- Main Motor Current: Max 84 A (400 V)- Rated Capacity: 50.0 kVA- Oil Cooling Unit Model: Daikin (Weight 190 kg)- Cooling Unit Capacity: Comp. 1.1 kW, Circulating Pump P1 0.4 kW, Circulating Pump P2 0.4 kW- Refrigerant: R407C (0.83 kg)

Condition: excellent (used), Year of construction: 2024, MAZAK INTEGREX i-100H Max. machining diameter: 600 mm Max. machining length: 590 mm Max. milling speed: 12,000 rpm Max. spindle speed: 6,000 rpm Machine is equipped with: - CNC control Mazatrol SmoothAi - Tool magazine for 74 tools Fpsdpjy Hwn Esfx Ak Uol - KITAGAWA 3-jaw chuck B-206, diameter 169 mm - Tool Eye - C-axis input accuracy 0.0001° - Y-axis - B-axis 0.0001° - 5-axis machining package for SmoothAi - Reinforced coolant pump 15 bar - Chip conveyor, side discharge

Condition: used, Year of construction: 2009, turning diameter: 2,000 mm, travel distance X-axis: 1,875 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 1,345 mm, rotational speed (max.): 300 rpm, rotational speed (min.): 10 rpm, Equipment: documentation/manual, CNC Vertical Multitasking Machine CNC Control Mazatrol Matrix 2 Turning diameter 2000 mm Turning speed 10-300 R/min Milling head speed 25-5000 R/Min Movement X-Y-X-axis 1875-1550-1345 mm B-axis travel -30/120° Fedpfszv T D Eox Ak Uspl C-axis indexing 360/0,0001° Tool taper Capto C8 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, Equipment: documentation/manual, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Fpsdszv Sfbepfx Ak Uol Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, MAIN INFORMATION Capacity and Working Area • Model: Mazak Integrex J-200 500U • Control: Mazatrol Matrix Nexus 2 • Year: 2014-05 • Serial No.: 255239 • Cutting time: 8,867 hours • Network: LAN connection • Condition: The machine is in very good technical condition with extremely high precision. • Max. turning diameter: 530 mm • Max. turning length: 500 mm • Bar capacity: 65 mm • Spindle bore: 76 mm Axis Travels • X-axis: 450 mm • Y-axis: 200 mm • Z-axis: 550 mm Spindles and Axes Main Spindle • Speed: 5,000 rpm • Power: 15 kW (increased power) • C-axis: 360° with 0.001° indexing Milling Spindle • Speed: 12,000 rpm Fpedpozwhdvjfx Ak Uol • Tool holder: Capto C6 • Through-spindle coolant (liquid/air) B-axis • Angular range: -30° to -190° • Full indexing Tooling, Magazine and Additional Equipment • Tool magazine: 72 positions • Tailstock: MT5 Auto • Chuck: Hainbuch Ø65 collet chuck • Tool measurement: Yes (measuring arm) • Parts catcher: Yes • Chip conveyor: Mayfran • High-pressure pump: 15 bar • Bar feeder: Irco ILS-MUK-7012 Machine Condition and History • The machine is fully operational and functions as it should. • No alarms or critical faults. • Smooth movement on all axes. • Spindles run smoothly without vibration. • Linear guides and ball screws are in good condition. • Hydraulic and pneumatic systems operate normally. • Regular in-house servicing. • Lubrication system OK. • The machine is clean and well maintained. Included Documentation • Photos of the machine • Video of the machine in operation • Screenshot of service history • Electrical diagrams on CD • Manuals on CD Machine Strengths • Multitasking machine with both turning and milling capabilities • Full 5-axis interpolation (C + B) • Capto C6 milling spindle with 12,000 rpm • Large machining capacity: 530 mm diameter / 500 mm length • 72 tool positions – rare and highly attractive • Through-spindle coolant (liquid/air) • Integrated robot interface (Smartshift BASE) • Irco bar feeder • Hainbuch collet chuck

