Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AH00000267, overall weight: 3,000 kg, Equipment: CE marking, MACHINE DETAILS Lhjdpfx Absxmguxj Ujn Electrical Data Rated voltage: 400 V Rated current: 37.5 A Frequency: 50 Hz Weight: 3,000 kg EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting length (max.): 4,300 mm, cutting width (max.): 4,250 mm, controller model: Power Control CADmatic 4.0, Set consisting of Holzma panel dividing saw and Bargstedt area storage system! Holzma HPP 380/43/43/R TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Main saw motor: 18 kW Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Lhedpfexpu Rgex Ab Ujn MACHINE DETAILS Control: Power Control CADmatic 4.0 – control unit with 17-inch flat display Operating voltage: 400 V (+10%/-5%) / 50 Hz Total connected load: 29 kW EQUIPMENT Grooving program Cut-out and tension relief program Labeling / labeling program / label printer PICA 108 Data interface for storage systems Cutting optimization software: Schnitt-Profit Professional Bargstedt Optimat TLF210/10/05 TECHNICAL DETAILS Carriage length: 13.45 m Span: approx. 12.5 m Upper edge of stack in storage: max. 1,700 mm Max. workpiece size: 4,200 x 2,070 mm EQUIPMENT Rotation drive 1 loading station and 1 unloading station

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, length stop: 4,500 mm, tool diameter: 400 mm, spindle speed (max.): 6,000 rpm, controller model: Weinig Unicontrol 12, TECHNICAL DETAILS Cross-cut saw (electronic, horizontally adjustable, infinitely variable) Number of tools: 1 pc. Motor power: 3.7 kW Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Tool diameter: max. 400 mm Axial adjustment: 150 mm NC axis, electronically infinitely variable Radial adjustment: pneumatic, 8 positions (e.g. edge rounding from above) Rounding unit Position: horizontal bottom Axial adjustment: together with cross-cut saw Electronic length stop Length: 4,500 mm 1st & 2nd tenoning and slotting spindle Spindle diameter: 50 mm Spindle speed: 2,800–4,000 rpm Motor power: 15 kW Tool diameter: 380–400 mm Tool clamping length: 640 mm, with counter-bearing Axial adjustment: 580 mm NC axis, infinitely variable Tailstock counter (entire clamping length is counter-supported) 1st & 2nd profiling spindle Lhjdpsxp U N Njfx Ab Uen Position: vertical right Spindle diameter: 50 mm Spindle speed: 6,000 rpm Motor power: 11 kW Tool clamping length: 400 mm, with counter-bearing Tool swing diameter: min. 140 mm Tool swing diameter: max. 232 mm Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Profile milling unit (grooving unit from above) Spindle diameter: 40 mm Motor power: 3.0 kW Tool clamping length: 40 mm Axial adjustment: 30 mm NC axis, infinitely variable Radial adjustment: 125 mm NC axis, infinitely variable Spindle speed: 9,000 rpm Tool swing diameter max.: 130 mm 4th profiling spindle Position: vertical right Number of tools: variable Motor power: 11 kW Spindle diameter: 50 mm Tool clamping length: 400 mm, with counter-bearing Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Spindle speed: 6,000 rpm Tool swing diameter min.: 140 mm Tool swing diameter max.: 232 mm 5th profile milling unit (hardware spindle) Position: vertical right Motor power: 3.0 kW Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment: 115 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 210 mm 6th profile milling unit (grooving unit from above), in auxiliary stand Position: vertical right, operating from above Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 40 mm Axial adjustment: 100 mm, 8 positions via pneumatic turret Radial adjustment: 80 mm, 8 positions via pneumatic turret Spindle speed: 5,850 rpm Tool swing diameter max.: 180 mm 7th profiling spindle (grooving unit from below) in auxiliary stand Position: horizontal bottom Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 125 mm Axial adjustment: 100 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 200 mm MACHINE DETAILS Slotting spindle: 2 pcs. Number of milling units: 7 pcs. Control: Weinig PC-Nexus Weinig Unicontrol 12 INCLUDING used window tooling OERTLI IV 68, IV 78 wood and wood-aluminium Additional features can be found in the attached document! Note: The machine has already been properly dismantled.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 130310, saw band length: 9,500 mm, saw band width: 180 mm, Bandsaw with carriage, conveyor belts, and automatic stacking device! TECHNICAL DETAILS Saw band length: 9,500 mm Saw band width: 180 mm EQUIPMENT Infeed conveyor belt for feeding logs Lsdpfx Asxpv Rhjb Ujhn Outfeed conveyor belts Automatic stacking device Note: The machine can be provided ready for free loading.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: V001257, Profi-Joint Shaper Lhodpfjv Ryb Rjx Ab Usn 6000mm two stage press Includes PUR glue pump and applicator Additional consideration: Sawdust extraction (A$20,000)

