Used machining centers (vertical) X-axis travel 400-599mm for sale (248)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,831 h, functionality: fully functional, machine/vehicle number: 15465588584, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller model: Heidenhain iTNC 530 HSCI, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 400 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 375 mm B-axis: -5 to +110 degrees C-axis: 360 degrees Table dimensions: 450 x 400 mm Maximum workpiece weight: 250 kg Spindle speed: 18,000 rpm Tool interface: HSK-A63 Number of tool positions: 60 Rapid traverse rate: 80 m/min MACHINE DETAILS Control system: Heidenhain iTNC 530 HSCI Machine weight (approx.): 7,150 kg Operating hours Spindle hours: 23,831 h Power-on hours: 57,330 h Dksdpfxjzgt U Es Aahep EQUIPMENT Band filter system NC rotary table Handwheel FS Coolant gun Tool measurement system Chip conveyor Rotoclear viewing window Temperature monitoring

Condition: used, Year of construction: 2012, FANUC Robodrill Fanuc 31i control X 500mm Y 400mm Z 330mm Tool magazine with 21 positions for BT30 tools BT30 spindle taper Djdpfxozktvke Aahokp Spindle speed: 24,000 rpm Lehmann EA510 5-axis rotary table Blum part probe Height probe on the table

Condition: used, Year of construction: 2006, x-travel 450 mm y-travel 330 mm z-travel 350 mm control Heidenhain iTNC 530 turning speeds 42.000 U/min tool taper HSK 40 E table surface area 470 x 400 mm T-slots 5 Djdpoy Nn Etofx Aahskp max. table load 500 kg Number of working hours 51993 h spindle hours 13858 h total power requirement 15 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 700 mm z-travel 500 mm A-axis 240 (-120/+120) ° C-Axis 360 ° control Siemens 840 D faceplate diameter 440 mm T-slot - width 14 mm T-slot - distance 75 mm max. table load 400 kg max. turning speeds 20.000 min/-1 tool taper HSK 63 A workpiece length 330 mm tool diameter 125 mm change-time chip to chip 4,5 sec weight of the machine ca. 10,5 t dimensions of the machine ca. 2,5 x 5,2 x 3,5 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories: Dksdpsxq R E Nsfx Aahep - Kuka KR200-3 comp Robot Three identical machines are available. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Siemens control system, 12-position tool changer, BT40, Travel range X500 - Y300mm, Renishaw touch probe, Accessories. Dkjdozkk Nujpfx Aahop

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Dkedpfezkkgmsx Aahsp

Condition: new, machine/vehicle number: 246203 xxxx, functionality: fully functional, Ideal basis for setting up CNC machines and applications The FB2 flatbed unit is ideal for getting started with CNC technology and is ideal for model making and hobby applications. The FB2 is also often used in industry for measuring and dosing technology, as it offers extensive expansion options. The unit also offers access to the isel modular system. Various sizes from travels of 530 x 500 mm to 1030 x 1250 mm and extensions such as base frame and housing are available and can be individually combined. BEST SUITABLE FOR: • modular isel building block system • universal range of applications • easy handling • ideal for laboratory, model making and workshop use • assembly and mounting • printing and engraving • drilling and milling Dkedshqmamspfx Aahop • dosing and screwing • forming and modeling • gluing and casting • soldering and welding • measuring and testing • sawing and cutting and much more Z-passage = 190 mm (Z-passage = 300 and 500 mm on request!) FEATURES: • durable stepper motors in the 200 W range • reliable LES units with steel ball screws are installed as drives • clamping of workpieces using a T-slotted plate • available with and without protective cover • variable gantry apertures, depending on customer application OPTIONS: • iSA milling spindles and water-cooled HF milling spindles • Cooling spray device • Cold air cooling, Cool-Min • Automatic tool length measurement • Rotation units • Workpiece clamping systems (hand lever, vacuum clamping tables, etc.) • Suction systems • LED machine room lighting • RAL color selection • CAD/CAM-Software • Diffusers 190 mm, 300 mm or 500 mm • Powerful 4-axis control controller • Underframe • Enclosure with sliding/folding door

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 179, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 803, rotational speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 510 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table size: 750 x 550 mm Spindle speed range: 8,000 rpm Spindle mounting: BT40 MACHINE DETAILS Control system: MSC 803 Djdpfx Aozi D E Toahjkp Weight: 4,500 kg EQUIPMENT 25-position tool changer Coolant system