Condition: excellent (used), Year of construction: 2004, MAIN INFORMATION Capacity and Working Area • Model: Mazak Integrex 200 MkIII • Control: Mazatrol PC Fusion 640 MT Pro Fpsdpfx Aozwhdcsk Uol • Year: 2004–06 • Serial No.: 169996 • Network: LAN connection • Condition: The machine is in very good technical condition and has been very well maintained. • Mainly used for machining aluminium and plastic. • Max. turning diameter: 530 mm • Max. turning length: 1,000 mm • Bar capacity: 65 mm • Spindle bore: 76 mm Axis Travels • X-axis: 580 mm • Y-axis: 160 mm • Z-axis: 1,045 mm Spindles and Axes Main Spindle • Speed: 5,000 rpm • Power: 15 kW • C-axis: 360° full interpolation Milling Spindle • Speed: 12,000 rpm • Tool holder: Capto C6 • Through-spindle coolant B-axis • Angular range: -30° to -190° • Full indexing Tooling and Magazine • Tool magazine: 40 positions • Tool measuring arm: Yes • Tailstock: MT5 Auto • Chuck: Kitagawa B-210, 10-inch 3-jaw chuck • Collet chuck: SMW AUTOBLOK KSB-MB-A60 • Smartshift BASE quick coupling for robot • Parts catcher: Yes • Parts collector: Yes • Chip conveyor: Mayfran • Bar feeder: STC Super 65 Included Documentation • Photos of the machine • Video of the machine in operation • Service history (photo) • Manuals • Electrical diagrams • Complete machine manuals • Complete programming manuals • Complete maintenance manuals Machine Strengths • Multitasking machine with both turning and milling capabilities • Full 5-axis interpolation (C + B) • Capto C6 milling spindle with 12,000 rpm • Large machining capacity: 530 mm diameter / 1,000 mm length • 40 tool positions • Through-spindle coolant • Integrated robot interface (Smartshift BASE) • STC Super 65 bar feeder

Condition: ready for operation (used), Year of construction: 2004, operating hours: 615 h, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,045 mm, total height: 2,597 mm, total width: 2,060 mm, overall weight: 9,700 kg, controller manufacturer: MAZATROL, controller model: PC FUSION CNC 640MT Pro, product length (max.): 3,820 mm, number of axes: 5, This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details. - Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible) Technical Specification Fedpfx Aozr U Aujk Ujpl Counter Spindle Yes

Condition: excellent (used), Year of construction: 2014, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 256316, turning length: 1,000 mm, turning diameter: 730 mm, spindle motor power: 18,500 W, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, rotational speed (max.): 1,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, torque: 160 Nm, workpiece weight (max.): 680 kg, spindle nose: Cône 7/24, N°40, table load: 880 kg, number of slots in tool magazine: 120, pallet changer: automatic, Equipment: CE marking, chip conveyor, documentation/manual, Secondhand Mazal Integrex i500V Fedpfx Aeyymrmek Uspl

Year of construction: 2006, condition: ready for operation (used), A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Fpodpfx Akexf Iklo Usl

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,500 mm, turning diameter: 720 mm, travel distance X-axis: 800 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 30,000 W, total height: 2,500 mm, total length: 5,000 mm, total width: 3,000 mm, workpiece weight (max.): 1,500 kg, type of input current: three-phase, overall weight: 16,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Mazak Integrex 50 YB × 1500 – CNC Multi-Tasking Machine Heavy-duty, versatile CNC turn-mill center with live tooling, B-axis, Y-axis, and a large chain tool magazine. Well-suited for demanding high-precision machining with heavy workpiece loads. Key highlights: Large capacity: 1,500 mm between centers, 710 mm swing over bed Heavy workpiece capacity: up to 1,500 kg shaft work / 400 kg chuck work Full multi-tasking axes: C-axis (0.001°), B-axis swivel (210°, 0.001° indexing), Y-axis (±105 mm) High tool capacity: chain magazine for 90 milling / 30 turning tools (ISO 50 CAT taper) Capacity & dimensions: Max swing over bed: 710 mm Max swing over cross slide: 520 mm Swing range depending on Y-axis position: 310–710 mm Distance between centers: 1,500 mm Max workpiece weight (incl. chuck): 400 kg chuck work / 1,500 kg shaft work Machine weight: 14,500 kg Main spindle & C-axis: Spindle speed: 5–3,000 rpm (stepless, 4 speed ranges) Main motor (AC): 30 kW (30 min) / 22 kW (continuous) Max torque: 314 kpm (approx. 3,080 Nm) C-axis indexing: 0.001° Turret, axis travels & rapid traverse: Turret swivel (B-axis): 210°, indexing 0.001° Travels: X 680 mm · Z 1,612 mm · Y ±105 mm Rapid traverse: X 12 m/min · Z 15 m/min · Y 10 m/min Z-axis feed force: 2,840 kp max (approx. 27.9 kN) / 1,150 kp continuous (approx. 11.3 kN) Tool shank: OD turning 25 × 25 × 150 mm / boring bar Ø50 mm Milling spindle & live tooling: Speed range: 18–6,000 rpm Milling motor (AC): 15 kW (30 min) Tool taper: ISO 50 CAT Automatic tool changer (ATC): Type: chain magazine Capacity: 90 milling tools / 30 turning tools Max tool diameter: 120 mm Max tool length: 460 mm Turning tool length (using B-axis): 165 mm Max tool weight: 20 kg Fsdpfxezugfyj Ak Ujpl Tailstock: Type: programmable quill and body Quill travel: 130 mm Quill diameter: 130 mm Quill taper: MT 5 (MK 5) Max clamping force: 1,500 kp (approx. 14.7 kN)