Condition: excellent (used), Locatelli Oriental Matik 1350 lathe component grinder Working length: 1350 mm Lhedoxqzg Dspfx Ab Uon Two grinding units Six stations for grinding components Minimum grinding length: 220 mm Maximum grinding length: 1350 mm Maximum grinding diameter: 120 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8011510B, filter area: 72 m², production capacity: 80,000 unit/h, Equipment: CE marking, TECHNICAL DETAILS Capacity: 80,000 m³/h Number of filter bags: 384 pcs Filter length: 2,500 mm Filter diameter: 230 mm Filter area: 72 m² MACHINE DETAILS Connected load: 15 kW Weight of upper section with motors: 4,000 kg Weight of intermediate section with filter sleeves: 4,000 kg Weight of lower section with legs: 2,000 kg Main fan: 12 pcs Power of main fan: 15 kW Nominal air flow: 22 m/s Ledjxmgtzepfx Ab Uohn EQUIPMENT Return lines Control cabinet CE marking Extinguishing system Control cabinet Shaking system Vacuum installation Note: The machine has already been dismantled.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, pressing force: 90 t, cylinder diameter: 85 mm, stroke length: 350 mm, number of cylinders: 6, TECHNICAL DETAILS Electric heating plates: 3,000 x 1,300 mm Number of heating plates: 2 pcs. Total pressing force: 90 t Cylinder stroke: 350 mm Number of levels: 1 pc. Level opening: 350 mm Press cylinders: 6 pcs. Diameter of press cylinders: 85 mm MACHINE DETAILS Working temperature: 90°C Max. temperature: 120°C Electrical data Ledpjxnyqpofx Ab Uehn Operating voltage: 400 V/50 Hz Connected load: 22 kW Heating capacity: 22 kW Power requirement hydraulic unit: 3 kW EQUIPMENT Movement of the press table via rack-and-pinion and parallel guides Electronic control unit with touchscreen Digital timer for setting pressing time Digital input and monitoring of pressing pressure Digital diagnostics and fault message display Safety circuit with two-hand operation Safety pull-cord Safety support for lower press table EFC electronic flatness control Gold anodized heating plates (Busse) Note: Dismantling and loading can be offered for approx. €1,200 net.

Condition: good (used), Year of construction: 2013, Höcker extraction system with rotary valve Lodpfexqzaqex Ab Ushn Technical data: Inlet diameter 300 mm Nominal air volume 5,100 m³/h Maximum air volume 6,000 m³/h Vacuum at nominal air volume 2,700 Pa Motor power 7.5 kW Shaker motor 0.18 kW Rotary valve The illustrated transport fan (blue) is not included in the delivery Further technical data available upon request Technical data provided without guarantee. Information taken from the machine's nameplate.