Condition: ready for operation (used), Year of construction: 1995, travel distance X-axis: 560 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, number of axes: 3, This 3-axis Bridgeport VMC 560/22 was manufactured in 1995. It features an X-axis travel of 560 mm, Y-axis travel of 380 mm, and Z-axis travel of 520 mm. The machine is equipped with a spindle speed of 6,000 rpm and a tool magazine with 22 positions. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 560/22 vertical machining centre we have for sale. Contact us for further details. Tool taper: BT40Rapid Traverse: X/Y: 20 m/min; Z: 16 m/min • Outer length: Approx. 840 mm Dkjdpfx Aozizi Ajahjp • Outer width: 360 mm • Table load: 500 kg • Number of tool slots: 22 • Tool taper: BT40 • Max tool length: 250 mm • Maximum tool diameter (adjacent pocket empty): 130 mm • Maximum tool weight: 6 kg

Condition: good (used), Year of construction: 2008, Vertical machining center Machine type: Ingersoll OPS 550 Control: Andronic 2060 Year: 2008 SPECIFICATIONS Travel X-Axis: 550 mm Y-Axis: 400 mm Z-Axis: 400 mm Dkodjziy Dxopfx Aahsp Rapid motion: (X/Y/Z): 60 m/min. Panning head Max. revolution: 0 - 42.000 rpm Spindle power: 15 / 17 kW Tool: HSK 40 E Tool capacity: 32 Table size: 650 x 500 mm Max. Table Load: 500 kg Req. space (LxBxH): 2,58 x 1,9 x 2,26 m Machine weight: 7.200 kg Equipment Caliper Electronical handwheel Erowa Nullpunktspannsystem

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, The Matsuura MAM72-25V belongs to the well-known MAM72 series and was specifically developed for automated and unmanned 5-axis machining. It is ideally suited for complex workpieces with the highest requirements for precision, process reliability, and cost-effectiveness. The machine combines a compact machine concept with automatic pallet change, a large tool magazine, and simultaneous 5-axis machining. This makes it ideal for single parts, small series, and series production. The MAM72 series is particularly well-established in the following industries: Aerospace Medical technology Precision engineering Tool and die making Mold making Mechanical engineering Automotive Precision technology The MAM72 series was developed by Matsuura specifically for long, unmanned operation and offers high flexibility with a small footprint. Highlights: ✔ Simultaneous 5-axis machining ✔ Automatic pallet change ✔ Ideal for unmanned manufacturing ✔ Very high precision ✔ Direct drive of the rotary axes ✔ Fanuc control ✔ High process reliability ✔ Short tool change times ✔ Compact footprint Dedpfsziy Rrsx Aahjkp ✔ Ideal for multi-machine operation ✔ Excellent for complex components ✔ High repeatability

Condition: excellent (used), Year of construction: 2008, HAAS MINI MILL HE CNC machining center Year: 2008 Dedpfx Aaozivtpehekp CNC control: HAAS Travels in the X/Y/Z axis: 406/305/254 mm Work table dimensions (L x W): 914 x 305 mm Maximum spindle rotational speed: 6000 rpm Spindle motor power: 6 kW Tool magazine capacity: 10-positions Tool holder type: SK 40 Dimensions (L x W x H): 2000 x 2000 x 2500 mm Weight of machine: 2200 kg Accessories/options: - tool holders, SK40 - precision vices, pneumatic operated - Mahr taster Under power in our warehouse!

Condition: used, Year of construction: 1999, TOPPER TMV 400APC year 1999 Table surface : 500 x 300 [mm] Dsdpfxouanwms Aahjkp - Strokes X x Y x Z : 400 x 300 x 300 [mm]. - Max. weight on table : 200 [kg]. - Quick feeds : 30 [m/min]. - Work feeds : 1 to 10,000 [mm/min]. - Spindle type : BT30 - Spindle speed : 8.000 [Rpm] - Spindle power : 3,7 [kW] - Changer : 10 tools - Dimensions : 2900 x 1560 x 2335 [mm]. - Weight : 3.0 [t] fully working machine

