Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Bodsv Nw Npjpfx Ab Ioda Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m Bdjdpfx Absvzln Ro Isa The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Bjdpfxewwar Io Ab Isda Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW

Condition: excellent (used), Year of construction: 2005, operating hours: 5,423 h, turning length: 510 mm, turning diameter: 356 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, spindle motor power: 15,000 W, total height: 2,230 mm, total length: 3,495 mm, total width: 2,050 mm, overall weight: 5,800 kg, CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 520 C-axis: 360º (0.001°) Turning length mm: 515 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Counter spindle Counter spindle travel mm: 525 Equipment Chip conveyor Signal lamp Tool measuring arm Workarea light Working time hours Under power: 7.456 Cutting Time: 5.423 Basic machine dimensions / weight Length mm: 3.495 Width mm: 2.050 Height mm: 2.230 Weight kg: 5.800 Bodpfx Aoui Ndbjb Ioda

Condition: good (used), Year of construction: 1956, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Meuser, lead screw and feed screw lathe type M3A -Turning length: 1400 mm -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm Bdodpfoh Uuzyox Ab Isa -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm

Condition: used, SMW Steady Rest Type SLU-X1-ms including mounting bracket for CNC lathe DMG Mori CTX 500 Condition: Used Features: Housing: fully sealed Safety: integrated safety valve Stroke control: prepared for end position monitoring Lubrication: connection for central lubrication (oil or grease) Technical Data Centering range (without chip guard): Ø 4 - 64 mm Centering range (with 3-piece chip guard): Ø 11 - 64 mm Operating pressure (min./max.): 8 / 35 bar Bdsdpfxjyx U H As Ab Isa Max. clamping force per roller: approx. 400 daN Centering accuracy: 0.02 mm (across the entire range) Repeatability: 0.005 mm Weight approx. 12 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,928 h, travel distance X-axis: 155 mm, travel distance Z-axis: 389 mm, overall weight: 3,760 kg, number of axes: 3, This 3-axis Biglia B301 SM was manufactured in 2006. It features a robust Hainbuch collet chuck for both the main and counter spindle, ensuring precision in your turning operations. The machine has a weight of 3760 kg and operates at a spindle speed of 504 RPM. If you are looking to get high-quality turning capabilities, consider the Biglia B301 SM horizontal turning machine we have for sale. Contact us for further details. • Electrical: 400 V, 3 phases, 40 A, 50 Hz • Spindle speed (DRN F): 504 • Workpiece counter: 30 • Operating time: 16,928 h Additional equipment • Hainbuch collet chuck for main spindle • Hainbuch collet chuck for counter spindle • LTA dust extraction system Bdodpeyx T Rasfx Ab Ioa • Not included: loading magazine, tool holders, collets Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2018, Lathes Travel distance X: 221 mm Travel distance Y :100 mm Travel distance Z: 400 mm turning length: 380 mm max. circulation diameter: 280 mm spindle boring: 65 mm input Power: 11 kW max. turning moment: 80 NM range of revolution from: 100 rpm range of revolutions till: 4500 rpm Control: Fanuc 0i-TF Powered tools: 12 working hours approx: 813 h control Fanuc Bodpfxeyx T Hus Ab Ijda Scrapper chip conveyor

Condition: good (used), Year of construction: 2015, Main and counter spindle Bdodpoyx Tk Tofx Ab Ioa 3 turrets Backside machining Fire extinguishing system Kraft & Bauer High-pressure system Büchele Bar feeder FMB Turbo 2-20