Condition: excellent (used), Catalogue Number 7780 TECHNICAL DATA SURFACE PLANER: - shaft width: 410 mm - 3-knife shaft - adjustable, tilting fence - table length: 2,060 mm - both tables adjustable THICKNESSER: - max thickness of workpiece in thicknesser: 200 mm - thicknesser shaft guard - from above: - anti-kickback fingers - toothed, driven, swivelling infeed roller - planing shaft - smooth, driven outfeed roller - 2 adjustable rollers in lower table - main motor: 3 kW - 2 feed speeds - dimensions (L/W/H): 2,190 x 800 x 970 mm - weight: 900 kg ADVANTAGES – Italian manufacture – very good condition – used surface planer-thicknesser Net price: 14,900 PLN Net price: 3,550 EUR Ljdexqyqhopfx Ab Ujhn Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100001570, travel distance Z-axis: 180 mm, table width: 1,620 mm, table length: 5,510 mm, rapid traverse X-axis: 56 m/min, rapid traverse Y-axis: 56 m/min, TECHNICAL DETAILS Processing table dimensions (L x W): 5,510 x 1,620 mm Z-axis travel distance: 180 mm Maximum vectorial rapid traverse speed X/Y-axis: 56 m/min Spindle unit speed: 4,000 rpm Tool changer slots: 44 Connection diameter: 250 mm MACHINE DETAILS Dimensions & Weight Dimensions: 9,700 x 5,020 x 2,650 mm (LxWxH) Lsdpfexmgr Rsx Ab Ushn Net weight: 5,000 kg Spindle unit motor power: 5.5 kW Air consumption: 4,430 m³/h Air velocity: 25 m/s Voltage: 400 V / 50 Hz EQUIPMENT PRO-Speed safety system TEPCAD control panel with touchscreen color display Linear tool changer TBR14 Linear tool changer FAST14 Air blower on the electrospindle XY-axis safety guard Vacuum pump 150/300 m³/h 5-axis unit ‘JQX’ version 13.5 kW Fixed pedestal: 145 x 145 H=75 mm Rotatable gondola: 145 x 55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect 1 year (including Gateway Kit plug & play) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE software for human-machine interface (HMI) Maestro software for CNC programming Hardware key for Maestro CNC Advanced Maestro 3D module Additional key for Maestro CNC (USB connection) Windows 10 embedded 64-bit operating system Console with integrated PC eye-M PRO

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 435.046, workpiece weight (max.): 75 kg, workpiece height (max.): 60 mm, rotational speed (max.): 20,000 rpm, workpiece length (max.): 5,600 mm, working width: 1,300 mm, TECHNICAL DETAILS Lhjdpfx Aboxnyn Ij Uon Working width: 1,300 mm Workpiece dimensions Workpiece width (X): 60 - 1,300 mm Workpiece thickness (Z): 6 - 60 mm Workpiece length (Y): 263 - 5,600 mm Workpiece weight: max. 75 kg Drilling spindles: 13 vertical, 6 horizontal in Y, 2 horizontal in X Grooving unit: 1 in Y Milling unit motor power: 5.5 kW (S1) Speed range: 1,000–20,000 rpm Tool holder: HSK63F Maximum cutter length: 130 mm MACHINE DETAILS Electrical connection: 400 V, 3 phases, 50 Hz, 12 kVA, 17.5 A Air supply: 7 bar EQUIPMENT Counter-pressure device for 1,300 mm working width Foldable roller table 765 mm for front and rear of the machine, width 500 mm Auxiliary stop 600 mm with integrated rollers for roller tables Additional safety device with lamella curtain Extraction distributor: ∅ 160 mm / ∅ 80-80-80 mm, spacing 196 mm Documentation

Condition: good (used), Year of construction: 1996, Dial gauge in handwheel Motor 1.5 kW pneumatic hold-down Dowel drilling device Lsdpsxqy T Njfx Ab Uehn Stop Further technical data on request

Condition: excellent (used), Catalogue number 7795 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 60mm - Hopper diameter: 1000mm - Output: up to 10 briquettes/min, approx. 90 kg/h - Automatic machine operation - Motor: 5.5 kW - Dimensions (L/W/H): 1800x1150x1430mm - Weight: 634kg ADVANTAGES – Italian manufacture – Used briquetting press Ljdpfx Absxqycke Uohn – Unpainted – In very good condition Net price: 34,900 PLN Net price: 8,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, price may change)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 213-051, cutting width (max.): 400 mm, wheel diameter: 860 mm, TECHNICAL DETAILS Saw blade type: Horizontal Saw wheel diameter: 860 mm Maximum cutting width: 400 mm MACHINE DETAILS Model: Hhepunkt HP-400 Year of manufacture: 2018 Serial number: 213-051 Ljdpfx Absxmgq To Uohn Motor power: 22 kW (30 HP) EQUIPMENT Conveyor belt (in poor condition)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 30 mm, travel distance X-axis: 3,000 mm, hole diameter: 35 mm, swivel angle A-axis (max.): 360 °, TECHNICAL DETAILS X-axis: 3,000 mm A-axis: 360 degrees Feed rate: 20 m/min Material thickness Z: 12 mm - 30 mm Maximum hole diameter: 35 mm Minimum hole diameter: 3 mm Maximum recess depth with saw blade: 10 mm Panel dimensions Minimum panel size X: 300 mm Minimum panel size Y: 120 mm Minimum panel size Z: 12 mm MACHINE DETAILS Motor power: 0.75 HP Operating voltage: 400 V Lhedsxnyk Aspfx Ab Uen Required extraction capacity: 2,300 m³/h EQUIPMENT 4-position drill chuck Saw blade

