Condition: used, Year of construction: 2007, Price: On request - Year: 2007 Dujlq Umhjwfph Ujcot - Documentation available: Yes - CE mark available: Yes - Serial number: 789 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Year of construction: 2015, AUTOMATIC SINGLE-SIDED COMPACT EDGE BANDER K 560R No. AH/118547 MAIN FEATURES GLUE ROLLER: OPTIMAL GLUE JOINT FLUSH MILLING UNIT WITH 3 POSITIONS: FAST CONVERSION BETWEEN THIN, THICK AND SOLID WOOD EDGES TOUCH 7 CONTROL: ONE TOUCH IS ENOUGH TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge bander for gluing the edges with hot melt adhesive on the four sides of straight panels and for subsequent milling. Cold-rolled steel frame in a box construction, for high rigidity and freedom from vibration. Openings with chutes for unloading any remaining chips at the bottom. Pressure beam made of thick-walled steel construction and with steel columns, for a vibration-free structure where the working units are attached. Rollers on the double row feed chain, made of rubber with a high friction coefficient and sliding on bearing-mounted rollers. Device to protect the pressure rollers from any residual chips. Manual adjustment of the pressure unit at the machine inlet, with numerical control. Working units fixed to the pressure beam or mechanically linked to ensure automatic adjustment when changing panel thickness. Working units fixed to the lower longitudinal beam, for a precise reference in relation to the panel. All high-frequency motors are connected via frequency converters (inverters). Tool hood along the entire length of the machine, with polycarbonate window for a good overview of the units during processing. Two separate hoods are provided for access to the working units; The first with electrical locking for the pre-milling unit and gluing unit, the second with electromechanical locking for all other outlets, located on the pivoting control panel in an ergonomic position. The electrical system complies with current regulations. The electrical components are housed in the machine frame, with a door for easy access in case of panel failure. Panel feeding is carried out via a feed chain consisting of high-friction rubber sliders on a 1-1/4" industrial chain. The chain slides on two hardened steel guides, one round and one flat, to ensure linear advancement and protect against lateral misalignment. Manual lubrication of the external bearing roller conveyor positioned along the entire length of the machine; it consists of a telescopic opening system with sliding on linear bearings and plastic rollers with pivot pins. CONTROL SYSTEM "Touch 7" Control System. Main features: – 7" - 16:9 wide color touchscreen – Graphic representation of all processing units and their status (ON/OFF) – Graphic simulation of the machining operations to be carried out on each side of the panel– 60 work programs with direct configuration by the operator– Control of the machining units and automatic activation of the motors– Complete control of the machine through the PLC function and the encoder positioned on the pinion of the feed chain– Setting and regulation of the temperature of the glue pot– Selection of longitudinal and transverse machining without changing the program– Simple and guided diagnostics for easy error correction– Statistics on absolute data and individual machining operations: number of pieces, Duslq Usvvkdmemhcjt

Condition: used, Year of construction: 2005, Price: On request CNC Machining Center SCM Record 125 N Year of construction 2005 CE Serial number - AA1 - 014831 Control: Xilog Plus 4-axle X/Y stroke 3400x1720mm Work table dimensions 3100 mm x 1200 mm 12 Position on tool changer Recording HSK F63 12x vertical drilling 2x horizontal drilling Spindle 7.5 kW 900 - 18000 rpm Includes: Fence & Safety mats & tools Vacuum pump Dslqowfnyvs Umhcsut Brand Becker Type VTLF 250 Capacity 248/300 m³/h Year of construction 2006 Transport dimensions 2200x4200xH2400mmWeight 3600kg - Main motor power [kW]: 7.5 - Working range X [mm]: 3100 - Working range Y [mm]: 1200 - Type: VTLF250 - Capacity [m³/h]: 300 - Year: 2005 - Documentation available: No - Serial number: AA1 - 014831 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Delq Umjvvi I Rshceut

Condition: used, Year of construction: 2018, 5.5 kW main motor, frequency converter (2000-6000 rpm), motorized 2-axis scoring unit with its own drive. Motorized height adjustment in 0.1 mm increments. Motorized angle adjustment in 0.1° increments with digital display. 1090 x 630 mm miter gauge. Narrow and wide extraction hoods with quick-change function. Clamping shoe, sliding block, and manual quick-release clamp. Sliding carriage length 2150 mm (cutting length 2170 mm) - Quick-Scoring equipment packages - Scoring unit adjustable without tools from 2.8 to 3.6 mm - Miter gauge +45° - 45° - On/off switch on the sliding carriage. Dslq Umsvvkm Ujhceut Storage location: Nattheim

Condition: used, Year of construction: 1995, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Material support: Plastic battens, ejecting Measuring system: Scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Weight approx.: 1500 kg Dimensions: 6300 x 1500 x 2900 mm Motor power: 4.4 kW Duelq Umevvkqyshcet Storage location: Nattheim