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Bdsdpfxevzmtzo Ab Iea Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning length: 800 mm, turning diameter: 350 mm, CNC Lathe TAKISAWA TMM 250 – Twin-Spindle, Y-Axis, Live Tooling Manufacturer: TAKISAWA Model: TMM 250 Control: Fanuc 180is-TB Year of manufacture: 2004 5. MACHINE SPECIFICATIONS Capacities Workpiece turning diameter: 780 mm Standard turning diameter: 220 mm Max. turning diameter: 350 mm Max. turning length: 800 / 200 mm (flange) Distance between spindle ends: 1130 mm Bar work capacity: 76.2 / 50.8 mm (left/right spindle) Travel X-axis travel (upper turret): 265 mm Y-axis travel (upper turret): ±50 mm Z-axis travel (upper turret): 760 mm A-axis travel (right spindle side): 800 mm X-axis travel (lower turret): 228 mm Z-axis travel (lower turret): 760 mm Spindles Number of spindles: 2 Spindle speed: 4,000 rpm (left, right) Number of gear stages: 1 Min. spindle index angle: 0.001° (Cs-axis) Spindle nose size: JIS A₂-8 / A₂-6 (left/right spindle) Taper bore (type, no.): 90 × 1/20 taper // 75 × 1/20 taper (left/right spindle) Spindle bearing inner diameter: 120 / 100 mm (left/right spindle) Spindle bore diameter: 86 / 63 mm (left/right spindle) Machine Description High-performance CNC lathe with twin spindles and two turrets. The machine enables simultaneous machining with both turrets on one spindle (4-axis machining), making it ideal for complex turning/milling operations. Highlights - 2 spindles with C-axis - 2 turrets (VDI 40) - Y-axis on upper turret (±50 mm) - Live tooling - FANUC CNC control (32 bit) - Touchscreen operation - Double holders possible (up to 60 tool positions) Technical Data Left spindle: Power: 15 / 22 kW Torque: max. 433 Nm Speed: up to 4,000 rpm Spindle bore: 86 mm Bar capacity: 76 mm Right spindle: Power: 11 / 18.5 kW Torque: max. 326 Nm Speed: up to 4,000 rpm Spindle bore: 63 mm Bar capacity: 51 mm Tooling: 2 turrets with 15 positions each Max. 15 live tools per turret Tool drive power: 3.7 / 5.5 kW Tool speed: up to 4,000 rpm Equipment - FANUC AC servo drives - 10.4" colour LCD with touchscreen - Rigid tapping - Automatic central lubrication - Coolant pressure: 4 bar (optional 6 bar high-pressure pumps) - Fully enclosed machine housing with work area lighting - CE compliant Additional Equipment Chucks: Left: Schunk HSL 315 Right: SMW BBM 250 Automatic work area door (pneumatic) Chip conveyor (hinged belt, right) High-pressure coolant pumps (6 bar each turret) Manual tool setter 3-colour signal lamp Bdsdpoyx S Iqefx Ab Ioa Machining Data Turning length: 760 / 200 mm Tool torque: max. 35 Nm Condition Used, fully functional – well-maintained industrial machine.

Condition: good (used), Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Bsdpotrvzxofx Ab Isda Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 750 mm, turning diameter: 590 mm, spindle bore: 78 mm, spindle speed (max.): 3,000 rpm, Equipment: documentation/manual, Centre distance: 750 mm Swing: 590 mm over bed / 375 mm over slides Spindle speeds: 25 - 3.000 rpm Spindle bore: 78 mm Revolver: 10 Platze Controller: Siemens 810D Shopmill Featured with: Bjdpfoxmvzusx Ab Isda - Double footpedals - Chipconveyor - Machine manuals Country of origin: Z. Korea Motor power: 25 kW Machine weight: 6.000 kg Machine LxWxH: 300 x 180 x 190 cm

Condition: good (used), turning diameter over cross slide: 870 mm, spindle bore: 162 mm, turning length: 3,000 mm, turning diameter: 870 mm, center width: 3,000 mm, Distance between centres: 3000 mm Swing: 870 mm over bed, 560 mm over cross slide Weight between centers: 3.600 kg without steady 4.400 kg with 1 steady 5.600 kg with 2 steadies Spindle speeds: 0 - 900 Rpm Spindle bore: 162 mm CNC Controller: Fagor Bedpfx Ajw Sm U Deb Ioda Featured with: - Additional chuck at back end of main spindle (oilcountry) - 1 fixed steady Ø420 mm - 1 moving steady - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 Toolholders - Coolingpump/chiptray at back end - Machine documentation Country of origin: Spain Motor power: 30 kW Machine weight: 9.000 kg Machine LxWxH: 5,1 x 2,4 x 2,0 mtr.