Condition: good (used), Year of construction: 2014, Drive 1.5 kW Lhsdpfxexqy S Ss Ab Usn Belt speed 16 m/sec Belt width 150 mm Belt length 2270 mm Table size 680 x 310 mm Required space approx. 1350 x 600 mm Weight approx. 162 kg Extraction ports 2 x 100 mm All information has been taken from a brochure, therefore provided without guarantee. Technical data on request – see images for equipment details.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 941, working height: 1,350 mm, working width: 600 mm, working length: 2,500 mm, TECHNICAL DETAILS Pressing length: max. 2,500 mm Pressing height: max. 1,350 mm Working depth: max. 600 mm MACHINE DETAILS Electrical data Rated voltage: 3/N/PE/400 V Rated current: 11 A Rated power: 4.7 kW Ljdpfx Ajxnyg Rsb Uohn Frequency: 50 Hz EQUIPMENT Vertical and horizontal press beams operated electromechanically Pressure build-up via frequency-controlled geared motors Vertical and horizontal press pressure adjustable separately Pressing time adjustable

Condition: ready for operation (used), Year of construction: 1968, Tilting spindle moulder Holz-Her power feed with three rollers Lodoxqy Iyepfx Ab Uehn Manual height and tilt adjustment Technical specifications available on request All information provided without guarantee

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, Equipment: scorer, TECHNICAL DETAILS Double roller carriage length: 3,000 mm Cutting width: 1,300 mm Drive power: 5.5 kW Lsdjxnx Hcepfx Ab Uohn Saw blade diameter: 500 mm Table extension: 840 mm EQUIPMENT 2-axis scoring unit Mitre/fence angle stop

Condition: good (used), Year of construction: 1997, Maximum volume approx. 3200 m³/h Lhodpfx Ajxqy Hvsb Usn Extraction nozzle D = 200 mm Motor power 4 kW Filter area approx. 16.8 m² External dimensions (L x W x H) approx. 2400 x 920 x 2150 mm Weight approx. 350 kg Two chip bins, each approx. 190 l Nominal air flow 2260 m³/h Associated negative pressure approx. 2650 Pa All information without guarantee. Data taken from a brochure.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: S-280-09.980.004, saw blade diameter: 300 mm, cutting length (max.): 5,300 mm, cutting height (max.): 2,200 mm, cutting depth: 80 mm, Equipment: scorer, TECHNICAL DETAILS Cutting Data Vertical cutting height: 2,200 mm Horizontal cutting height: 2,100 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade diameter: 300 mm Extraction connection: 160 mm MACHINE DETAILS Dimensions (L x W x H): 7,300 x 1,500 x 3,150 mm Motor power: 5.5 kW Motor voltage: 3 × 400 V EQUIPMENT - Automatic horizontal feed - Automatic vertical feed - Horizontal positioning control - Welded frame with high rigidity - Pneumatically retracting support grid - Stable latching of the saw unit at top and bottom - Retractable riving knife for cutouts - Control panel at eye level - Digital display on longitudinal stop - Roller conveyor system - Scoring unit - Workpiece-supporting bed Lhjdpfx Absxnx Aqo Usn - Extraction unit TRK - ECO version with pneumatic extraction duct control - Touch screen - Dust tested

Condition: good (used), Year of construction: 1981, functionality: fully functional, Passage 570 mm Band length 4400 mm Table size approx. 580 x 680 mm Lodjxqy E Sspfx Ab Uehn Bandsaw blade guides Technical data on request Information without guarantee

Condition: good (used), Year of construction: 2013, Cartridge system (for rolls and strip material) Reinforced cutting cylinder Cutting unit Multi-function milling station (chamfer-flush-radius) Pull scraper Edge thickness 0.3–3 mm External dimensions L x W x H approx. 3060 x 1040 + magazine plate overhang) x 1350 mm Ljdpfx Aoxqy Elob Ushn All information without guarantee; data obtained from a brochure.

Condition: good (used), Two-knife cutterheads Working width 600 mm Table length 2000 mm Height adjustment via handwheel Required space 2000 x 1200 x 1000 mm Lhsdpfx Absxqy Awj Uon Robust design with extraction hood