Condition: not inspected (used), Year of construction: 2007, operating hours: 43,558 h, functionality: unexamined, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle speed (max.): 5,000 rpm, spindle bore: 118 mm, controller model: SIEMENS SINUMERIK 840 D POWERLINE, distance between spindles: 900 mm, No reserve price – guaranteed sale to the highest bidder! Bdodpsym A S Iofx Ab Ioa Submitting a bid obligates the buyer to collect the item within the specified time frames: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 3,200 rpm Swing diameter: 270 mm Turning diameter: 120 mm Maximum bar diameter: 100/104 mm Spindle bore diameter: 118 mm Distance between spindles: 900 mm Travel X1-axis: 290 mm Travel Z1-axis: 650 mm Travel X2-axis: 180 mm Travel Z2-axis: 650 mm Travel Y1-axis: ±40 mm Travel Z3-axis: 670 mm Travel X3-axis: 175 mm Rapid traverse X/Z-axis: 30 m/min Rapid traverse Y-axis: 15 m/min Number of tool turrets: 2 Number of tools per turret: 12 All tool positions are driven MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D POWERLINE Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,500 x 2,500 mm Machine weight: 11,000 kg Operating hours: 88,040 h Spindle hours: 43,558 h EQUIPMENT Chip conveyor Foot switch Note: The machine has the following defects: - The B-axis is defective (located on turret 1) - The guideways and drives are worn in line with the machine’s age - The X2-axis (guide rails) runs slightly out of alignment in the range of 0.03 mm (re-measurement required) - Setting the reference values for the axes in the control system is not functioning - The hydraulic pump was replaced by a spare pump after failure and is now set up externally as a separate unit External reference: Bilstein - Lot 2

Condition: ready for operation (used), Year of construction: 1996, operating hours: 46,282 h, functionality: fully functional, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, Equipment: bar feeder, chip conveyor, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. Bjdpeym A E Iofx Ab Ioda TECHNICAL DETAILS Max. counter-spindle speed: 4,000 rpm Max. workpiece diameter: 56 mm Rapid traverse: max. 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece removal via counter spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 arcmin Counter spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 arcmin Tool Turret 1 & 2 Driven tools per turret: 10 (14) Max. speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Number of tool holders per turret: 10 (14) Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time according to VDI 2852: 1.2 s Index time per station: 0.6 s Over 5 stations: 1.5 s Counter spindle (numerically controlled in Z-direction) Max. speed: 4,000 rpm Max. clamping diameter: 65 mm Continuously programmable AC motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator station: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chucking system Two 10-station turrets with driven tool stations Counter spindle External reference: L. Schaible

Condition: not inspected (used), Year of construction: 2008, operating hours: 39,361 h, functionality: unexamined, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, controller model: SIEMENS SINUMERIK 840 D, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item within the specified timeframe, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter: 640 mm Bdodpeym A D Rofx Ab Iea Maximum turning diameter: 640 mm Maximum turning diameter (sub spindle): 400 mm Spindle distance: 1,500 mm Turning length: 1,185 mm Max. workpiece weight: 150 kg Slide travel X1: 550 mm Slide travel Y1: 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm Max. milling spindle speed: 12,000 rpm Max. main spindle speed: 4,000 rpm Max. sub spindle speed: 3,200 rpm Rapid traverse rate, Slide 1 (X/Y/Z): 40 / 24 / 70 m/min Rapid traverse rate, Slide 2 (X/Z): 24 / 36 m/min Rapid traverse rate, Slide 3 (Z): 36 m/min Tool holder: HSK 63 Number of tool positions in chain magazine: 40 MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 7,800 x 4,100 x 3,040 mm Machine weight: 16,500 kg Operating hours: 72,899 h Spindle hours: 39,361 h Bar feeder Model: COCCHE GIOVANNI CNC-DB 110 Year of manufacture: 2008 Serial number: CNCDB-08.306 Weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty and requires repair. - The Q2 axis (milling spindle tool changer) fails more frequently. - The X2 axis (guideways) moves slightly askew. - The guideways and drives show age-appropriate wear. External Reference: Bilstein – Lot 1