Condition: used, Year of construction: 1994, Storage location: Nattheim Djlq Uovvkdtomhceut

Condition: used, Year of construction: 2021, 6000 W at 20°C water and 32°C ambient temperature. Dimensions (L/W/H): 55 x 55 x 140 cm Duolq Umhevvi E Aecst Storage location: Supplier

Condition: used, Storage location: Nattheim Djlq Umevvi E Nehcsut

Condition: used, Storage location: Nattheim Dolsvvi Haoq Umhcout

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Duolq Umevvkd Tjhcjt

Condition: used, Year of construction: 1996, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Material support: Plastic battens, ejecting Measuring system: Scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Weight approx.: 1500 kg Dimensions: 6300 x 1500 x 2900 mm Motor power: 4.4 kW Storage location: Nattheim Duslqovvkq Hs Umhcot

Condition: used, Year of construction: 1992, Max. working width: 1350 mm Number of belts: 2-belt 1st unit: Combination sanding unit (11.0 kW motor) 2nd unit: Shoe unit (11.0 kW motor) Cleaning brushes: Yes Control system: Hand control panel Electric/pneumatic belt oscillation: Electric Table stroke: Electric-motorized Table display: Digital Description: With electric segmented sanding shoe Duslq Uevvki Aemhcet Storage location: Nattheim

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Duolq Umhovvkfdscot

Condition: used, Year of construction: 2011, Machining size in X-direction: 2770 mm Machining size in Y-direction: 1220 mm Machining thickness (Z dimension): 80 mm Machine design: Gantry machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector-controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Tool changing stations: 10 Typewriter keyboard: Yes Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table design: Grid table Stop system: Stop cylinder Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Safety protection: Safety mats Storage location: Nattheim Duolsvvi Hteq Umhcst

Condition: used, Year of construction: 1981, Distance between centers: 1300 mm Copy length: 1250 mm Machine center height: 250 mm Center height above support: 160 mm Slide feed speed: 3 m/min Weight: 630 kg Speeds: 500-1000-1500-3000-2100-4200 rpm Hydraulic Dujlq Umhjvvkt Iecet Storage location: Nattheim

Condition: used, Year of construction: 2004, Storage location: Nattheim Dslq Umhjvvi Hyjcjut

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Duelq Umhovvkfqecet Storage location: Nattheim

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Dslqevvki Nj Umhcout Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Djlq Umhsvvkfwjceut Storage location: Nattheim

Condition: used, Year of construction: 2000, Storage location: Nattheim Dusljvvi Ikjq Umhcot

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Duslsvvi Iqoq Umhcet

Condition: used, Year of construction: 2021, Exhibition unit (little used) Lubrication: Grease Max. output speed n2: 4,000 rpm Gear ratio (n1:n2): 1:0.8 Weight: approx. 8 kg Machine connection: HSK F63 Tool holder Usable width: 24 Storage location: Garbsen Djlqjvvi Iwo Umhcout

Condition: used, Year of construction: 2022, in a sturdy galvanized sheet steel construction. Work surface with special folding cardboard filter, an additional post-filter and a filter cassette for extraction in the floor area. All filters can be changed quickly and easily. The internal radial fan, in explosion-proof design, is equipped with a blade wheel made of galvanized sheet steel. The explosion-proof drive motor (EEx nA II) is located outside the air flow and drives the fan directly. A 10 m long supply cable and a plug-circuit breaker combination with a built-in on/off switch are included in the scope of delivery. CAUTION! The switch is not explosion-proof and is only approved for use outside of potentially explosive areas. The fan pressure nozzle is located at the top. The air outlet is vertically upwards. Our paint mist extraction wall complies with the latest regulations of the Immission Control Act. The paint mist extraction wall is designed for installation in Zone 2 painting areas, where the average calculated concentration of flammable solvents is limited to < 25% of the lower explosion limit. Technical data: Max. volume flow: 3500 m3/h Exhaust air nozzle: 300 mm diameter. Work surface: 2000 x 1000 mm Space requirement: 2600 x 920 x 1420 mm high Motor: 1.50 kW, EEx nA II T3, IP 55 1500 min-1, B5, 400 V, 50 Hz ATEX marking Ex II 3 G Sound pressure level: 75 dB(A) Weight: 220 kg Fan: right Folding cardboard filter: 1000 x 2000 mm - 1 piece 2072090518 Filter cut-out for Paint-Star - 1 piece 2072091473 Cassette filter for Paintstar - 1 piece Floor tray PBA 20/24 1 piece Length A: 1984 mm, width B: 2378 mm Access ramp for PBA 20/24 1 piece Energy saving flap pn 300mm Each unit includes an air cylinder, 10 m air hose, and a lever valve with a bracket for hanging a spray gun. The energy-saving flap allows approximately 80% of heat energy and approximately 30% of electrical energy to be saved during setup time. Storage location: Garbsen Duslsvvizdoq Umhcet

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Duelovviytoq Umhcet