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 648 mm, turning length: 1,300 mm, turning diameter: 1,016 mm, spindle bore: 102 mm, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, spindle motor power: 30 W, rotational speed (max.): 2,400 rpm, Equipment: rotational speed infinitely variable, Centre distance: 1.300 mm Swing over bed: Ø 1.016 mm Swing over cross-slide: Ø 648 mm Spindle speed: 2,400 rpm Bar capacity: ø102 mm Turret: 10 stations live tooling Control: Haas CNC control C-axis: 0–360° X-axis travel: 432 mm Bdjdpeyut Dwofx Ab Ija Z-axis travel: 1,118 mm Supplied with: Live tools Chip Conveyor Hydraulic chuck Toolpresetter Machine user manuals Country of origin: United States Motor power: 30 kW Machine (L×W×H): 380 × 233 × 220 cm Machine weight: 11.500 kg

Condition: new, Year of construction: 2025, The machine on offer is a new stock machine. We will be happy to provide you with a suitable quotation. Bsdpfx Abeychtpo Ieda

Condition: new, Year of construction: 2022, functionality: fully functional, The tool holder is completely new and still in its original packaging. There is a second one, which is used but shows no signs of wear. (see picture) Spindle MTSK-40 Gear ratio 1:1 Max rpm. 6000 Maximum torque [Nm] 50 External cooling Yes Internal cooling Yes Internal cooling P=30 BAR The holder can also be used for the following CMZ machines. CMZ - TA15M/Y/MS/MY/YS 15 PCS. CMZ - TX52 Y2 QUATTRO CMZ - TX52 Y2 TWIN CMZ - TX66 Y2 QUATTRO Bjdjuzwutjpfx Ab Ijda CMZ - TX66 Y2 TWIN CMZ - TX66 Y3 CMZ - TA20M/Y/MS/MY/YS 15 PCS. CMZ - TA25M/Y/MS/MY/YS 15 PCS. CMZ - TA30M/Y/MS/MY/YS 15 PCS. CMZ - TTL 52 CMZ - TTL 66 CMZ - TX52 Y3

Condition: good (used), Year of construction: 2019, machine/vehicle number: XD-38II-CP-0703-H, turning diameter over cross slide: 38 mm, spindle speed (max.): 6,500 rpm, turning diameter: 38 mm, spindle bore: 39 mm, power: 7.5 kW (10.20 HP), The machine can be viewed at our Immendingen site after consultation. Included is the original chip conveyor and a bar loading magazine from FMB 3-36 turbo Includes Büchele SFB-301 high-pressure system 150 bar 4 valves Bdedovtmalopfx Ab Ija

Condition: good (used), Year of construction: 2016, The machine can be inspected at our premises in Immendingen after consultation. Included is the original chip conveyor and a bar feeder from FMB 2-20 turbo Incl. Kraft and Bauer fire extinguishing system Bjdpfju Rmy Rsx Ab Ieda

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, turning diameter over cross slide: 38 mm, spindle speed (max.): 6,500 rpm, spindle bore: 42 mm, rotational speed (max.): 6,500 rpm, power: 23 kW (31.27 HP), The machine on offer is a new stock machine. We are happy to prepare a customized machine offer for you. Bdedpoychqujfx Ab Ija