Condition: used, Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 480 mm, controller manufacturer: siemens, controller model: 840 DSL, rotational speed (max.): 18,000 rpm, Equipment: chip conveyor, 6 axis milling & turning center yom 2015 with control Siemens 840 DSL in perfect conditions Dkedeh Elngspfx Aahep

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,500 h, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis CHIRON FZ 08K S Magnum SK was manufactured in 2007. It features a Siemens 840D control unit, with impressive travels of 450 mm in the X-axis, 270 mm in the Y-axis, and 310 mm in the Z-axis. The machine includes a 40-position tool changer and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 08K S Magnum SK vertical machining centre we have for sale. Contact us for further details. • Overhaul: Factory overhauled and technically updated by Chiron (CMS) in 2017 • Last Spindle Replacement: September 2025 • Last Maintenance: Major annual service (4,000 h) performed in October 2025 • NC Swivel Head Range: −20° / +115° • Rapid Feed X/Y/Z: 75 m/min • Acceleration X/Y/Z: 1g / 1.5g / 2g • Tool Changer: 40 positions, HSK-A40 • Chip-to-Chip Time: 2.6 s (vertical) • Rotary Table: AWU 160 with D105 mm positioning axis • Operating Hours: Approximately 22,500 h Additional equipment • Clamping: Hainbuch Spanntop D100 collet chuck • Bar Loader: IRCO SiMag 100.1-3000 for round and profile material • High Pressure Coolant: 70 bar with Vario valve • Coolant Filtration: Knoll VRF, 400-liter vacuum rotation filter • Chip Conveyor: Scraper belt, 1,050 mm discharge height • Measurement/Monitoring: Renishaw TS27R 3D touch probe; tool life monitoring; tool breakage control • Collision Monitoring: Brankamp Marposs CMS 100 • Guide Channel Sets: Breuning IRCO sets included (by arrangement) • Collets: Hainbuch collets included (by arrangement) • Tool Holders: Approximately 500 pieces HSK-A40 • Spare Parts: Included for this machine type Dsdpfxoypb Tpj Aahjkp • Operating Materials: Specific operating fluids/materials included

Condition: good (used), Year of construction: 2001, functionality: fully functional, Vertical machining center, operator-attended machine with 3 axes Manufacturer: UNITECH Germany Model: CFS 2 Year of manufacture: 2001 Control system: Heidenhain Travel range: X Y Z = 1500 x 300 x 300 Dodszkhlyopfx Aahjkp Table size: 1800 x 350 mm Spindle power and speeds: 6000 rpm Tool holder: SK 40 Equipment: with internal spindle cooling Chip conveyor Design: Operator-attended machine

Condition: used, machine/vehicle number: J500111T, Hardinge Bridgeport Interact T450P Vertical Machining Centre Siemens 810D CNC Control Table Size: 500 × 400mm X-Axis Travel: 450mm Y-Axis Travel: 400mm Z-Axis Travel: 450mm Spindle Taper: BT40 Spindle Speed: 8,000 rpm Spindle Motor: 7.5/11 kW AC Spindle Motor ATC 20 Station Carousel Machine Weight: 2,500 kg Supplied with: 20 Station Automatic Tool Changer Electronic Handwheel (MPG) Coolant System Worklight Fully Enclosed Guarding Automatic Lubrication Interlocked Safety Door Three Colour Machine Status Beacon For Sale with Jet Machinery Ltd Dkedpfx Aaozkalfjhsp Jet Machinery Stock No: 79208 Machine Serial Number: J500111T Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Dsdpfovf D Anox Aahjkp

Condition: good (used), Year of construction: 2003, functionality: fully functional, Equipment: chip conveyor, I am selling a FAMUP MCL 120 E machine due to lack of space. Dkjdpfx Ajzi Ddcoahsp

Condition: used, Year of construction: 2005, machine/vehicle number: 107.32.99.158, travel distance X-axis: 530 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, Re-auction due to buyer’s payment default! The machine spindle was replaced in July 2025! TECHNICAL DETAILS Travel range X-axis: 530 mm Travel range Y-axis: 450 mm Travel range Z-axis: 450 mm Rotary table Table diameter: 400 mm Table load capacity: 200 kg Swivel range: degrees Swivel speed: 20 rpm Dkodpfeziz Ncsx Aahjp Rotational speed: 30 rpm Tool holder: SK40 Maximum speed: 12,000 rpm Recommended maximum working feed rate: 15 m/min Rapid traverse speed: 22 m/min Feed force X and Y/Z: 5,000 N Magazine capacity: 30 Maximum tool diameter: 90 mm Maximum tool length: 250 mm (manual 350 mm) Maximum tool weight: 6 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 with digital control Positional tolerance according to DIN/ISO 230-2/97: 0.008 mm Machine weight: 6,500 kg EQUIPMENT RENISHAW MP 12 measuring probe Blum tool monitoring system

