Automatic lathe

STAR Micronics SH-12

Condition: ready for operation (used), functionality: fully functional, STAR SH-12 Cgodpfx Akjxwugdj Eet Control: Fanuc 21-T Device for unloading long parts Complete with IEMCA MINI BOSS 325 bar feeder

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Clamping units Collet machine with main and sub spindle: 26 mm Max. turning length with workpiece gripper: 67 mm Maximum part length: Max. 300 mm / Ø 26 Clamping cylinder L/R spindle: stationary Max. drilling diameter L/R spindle: Ø 12.00 mm Max. thread diameter L/R spindle: M8 Spindle Motor power: VAC 2.2/3.7 kW Speed range L/R spindle: 80 ~ 8,000 rpm L spindle travel Z1-axis: 70.00 mm R spindle travel X2-axis: 180.00 mm R spindle travel Z2-axis: 238.00 mm Tool slide Tool slide: Vertical linear slide Number of tool positions: 16.00 Number of tool positions slide 1: 6/4 Tool shank size: 16.00 mm Internal holder tool: Ø 20.00 mm Csdewqz Haopfx Ak Ejgt Travel X1-axis: 135.00 mm Travel Y1-axis: 260.00 mm Number of turning tools (L-spindle) X-/Y-unit: 2/2 (Use for L/R spindle) Z-unit: 2+2 Speed range: 100 ~ 4,000 rpm Turning tool motor: 0.5 kW / 0.5 kW Powered tools max. drill: 8.00 mm Turning tool motor max. drilling diameter: M6 Tool slide 2 Tool slide: Vertical linear slide Number of tool positions: 7.00 Number of tool positions slide 2: 3/4 Tool shank size: 16.00 mm Internal holder tool: Ø 20.00 mm Travel Y2-axis: 215.00 mm Machine dimensions Machine height: 1,670.00 mm Floor space (WxD): 2,320 mm×1,335 mm Machine weight: 3,000.00 kg SCOPE OF SUPPLY Among others: (list not exhaustive): Miyano BX-26S CNC lathe (year of manufacture: 2008) Tool holder (see photo of machine interior) Fire extinguishing system Control for high frequency spindle High frequency spindle Chip conveyor Oil mist separator Exact scope of supply as per photo series No guarantee is given for the correctness, completeness and up-to-dateness of the information.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, The positions of the rotating tools are: T01-02-03-04 / T22-23 / T34-35 - equipped with Iemca Boss 332E/32 new in 2006 - lot of collets / guide bushes - MSC-501 Control - the machine has always worked with oil. Cgedewpu Etjpfx Ak Est

Condition: ready for operation (used), Year of construction: 2021, This 3-axis Hurco VM 10i was manufactured in 2021, featuring advanced capabilities like MAX5 control with dual 19" LCD displays, Ethernet and USB interfaces, and a solid-state drive for enhanced performance. It includes high-pressure coolant systems through the spindle, integrated hydraulic tool clamping, and a chip auger for efficient chip management. Consider the opportunity to buy this Hurco VM 10i vertical machining centre. Contact us for more information about this machine. • Includes MAX5 control with detachable electronic handwheel • 2 × 19" LCD color displays (text + graphics) • Network interface • 2 software units for programming • Internal self-diagnostics • Windows platform • Integrated hydraulic tool clamping system • Cooling flood through spindle with ICS (20 bar) • High-pressure cooling flood system • Spindle cooler • Chip auger • Chip splash guard cabin • LED machine light in the work area • Indicator light for machine operating status • Trochoid milling cutter function for higher machining performance • Tool and workpiece measurement • Collision protection with islands • Synchronous thread cutting Cgodpfsx H A I Rsx Ak Ejt • ISNC extended NC mode

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, total height: 1,840 mm, overall weight: 5,100 kg, controller manufacturer: MAZATROL, number of axes: 3, This 3-axis Mazak Quick Turn NEXUS 200MS was manufactured in 2005. It features a maximum turning diameter of 380 mm, main spindle speed up to 5000 rpm, and a sub-spindle speed of 6000 rpm. The machine includes a Mazatrol 640T Nexus CNC control and has a robust design with dimensions of 2765x1780x1840 mm, weighing 5100 kg. If you are looking to get high-quality turning capabilities consider the Mazak Quick Turn NEXUS 200MS machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Cedpjx D Rmtsfx Ak Esgt • Maximum turning diameter: 380 mm • Maximum bar diameter (main spindle): 65 mm • Maximum bar diameter (sub-spindle): 42 mm • Distance between spindles: 580 mm Extra Information Machine has only worked in small batch 1-shift production. Dimensions Machine Depth 2765 mm

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - Max. turning diameter : 120 [mm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.1 [°] POWER SUPPLY - Supply voltage : 230 [V] Cgjdpfou E U Ufex Ak Est - Total installed power : 7.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5.400 x 1.900 [mm] - Machine height : 2.000 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 33912 [h] - Number of working hours : 21069 [h] EQUIPMENT - CNC : FANUC 160i - Coolant tank - Chips conveyor - Parts catcher - Parts conveying strip

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data Cgodog U Utvspfx Ak Est load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Cgodpfx Akeydaado Ejt Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm X2 travel: 120 mm Y2 travel: 44 mm Z2 travel: 212 mm X3 travel: 313 mm Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 620 h, Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Cedpfxjw Dfhze Ak Ejgt

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Cgodpjwty H Dofx Ak Est Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.