Condition: new, Year of construction: 2024, functionality: fully functional, turning diameter: 51 mm, The machine is a new storage machine. STANDARD EQUIPMENT main spindle 15KW, 4.000 rpm with Mitsubishi M830 control with 4 cross slides on the main spindle with an 8-fold servo turret VDI30x55 all stations can be used for red. WZG central milling drive 3.3 KW, 3000 rpm incl. stable polygon turning function (without tool holder) with full C-axis on the left spindle and on the pick-up spindle with 48-position spindle lock for support during routing Including pick-up spindle with workpiece collecting tray and finished part conveyor belt for falling cut-off parts or remnants With swiveling finished part conveyor belt for finished part unloading after rear side processing 4 tool holders for rear side with programmable KM high pressure for clamping device cleaning before the next workpiece transfer with HD-KM pumps, 70 bar with separate coolant tank (180 liters) Bdsdpfsug Up Njx Ab Ioa with handwheel Coolant and hydraulic pumps Bar feeder interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Cutting force monitoring at all stations Control cabinet with air conditioning unit 3-fold signal lamp The machine is also equipped with a turret for back machining. This is only designed for fixed tools. BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Programming pad for Lico machines Color Door RAL 7015 slate gray Chip tray/frame RAL 7024 graphite gray Housing RAL 7035 light gray

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter: 170 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, ⚡ DN SOLUTIONS DOOSAN – 2024 MODEL – UNUSED ✔️ 8 UNITS ✔️ Model: LYNX2100GA Bjdpfjywy T Sox Ab Ijda ✔️ Year: 2024.06 * 2 , 2024.12 * 6 ✔️ Chuck: 6” ✔️ Machining length: 330 mm ✔️ Machining diameter: 170 mm ✔️ Spindle bore: 45 mm ✔️ Spindle power: 18.5 kW ✔️ Max spindle speed: 6000 RPM ✔️ Guideways: LINEAR guideways ✔️ Control: Fanuc ✔️ Conveyor: Belt-type ✔️ Operating hours: 0 THE MACHINES ARE LOCATED IN OUR SOUTH KOREA WAREHOUSE. FOB PRICE INCLUDES PROFESSIONAL VACUUM PACKAGING. DISCOUNT AVAILABLE FOR BULK PURCHASES. Contact us for detailed photos, videos, and information – let’s talk and see how we can assist you. Muhammed Özkaya

Condition: ready for operation (used), Year of construction: 2003, operating hours: 7,375 h, spindle motor power: 22,000 W, spindle speed (max.): 3,500 rpm, bar diameter (max.): 71 mm, total width: 2,300 mm, total height: 2,100 mm, travel distance X-axis: 200 mm, overall weight: 8,000 kg, product length (max.): 5,000 mm, number of axes: 4, This 4-axis MORI SEIKI RL2500 was manufactured in 2003. It features a maximum turning diameter of 400 mm and includes two turrets with 12 stations each, providing efficient machining capabilities. The machine is equipped with a Mori Seiki MAPPS MSX-501 control and has a spindle speed of 3500 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI RL2500 multi-spindle turning machine we have for sale. Contact us for further details. • Spindles: 2 • Turrets: 2 (12 stations each) • Max turning diameter: 400 mm • Z travel: 265 mm (per turret) • Main spindle cutting time: 7,375 h • Second spindle cutting time: 9,801 h Additional equipment Bsdoyx D Ebjpfx Ab Ijda • Chip conveyor • Transformer • Robotic loading system Technical Specification Driven Tools No Counter Spindle No

Year of construction: 1963, condition: ready for operation (used), functionality: fully functional, Swing diameter: 600 mm Turning length: 1000 mm Equipment: - Three-jaw chuck Ø 250 mm - Four-jaw chuck Ø 250 mm - Live centre - Quick-change drill chuck MK5 Bdodpjyx Dtlefx Ab Ija - Documentation

Condition: good (used), Year of construction: 2011, GILDEMEISTER CNC Twin-Spindle Turning Center Type: CTX beta 1250 4 A Machine No.: 00700000211 Year of Manufacture: 2011 Control: CNC contouring control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G Power-on time: 41,378 h Program runtime: 24,814 h Bdodpowcxlwjfx Ab Ioa Technical data and equipment available upon request