Condition: used, Year of construction: 2000, x-travel 760 mm y-travel 550 mm z-travel 300 mm Control RMS6V3.15 tool change unit 25-fach tool taper HSK E40 turning speeds 42.000 U/min table-size 860 x 550 mm table load 800 kg total power requirement 14 kW weight of the machine ca. 5200 kg dimensions of the machine ca. 2,5 x 2,1 x 2,55 m 3-axis high-speed machining centre, Roeders RFM760, year of manufacture 2000, installation in 2001 Key specifications: Roeders RFM760 high-speed machining centre with accessories (tool holders, tool shrink-fitter, etc.). The machine is fully operational, well-maintained, serviced and powered up (battery maintenance). Dkedozhn T Espfx Aahsp • Spindle: Newly fitted in December 2022, in use until March 2023 – Estimated running time approx. 75 hours (de-registered by the company in March 2023) • Control system: Röders, software: RMS6V3.15 (211) • Operating system: Windows NT • Complete system updates approx. 2010 and 2016 • TFT screen The machine has been used exclusively for electrodes (primarily graphite and copper) and finishing of mould inserts – no roughing! The machine is available for viewing at any time and is ready for immediate collection. Specifications for the Roeders RFM 760 high-speed cutting centre - 25-position tool changer with laser tool measurement (length and diameter) - ISO spindle mount: HSK E40 - IR 3D probe (for workpiece measurement) - Dust extraction (graphite) - Cooling unit - Spray cooling for tool / workpiece - Roeders tool shrink-fitter - Fischer MFW-1230/42 spindle (42,000 rpm), new in December 2022 - Fixed chuck, new in 2022 - Accessories: milling cutter chucks, consumables, ...

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 560 mm, workpiece height (max.): 500 mm, workpiece diameter (max.): 730 mm, workpiece weight (max.): 500 kg, total length: 630 mm, table width: 500 mm, table load: 500 kg, Mazak Variaxis 730-5X Simultaneous 5 axis CNC Vertical Machining Centre Model: Variaxis 730-5X S/No.: 567181684 Year: 2005 Country of Origin: Japan Control: Mazatrol 640M 5X ‘X’ axis Travel: 730mm ‘Y’ axis Travel: 850mm ‘Z’ axis Travel: 560mm ‘A’ axis: -120 degrees tp+30 degrees ‘C’ axis: continuous 360 degrees Table Size: 630 x 500mm Max. Table Load: 500 kgs Max. workpiece dia.: 730mm approx. Spindle Taper: ISO 50 Djdpfxozhl Ero Aahekp Spindle Speed: 10,000 RPM

Condition: good (used), Year of construction: 2009, HAAS VF-1 CNC vertical machining center Year: 2009 Table size 660mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds max 7500 rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Weight 2500Kgs Accessories/options: - Haas (Fanuc compatible) CNC Control - Swarf auger Dodpfxjzhk S Do Aahekp - 10 off assorted BT40 toolholders - Automatic lubrication system - Prepared for 4.axis ( wiring and drive is included ) Under power in our warehouse.

Condition: used, Year of construction: 2011, Available immediately from university stock: CNC vertical 4-axis simultaneous machining center VF 1 – HE Full-fledged 4th axis and Haas rotary table HRT 160 Year of manufacture: 2011 Table size: 900 x 450 mm Travel distances: 500 x 400 mm SK 40 tool holder 20-position tool changer Spindle power: 15 kW Spindle speed: 7500 rpm Dedpfx Ajziw E Heahskp Electronic multi-function handwheel on the control panel Coolant system Chip conveyor 4th axis fully functional, programmable to 0.001 degrees HRT-160: Detachable rotary table with a 160 mm clamping surface Programmable PCOOL additional coolant nozzles

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG MORI M1 Pro (12,000 rpm version). In very good condition; the machine can be connected and tested. Dkodpezivv Rsfx Aahsp