Condition: excellent (used), Year of construction: 2007, operating hours: 10,066 h, functionality: fully functional, CTX 410 V3 2-axis universal lathe with HEIDENHAIN Plus iT CNC control and SlimLinePanel - C-axis - Driven tools - AC main drive 21 kW, 240 Nm - Sauter disc turret - Partial hollow clamping device - Chip conveyor - Tailstock Turret disc with 12 tool stations, shank diameter 40 mm according to DIN 69880 instead of diameter 30 mm Bar machining package consisting of: - Hydraulic hollow clamping device Pull tube inner dia. max. 66 mm - Workpiece removal unit, pneumatically swiveling Bjdpfx Aeyx Ax Tsb Ieda for parts Ø65 mm x 120 mm long, - 4-color signal light (Note: Additional connection for bar feeder or bar loading magazine required)

Condition: used, operating hours: 11,562 h, total height: 1,900 mm, total length: 5,600 mm, total width: 2,000 mm, Empty weight: 8.500 kg Price: On request - Documentation available: No Bdsdpfxowp H Efj Ab Ija - CE certificate present: No - Operating hours: 11562 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 500 - Swing over bed [mm]: 1000 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Transport dimensions: 5600mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 8500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, total length: 2,600 mm, total width: 1,500 mm, total height: 2,100 mm, Empty weight: 1.500 kg - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: P30162 - Drive system: Teach-in - Control system brand: Fanuc - Power [kW]: 7.5 - Centre height [mm]: 200 - Swing over bed [mm]: 400 - Carriage turning diameter [mm]: 245 - Distance between centres [mm]: 1250 - Bed width [mm]: 320 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 15 - Max. spindle speed [rpm]: 2500 - Options: Three-jaw chuck, Removable bed - Swing over removable bed [mm]: 585 - Transport dimensions: 2600mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 2 Financial information Bdjdpfx Abox Ad Uzo Ioa VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1980, total length: 1,960 mm, total width: 1,050 mm, total height: 1,570 mm, Empty weight: 1.500 kg - Year: 1980 - Documentation available: No - CE certificate present: No - Serial number: 1123 - Drive system: Conventional - Power [kW]: 5.5 - Centre height [mm]: 180 - Swing over bed [mm]: 360 - Distance between centres [mm]: 800 - Bed width [mm]: 330 - Spindle bore [mm]: 52 - Min. spindle speed [rpm]: 44 - Max. spindle speed [rpm]: 2000 - Options: Quick-change tool post, Four-jaw chuck - Transport dimensions: 1960mm x 1050mm x 1570mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Bedpfsyvtkhsx Ab Ioda

Condition: used, total height: 1,400 mm, total length: 5,800 mm, total width: 1,650 mm, Empty weight: 5.500 kg - Documentation available: No - CE certificate present: No - Serial number: M4L-35492 - Drive system: Conventional - Power [kW]: 9.0 - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 80 Bsdpowxdhcsfx Ab Isda - Min. spindle speed [rpm]: 20 - Max. spindle speed [rpm]: 900 - Transport dimensions: 5800mm x 1650mm x 1400mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,500 mm, total length: 5,000 mm, total width: 2,200 mm, Empty weight: 5.500 kg Price: On request - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12598 - Drive system: Teach-in - Control system brand: Fagor - Control system type: 8055 - Power [kW]: 15.0 - Centre height [mm]: 350 - Swing over bed [mm]: 700 - Carriage turning diameter [mm]: 425 - Distance between centres [mm]: 2000 - Bed width [mm]: 450 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 310 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout, Removable bed - Type of digital readout: Heidenhain Manualplus - Control: CNC - Transport dimensions: 5000mm x 2200mm x 2500mm (l x w x h) - Transport weight [kg]: 5500kg Financial information Bdjdpfx Abswnhm Io Iea VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,700 mm, total length: 6,000 mm, total width: 1,700 mm, Empty weight: 6.500 kg Price: On request Lathe metal lathe Model: Conventional Manufacturer: TOS Type: SUI 63 Serial number: 407620860 Bsdpfx Aownhy Ieb Ioda Center distance: 4000mm Center height: 325mm Turning diameter: 630mm Spindle passage: 80mm Spindle speed: 11,2-1800 rpm Machine-afmeting: 6000x1700x1700mm Machine weight: 6500kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 325 - Swing over bed [mm]: 630 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 11.2 - Max. spindle speed [rpm]: 1800 - Transport dimensions: 6000mm x 1700mm x 1700mm (l x w x h) - Transport weight [kg]: 6500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,500 mm, total length: 3,500 mm, total width: 2,500 mm, Empty weight: 10.000 kg Price: On request - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 11.5 - Centre height [mm]: 700 - Swing over bed [mm]: 1400 - Carriage turning diameter [mm]: 640 Bedjyx Tvijpfx Ab Isda - Distance between centres [mm]: 800 - Bed width [mm]: 700 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 240 - Max. spindle speed [rpm]: 110 - Options: Digital readout, Facing lathe, Quick-change tool post - Transport dimensions: 3500mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1979, total height: 1,700 mm, total length: 4,900 mm, total width: 1,900 mm, Empty weight: 8.000 kg Price: On request Metal turning lathe Model: Conventional Manufacturer: TOS Type: SU-100 Centerdistance: 2000mm Turningdiameter above bed: 1050mm Spindle-hole: 105mm Motorpower: 22kW Spindle-speed: 2,24-450rpm Max. workpiece weight: 5000kg Including 4-jaw-chuck + lynette Machine-dimensions: 4900x1900x1700mm Machine-weight: 8000kg Bdjdownhf Rjpfx Ab Iea Machine has been tested, in very good condition Video is available - Year: 1979 - Documentation available: No - CE certificate present: No - Serial number: 0429412 - Drive system: Conventional - Power [kW]: 22.0 - Swing over bed [mm]: 1050 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Options: Four-jaw chuck, Fixed steady - Transport dimensions: 4900mm x 1900mm x 1700mm (l x w x h) - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total width: 1,700 mm, total length: 3,800 mm, total height: 2,000 mm, Empty weight: 6.000 kg CNC Internal grinder, converted from a CNC lathe - Documentation available: Yes - CE certificate present: No - Serial number: UC-1871 - Drive system: CNC - Power [kW]: 15.0 - Centre height [mm]: 115 - Swing over bed [mm]: 380 - Distance between centres [mm]: 635 - Spindle bore [mm]: 75 - Max. spindle speed [rpm]: 3500 - Options: Removable bed - Swing over removable bed [mm]: 520 - Transport dimensions: 3800mm x 1700mm x 2000mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bodpfjw A I Uhex Ab Ioda Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, total height: 2,000 mm, total length: 3,000 mm, total width: 1,800 mm, Empty weight: 4.000 kg Price: On request Driven tools included Barfeeder included - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: HT23372E - Drive system: CNC - Power [kW]: 15.0 - Centre height [mm]: 230 - Swing over bed [mm]: 450 - Distance between centres [mm]: 380 - Spindle bore [mm]: 59 - Min. spindle speed [rpm]: 30 - Max. spindle speed [rpm]: 5000 - Options: Bar feeder, Live tools - Transport dimensions: 3000mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information Bdjdpfewqf I Uex Ab Ioa VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 3,400 mm, total width: 1,100 mm, total height: 1,400 mm, Empty weight: 4.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 365 - Swing over bed [mm]: 725 - Carriage turning diameter [mm]: 400 Bdedpfxjytghaj Ab Ija - Distance between centres [mm]: 1600 - Bed width [mm]: 500 - Spindle bore [mm]: 82 - Min. spindle speed [rpm]: 16 - Max. spindle speed [rpm]: 1250 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3400mm x 1100mm x 1400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2014, total height: 1,950 mm, total length: 2,400 mm, total width: 1,600 mm, Empty weight: 2.000 kg Price: On request - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 3098034 - Drive system: CNC - Centre height [mm]: 450 - Swing over bed [mm]: 900 - Distance between centres [mm]: 900 - Bed width [mm]: 445 - Spindle bore [mm]: 60 Bdjdpfx Absxq Aqwe Ija - Max. spindle speed [rpm]: 1800 - X-axis travel [mm]: 203 - Z-axis travel [mm]: 762 - Transport dimensions: 2400mm x 1600mm x 1950mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 6,800 mm, total width: 2,200 mm, total height: 2,000 mm, Empty weight: 11.000 kg Price: On request - Documentation available: Yes - CE certificate present: No Bdjdpfx Aox Iriajb Ioa - Drive system: Conventional - Centre height [mm]: 630 - Swing over bed [mm]: 1300 - Carriage turning diameter [mm]: 1000 - Distance between centres [mm]: 4000 - Bed width [mm]: 700 - Spindle bore [mm]: 120 - Min. spindle speed [rpm]: 2.8 - Max. spindle speed [rpm]: 400 - Options: Three-jaw chuck, Four-jaw chuck, Removable bed, Quick-change tool post, Fixed steady, Travelling steady - Swing over removable bed [mm]: 1700 - Transport dimensions: 6800mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 4,500 mm, total width: 1,600 mm, total height: 1,500 mm, Empty weight: 5.000 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 0440922 - Drive system: Conventional - Power [kW]: 18.5 - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Carriage turning diameter [mm]: 400 - Distance between centres [mm]: 3000 - Bed width [mm]: 580 - Spindle bore [mm]: 82 - Min. spindle speed [rpm]: 9 - Max. spindle speed [rpm]: 1120 - Options: Three-jaw chuck, Four-jaw chuck - Transport dimensions: 4500mm x 1600mm x 1500mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Bedpjx Ryv Tjfx Ab Ioda Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2006, total height: 1,750 mm, total length: 2,790 mm, total width: 1,570 mm, Empty weight: 4.300 kg Price: On request - Year: 2006 - Documentation available: Yes - CE certificate present: No - Serial number: GN08201038G - Drive system: CNC - Control system brand: Fanuc - Control system type: 0i-Mate TO - Power [kW]: 15.0 - Swing over bed [mm]: 250 - Distance between centres [mm]: 460 - Spindle bore [mm]: 62 - Max. spindle speed [rpm]: 4500 - Options: Removable bed - Swing over removable bed [mm]: 460 - Transport dimensions: 2790mm x 1570mm x 1750mm (l x w x h) - Transport weight [kg]: 4300kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bedpewfpaqefx Ab Ieda Lukas van Rossum

Condition: used, Year of construction: 1975, total length: 4,400 mm, total width: 1,450 mm, total height: 1,700 mm, Empty weight: 4.000 kg - Year: 1975 - Documentation available: Yes - CE certificate present: No - Serial number: 1677 Bdedpjxixh Nofx Ab Iea - Drive system: Conventional - Centre height [mm]: 230 - Swing over bed [mm]: 460 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 7.1 - Max. spindle speed [rpm]: 1400 - Options: Three-jaw chuck, Quick-change tool post, Travelling steady, Fixed steady - Transport dimensions: 4400mm x 1450mm x 1700mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1970, total height: 1,400 mm, total length: 3,650 mm, total width: 1,300 mm, Empty weight: 2.200 kg - Year: 1970 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 9.0 - Centre height [mm]: 330 - Swing over bed [mm]: 660 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 88 Bdedpfx Ajwxwd Rjb Ioa - Min. spindle speed [rpm]: 5.6 - Max. spindle speed [rpm]: 3200 - Transport dimensions: 3650mm x 1300mm x 1400mm (l x w x h) - Transport weight [kg]: 2200kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 4,400 mm, total width: 1,000 mm, total height: 1,700 mm, Empty weight: 3.500 kg Price: On request Lathe, Metal turning machine Model: Conventional Manufacturer: Cazeneuve Type: HB575. Turning-diameter: 575mm Centerdistance: 3000mm Bdodpfxow Ryxts Ab Ioa Spindle-hole: 51mm Spindle-speed: 12-1000 rpm Incl. chipcontainers (2x) Incl. Lunette Incl. Four-jaw chuck 500mm Incl. Three-jaw chuck 300mm Machine-dimensions: 4400x1000x1700mm Machine-weight: 3500kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Swing over bed [mm]: 575 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 51 - Min. spindle speed [rpm]: 12 - Max. spindle speed [rpm]: 1000 - Options: Fixed steady, Three-jaw chuck, Four-jaw chuck - Transport dimensions: 4400mm x 1000mm x 1700mm (l x w x h) - Transport weight [kg]: 3500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1966, total length: 1,700 mm, total width: 900 mm, total height: 1,300 mm, Empty weight: 1.000 kg - Year: 1966 - Documentation available: No - CE certificate present: No - Drive system: Conventional Bodpfxoywt U Ns Ab Ijda - Centre height [mm]: 180 - Swing over bed [mm]: 350 - Carriage turning diameter [mm]: 200 - Distance between centres [mm]: 500 - Bed width [mm]: 190 - Spindle bore [mm]: 30 - Transport dimensions: 1700mm x 900mm x 1300mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2006, condition: used, total length: 4,300 mm, total width: 2,100 mm, total height: 2,100 mm, Empty weight: 5.000 kg Price: On request - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Siemens - Power [kW]: 30.0 - Swing over bed [mm]: 350 - Distance between centres [mm]: 600 - Bed width [mm]: 210 - Spindle bore [mm]: 62 Bdodpfxsyf H Ahe Ab Ija - Max. spindle speed [rpm]: 3500 - Options: Chip conveyor, Three-jaw chuck, Bar feeder, Live tools, C-axis - X-axis travel [mm]: 271 - Y-axis travel [mm]: 600 - Transport dimensions: 4300mm x 2100mm x 2100mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 10,560 mm, total width: 1,710 mm, total height: 1,400 mm, Empty weight: 9.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 22.0 - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 8000 - Bed width [mm]: 700 - Spindle bore [mm]: 62 - Min. spindle speed [rpm]: 8 - Max. spindle speed [rpm]: 1180 - Options: Digital readout - Type of digital readout: Sony - Transport dimensions: 10560mm x 1710mm x 1400mm (l x w x h) - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Bdedpfxoyg Hi Ro Ab Iea